Z-Power LED X10490 Technical Data Sheet Specification SFT825Z-S SSC Drawn Approval CUSTOMER Approval Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet CONTENTS 1. Feature & Application 2. Absolute Maximum Ratings 3. Electro Characteristics 4. Optical characteristics 5. Color & Binning 6. Rank of SFT825Z-S 7. Outline Dimension 8. Packing 9. Soldering 10. Precaution for use 11. Handling of Silicone Resin LEDs 12. Reliability Test Item and Condition Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet SFT825Z-S Description This surface-mount LED comes in PLCC standard package dimension. It has a substrate made up of a molded plastic reflector sitting on top of a bent lead frame. The die is attached within the reflector cavity and the cavity is encapsulated by epoxy or silicone. The package design coupled with careful selection of component materials allow these products to perform with high reliability in a larger temperature range -40℃ to 100℃. The high reliability feature is crucial to Automotive interior and Indoor ESS. SFT825Z-S Features • Pb-free Reflow Soldering application • RoHS Compliant • 6-Pin (R,G,B separate) type • White colored SMT package and diffused (milky color) • Suitable for all SMT assembly methods • ESD-withstand voltage : up to 6 kV (MIL-STD-883D) • Encapsulating Resin : hard silicone resin • High Reliability (silicone resin) Applications • Indoor and outdoor displays • LCD Backlights etc. • R G B – displays • Automotive • Signage and Channel letter • Indicator Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 2. Absolute maximum ratings (Ta=25ºC) Parameter Symbol Forward Current Unit Red Green Blue IF 30 30 30 mA *2 IFM 100 100 100 mA Reverse Voltage (per die) VR Forward Peak Surge Current 5 81*3 120*3 V 114*3 Power Dissipation Pd Operating Temperature Topr -40 ~ +100 ºC Storage Temperature Tstg -40 ~ +100 ºC - ±20,000V HBM (G, B) ±6,000V HBM (R) ESD Sensitivity *1 *2 *3 *4 *5 Value *5 263*4 mW Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product. IFM was measured at TW ≤ 1msec of pulse width and D ≤ 1/10 of duty ratio. The value for one LED device.(Single color) The value for total power dissipation when two and more devices are lit simultaneously. It is included the zener chip to protect the product from ESD Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 3. Electric & Optical characteristics Parameter Symbol Condition Min Typ Max IF =20mA 1.8 2.1 2.3 IF =20mA 3.0 3.2 3.8 IF =20mA 3.0 3.2 3.6 - - 1 - - 1 - - 1 - 700 1100 - 1200 1600 - 400 560 - 1.7 - - 2.8 - - 0.93 - IF =20mA - 632 - IF =20mA - 518 - Blue IF =20mA - 453 - Red IF =20mA 620 623 625 IF =20mA 520 527 535 Blue IF =20mA 455 460 465 Red IF =20mA - 14 - IF =20mA - 33 - IF =20mA - 23 - 2θ½ IF =20mA (per die) - 120 - IF =20mA (per chip) - 41 - ηop - 44 - - 15 - IF =20mA - 278 - IF =20mA - 277 - IF =20mA - 220 - Red Forward Voltage Green VF Blue Red Reverse Current Green IR Blue Red Luminance Intensity *1 Green IV Blue Red Luminance Flux Green ΦV Blue Red Peak Wavelength Dominant Wavelength Green Green Spectral Bandwidth Green λP λd ∆λ Blue Viewing Angle *3 R, G, B Red Optical Efficiency Green Blue Thermal Resistance (one chip on) (Ta=25ºC) Red Green Blue Rthja VR=10V (per die) IF =20mA (per chip) IF =20mA (per chip) Unit V µA mcd lm nm nm nm deg. lm/W K/W *1 The luminous intensity IV was measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. Luminous Intensity Measurement allowance is ±10% *2 Please refer to CIE 1931 chromaticity diagram *3 2 ½ is the off-axis where the luminous intensity is 1/2 of the peak intensity. [Note] All measurements were made under the standardized environment of SSC. Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00) Forward Current vs. Forward Voltage (per die) (Ta=25 OC ) 100 G re e n B lu e 50 Red 20 10 5 1 1 .6 2 .0 2 .4 2 .8 3 .2 3 .6 4 .0 4 .4 4 .8 F o rw a rd V o lta g e V F [V ] Relative Luminous Intensity vs Forward Current (Ta=25 OC ) 6 RED BLUE GREEN 5 Relative Luminosity (a.u.) Forward Current IFP [mA] Z-Power LED X10490 Technical Data Sheet 4. Optical characteristics 4 3 2 1 0 0 20 40 60 80 100 120 Forward Current IFP [mA] Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00) Ambient Temperature vs. Allowable Forward Current (per die) Red, Green, Blue 1 CHIP ON 30 Forward Current IF[mA] Z-Power LED X10490 Technical Data Sheet 4. Optical characteristics 3 CHIP ON 20 10 0 0 20 40 60 80 100 Ambient Tenperature[oC] Radiation Diagram (Ta=25 OC ) 0 -30 -60 -90 30 60 90 Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00) Spectrum (TA=25℃, IF=20mA/chip) 1.0 Relative Intensity [a.u.] Z-Power LED X10490 Technical Data Sheet 4. Optical characteristics RED GREEN BLUE 0.8 0.6 0.4 0.2 0.0 400 500 600 700 800 Wavelength [nm] Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 5. Color & Binning 0.9 0.8 0.7 0.6 y 0.5 0.4 Green 520 525 515 530 535 540 510 545 550 555 505 560 565 570 500 575 580 585 590 495 595 600 0.3 0.2 A B Red 610 620 630 830 490 485 Bluish White 0.1 475 2 Blue 470460 1 480 0.0 0.0 0.1 0.2 0.3 0.4 0.5 x 0.6 0.7 0.8 0.9 Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00) 0.30 g h 0.28 e f 0.26 y Z-Power LED X10490 Technical Data Sheet 5. Color & Binning c d 0.24 0.20 b a 0.22 0.22 0.24 0.26 0.28 0.30 x Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 6. Rank of SFT825Z-S [Note] All measurements were made under the standardized environment of SSC. In order to ensure availability, single color rank will not be orderable. Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 7.Outline Dimension Package Outlines 6 5 4 Package Marking (Cathode ) 1 2 3 ( Tolerance: ±0.2, Unit: mm ) Circuit Diagram Red Anode Blue Anode 6 5 Blue Cathode Recommended Solder Pad 4 ESD Protection Device 1 2 Green Red Cathode Anode 3 Green Cathode * MATERIALS PARTS MATERIALS Package Heat-Resistant Polymer Encapsulating Resin Hard Silicone Resin (Diffused) Electrodes Ag Plating Copper Alloy Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00) Package Marking MA X.5 2.0±0.05 3.7±0.1 1.7±0.1 4±0.1 2.9±0.1 MA X.5 11.4 ± 0.1 180 +0 -3 9.0 ± 0.3 LABLE 2.0 ± 0.2 13 ±0.2 30° 10 60 Z-Power LED X10490 Technical Data Sheet 8. Packing 22 ( Tolerance: ±0.2, Unit: mm ) (1)Quantity : 2000 pcs/Reel (2)Cumulative Tolerance : Cumulative Tolerance/10 pitches to be ±0.2mm (3)Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at the angle of 10º to the carrier tape (4)Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet ● Reel Packing Structure Reel QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX PART NUMBER : SEOUL SEMICONDUCTOR CO., LTD. HUMIDITY INDICATOR DESI PAK Aluminum Vinyl Bag QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX PART NUMBER : SEOUL SEMICONDUCTOR CO., LTD. Outer Box Structure Material : Paper(SW3B(B)) SIZE (mm) a c b 245 220 102 7inch 245 220 142 TYPE 1 SIDE c TUV QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX PART NUMBER : SEOUL SEMICONDUCTOR CO., LTD. MADE IN KOREA Acriche 1 Semiconductor EcoLight b RoHS a Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 9. Lot Number The lot number is composed of the following characters; SFT○□□◎◎ # ~ # SFT –First Part Name ○– Year (6 for 2006, 7 for 2007, 8 for 2008 ) □□ – Month ( 01 for Jan., 02 for Feb.,‥‥‥11 for Nov., 12 for Dec.) ◎◎ – Day ( 01, 02, 03, 04, ‥‥‥‥‥‥28, 29, 30, 31.) # ~# – The number of the internal quality control XXX QUANTITY : 2000 LOT NUMBER : SFT70426 01 512 PART NUMBER : SFT825Z-S SEOUL SEMICONDUCTOR CO., LTD. Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00) (1) Reflow Soldering Conditions / Profile (Lead Free Solder) Temp [°C] Tm : Reflow machine setting temp (max 30 sec.) Ts : Surface temp of PCB (max) Ts : Surface temp of PCB (recommend) Ts : Surface temp of PCB (min) 260 240 220 200 180 ~ Z-Power LED X10490 Technical Data Sheet 10. Soldering Pre-heating Rising 5 °C/sec Cooling -5 °C/sec 150 0 Time [Hr] (3) Hand Soldering conditions Do not exceed 4 seconds at maximum 315ºC under soldering iron. (4) The encapsulated material of the LEDs is silicone. Precautions should be taken to avoid the strong pressure on the encapsulated part. So when using the chip mounter, the picking up nozzle that does not affect the silicone resign should be used. Note : In case that the soldered products are reused in soldering process, we don’t guarantee the products. Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 11. Precaution for use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in a dry box (or a desiccator) with a desiccant. Otherwise, to store them in the following environment is recommended. Temperature : 5ºC ~30ºC Humidity : maximum 70%RH (2) Attention after open. LED is correspond to SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed; Keeping of a fraction Temperature : 5 ~ 40ºC Humidity : less than 10% (3) In the case of more than 1 week passed after opening or change color of indicator on desiccant, components shall be dried 10-12hr. at 60±5ºC. (4) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temperature after soldering. (5) Quick cooling shall be avoided. (6) Components shall not be mounted on warped direction of PCB. (7) Anti radioactive ray design is not considered for the products. (8) This device should not be used in any type of fluid such as water, oil, organic solvent etc. When washing is required, IPA should be used. (9) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (10) The LEDs must be soldered within seven days after opening the moistureproof packing. (11) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (12) The appearance and specifications of the product may be modified for improvement without notice. Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 12. Reliability Test Item and Condition Item Reference Test Condition Duration / Cycle Number of Damage Thermal Shock EIAJ ED4701 Ta =-40oC (30MIN) ~ 100oC (30MIN) 100 Cycle 0/22 Temperature Cycle EIAJ ED4701 Ta =-40oC (30MIN) ~ 25oC (5MIN) ~ 100oC (30MIN) ~ 25oC (5MIN) 100 Cycle 0/22 High Temperature Storage High Temperature High Humidity Storage Low Temperature Storage EIAJ ED4701 Ta =100oC 1000 Hours 0/22 EIAJ ED4701 Ta =85oC, RH=85% 1000 Hours 0/22 EIAJ ED4701 Ta =-40oC 1000 Hours 0/22 Operating Endurance Test Internal Reference Ta =25oC, IF =20mA 1000 Hours 0/22 Internal Reference Ta =85oC, RH=85%, IF =15mA 300 Hours 0/22 Internal Reference Ta =85oC, IF =20mA 500 Hours 0/22 Internal Reference Ta =-40oC, IF =20mA 1000 Hours 0/22 MIL-STD883D 1KV at 1.5kΩ; 100pF 3 Time 0/22 High Temperature High Humidity Life Test High Temperature Life Test Low Temperature Life Test ESD(HBM) Criteria for Judging the Damage Item Symbol Condition Forward Voltage VF Reverse Current Luminous Intensity Criteria for Judgement MIN MAX IF =20mA - USL*1 × 1.2 IR VR=5V - USL*1 × 2.0 IV IF =20mA LSL*2 × 0.5 - Note : *1 USL : Upper Standard Level *2 LSL : Lower Standard Level Rev. 07 April 2009 www.acriche .com www.acriche.com Document No. : SSC-QP-7-07-24 (Rev.00)