DIOTEC P4KE15

P4 KE 6.8 ... P4 KE 440CA
Unidirectional and bidirectional
Transient Voltage Suppressor Diodes
Unidirektionale und bidirektionale
Spannungs-Begrenzer-Dioden
Peak pulse power dissipation
Impuls-Verlustleistung
400 W
Nominal breakdown voltage
Nominale Abbruch-Spannung
Plastic case – Kunststoffgehäuse
6.8...440 V
DO-15 (DO-204AC)
Weight approx. – Gewicht ca.
0.4 g
Plastic material has UL classification 94V-0
Gehäusematerial UL94V-0 klassifiziert
Dimensions / Maße in mm
Standard packaging taped in ammo pack
Standard Lieferform gegurtet in Ammo-Pack
see page 16
siehe Seite 16
For bidirectional types (suffix “C” or “CA”), electrical characteristics apply in both directions.
Für bidirektionale Dioden (Suffix “C” oder “CA”) gelten die el. Werte in beiden Richtungen.
Maximum ratings and Characteristics
Kenn- und Grenzwerte
Peak pulse power dissipation (10/1000 :s waveform)
Impuls-Verlustleistung (Strom-Impuls 10/1000 :s)
TA = 25/C
PPPM
Steady state power dissipation
Verlustleistung im Dauerbetrieb
TA = 25/C
PM(AV)
1 W 2)
Peak forward surge current, 60 Hz half sine-wave
Stoßstrom für eine 60 Hz Sinus-Halbwelle
TA = 25/C
IFSM
40 A 3)
Max. instantaneous forward voltage
Augenblickswert der Durchlaßspannung
VBR # 200 V
VBR > 200 V
VF
VF
< 3.0 V 3)
< 6.5 V 3)
Operating junction temperature – Sperrschichttemperatur
Storage temperature – Lagerungstemperatur
Tj
TS
– 50…+175/C
– 50…+175/C
Thermal resistance junction to ambient air
Wärmewiderstand Sperrschicht – umgebende Luft
RthA
< 45 K/W 2)
Thermal resistance junction to lead
Wärmewiderstand Sperrschicht – Anschlußdraht
RthL
< 15 K/W
IF = 25 A
400 W 1)
1
) Non-repetitive current pulse see curve IPPM = f (tr)
Höchstzulässiger Spitzenwert eines einmaligen Strom-Impulses, siehe Kurve IPPM = f (tr)
2
) Valid, if leads are kept at ambient temperature at a distance of 10 mm from case
Gültig, wenn die Anschlußdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden
3
) Unidirectional diodes only – Nur für unidirektionale Dioden
07.01.2003
1
P4 KE 6.8 ... P4 KE 440CA
Maximum ratings
Type
Typ
P4 KE6.8
P4 KE6.8A
P4 KE7.5
P4 KE7.5A
P4 KE8.2
P4 KE8.2A
P4 KE9.1
P4 KE9.1A
P4 KE10
P4 KE10A
P4 KE11
P4 KE11A
P4 KE12
P4 KE12A
P4 KE13
P4 KE13A
P4 KE15
P4 KE15A
P4 KE16
P4 KE16A
P4 KE18
P4 KE18A
P4 KE20
P4 KE20A
P4 KE22
P4 KE22A
P4 KE24
P4 KE24A
P4 KE27
P4 KE27A
P4 KE30
P4 KE30A
P4 KE33
P4 KE33A
P4 KE36
P4 KE36A
P4 KE39
P4 KE39A
P4 KE43
P4 KE43A
P4 KE47
P4 KE47A
P4 KE51
2
Grenzwerte
Breakdown voltage at IT = 1 mA
Abbruch-Spanng. bei IT = 1 mA
*) at / bei IT = 10 mA
Stand-off
voltage
Sperrspg.
Max. rev. current
Max. Sperrstrom
at / bei VWM
VBR [V]
VWM [V]
ID [:A]
VC [V]
IPPM [A]
5.5
5.8
6.0
6.4
6.6
7.0
7.3
7.7
8.1
8.5
8.9
9.4
9.7
10.2
10.5
11.1
12.1
12.8
12.9
13.6
14.5
15.3
16.2
17.1
17.8
18.8
19.4
20.5
21.8
23.1
24.3
25.6
26.8
28.2
29.1
30.8
31.6
33.3
34.8
36.8
38.1
40.2
41.3
1000
1000
500
500
200
200
50
50
10
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
10.8
10.5
11.7
11.3
12.5
12.1
13.8
13.4
15.0
14.5
16.2
15.6
17.3
16.7
19.0
18.2
22.0
21.2
23.5
22.5
26.5
25.5
29.1
27.7
31.9
30.6
34.7
33.2
39.1
37.5
43.5
41.4
47.7
45.7
52.0
49.9
56.4
53.9
61.9
59.3
67.8
64.8
73.5
38.0
40.0
35.0
37.0
33.0
34.0
30.0
31.0
28.0
29.0
26.0
27.0
24.0
25.0
22.0
23.0
19.0
21.0
17.8
18.6
16.0
16.5
14.0
15.0
13.0
13.7
12.0
12.6
10.7
11.0
9.6
10.0
8.8
9.0
8.0
8.4
7.4
7.7
6.7
7.0
6.2
6.4
5.7
6.8 ± 10%
6.8 ± 5%
7.5 ± 10%
7.5 ± 5%
8.2 ± 10%
8.2 ± 5%
9.1 ± 10%
9.1 ± 5%
10 ± 10%
10 ± 5%
11 ± 10%
11 ± 5%
12 ± 10%
12 ± 5%
13 ± 10%
13 ± 5%
15 ± 10%
15 ± 5%
16 ± 10%
16 ± 5%
18 ± 10%
18 ± 5%
20 ± 10%
20 ± 5%
22 ± 10%
22 ± 5%
24 ± 10%
24 ± 5%
27 ± 10%
27 ± 5%
30 ± 10%
30 ± 5%
33 ± 10%
33 ± 5%
36 ± 10%
36 ± 5%
39 ± 10%
39 ± 5%
43 ± 10%
43 ± 5%
47 ± 10%
47 ± 5%
51 ± 10%
6.12...7.48 *)
6.45...7.14 *)
6.75...8.25 *)
7.13...7.88 *)
7.38...9.02 *)
7.79...8.61 *)
8.19...10.0
8.65...9.55
9.0...11.0
9.5...10.5
9.9...12.1
10.5...11.6
10.8...13.2
11.4...12.6
11.7...14.3
12.4...13.7
13.5...16.5
14.3...15.8
14.4...17.6
15.2...16.8
16.2...19.8
17.1...18.9
18.0...22.0
19.0...21.0
19.8...24.2
20.9...23.1
21.6...26.4
22.8...25.2
24.3...29.7
25.7...28.4
27.0...33.0
28.5...31.5
29.7...36.3
31.4...34.7
32.4...39.6
34.2...37.8
35.1...42.9
37.1...41.0
38.7...47.3
40.9...45.2
42.3...51.7
44.7...49.4
45.9...56.1
Max. clamping voltage
Max. Begrenzerspanng.
at / bei IPPM (10/1000:s)
F:\Data\Wp\DatBlatt\Einzelblätter\p4ke.wpd
P4 KE 6.8 ... P4 KE 440CA
Maximum ratings
Type
Typ
P4 KE51A
P4 KE56
P4 KE56A
P4 KE62
P4 KE62A
P4 KE68
P4 KE68A
P4 KE75
P4 KE75A
P4 KE82
P4 KE82A
P4 KE91
P4 KE91A
P4 KE100
P4 KE100A
P4 KE110
P4 KE110A
P4 KE120
P4 KE120A
P4 KE130
P4 KE130A
P4 KE150
P4 KE150A
P4 KE160
P4 KE160A
P4 KE170
P4 KE170A
P4 KE180
P4 KE180A
P4 KE200
P4 KE200A
P4 KE220
P4 KE220A
P4 KE250
P4 KE250A
P4 KE300
P4 KE300A
P4 KE350
P4 KE350A
P4 KE400
P4 KE400A
P4 KE440
P4 KE440A
07.01.2003
Grenzwerte
Breakdown voltage at IT = 1 mA
Abbruch-Spanng. bei IT = 1 mA
*) at / bei IT = 10 mA
Stand-off
voltage
Sperrspg.
Max. rev. current
Max. Sperrstrom
at / bei VWM
VBR [V]
VWM [V]
ID [:A]
VC [V]
IPPM [A]
43.6
45.4
47.8
50.2
53.0
55.1
58.1
60.7
64.1
66.4
70.1
73.7
77.8
81.0
85.5
89.2
94.0
97.2
102
105
111
121
128
130
136
138
145
146
154
162
171
175
185
202
214
243
256
284
300
324
342
356
376
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
70.1
80.5
77.0
89.0
85.0
98.0
92.0
108
103
118
113
131
125
144
137
158
152
173
165
187
179
215
207
230
219
244
234
258
246
287
274
344
328
360
344
430
414
504
482
574
548
631
602
6.0
5.2
5.4
4.7
5.0
4.2
4.5
3.8
4.0
3.5
3.7
3.2
3.3
2.9
3.0
2.6
2.7
2.4
2.5
2.2
2.3
1.9
2.0
1.8
1.9
1.7
1.8
1.6
1.7
1.4
1.5
1.2
1.3
1.1
1.2
0.97
1.0
0.83
0.87
0.73
0.76
0.66
0.69
51 ± 5%
56 ± 10%
56 ± 5%
62 ± 10%
62 ± 5%
68 ± 10%
68 ± 5%
75 ± 10%
75 ± 5%
82 ± 10%
82 ± 5%
91 ± 10%
91 ± 5%
100 ± 10%
100 ± 5%
110 ± 10%
110 ± 5%
120 ± 10%
120 ± 5%
130 ± 10%
130 ± 5%
150 ± 10%
150 ± 5%
160 ± 10%
160 ± 5%
170 ± 10%
170 ± 5%
180 ± 10%
180 ± 5%
200 ± 10%
200 ± 5%
220 ± 10%
220 ± 5%
250 ± 10%
250 ± 5%
300 ± 10%
300 ± 5%
350 ± 10%
350 ± 5%
400 ± 10%
400 ± 5%
440 ± 10%
440 ± 5%
48.5...53.6
50.4...61.6
53.2...58.8
55.8...68.8
58.9...65.1
61.2...74.8
64.6...71.4
67.5...82.5
71.3...78.8
73.8...90.2
77.9...86.1
81.9...100
86.5...95.5
90.0...110
95.0...105
99.0...121
105...116
108...132
114...126
117...143
124...137
135...165
143...158
144...176
152...168
153...187
162...179
162...198
171...189
180...220
190...210
198...242
209...231
225...275
237...263
270...330
285...315
315...385
332...368
360...440
380...420
396...484
418...462
Max. clamping voltage
Max. Begrenzerspanng.
at / bei IPPM (10/1000:s)
3
P4 KE 6.8 ... P4 KE 440CA
1
The order of type numbers is graded to the international E 24 standard. The standard tolerance of
the breakdown voltage for each type is ± 10%. Suffix “A” denotes a tolerance of ± 5%.
e.g.: P4KE160C = bidirectional diode, VBR = 160 V (± 10%), VWM $ 130 V at ID = 5 :A
P4KE10A = unidirectional diode, VBR = 10V (± 5%), VWM $ 8.1 V at ID = 10 :A
Die Abstufung der Typen innerhalb der Reihe entspricht dem internationalen E 24-Standard. Die
Toleranz der Arbeitsspannung jedes einzelnen Typs beträgt in der Standardausführung ± 10%.
Suffix “A” kennzeichnet eine Toleranz von ± 5%.
z.B.: P4KE160C = bidirectionale Diode, VBR = 160 V (± 10%), VWM $ 130 V bei ID = 5 :A
P4KE10A = unidirectionale Diode, VBR = 10V (± 5%), VWM $ 8.1 V bei ID = 10 :A
1
) Valid, if leads are kept at ambient temperature at a distance of 10 mm from case
Gültig, wenn die Anschlußdrähte in 10 mm Abstand von Gehäuse auf Umgebungstemperatur gehalten werden
4
F:\Data\Wp\DatBlatt\Einzelblätter\p4ke.wpd