Technical Data Sheet Pb Free Specification THBFR411 SSC Drawn Approval Customer Approval Rev. 02 January 2012 WWW.SEOULSEMICON.COM 서식번호 : SSC- QP- 7- 07- 25 (Rev.0.0) Technical Data Sheet [ Contents ] 1. Description 2. Absolute maximum ratings 3. Electro-Optical characteristics 4. Characteristic diagrams 5. Reliability result 6. Rank 7. Outline Dimension 8. Material 9. Reel Structure 10. Packing 11. Soldering profile 12. Precaution for Use Rev. 02 January 2012 WWW.SEOULSEMICON.COM 서식번호 : SSC- QP- 7- 07- 25 (Rev.0.0) Technical Data Sheet THBFR411 - 1. Description Features Small size suitable for compact • 1.6 X 1.5 X 0.5 mm • Untited, Diffused flat mold • Wavelength : appliances. - THBFR411 Surface-mounted chip LED device. -. Blue : 465 nm - Pb-free and RoHS complaint component. - High brightness, High efficiency - Tape and Reel packing. - Increases the life time of battery. -. Red : 625 nm Applications Cellular phone’s keypad lightning Information Boards Rev. 02 January 2012 WWW.SEOULSEMICON.COM 서식번호 : SSC- QP- 7- 07- 25 (Rev.0.0) Technical Data Sheet ℃ 2. Absolute maximum ratings (Ta=25 ) Value Parameter Symbol Unit Blue Red Power Dissipation Pd 74 66 mW Forward Current IF 20 30 mA Peak Forward Current IFM *1 50 100 mA Operating Temperature Topr. -40 ~ 85 Storage Temperature Tstg. -40 ~ 100 ℃ ℃ ≤ 1msec and Duty ratio≤1/10. *1 IFM conditions: Pulse width Tw ℃ 3. Electro-Optical Characteristics Parameter Symbol Forward Voltage VF Reverse Voltage (Ta=25 ) Condition Color Min Typ Max Blue 2.9 3.2 3.7 Red 1.8 2.0 2.2 VR ㎃ I =5 ㎃ Blue 0.6 0.8 1.5 Reverse Current IR VR=5V Red - - 10 Luminous Intensity*2 IV IF=20 ㎃ Blue 60 110 160 Red 60 90 150 Wavelength λ IF=20 ㎃ Blue 460 465 470 D Red 615 625 635 Spectral Bandwidth Δλ IF=20 ㎃ Blue - 20 - Red - 15 - θ IF=20 ㎃ Blue - 120 - Red - 120 - Viewing Angle*3 2 IF=20 F 1/2 Unit V ㎂ mcd nm nm ˚ *2 The luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. *3 1/2 is the off-axis where the luminous intensity is 1/2 the peak intensity. θ [Note] Tolerance : Iv ± 10%, λ D ± 2nm, , VF ± 0.1V Rev. 02 January 2012 WWW.SEOULSEMICON.COM 서식번호 : SSC- QP- 7- 07- 25 (Rev.0.0) Ta = 25o Forward Current vs. Forward Voltage Relative Luminous Intensity vs. Forward Current 100 140 Red 120 Relative Intensity IV(%) Red 10 Blue 1 100 80 Blue 60 40 20 0 0.1 1.8 2.2 2.6 3.0 3.4 0 Forward Voltage VF(V) 5 10 15 20 25 30 Forward Current IF(mA) Forward Current vs. Ambient Temperature (per die) Spectrum 40 1.0 Red 0.8 Intensity[a.u.] 30 Forward current IF(mA) Forward Current IF(mA) Technical Data Sheet 4. Characteristic Diagrams 20 Blue 10 0 0.6 0.4 0.2 -25 0 25 50 75 o Ambient temperature Ta( C) 100 0.0 300 400 500 600 700 800 Wavelength [nm] Rev. 02 January 2012 WWW.SEOULSEMICON.COM 서식번호 : SSC- QP- 7- 07- 25 (Rev.0.0) Technical Data Sheet Radiation Diagram Ta = 25o 90 120 150 180 60 30 0 Rev. 02 January 2012 WWW.SEOULSEMICON.COM 서식번호 : SSC- QP- 7- 07- 25 (Rev.0.0) Technical Data Sheet 5. Reliability Test Item Duration / Cycle Number Of Damaged ℃ 500 hrs 0/22 ℃ 500 hrs 0/22 500 hrs 0/22 100 cycle 0/22 1 time 0/22 Test Conditions Operating at Room temperature 20mA, @25 Operating at High temperature 20mA, @85 Operating at High temperature / High humidity ℃ 20mA, @60 ,90% ℃ Shift (2hr/cycle) Thermal shock test Thermal resistance Test -40~85 ℃ 85 , 85% 24hrs Reflow 3 times (Max 260 10sec) Thermal shock 30 cycle ℃ ℃ MSL : 2a (30 , 60% : 4 weeks) *Criterion OK Iv > Initial value * 0.5 VF Initial value ± 0.1V Rev. 02 January 2012 WWW.SEOULSEMICON.COM 서식번호 : SSC- QP- 7- 07- 25 (Rev.0.0) Technical Data Sheet 6. Rank IF = 20mA RANK IV[mcd] Blue A 60~110 B 110~160 C 60~110 D 110~160 E 60~110 F 110~160 G 60~110 H 110~160 I 60~110 J 110~160 K 60~110 L 110~160 M 60~110 N 110~160 O 60~110 P 110~160 VF[V] Red Blue Wd[nm] Red Blue Red 460~465 2.9~3.1 465~470 460~465 3.1~3.3 465~470 60~150 1.8~2.2 615~635 460~465 3.3~3.5 465~470 460~465 3.5~3.7 465~470 Rev. 02 January 2012 WWW.SEOULSEMICON.COM 서식번호 : SSC- QP- 7- 07- 25 (Rev.0.0) Tolerance ± 0.1, Unit : 4 ㎜ 0.2 Resin 0.6 1.2 1.1 2 (0.18) Marking 0.4 1.5 1.6 PCB 1 3 0.2 0.5 0.6 0.4 0.8 Cathode 4 Blue 1 Red 2.4 2 0.8 Technical Data Sheet 7. Outline Dimension 3 0.2 Anode 1.8 [ Recommended Solder Pattern] 8. Material Item Substrate Chip (B/R) wire Encapsulate Electrode Material BT-Resin PCB InGaN/AlInGaP Gold Epoxy Au Plated Rev. 02 January 2012 WWW.SEOULSEMICON.COM 서식번호 : SSC- QP- 7- 07- 25 (Rev.0.0) ± 0.1 ± 0.05 ± 0.05 (2.75) 3.5 0.2 ± 0.2 ± 0.05 8.0 2.0 1.5 - 0 1.75 +0.1 ± 0.1 ± 0.05 4.0 1.75 4.0 ± 0.05 ± 0.1 0.5 180 1.73 ± 0.05 0.7 ± 0.05 11.4 +0 -3 9 ± 0.2 +0.2 -0 2 ± 0.3 60 Technical Data Sheet 9. Reel Structure 22 13 ± 0.2 Label (1) Quantity : 4000pcs/Reel (2) Cumulative Tolerance : Cumulative Tolerance/10 pitches to be ± 0.2mm (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10 angle to be the carrier tape (4) Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package ℃ Rev. 02 January 2012 WWW.SEOULSEMICON.COM 서식번호 : SSC- QP- 7- 07- 25 (Rev.0.0) Technical Data Sheet 10. Packing Reel RANK: XXX QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX PART NUMBER : XXXXXX SEOUL SEMICONDUCTOR CO., LTD. HUMIDITY INDICATOR #### Aluminum Vinyl Bag ### DESI PAK ### ### ####### RANK: XXX QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX PART NUMBER : XXXXXX SEOUL SEMICONDUCTOR CO., LTD. Outer Box Structure 1 SIDE RANK: QUANTITY : XXXX c LOT NUMBER : XXXXXXXXXX PART NUMBER : 1 XXXXXX 2 SEOUL SEMICONDUCTOR CO., LTD. 2 SIDE RoHS b a LOT NUMBER Rank QTY Material : Paper(SW3B(B)) SIZE (mm) TYPE a c b 7inch 245 220 142 SEOUL SEMICONDUCTOR CO., LTD. Rev. 02 January 2012 WWW.SEOULSEMICON.COM 서식번호 : SSC- QP- 7- 07- 25 (Rev.0.0) Technical Data Sheet 11. Soldering profile (1) Lead Solder Lead Solder Lead Solder ℃ Pre-heat 120~150 Pre-heat time 120 sec. Max. ℃ Max. Peak-Temperature 240 Soldering time Condition 10 sec. Max. 2.5~5 o C / sec. 2.5~5 C / sec. Pre-heating 120~150 oC 240 oC Max. 10 sec. Max. 60sec. Max. Above 200 oC 120sec. Max. (2) Lead-Free Solder Lead Free Solder Lead-frame Solder ℃ Pre-heat 150~200 Pre-heat time 120 sec. Max. ℃ Max. Peak-Temperature 260 Soldering time Condition 10 sec. Max. 1~5 o C / sec. 1~5 o C / sec. Pre-heating 150~200 o C 260 oC Max. 10 sec. Max. 60sec. Max. Above 220 oC 120sec. Max. (3) Hand Soldering conditions Do not exceed 3 seconds at maximum 280ºC under soldering iron. Note : In case that the soldered products are reused in soldering process, we don’t guarantee the products. Rev. 02 January 2012 WWW.SEOULSEMICON.COM 서식번호 : SSC- QP- 7- 07- 25 (Rev.0.0) Technical Data Sheet 12. Precaution for Use (1) Storage LEDs must be stored at clean atmosphere. If the LEDs are stored for 3 months or more after shipment from SSC, storage in a sealed container with a nitrogen atmosphere is recommended. To avoid absorption of moisture, it is recommended to store in a dry box (or a desiccator) with a desiccant. * Shelf Life : 12 months at < 40ºC and 90%RH (2) Attention after open. LED is correspond to SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. After opened and mounted the soldering shall be quickly. * Within 672 hours at factory conditions of equal to or less than 30ºC/60%RH, or Stored at < 10% RH (3) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (4) In the case of change color of indicator on desiccant, components shall be dried 10-12hr at 60± 5ºC. (5) When the LED is operating, the driving current should be determined after considering the maximum ambient temperature requirements. (6) When using multiple LEDs, It is recommended to connect a resistor on each LED. Otherwise, LEDs may vary due to variation in forward voltage of the LEDs. (7) The driving circuit must be designed to allow forward voltage only when it is ON or OFF. If the reverse voltage is applied to LED, migration can be generated resulting in LED damage (8) Any mechanical force or excessive vibration should be avoided during temperature cooling process to normal temperature after reflow. (9) Rapid cooling shall be avoided. (10) LED should not be placed on a flexible area on the PCB. (11) This device should not be used in any type of fluid such as water, oil, organic solvent etc. When washing is required, IPA should be used. (12) Anti radioactive ray design is not considered for the products. (13) Damage prevention from ESD or Surge. It is highly recommended to use the wrist-band or anti electrostatic gloves when handling the LED’s All devices, equipments and machines mush be properly grounded (14) The appearance and specifications of the product may be modified for improvement without notice. Rev. 02 January 2012 WWW.SEOULSEMICON.COM 서식번호 : SSC- QP- 7- 07- 25 (Rev.0.0)