SMC Jack Bulkhead Connector Clamp/Solder Attachment For RG178, RG196, .177 inch D Hole TECHNICAL DATA SHEET PE4279 SMC Jack Bulkhead Connector Clamp/Solder Attachment For RG178, RG196, .177 inch D Hole Configuration Connector Connector Specification Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style Mount Method SMC Jack MIL-C-39012 RG178,RG196 Clamp/Solder Straight Bulkhead Electrical Specifications Impedance, Ohms 50 Mechanical Specifications Temperature Operating Range, deg C -65 to +165 Size Length, in [mm] Width/Dia., in [mm] 0.765 [19.43] 0.219 [5.56] Weight, lbs [g] 0.006 [2.72] Connector Type Contact Material and Plating Contact Plating Specification Body Material and Plating Dielectric Type SMC Jack Gold MIL-G-45204 Brass, Nickel Teflon . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMC Jack Bulkhead Connector Clamp/Solder Attachment For RG178, RG196, .177 inch D Hole PE4279 PE4279 REV 1 SMC Jack Bulkhead Connector Clamp/Solder Attachment For RG178, RG196, .177 inch D Hole TECHNICAL DATA SHEET PE4279 Plotted and Other Data Notes: Values at 25 °C, sea level SMC Jack Bulkhead Connector Clamp/Solder Attachment For RG178, RG196, .177 inch D Hole from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: SMC Jack Bulkhead Connector Clamp/Solder Attachment For RG178, RG196, .177 inch D Hole PE4279 URL: http://www.pasternack.com/smc-jack-standard-rg178-rg196-connector-pe4279-p.aspx PE4279 REV 2 © 2013 Pasternack Enterprises All Rights Reserved PE4279 REV 3. SOLDER CONTACT (5) TO CENTER CONDUCTOR. INSERT CABLE ASSEMBLY INTO BODY & TIGHTEN. 2. SLIDE BRAID CLAMP (3) OVER DIELECTRIC & UNDER BRAID. PUSH INTO WASHER UNTIL IT STOPS. STRIP CABLE AS SHOWN IN B. TRIM EXCESS BRAID FLUSH WITH SURFACE OF COMPRESSION WASHER (2). INSERT INSULATOR (4) OVER CENTER CONDUCTOR & DIELECTRIC. 1. SLIDE CLAMP NUT (1) OVER CABLE AS SHOWN IN A. SLIDE COMPRESSION WASHER (2) OVER BRAID & SEAT AGAINST JACKET. FLAIR BRAID OVER COMPRESSION WASHER (2). ASSEMBLY PROCEDURES REV. - CAD FILE 020603 SCALE N/A SIZE A 2233 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. FSCM NO. 53919 PE4279 DWG TITLE SMC Jack Bulkhead Connector Clamp/Solder Attachment For RG178, RG196, .177 inch D Hole PE4279 CAD Drawing 3