apm1010 BT4.0 Single Mode Module Preliminary Data Sheet apm1010 BT4.0 Single Mode Module y apm1010 module is a full integrated single-mode APPLICATIONS market. It integrated CSR1010, RF matching circuit, crystal and EEPROM into a surface mount module with a compact size of 15 × 15 × 2.45 mm. It supports all Bluetooth low Energy profiles. A customized or default apm1010 base on customer’s request. The module is also well tested and calibrated before shipping to customer. These advantages not only reduce the complication at customer’s production line, but also reduce the customer development risk and cost greatly. GENERAL FEATURES smartphone, tablet and personal computing devices including Apple iPhone, iPad, iPod and Mac products and Android devices. Bluetooth low energy consume approximately 1/20th of co nf id profiles can pre-loaded into the built-in memory of Bluetooth Smart enables connectivity and data transfer to en Bluetooth low energy module for the Bluetooth Smart tia l footprint: 15×15×2.45 mm DESCRIPTION the power of Bluetooth Basic Rate. With profiles for health and fitness sensors, watches, keyboards, mice and remote controls, the typical Bluetooth Smart applications includes: ■ HID: keyboards, mice, touchpads, remote controls ■ Sports and fitness sensors: heart rate, runner speed and cadence, cycle speed and cadence Bluetooth® v4.0 specification y 7dBm Bluetooth low energy maximum transmit ■ Health sensors: blood pressure, thermometer and output power glucose meters m m y -92dBm Bluetooth low energy receive ■ Mobile accessories: watches, proximity tags, alert y Support for Bluetooth v4.0 specification host stack tags and camera controls including ATT, GATT, SMP, L2CAP, GAP ■ Smart home: heating control and lighting control co y <600nA current consumption in dormant mode y 32kHz and 16MHz crystal or system clock y Programmable general purpose PIO controller y 10-bit ADC & 12 digital PIOs & 3 analogue AIOs & APPEARANCE m y ap UART y I²C / SPI for EEPROM / flash memory ICs and peripherals y Debug SPI & 4 PWM modules y Wake-up interrupt and watchdog timer Page 1 of 13 apm Communication, Inc. – TEL: 886-3-666-1188 – FAX: 886-3-666-8033 Website: http://www.apmcomm.com – E-mail: [email protected] apmcomm Proprietary and Confidential – Product information is subject to change without notice. – May 28, 2014 apm1010 BT4.0 Single Mode Module Preliminary Data Sheet REVISION HISTORY Release Author 2014-Mar-28 1.0 Tu Description Initial release ap m co m m co nf id en tia l Date Page 2 of 13 apm Communication, Inc. – TEL: 886-3-666-1188 – FAX: 886-3-666-8033 Website: http://www.apmcomm.com – E-mail: [email protected] apmcomm Proprietary and Confidential – Product information is subject to change without notice. – May 28, 2014 apm1010 BT4.0 Single Mode Module Preliminary Data Sheet TABLE OF CONTENTS 1 HARDWARE SPECIFICATION........................................................................................................................... 4 GENERAL SPECIFICATION ............................................................................................................................... 4 1.2 BLOCK DIAGRAM ............................................................................................................................................ 4 1.3 PINOUT ............................................................................................................................................................ 5 1.3.1 PIN ASSIGNMENT (TOP VIEW) ........................................................................................................................ 5 1.3.2 PIN DESCRIPTION............................................................................................................................................ 5 ABSOLUTE MAXIMUM RATING ...................................................................................................................... 7 en 2 tia l 1.1 RECOMMENDED OPERATING CONDITION ...................................................................................................... 7 2.1 RF SPECIFICATION ............................................................................................................................................. 8 co nf id 3 CONDITION: VDD_BAT=VDD_PAD=+3.3V, TOP=+25°C............................................................................ 8 3.1 3.1.1 CHANNEL 0 (2402MHZ) .................................................................................................................................. 8 3.1.2 CHANNEL 18 (2442MHZ) ................................................................................................................................ 8 3.1.3 CHANNEL 39 (2480MHZ) ................................................................................................................................ 9 BLUETOOTH CURRENT CONSUMPTION ........................................................................................................ 10 3.2 4 MECHANICAL SPECIFICATION .................................................................................................................... 11 PACKAGE OUTLINE ....................................................................................................................................... 11 ASSEMBLY GUIDELINE ................................................................................................................................... 12 5.1 RECOMMENDED MOUNTING PAD DESIGN (TOP VIEW) ............................................................................... 12 5.2 BAKING CONDITION RECOMMENDATION BEFORE IR REFLOW ................................................................... 13 RECOMMENDED TEMPERATURE REFLOW PROFILE .................................................................................... 13 ap m 5.3 co 5 m m 4.1 Page 3 of 13 apm Communication, Inc. – TEL: 886-3-666-1188 – FAX: 886-3-666-8033 Website: http://www.apmcomm.com – E-mail: [email protected] apmcomm Proprietary and Confidential – Product information is subject to change without notice. – May 28, 2014 apm1010 BT4.0 Single Mode Module Preliminary Data Sheet 1 Hardware Specification 1.1 General Specification Bluetooth part: Single Mode BTLe Host Interface UART, SPI, I2C, AIO Frequency Band 2400 to 2480MHz (40 channel) Modulation GFSK Antenna External single antenna support. The output impedance is 50Ω. en Block Diagram ap m co m m co nf id 1.2 tia l Network Standard Page 4 of 13 apm Communication, Inc. – TEL: 886-3-666-1188 – FAX: 886-3-666-8033 Website: http://www.apmcomm.com – E-mail: [email protected] apmcomm Proprietary and Confidential – Product information is subject to change without notice. – May 28, 2014 apm1010 BT4.0 Single Mode Module Preliminary Data Sheet 1.3 Pinout m co m m co nf id en tia l 1.3.1 Pin Assignment (Top View) ap 1.3.2 Pin Description * I/O: Digital Input/Output, I: Digital Input, O: Digital Output, A: Analog, PU: Pull-up, PD: Pull-down # Name I/O Internal Resistor Description 1 GND GND - Ground 2 VDD_BAT Power - 3.3V power input Page 5 of 13 apm Communication, Inc. – TEL: 886-3-666-1188 – FAX: 886-3-666-8033 Website: http://www.apmcomm.com – E-mail: [email protected] apmcomm Proprietary and Confidential – Product information is subject to change without notice. – May 28, 2014 apm1010 BT4.0 Single Mode Module Preliminary Data Sheet # Name I/O Internal Resistor Description GND GND - Ground 4 GND GND - Ground 5 GND GND - Ground 6 GND GND - Ground 7 RFOUT A - RF I/O 8 GND GND - Ground 9 GND GND - Ground 10 GND GND - Ground 11 AIO2 I/O - Analogue programmable I/O line. 12 AIO1 I/O - Analogue programmable I/O line. 13 AIO0 I/O - 14 PIO0/UART_TX O PU Programmable I/O line or UART data output active high 15 PIO1/UART_RX I PD Programmable I/O line or UART data input active high 16 PIO3/SF_DIN I/O - Programmable I/O line 17 PIO4 SF_CS# I/O - Programmable I/O line 18 PIO5/SPI_CLK I/O - Programmable I/O line or debug SPI CLK 19 PIO6/SPI_CSB I/O - Programmable I/O line or debug SPI CSB 20 PIO7/SPI_MOSI I/O - Programmable I/O line or debug SPI MOSI I/O - Programmable I/O line or debug SPI MISO Power - 3.3V power input I/O - Programmable I/O line I/O - Programmable I/O line I/O - Programmable I/O line 26 SPIPION I - Normal pull low, Active High(Selects SPI debug on PIO[5:8]) 27 SCL O - I²C clock 28 SDA I/O - I²C data I/O 29 GND GND - Ground I - Input to wake apm1010 from hibernate or dormant. 31 GND GND - Ground 32 GND GND - Ground 22 VDD_PADS 23 PIO9 co 24 PIO10 ap m 25 PIO11 30 WAKE en co nf id m m 21 PIO8/SPI_MISO tia l 3 Analogue programmable I/O line. Page 6 of 13 apm Communication, Inc. – TEL: 886-3-666-1188 – FAX: 886-3-666-8033 Website: http://www.apmcomm.com – E-mail: [email protected] apmcomm Proprietary and Confidential – Product information is subject to change without notice. – May 28, 2014 apm1010 BT4.0 Single Mode Module Preliminary Data Sheet Absolute Maximum Rating Symbol Description Min. Max. Units Storage temperature -40 +85 °C VDD_BAT Battery input +3.1 +3.6 V VDD_PAD I/O Supply voltage -3.1 +3.6 V TST tia l 2 *Absolute maximum ratings indicate limits beyond which damage to the device may occur. Recommended Operating Condition Symbol Description Min. en 2.1 Typ. Max. Units +25 +70 °C -20 VDD_BAT Battery input +3.1 +3.3 +3.6 V VDD_PAD I/O Supply voltage +3.1 +3.3 +3.6 V ap m co m m co nf id Operating temperature TOP Page 7 of 13 apm Communication, Inc. – TEL: 886-3-666-1188 – FAX: 886-3-666-8033 Website: http://www.apmcomm.com – E-mail: [email protected] apmcomm Proprietary and Confidential – Product information is subject to change without notice. – May 28, 2014 apm1010 BT4.0 Single Mode Module Preliminary Data Sheet 3 RF Specification 3.1 Condition: VDD_BAT=VDD_PAD=+3.3V, TOP=+25°C Parameter tia l 3.1.1 Channel 0 (2402MHz) Bluetooth Spec. Min Typ Max 4 5.5 7 Modulation index: ∆f1avg 225 253.5 275 Modulation index: ∆f2 avg 185 225.8 - > 185 kHz Modulation index: ∆f2avg / ∆f1avg 0.8 0.89 - > 0.8 NA -40 1.7 +40 + 40 kHz -20 -7 +20 + 20 kHz/50us - -5 50 <50 kHz - -92 -70 <-70 dBm Receiver sensitivity - Frame Error Rate - 0 30.8 <30.8 % PER Report Integrity - Frame Error Rate 50 50 65.4 Min Typ Max Maximum RF transmit power *(a) 4.5 6 7.5 Modulation Characteristic 225 259 275 Modulation Characteristic Initial carrier frequency tolerance Carrier frequency drift rate Carrier frequency drift: Max Drift Low Energy – Receiver Test < 275 50.0 < PER < 65.4 dBm kHz % co m m Receiver sensitivity 225 < ∆f1avg co nf id Maximum RF transmit power *(a) en Low Energy - Transmitter Test Unit Parameter ap m 3.1.2 Channel 18 (2442MHz) Bluetooth Spec. Unit Low Energy - Transmitter Test Modulation index: ∆f1avg dBm 225 < ∆f1avg < 275 kHz Page 8 of 13 apm Communication, Inc. – TEL: 886-3-666-1188 – FAX: 886-3-666-8033 Website: http://www.apmcomm.com – E-mail: [email protected] apmcomm Proprietary and Confidential – Product information is subject to change without notice. – May 28, 2014 apm1010 BT4.0 Single Mode Module Preliminary Data Sheet Typ Max Bluetooth Spec. Unit Modulation index: ∆f2 avg 185 227 - > 185 kHz Modulation index: ∆f2avg / ∆f1avg 0.8 0.87 - > 0.8 NA Initial carrier frequency tolerance -40 1.7 +40 + 40 kHz Carrier frequency drift rate -20 -8 +20 + 20 kHz/50us - 0 50 <50 kHz Receiver sensitivity - -92 - <-70 dBm Receiver sensitivity - Frame Error Rate - 0 - <30.8 % Carrier frequency drift: Max Drift tia l Min Parameter en Low Energy – Receiver Test 50.0 < PER < co nf id PER Report Integrity - Frame Error Rate 50 65.4 % 3.1.3 Channel 39 (2480MHz) Bluetooth Spec. Min Typ Max 4.5 6 7.5 Modulation index: ∆f1avg 225 256 275 Modulation index: ∆f2 avg 185 226 - > 185 kHz Modulation index: ∆f2avg / ∆f1avg 0.8 0.88 - > 0.8 NA -40 1.7 +40 + 40 kHz -20 -10 20 + 20 kHz/50us - -6 50 <50 kHz - -92 - <-70 dBm m m Parameter Unit Low Energy - Transmitter Test co Maximum RF transmit power *(a) m Modulation Characteristic ap Initial carrier frequency tolerance Carrier frequency drift rate Carrier frequency drift: Max Drift dBm 225 < ∆f1avg < 275 kHz Low Energy – Receiver Test Receiver sensitivity Page 9 of 13 apm Communication, Inc. – TEL: 886-3-666-1188 – FAX: 886-3-666-8033 Website: http://www.apmcomm.com – E-mail: [email protected] apmcomm Proprietary and Confidential – Product information is subject to change without notice. – May 28, 2014 apm1010 BT4.0 Single Mode Module Preliminary Data Sheet Receiver sensitivity - Frame Error Rate PER Report Integrity - Frame Error Rate Typ Max Bluetooth Spec. Unit - 0 - <30.8 % 50.0 < PER < 50 65.4 % en Bluetooth Current consumption Mode Current Consumption (uA) Fast advert 60ms 412 co nf id 3.2 Min tia l Parameter 24 Connected 10 16 100 14.6 Deep sleep 5 ap m co m m Slow advert 1.2s Page 10 of 13 apm Communication, Inc. – TEL: 886-3-666-1188 – FAX: 886-3-666-8033 Website: http://www.apmcomm.com – E-mail: [email protected] apmcomm Proprietary and Confidential – Product information is subject to change without notice. – May 28, 2014 apm1010 BT4.0 Single Mode Module Preliminary Data Sheet Mechanical Specification Dimension 15×15×2.45 mm Weight 0.6259 gram Pinout 32 Antenna External antenna support (Pin7) Package Outline ap m co m m co nf id en 4.1 tia l 4 Page 11 of 13 apm Communication, Inc. – TEL: 886-3-666-1188 – FAX: 886-3-666-8033 Website: http://www.apmcomm.com – E-mail: [email protected] apmcomm Proprietary and Confidential – Product information is subject to change without notice. – May 28, 2014 apm1010 BT4.0 Single Mode Module Preliminary Data Sheet 5 Assembly Guideline Recommended Mounting Pad Design (Top View) ap m co m m co nf id en tia l 5.1 Unit: mm PCB METAL LAND (TOP VIEW) Page 12 of 13 apm Communication, Inc. – TEL: 886-3-666-1188 – FAX: 886-3-666-8033 Website: http://www.apmcomm.com – E-mail: [email protected] apmcomm Proprietary and Confidential – Product information is subject to change without notice. – May 28, 2014 apm1010 BT4.0 Single Mode Module Preliminary Data Sheet 5.2 Baking condition recommendation before IR reflow Baking condition for apm1010 module: I: 125°C /4 hrs baking is necessary for apm1010 module before SMT process. After baking treatment the modules tia l can be stored in the environment under 30°C and 60% RH for 48 hrs. If the storage time is over 48 hrs, the modules need to be re-baked using the same condition again. II: In the event that the sealed bag is damaged on receipt of the modules, the baking condition should be changed to 5.3 en 125°C /8 hrs. Recommended Temperature Reflow Profile co nf id The solder profile depends on various parameters necessitating a set up for each application. The data here is given only for guidance on solder re-flow. Maximum reflow temperature is 250°C 125°C to 180°C 1 to 3°C / sec. 250°C, Max. Preheat ramp-up rate Peak temperature Temperature maintained above 217°C 30 ~ 90 sec. Cooling ramp-down rate <2°C / sec. ≤3 ap m co m m Maximum number of reflow cycles Typical Lead-Free Re-flow Solder Profile Heating/Cooling Speed Pre-Heating Heating ΔT1 ΔT2 ΔT3 Tp1−Tp2 tpre TMax tP3 1 to 3°C / sec 1 to 3°C / sec < 2°C / sec 125 ~ 180°C 30 ~ 90 sec. 250°C max. 30 ~ 90 sec. Page 13 of 13 apm Communication, Inc. – TEL: 886-3-666-1188 – FAX: 886-3-666-8033 Website: http://www.apmcomm.com – E-mail: [email protected] apmcomm Proprietary and Confidential – Product information is subject to change without notice. – May 28, 2014