1.5KE6.8 ... 1.5KE440A 1.5KE6.8C ... 1.5KE440CA Diotec Unidirectional and bidirectional Transient Voltage Suppressor Diodes Ø 5.4 ±0.1 Unidirektionale und bidirektionale Spannungs-Begrenzer-Dioden Peak pulse power dissipation Impuls-Verlustleistung 1500 W Nominal breakdown voltage Nenn-Arbeitsspannung 6.8...440 V Plastic case – Kunststoffgehäuse Ø 1.2 ±0.05 Ø 5.6 x 7.5 [mm] Weight approx. – Gewicht ca. 1.4 g Plastic material has UL classification 94V-0 Gehäusematerial UL94V-0 klassifiziert Dimensions / Maße in mm Standard packaging taped in ammo pack Standard Lieferform gegurtet in Ammo-Pack For bidirectional types use suffix “C” or “CA” Suffix “C” oder “CA” für bidirektionale Typen Maximum ratings Grenzwerte Peak pulse power dissipation (10/1000 µs waveform) Impuls-Verlustleistung (Strom-Impuls 10/1000 µs) TA = 25 °C PPPM Steady state power dissipation Verlustleistung im Dauerbetrieb TA = 25 °C PM(AV) Peak forward surge current, 60 Hz half sine-wave Stoßstrom für eine 60 Hz Sinus-Halbwelle TA = 25°C IFSM Operating junction temperature – Sperrschichttemperatur Storage temperature – Lagerungstemperatur Tj TS Characteristics Max. instantaneous forward voltage Augenblickswert der Durchlaßspannung see page 17 siehe Seite 17 1500 W 1) 5 W 2) 200 A 3) – 50…+175°C – 50…+175°C Kennwerte IF = 50 A VBR 200 V VBR > 200 V Thermal resistance junction to ambient air Wärmewiderstand Sperrschicht – umgebende Luft VF VF RthA < 3.5 V 3) < 5.0 V 3) < 25 K/W 2) 1 ) Non-repetitive current pulse see curve I PPM = f (tr) Höchstzulässiger Spitzenwert eines einmaligen Strom-Impulses, siehe Kurve I PPM = f (tr) 2 ) Valid, if leads are kept at ambient temperature at a distance of 10 mm from case Gültig, wenn die Anschlußdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden 3 ) Unidirectional diodes only – nur für unidirektionale Dioden 166 01.01.99 1.5KE6.8 ... 1.5KE440A 1.5KE6.8C ... 1.5KE440CA Diotec Maximum ratings Type Typ 1.5KE6.8 1.5KE6.8A 1.5KE7.5 1.5KE7.5A 1.5KE8.2 1.5KE8.2A 1.5KE9.1 1.5KE9.1A 1.5KE10 1.5KE10A 1.5KE11 1.5KE11A 1.5KE12 1.5KE12A 1.5KE13 1.5KE13A 1.5KE15 1.5KE15A 1.5KE16 1.5KE16A 1.5KE18 1.5KE18A 1.5KE20 1.5KE20A 1.5KE22 1.5KE22A 1.5KE24 1.5KE24A 1.5KE27 1.5KE27A 1.5KE30 1.5KE30A 1.5KE33 1.5KE33A 1.5KE36 1.5KE36A 1.5KE39 1.5KE39A 1.5KE43 1.5KE43A 1.5KE47 1.5KE47A 1.5KE51 1.5KE51A 01.01.99 Breakdown voltage at IT = 1 mA Arbeitsspannung bei IT = 1 mA *) tested at / gemessen bei 10 mA VBR [V] 6.8 ± 10% 6.12...7.48 *) 6.8 ± 5% 6.45...7.14 *) 7.5 ± 10% 6.75...8.25 *) 7.5 ± 5% 7.13...7.88 *) 8.2 ± 10% 7.38...9.02 *) 8.2 ± 5% 7.79...8.61 *) 9.1 ± 10% 8.19...10.0 9.1 ± 5% 8.65...9.55 10 ± 10% 9.0...11.0 10 ± 5% 9.5...10.5 11 ± 10% 9.9...12.1 11 ± 5% 10.5...11.6 12 ± 10% 10.8...13.2 12 ± 5% 11.4...12.6 13 ± 10% 11.7...14.3 13 ± 5% 12.4...13.7 15 ± 10% 13.5...16.5 15 ± 5% 14.3...15.8 16 ± 10% 14.4...17.6 16 ± 5% 15.2...16.8 18 ± 10% 16.2...19.8 18 ± 5% 17.1...18.9 20 ± 10% 18.0...22.0 20 ± 5% 19.0...21.0 22 ± 10% 19.8...24.2 22 ± 5% 20.9...23.1 24 ± 10% 21.6...26.4 24 ± 5% 22.8...25.2 27 ± 10% 24.3...29.7 27 ± 5% 25.7...28.4 30 ± 10% 27.0...33.0 30 ± 5% 28.5...31.5 33 ± 10% 29.7...36.3 33 ± 5% 31.4...34.7 36 ± 10% 32.4...39.6 36 ± 5% 34.2...37.8 39 ± 10% 35.1...42.9 39 ± 5% 37.1...41.0 43 ± 10% 38.7...47.3 43 ± 5% 40.9...45.2 47 ± 10% 42.3...51.7 47 ± 5% 44.7...49.4 51 ± 10% 45.9...56.1 51 ± 5% 48.5...53.6 Grenzwerte Max. stand-off voltage at leakage current Max. Sperrspannung bei Sperrstrom VWM [V] 5.5 5.8 6.0 6.4 6.6 7.0 7.3 7.7 8.1 8.5 8.9 9.4 9.7 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 ID [µA] 1000 1000 500 500 200 200 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Max. clamping voltage at 10/1000µs-pulse current Max. Begrenzerspannung bei 10/1000µs-Stromimp. VC [V] 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.5 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 IPPM [A] 145 150 134 139 126 130 114 117 105 108 97 100 91 94 82 86 71 74 67 70 59 60 54 56 49 51 45 47 40 42 36 38 33 34 30 31 27 29 25 26 23 24 21 22 167 1.5KE6.8 ... 1.5KE440A 1.5KE6.8C ... 1.5KE440CA Diotec Maximum ratings Type Typ 1.5KE56 1.5KE56A 1.5KE62 1.5KE62A 1.5KE68 1.5KE68A 1.5KE75 1.5KE75A 1.5KE82 1.5KE82A 1.5KE91 1.5KE91A 1.5KE100 1.5KE100A 1.5KE110 1.5KE110A 1.5KE120 1.5KE120A 1.5KE130 1.5KE130A 1.5KE150 1.5KE150A 1.5KE160 1.5KE160A 1.5KE170 1.5KE170A 1.5KE180 1.5KE180A 1.5KE200 1.5KE200A 1.5KE220 1.5KE220A 1.5KE250 1.5KE250A 1.5KE300 1.5KE300A 1.5KE350 1.5KE350A 1.5KE400 1.5KE400A 1.5KE440 1.5KE440A Breakdown voltage at IT = 1 mA Arbeitsspannung bei IT = 1 mA *) tested at / gemessen bei 10 mA VBR [V] 56 ± 10% 50.4...61.6 56 ± 5% 53.2...58.8 62 ± 10% 55.8...68.8 62 ± 5% 58.9...65.1 68 ± 10% 61.2...74.8 68 ± 5% 64.6...71.4 75 ± 10% 67.5...82.5 75 ± 5% 71.3...78.8 82 ± 10% 73.8...90.2 82 ± 5% 77.9...86.1 91 ± 10% 81.9...100 91 ± 5% 86.5...95.5 100 ± 10% 90.0...110 100 ± 5% 95.0...105 110 ± 10% 99.0...121 110 ± 5% 105...116 120 ± 10% 108...132 120 ± 5% 114...126 130 ± 10% 117...143 130 ± 5% 124...137 150 ± 10% 135...165 150 ± 5% 143...158 160 ± 10% 144...176 160 ± 5% 152...168 170 ± 10% 153...187 170 ± 5% 162...179 180 ± 10% 162...198 180 ± 5% 171...189 200 ± 10% 180...220 200 ± 5% 190...210 220 ± 10% 198...242 220 ± 5% 209...231 250 ± 10% 225...275 250 ± 5% 237...267 300 ± 10% 270...330 300 ± 5% 285...315 350 ± 10% 315...385 350 ± 5% 332...368 400 ± 10% 360...440 400 ± 5% 380...420 440 ± 10% 396...484 440 ± 5% 418...462 Grenzwerte Max. stand-off voltage at leakage current Max. Sperrspannung bei Sperrstrom VWM [V] 45.4 43.6 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 256 284 300 324 342 356 376 ID [µA] 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Max. clamping voltage at 10/1000µs-pulse current Max. Begrenzerspannung bei 10/1000µs-Stromimp. VC [V] 80.5 77.0 89.0 85.0 98.0 92.0 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 602 IPPM [A] 19 20 17 18 16.0 17.0 14.0 15.0 13.0 13.9 12.0 12.6 10.9 11.4 9.9 10.3 9.1 9.5 8.4 8.7 7.3 7.6 6.8 7.1 6.4 6.7 6.1 6.4 5.4 5.7 4.5 4.8 4.3 4.5 3.6 3.8 3.1 3.2 2.7 2.8 2.4 2.6 For bidirectional types (suffix “C”), electrical characteristics apply in both directions. Für bidirektionale Dioden (Suffix “C”) gelten die elektrischen Werte in beiden Richtungen. 168 01.01.99 1.5KE6.8 ... 1.5KE440A 1.5KE6.8C ... 1.5KE440CA Non repetitive current pulse (10/1000µs waveform) Höchstzulässiger Spitzenwert eines einmaligen 10/1000µs - Stromimpulses Diotec Peak pulse power (PPPM) or current (IPPM) derating Impulsverlustleistung oder max. Stromimpuls in Abhängigkeit von der Umgebungstemperatur The order of type numbers is graded to the international E 24 standard. The standard tolerance of the breakdown voltage for each type is ± 10%. Suffix “A” denotes a tolerance of ± 5% for the breakdown voltage. e.g.: 1.5KE160CA = bidirectional diode, VBR = 160V (± 5%) 1.5KE27A = unidirectional diode, VBR = 27V (± 5%) Die Abstufung der Typen innerhalb der Reihe entspricht dem internationalen E 24-Standard. Die Toleranz der Arbeitsspannung jedes einzelnen Typs beträgt in der Standardausführung ± 10%. Suffix “A” kennzeichnet eine Toleranz der Arbeitsspannung von ± 5%. z.B.: 1.5KE160CA = bidirektionale Diode, VBR = 160V (± 5%) 1.5KE27A = unidirektionale Diode, VBR = 27V (± 5%) 01.01.99 169