SEOUL LUYT801-S

Z-Power LED
X10490
Technical
Data
Sheet
Specification
LUYT801-S
SSC
Drawn
Approval
Customer
Approval
Rev. 00
September. 2010
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
LUYT801-S
1. Features
2.
Absolute Maximum Ratings
3. Electro-Optical Characteristics
4. Characteristic Graph
5.
Reliability Test Item and Condition
6. Color & Binning
7. Outline Dimension
8. Packing
9. Soldering
10. Precaution for use
11. Handling of Silicone Resin LEDs
Rev. 00
September. 2010
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
LUYT801-S
Description
This surface-mount LED
comes in PLCC standard
package dimension. It has a
substrate made up of a molded
plastic reflector sitting on top
of a bent lead frame. The die is
attached within the reflector
cavity and the cavity is
encapsulated by epoxy or
silicone
The package design coupled
with careful selection of
component materials allow
these products to perform with
high reliability in a larger
temperature range -40℃ to
100℃. The high reliability
feature is crucial to Automotive
interior and Indoor ESS.
LUYT801-S
Features
사진
• Industry Standard
PLCC SMT package
• High brightness
using AlInGaP and
InGaN dice
technologies
• Available in multiple
colors
• High volume, high
reliability
Applications
• Interior automotive
• Electronic Signs and
Signals
• Office Automation,
Electrical Appliances,
Industrial Equipment
Rev. 00
September. 2010
www.Acriche.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
1. Features
• Yellow colored SMT package
• Material AlInGaP
• Suitable for all SMT assembly methods
Suitable for all soldering methods
• RoHS Compliant
Rev. 00
September. 2010
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
2. Absolute maximum ratings
Parameter
Symbol
Value
Unit
Power Dissipation
Pd
75
mW
Forward Current
IF
30
mA
100
mA
Peak Forward Current
IFM
*2
Reverse Voltage
VR
5
V
Operating Temperature
Topr
-40 ~ +100
oC
Storage Temperature
Tstg
-40 ~ +100
oC
*1. Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product.
*2. IFM was measured at Tw≤1 msec of pulse width and D≤1/10 of duty ratio.
*3. LED’s properties might be different from suggested values like above and below tables if operation condition
will be exceeded our parameter range.
3. Electro-Optical characteristics
Parameter
Symbol
Condition
Min
Typ
Max
Unit
Forward Voltage
VF
IF =20mA
1.8
2.1
2.5
V
Reverse Current
IR
VR=5V
-
-
10
μA
Luminance Intensity *1
IV
IF =20mA
150
180
210
mcd
Peak Wavelength
λP
IF =20mA
-
593
-
nm
Dominant Wavelength
λd
IF =20mA
584
587
592
nm
Spectral Bandwidth 50%
Δλ
IF =20mA
-
15
-
nm
½
IF =20mA
-
120
-
deg.
Viewing Angle *2
2θ
*1. The luminous intensity IV was measured at the peak of the spatial pattern which may not be aligned with the mechanical
axis of the LED package. Luminous Intensity Measurement allowance is ±10%
*2. 2θ½ is the off-axis where the luminous intensity is 1/2 of the peak intensity.
*3. A tolerance of ±0.05V on forward voltage measurements.
Rev. 00
September. 2010
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Relative Luminous Intensity vs Forward Current
Forward Current vs. Forward Voltage
10
10
(Ta=25 OC )
2
(Ta=25 OC )
1 .4
Relative Luminous Intensity Iv/Iv [Rel]
10
Forward Current IF [mA]
Z-Power LED
X10490
Technical
Data
Sheet
4. Characteristic Graph
1
0
1 .2
1 .0
0 .8
0 .6
0 .4
0 .2
0 .0
1 .8 0
1 .8 5
1 .9 0
1 .9 5
2 .0 0
2 .0 5
0
5
10
15
20
25
30
Forward Current IF [mA]
Forward Voltage VF (V)
Forward Current Derating Curve
Radiation Diagram
(Ta=25 OC )
40
Forward Current IF [mA]
0
-30
30
20
-60
30
60
10
-90
90
0
-40
-20
0
20
40
60
80
100
120
Ambient Temperature TA [OC]
Rev. 00
September. 2010
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
5 Reliability
Item
Reference
Test Condition
Duration
/ Cycle
Number
of
Damage
Thermal Shock
EIAJ ED-4701
Ta =-40℃ (20min) ~ 100oC (20min)
(Transfer time : < 20sec)
100 Cycle
0/22
Temperature Cycle
EIAJ ED-4701
Ta =-40oC (30min) ~ 100oC (30min)
(Transfer time : 5min)
100 Cycle
0/22
High Temperature
Storage
EIAJ ED-4701
Ta =100oC
1000
Hours
0/22
High Temperature
High Humidity
Storage
EIAJ ED-4701
Ta =85oC, RH=85%
1000
Hours
0/22
Low Temperature
Storage
EIAJ ED-4701
Ta =-40oC
1000
Hours
0/22
Operating
Endurance Test
Internal
Reference
Ta =25oC, IF =30mA
1000
Hours
0/22
High Temperature
High Humidity Life
Test
Internal
Reference
Ta =85oC, RH=85%, IF =20mA
500 Hours
0/22
High Temperature
Life Test
Internal
Reference
Ta =100oC, IF =5mA
1000
Hours
0/22
Low Temperature
Life Test
Internal
Reference
Ta =-40oC, IF =20mA
1000
Hours
0/22
ESD(HBM)
MIL-STD883D
1KV at 1.5kΩ; 100pF
3 Time
0/22
Criteria for Judging the Damage
Item
Symbol
Forward Voltage
VF
Reverse Current
Luminous Intensity
Condition
Criteria for Judgement
MIN
MAX
IF =20mA
-
USL*1 × 1.2
IR
VR=5V
-
USL*1 × 2.0
IV
IF =20mA
LSL*2 × 0.5
-
Note : *1 USL : Upper Standard Level
*2 LSL : Lower Standard Level
Rev. 00
September. 2010
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
6. Color & Binning
● LUYT801-S BINNING
RANK
VF[V]
IV [mcd]
λd [nm]
A
1.8 ~ 2.5
90 ~ 120
584 ~ 586
B
1.8 ~ 2.5
90 ~ 120
586 ~ 588
C
1.8 ~ 2.5
90 ~ 120
588 ~ 590
D
1.8 ~ 2.5
120 ~ 150
584 ~ 586
E
1.8 ~ 2.5
120 ~ 150
586 ~ 588
F
1.8 ~ 2.5
120 ~ 150
588 ~ 590
G
1.8 ~ 2.5
150 ~ 180
584 ~ 586
H
1.8 ~ 2.5
150 ~ 180
586 ~ 588
I
1.8 ~ 2.5
150 ~ 180
588 ~ 590
J
1.8 ~ 2.5
180 ~ 210
584 ~ 586
K
1.8 ~ 2.5
180 ~ 210
586 ~ 588
L
1.8 ~ 2.5
180 ~ 210
588 ~ 590
Available rank
[Note] All measurements were made under the standardized environment of SSC.
Rev. 00
September. 2010
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Recommended Solder Pattern
1.9
2.8
0.15
1.8
0.8
2.2
1.6
0.8
Anode
1.8
3.2
2.4
1.6
Cathode
Cathode Mark
2.2
( Tolerance: ±0.2, Unit: mm )
8. packing
1 .5 5 ± 0 .0 5
4 .0 ±0 .1
1.75±0.1
2 .0 ±0 .0 5
0 .2 2 ±0 .0 5
3.83±0.1
5°
3.5±0.1
8±0.1
1 .0 ±0 .1
8°
3 .1 ±0 .1
2 .2 2 ±0 .1
11.4 ± 0.1
180 +0
-3
9.0 ± 0.3
LABLE
2.0 ± 0.2
13
30°
10
±0.2
60
Z-Power LED
X10490
Technical
Data
Sheet
7.outline dimension
22
(1) Quantity : 2000pcs/Reel
(2) Cumulative Tolerance : Cumulative Tolerance/10 pitches to be ±0.2mm
(3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from
the carrier tape at the angle of 10º to the carrier tape
(4) Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package
Rev. 00
September. 2010
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
● Reel Packing Structure
Reel
XXX
RANK:
QUANTITY : XXXX
LOT NUMBER : XXXXXXXXXX
XXXXXX
PART NUMBER :
SEOUL SEMICONDUCTOR CO., LTD.
HUMIDITY INDICATOR
DESI PAK
Aluminum Vinyl Bag
XXX
RANK:
QUANTITY : XXXX
LOT NUMBER : XXXXXXXXXX
PART NUMBER :
XXXXXX
SEOUL SEMICONDUCTOR CO., LTD.
Outer Box Structure
Material : Paper(SW3B(B))
SIZE (mm)
TYPE
a
c
b
7inch 245 220 142
1 SIDE
c
XXX
RANK:
1
QUANTITY : XXXX
LOT NUMBER : XXXXXXXXXX
TOP LED
RoHS
PART NUMBER :
XXXXXX
SEOUL SEMICONDUCTOR CO., LTD.
b
a
Rev. 00
September. 2010
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
9. soldering
(1) Lead Solder
Lead Solder
Lead Solder
2.5~5 o C / sec.
Pre-heat
120~150℃
Pre-heat time
120 sec. Max.
Peak-Temperature
240℃ Max.
Soldering time
Condition
10 sec. Max.
2.5~5 C / sec.
Pre-heating
120~150 oC
240 oC Max.
10 sec. Max.
60sec. Max.
Above 200 oC
120sec. Max.
(2) Lead-Free Solder
Lead-frame Solder
1~5 o C / sec.
Lead Free Solder
Pre-heat
150~200℃
Pre-heat time
120 sec.
Max.
Peak-Temperature
260℃ Max.
Soldering time
Condition
10 sec. Max.
1~5 o C / sec.
Pre-heating
150~200 o C
260 oC Max.
10 sec. Max.
60sec. Max.
Above 220 oC
120sec. Max.
(3) Hand Soldering conditions
Do not exceed 4 seconds at maximum 315ºC under soldering iron.
(4) The encapsulated material of the LEDs is silicone.
Precautions should be taken to avoid the strong pressure on the encapsulated part.
So when using the chip mounter, the picking up nozzle that does not affect the silicone
resign should be used.
(5) It is recommended that the customer use the nitrogen reflow method.
(6) Repairing should not be done after the LEDs have been soldered.
(7) Reflow soldering should not be done more than two times.
In the case of more than 24 hours passed soldering after first, LEDs will be damaged.
Note : In case that the soldered products are reused in soldering process, we don’t guarantee the products.
Rev. 00
September. 2010
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
10. precaution for use
(1) Storage
In order to avoid the absorption of moisture, it is recommended to store in a dry box (or a
desicator) with a desiccant. Otherwise, to store them in the following environment is
recommended.
Temperature : 5ºC ~30ºC Humidity : maximum 70%RH
(2) Attention after open.
LED is correspond to SMD, when LED be soldered dip, interfacial separation may affect
the light transmission efficiency, causing the light intensity to drop.
Attention in followed; Keeping of a fraction
Temperature : 5 ~ 40ºC Humidity : less than 10%
(3) In the case of more than 4 week passed after opening or change color of indicator
on desiccant, components shall be dried 10-12hr. at 60±5ºC.
(4) Silver plating might be tarnished in the environment that contains corrosive gases
and materials. Also any product that has tarnished lead might be decreased the
solder-ability and optical-electrical properties compare to normal ones.
Please do not expose the product in the corrosive environment during the storage.
(5) Any mechanical force or any excess vibration shall not be accepted to apply during
cooling process to normal temperature after soldering.
(6) Quick cooling shall be avoided.
(7) Components shall not be mounted on warped direction of PCB.
(8) Anti radioactive ray design is not considered for the products.
(9) This device should not be used in any type of fluid such as water, oil, organic
solvent etc. When washing is required, IPA should be used.
(10) When the LEDs are illuminating, operating current should be decided after considering
the ambient maximum temperature.
(11) The LEDs must be soldered within seven days after opening the moisture-proof packing.
(12) Repack unused products with anti-moisture packing, fold to close any opening and then
store in a dry place.
(13) The appearance and specifications of the product may be modified for improvement
without notice.
Rev. 00
September. 2010
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
11. Handling of Silicone Resin LEDs
(1) During processing, mechanical stress on the surface should be minimized as much as
possible. Sharp objects of all types should not be used to pierce the sealing compound.
(2) In general, LEDs should only be handled from the side. By the way, this also applies
to LEDs without a silicone sealant, since the surface can also become scratched.
(3) When populating boards in SMT production, there are basically no restrictions
regarding the form of the pick and place nozzle, except that mechanical pressure on the
surface of the resin must be prevented.
This is assured by choosing a pick and place nozzle which is larger than the LED’s
reflector area.
(4) Silicone differs from materials conventionally used for the manufacturing of LEDs.
These conditions must be considered during the handling of such devices. Compared to
standard encapsulants, silicone is generally softer, and the surface is more likely to
attract dust.
As mentioned previously, the increased sensitivity to dust requires special care
during processing. In cases where a minimal level of dirt and dust particles cannot be
guaranteed, a suitable cleaning solution must be applied to the surface after the
soldering of components.
(5) SSC suggests using isopropyl alcohol for cleaning. In case other solvents are used, it
must be assured that these solvents do not dissolve the package or resin.
Ultrasonic cleaning is not recommended. Ultrasonic cleaning may cause damage to the
LED.
Rev. 00
September. 2010
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)