P6KE68 - Diotec

P6KE6.8 ... P6KE440CA, P6KE520CA
P6KE6.8 ... P6KE440CA, P6KE520CA
Unidirectional and bidirectional Transient Voltage Suppressor Diodes
Unidirektionale und bidirektionale Spannungs-Begrenzer-Dioden
Version 2014-10-06
±0.05
600 W
Nominal breakdown voltage
Nominale Abbruch-Spannung
6.8...520 V
Plastic case
Kunststoffgehäuse
6.3±0.1
Type
62.5+0.5
-4.5
Ø3
Peak pulse power dissipation
Maximale Verlustleistung
DO-15
(DO-204AC)
Weight approx.
Gewicht ca.
±0.05
Ø 0.8
Dimensions - Maße [mm]
0.4 g
Plastic material has UL classification 94V-0
Gehäusematerial UL94V-0 klassifiziert
Standard packaging taped in ammo pack
Standard Lieferform gegurtet in ammo-Pack
For bidirectional types (add suffix “C” or “CA”), electrical characteristics apply in both directions.
Für bidirektionale Dioden (ergänze Suffix “C” oder “CA”) gelten die elektrischen Werte in beiden Richtungen.
Maximum ratings and Characteristics
Grenz- und Kennwerte
Peak pulse power dissipation (10/1000 µs waveform)
Impuls-Verlustleistung (Strom-Impuls 10/1000 µs)
TA = 25°C
PPPM
Steady state power dissipation
Verlustleistung im Dauerbetrieb
TL = 75°C
PM(AV)
Peak forward surge current, 60 Hz half sine-wave
Stoßstrom für eine 60 Hz Sinus-Halbwelle
TA = 25°C
IFSM
VBR ≤ 200 V
VBR > 200 V
VF
VF
< 3.5 V 2)
< 5.0 V 2)
Junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Tj
TS
-50...+175°C
-50...+175°C
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
RthA
< 30 K/W 2)
Thermal resistance junction to leads
Wärmewiderstand Sperrschicht – Anschlussdraht
RthL
< 15 K/W
Max. instantaneous forward voltage
Augenblickswert der Durchlass-Spannung
1
2
©
IF = 50 A
600 W 1)
5W
100 A 2)
Non-repetitive pulse see curve IPP = f (t) / PPP = f (r)
Höchstzulässiger Spitzenwert eines einmaligen Impulses, siehe Kurve IPP = f (t) / PPP = f (t)
Unidirectional diodes only – Nur für unidirektionale Dioden
http://www.diotec.com/
1
P6KE6.8 ... P6KE440CA, P6KE520CA
Maximum ratings
Type
Typ
Grenzwerte
Breakdown voltage at IT = 1 mA
Abbruch-Spannung bei IT = 1 mA
*) at / bei IT = 10 mA
Stand-off voltage
Sperrspannung
Max. rev. current
Max. Sperrstrom
at / bei VWM
Max. clamping voltage
Max. Begrenzer-Spannung
at / bei IPPM (10/1000 µs)
VBR [V]
VWM [V]
ID [µA]
VC [V]
IPPM [A]
P6KE6.8
6.8 ± 10%
6.12...7.48 *)
5.5
1000
10.8
58.0
P6KE6.8A
6.8 ± 5%
6.45...7.14 *)
5.8
1000
10.5
60.0
P6KE7.5
7.5 ± 10%
6.75...8.25 *)
6.0
500
11.7
53.0
P6KE7.5A
7.5 ± 5%
7.13...7.88 *)
6.4
500
11.3
55.0
P6KE8.2
8.2 ± 10%
7.38...9.02 *)
6.6
200
12.5
50.0
P6KE8.2A
8.2 ± 5%
7.79...8.61 *)
7.0
200
12.1
52.0
P6KE9.1
9.1 ± 10%
8.19...10.0
7.3
50
13.8
45.0
P6KE9.1A
9.1 ± 5%
8.65...9.55
7.7
50
13.4
47.0
P6KE10
10 ± 10%
9.0...11.0
8.1
10
15.0
42.0
P6KE10A
10 ± 5%
9.5...10.5
8.5
10
14.5
43.0
P6KE11
11 ± 10%
9.9...12.1
8.9
5
16.2
38.0
P6KE11A
11 ± 5%
10.5...11.6
9.4
5
15.6
40.0
P6KE12
12 ± 10%
10.8...13.2
9.7
5
17.3
36.0
P6KE12A
12 ± 5%
11.4...12.6
10.2
5
16.7
37.0
P6KE13
13 ± 10%
11.7...14.3
10.5
5
19.0
33.0
P6KE13A
13 ± 5%
12.4...13.7
11.1
5
18.2
34.0
P6KE15
15 ± 10%
13.5...16.5
12.1
5
22.0
28.0
P6KE15A
15 ± 5%
14.3...15.8
12.8
5
21.2
29.0
P6KE16
16 ± 10%
14.4...17.6
12.9
5
23.5
26.0
P6KE16A
16 ± 5%
15.2...16.8
13.6
5
22.5
28.0
P6KE18
18 ± 10%
16.2...19.8
14.5
5
26.5
23.0
P6KE18A
18 ± 5%
17.1...18.9
15.3
5
25.2
25.0
P6KE20
20 ± 10%
18.0...22.0
16.2
5
29.1
21.0
P6KE20A
20 ± 5%
19.0...21.0
17.1
5
27.7
22.0
P6KE22
22 ± 10%
19.8...24.2
17.8
5
31.9
19.0
P6KE22A
22 ± 5%
20.9...23.1
18.8
5
30.6
20.0
P6KE24
24 ± 10%
21.6...26.4
19.4
5
34.7
18.0
P6KE24A
24 ± 5%
22.8...25.2
20.5
5
33.2
19.0
P6KE27
27 ± 10%
24.3...29.7
21.8
5
39.1
16.0
P6KE27A
27 ± 5%
25.7...28.4
23.1
5
37.5
16.8
P6KE30
30 ± 10%
27.0...33.0
24.3
5
43.5
14.0
P6KE30A
30 ± 5%
28.5...31.5
25.6
5
41.4
15.0
P6KE33
33 ± 10%
29.7...36.3
26.8
5
47.7
13.0
P6KE33A
33 ± 5%
31.4...34.7
28.2
5
45.7
13.8
P6KE36
36 ± 10%
32.4...39.6
29.1
5
52.0
12.0
P6KE36A
36 ± 5%
34.2...37.8
30.8
5
49.9
12.6
P6KE39
39 ± 10%
35.1...42.9
31.6
5
56.4
11.1
P6KE39A
39 ± 5%
37.1...41.0
33.3
5
53.9
11.6
P6KE43
43 ± 10%
38.7...47.3
34.8
5
61.9
10.0
P6KE43A
43 ± 5%
40.9...45.2
36.8
5
59.3
10.6
P6KE47
47 ± 10%
42.3...51.7
38.1
5
67.8
9.2
P6KE47A
47 ± 5%
44.7...49.4
40.2
5
64.8
9.7
P6KE51
51 ± 10%
45.9...56.1
41.3
5
73.5
8.5
P6KE51A
51 ± 5%
48.5...53.6
43.6
5
70.1
8.9
2
http://www.diotec.com/
©
P6KE6.8 ... P6KE440CA, P6KE520CA
Maximum ratings
Type
Typ
Grenzwerte
Breakdown voltage at IT = 1 mA
Abbruch-Spannung bei IT = 1 mA
*) at / bei IT = 10 mA
Stand-off voltage
Sperrspannung
Max. rev. current
Max. Sperrstrom
at / bei VWM
Max. clamping voltage
Max. Begrenzer-Spannung
at / bei IPPM (10/1000 µs)
VBR [V]
VWM [V]
ID [µA]
VC [V]
IPPM [A]
P6KE56
56 ± 10%
50.4...61.6
45.4
5
81
7.8
P6KE56A
56 ± 5%
53.2...58.8
47.8
5
77
8.1
P6KE62
62 ± 10%
55.8...68.8
50.2
5
89
7.0
P6KE62A
62 ± 5%
58.9...65.1
53.0
5
85
7.4
P6KE68
68 ± 10%
61.2...74.8
55.1
5
98
6.4
P6KE68A
68 ± 5%
64.6...71.4
58.1
5
92
6.8
P6KE75
75 ± 10%
67.5...82.5
60.7
5
108
5.8
P6KE75A
75 ± 5%
71.3...78.8
64.1
5
103
6.1
P6KE82
82 ± 10%
73.8...90.2
66.4
5
118
5.3
P6KE82A
82 ± 5%
77.9...86.1
70.1
5
113
5.5
P6KE91
91 ± 10%
81.9...100
73.7
5
131
4.8
P6KE91A
91 ± 5%
86.5...95.5
77.8
5
125
5.0
P6KE100
100 ± 10%
90.0...110
81.0
5
144
4.3
P6KE100A
100 ± 5%
95.0...105
85.5
5
137
4.5
P6KE110
110 ± 10%
99.0...121
89.2
5
158
3.9
P6KE110A
110 ± 5%
105...116
94.0
5
152
4.1
P6KE120
120 ± 10%
108...132
97.2
5
173
3.6
P6KE120A
120 ± 5%
114...126
102
5
165
3.8
P6KE130
130 ± 10%
117...143
105
5
187
3.3
P6KE130A
130 ± 5%
124...137
111
5
179
3.5
P6KE150
150 ± 10%
135...165
121
5
215
2.9
P6KE150A
150 ± 5%
143...158
128
5
207
3.0
P6KE160
160 ± 10%
144...176
130
5
230
2.7
P6KE160A
160 ± 5%
152...168
136
5
219
2.8
P6KE170
170 ± 10%
153...187
138
5
244
2.5
P6KE170A
170 ± 5%
162...179
145
5
234
2.6
P6KE180
180 ± 10%
162...198
146
5
258
2.4
P6KE180A
180 ± 5%
171...189
154
5
246
2.5
P6KE200
200 ± 10%
180...220
162
5
287
2.1
P6KE200A
200 ± 5%
190...210
171
5
274
2.2
P6KE220
220 ± 10%
198...242
175
5
344
1.8
P6KE220A
220 ± 5%
209...231
185
5
328
1.9
P6KE250
250 ± 10%
225...275
202
5
360
1.7
P6KE250A
250 ± 5%
237...263
214
5
344
1.8
P6KE300
300 ± 10%
270...330
243
5
430
1.4
P6KE300A
300 ± 5%
285...315
256
5
414
1.5
P6KE350
350 ± 10%0
315...385
284
5
504
1.2
P6KE350A
350 ± 5%
332...368
300
5
482
1.3
P6KE400
400 ± 10%
360...440
324
5
574
1.0
P6KE400A
400 ± 5%
380...420
342
5
548
1.1
P6KE440
440 ± 10%
396...484
356
5
631
0.99
P6KE440A
440 ± 5%
418...462
376
5
602
1.04
P6KE520C
520 ± 10%
470...570
423
5
745
0.81
P6KE520CA
520 ± 5%
494...546
444
5
711
0.84
©
http://www.diotec.com/
3
P6KE6.8 ... P6KE440CA, P6KE520CA
120
[%]
tr = 10 µs
100
100
[%]
80
80
60
60
40
40
IPP
IPP
20
20
PPP
PPP
0
0
0
TA
100
50
150
[°C]
IPPM/2
PPPM/2
tP
0
1
2
3
[ms] 4
10/1000µs - pulse waveform
10/1000µs - Impulsform
1
Peak pulse power/current vs. ambient temperature )
Impuls-Spitzenleistung/Strom vs. Umgebungstemp.1)
1
102
[kW]
10
1
PPP
0.1
0.1µs
tP
1µs
10µs
100µs
1ms
10ms
Non repetitive peak pulse power versus pulse width (10/1000 wave form)
Einzel-Impuls-Spitzenleistung in Abh. von der Pulsdauer (10/1000-Impuls)
The range of type numbers is graded to the international E 24 standard. The standard tolerance of the
breakdown voltage for each type is ± 10%. Suffix “A” denotes a tolerance of ± 5% for the breakdown
voltage.
e.g.:
P6KE51C = bidirectional diode, VBR = 51 V (± 10%), VWM ≥ 41.3 V at ID = 5 μA
P6KE9.1A = unidirectional diode, VBR = 9.1 V (± 5%), VWM ≥ 7.7 V at ID = 50 μA
Die Abstufung der Typen innerhalb der Reihe entspricht dem internationalen E 24-Standard. Die Toleranz der
Abbruchspannung jedes einzelnen Typs beträgt in der Standardausführung ± 10%. Suffix “A” kennzeichnet
eine Toleranz der Abbruchspannung von ± 5%.
1
4
Valid, if leads are kept at ambient temperature at a distance of 10 mm from case
Gültig, wenn die Anschlussdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden
http://www.diotec.com/
©