SMA Male to SMA Male Cable Using PE

SMA Male to SMA Male Cable Using PE-141FLEX Coax, RoHS
RF Cable Assemblies - PE3CA1035
Configuration
• Connector 1: SMA Male
• Connector 2: SMA Male
• Cable Type: PE-141FLEX
Features
• Design operates to 26 GHz
• Shielding effectivity > 90dB
• One time minimum bend radius: 0.4 inch
Applications
• High Performance RF equipment
interconnect
• Flexible in cabinet or in the rack
requirements
• Inside the box RF routing
• General purpose lighter duty lab
use
.
Description
These new high performance flexible cables are made using our PE-141FLEX coax and our new low profile connectors. The
high performance flexible design is well suited for connecting RF devices in rack-mount systems, inside RF equipment and for
general lab hookup where a more expensive test cable is not required. These cables are similar to the PE30X series which
have retractable coupling nuts and thick wall SMA connectors. The heavier duty PE35X test series cables have similar performance, but include a heavy duty strain relief mechanism and extra booting material as well as a thick wall SMA connector
to increase the ruggedness of the PE35X cables for use in more demanding test environments.
PE-141FLEX is a flexible cable alternate to Semi Rigid coax and has a solid PTFE resulting in a 69.5% phase velocity. The
smooth wall formed by the Braid over Spiral Ribbon design allows for a flexible cable that has similar performance to a solid
wall 141 Semi Rigid (RG402) cable.
Electrical Specifications
Description
Frequency Range
Minimum
Typical
DC
Maximum
Units
26.5
GHz
VSWR1.4:1
Return Loss
15.56
Velocity of Propagation
RF Shielding
dB
69.5 %
90 dB
Group Delay
1.44 [4.72]
ns/ft [ns/m]
Capacitance
29.4 [96.46]
pF/ft [pF/m]
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SMA Male to SMA Male Cable Using PE-141FLEX Coax, RoHS PE3CA1035
PE3CA1035 REV 1.0
1
SMA Male to SMA Male Cable Using PE-141FLEX Coax, RoHS
RF Cable Assemblies - PE3CA1035
Operating Voltage (AC)
250
Vrms
. Specifications by Frequency
Description
Frequency
F1
F2
3
6
F4
F5
12 180.0265
0.85
1.08
1.3
Units
GHz
Insertion Loss
0.38
[1.25] [1.8] [2.79][3.54][4.27]
VSWR
1.08:1
1.12:11.2:11.3:11.4:1
Power Handling
0.55
F3
215150105 88 75
dB/ft
[dB/m]
Watts
. Mechanical Specifications
Cable Assembly
.
Connection Type
One Time Minimum Bend Radius
Repeated Minimum Bend Radius
In-Series
0.4 in [10.16 mm]
1.58 in [40.13 mm]
Cable
Cable Type
Impedance
Inner Conductor Type
Inner Conductor Material and Plating
Dielectric Type
Number of Shields
Shield Layer 1
Shield Layer 2
Outer Conductor 1 Material and Plating
Outer Conductor 2 Material and Plating
Jacket Material
Jacket Diameter
PE-141FLEX
50 Ohms
Solid
Copper Clad Steel, Silver
PTFE
2
Silver Plated Copper Tape
Silver Plated Copper Braid
Silver Plated Copper Tape
Silver Plated Copper Braid
FEP
0.163 in [4.14 mm]
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SMA Male to SMA Male Cable Using PE-141FLEX Coax, RoHS PE3CA1035
PE3CA1035 REV 1.0
2
SMA Male to SMA Male Cable Using PE-141FLEX Coax, RoHS
RF Cable Assemblies - PE3CA1035
Connectors
Description
Connector 1
Connector 2
Type
SMA Male
SMA Male
Impedance
50 Ohms
50 Ohms
Connection Method
Standard
Standard
500
500
Brass, Gold
Brass, Gold
Mating Cycles
Contact Material and Plating
Dielectric Type
Coupling Nut Material and Plating
Hex Size
Body Material and Plating
PTFE
PTFE
Passivated Stainless Steel
Passivated Stainless Steel
5/16 Inch
5/16 Inch
Stainless Steel, Gold
Stainless Steel, Gold
Seal Gasket Material
Silicon
.
Environmental Specifications
Temperature
Operating Range
-40 to +150 deg C
Compliance Certifications (visit www.Pasternack.com for current document)
RoHS Compliant
Yes
Plotted and Other Data
Notes:
• Values at 25°C, sea level.
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SMA Male to SMA Male Cable Using PE-141FLEX Coax, RoHS PE3CA1035
PE3CA1035 REV 1.0
3
SMA Male to SMA Male Cable Using PE-141FLEX Coax, RoHS
RF Cable Assemblies - PE3CA1035
Typical Performance Data
PE3CA1035-24 VSWR
1.5
Maximum
1.4
Typical
1.3
VSWR, dB
1.2
1.1
1
-
1.50
3.00
4.50
6.00
7.50
9.00
10.50
12.00
13.50
15.00
16.50
18.00
19.50
21.00
22.50
24.00
25.50
27.00
Frequency (GHz)
PE3CA1035-24 Insertion Loss (dB)
1
Maximum
0
Typical
dB -1
-2
-3
-
2.00
4.00
6.00
8.00
10.00
12.00
14.00
16.00
18.00
20.00
22.00
24.00
26.00
Frequency (GHz)
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SMA Male to SMA Male Cable Using PE-141FLEX Coax, RoHS PE3CA1035
PE3CA1035 REV 1.0
4
SMA Male to SMA Male Cable Using PE-141FLEX Coax, RoHS
RF Cable Assemblies - PE3CA1035
How to Order
Part Number Configuration:
PE3CA1035
|
|
|
|
|
Example: - xx
|
|
|
uu
|
Unit of Measure:
cm = Centimeters
<blank> = Inches
Length
Base Number
PE3CA1035-12 = 12 inches long cable
PE3CA1035-100cm = 100 cm long cable
SMA Male to SMA Male Cable Using PE-141FLEX Coax, RoHS from Pasternack Enterprises has same day shipment for
domestic and International orders. Our RF, microwave and millimeter wave products maintain a 99% availability and are part
of the broadest selection in the industry.
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price,
inventory and certifications: SMA Male to SMA Male Cable Using PE-141FLEX Coax, RoHS PE3CA1035
URL: http://www.pasternack.com/sma-male-sma-male-pe-141flex-cable-assembly-pe3ca1035-p.aspx
PE3CA1035 REV 1.0
5
PE3CA1035 CAD Drawing
SMA Male to SMA Male Cable Using PE-141FLEX Coax, RoHS
PE3CA1035 REV 1.0
6