Active components Power-over-Ethernet Switches B PoE Switches Power over Ethernet (PoE) describes a process where power can be supplied to a network compatible device over the 8-wire Ethernet cable. In a narrower sense, PoE today means the IEEE 802.3af (DTE Power over MDI) standard which was adopted in June 2003. The main advantage of Power over Ethernet is that you do not require a separate power supply cable and so can install Ethernet devices in hard-to-reach places or in areas where there is not sufficient room for many cables. This means that you can save some significant installation costs, and that you can also integrate the power supply into a central uninterruptible power supply (UPS) to improve the reliability of the connected devices. B.24 PoE is used by network devices that need small amounts of power. It is typically used for IP telephones, network cameras, operating panels or wireless communications devices such as WLAN access points. Weidmüller PoE switches support the IEE 802.3at standard (also known as PoE+) and can therefore supply end devices with up to 30 W per PoE port. Weidmüller PoE switches also offer further advantages by their simple power supply needs. They do not require an additional 48 V supply in addition to the standard 24 V supply. 1381580000 – 2013 Power-over-Ethernet Switches – Basic Line 6-port IEEE 802.3af/at PoE+ unmanaged Ethernet Switch PPLQ PPLQ B PPLQ 3R( PPLQ Active components •4 IEEE 802.3af/at compliant PoE ports •Up to 30 watts per PoE port •24/48 V DC redundant wide-range power supply •Integrated DC/DC converter can supply 48 V-PoE devices across the entire input voltage range of 24 to 48 V DC •Intelligent power consumption detection and classification •Redundant dual V DC power inputs •Broadcast Storm Protection \% ,(6:%/3R(6HULHV Technical data Technology Standards Processing Type Flow Control Switch Properties MAC table size Packet buffer size Interface RJ45 Ports DIP Switches PoE pin assignment LED Indicators Power Requirements Input Voltage Input Current Overload Current Protection Connection Reverse Polarity Protection Physical Characteristics Housing Dimensions (W x H x D) Weight Installation Environmental Limits Operating Temperature Storage Temperature Ambient Relative Humidity Regulatory Approvals Safety EMI EMC 802.3af/at for Power-over-Ethernet IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3x for Flow Control Store and Forward IEEE 802.3x flow control, back pressure flow control 1K 512 KB 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode and auto MDI/MDI-X connection Enable/disable broadcast storm protection V-, V-, V+, V+ for pin 1, 2, 3, 6 (endspan, MDI-X alternative A) PWR1, PWR2, 10/100M, PoE Ordering Information Port Variants Type 2 * RJ45 10/100 BaseT(X), 4 * RJ45 IE-SW-BL06-2TX-4POE 10/100 BaseT(X) PoE+ IE-SW-BL06T-2TX-4POE Accessories 19“ Rack Mounting Kit Cable fixing kit Type RM-KIT IE-CFK-05 Operating Temperature 0 to 60 °C -40 to +75 °C Order No. 1241380000 1286920000 Order No. 1241440000 1339610000 24/48 (20 to 60 V) V DC, 2 redundant inputs Max 7.5 A @ 24 V DC (supports up to 4 ports at 30 watts per PoE port) Present 1 removable 4-contact terminal block Present Aluminium, IP 30 protection 50 × 115 × 70 mm (1.96 x 4.52 x 2.76 in) 375 g TS 35 Standard Models: 0 to 60 °C (32 to 140 °F) Wide Temp. Models: -40 to 75 °C (-40 to 167 °F) -40 to 85 °C (-40 to 185 °F) 5 to 95 % (non-condensing) UL 508 FCC Part 15, CISPR (EN55022) class A EN61000-4-2 (ESD), level 3; EN61000-4-3 (RS), level 3; EN61000-4-4 (EFT), level 3; EN61000-4-5 (Surge), level 3; EN61000-4-6 (CS), level 3; EN61000-4-8 IEC 60068-2-27 IEC 60068-2-32 IEC 60068-2-6 Shock Freefall Vibration MTBF (mean time between failures) Time 645.138 hrs Database Telcordia (Bellcore), GB Warranty Warranty Period 5 years 1381580000 – 2013 B.25 Power-over-Ethernet Switches – Premium Line Active components 6-port IEEE 802.3af/at PoE+ managed Ethernet Switch •4 IEEE 802.3af/at compliant PoE ports •Up to 30 watts per PoE port •24/48 V DC redundant wide-range power supply •Integrated DC/DC converter can supply 48 V-PoE devices across the entire input voltage range of 24 to 48 V DC •Extended PoE management functions, including PoE error checking or configuring the operational times of connected PoE devices PPLQ PPLQ B ,(6:3/03R(6HULHV PPLQ Technical data \% PPLQ Standards IEEE 802.3at/af for Power-over-Ethernet▪IEEE 802.3 for 10BaseT▪IEEE 802.3u for 100BaseT (X) and 100BaseFX▪IEEE 802.3x for Flow Control▪IEEE 802.1D for Spanning Tree Protocol▪IEEE 802.1w for Rapid STP▪IEEE 802.1Q for VLAN Tagging▪IEEE 802.1p for Class of Service▪IEEE 802.1X for Authentication▪IEEE 802.3ad for Port Trunk with LACP Protocols IGMPv1/v2▪GMRP▪GVRP▪SNMPv1/v2c/v3▪DHCP Server/Client▪DHCP Option 66/67/82▪ BootP▪TFTP▪SNTP▪SMTP▪RARP▪RMON▪HTTP▪HTTPS▪Telnet▪SSH▪Syslog▪ Modbus/TCP▪SNMP Inform▪LLDP▪IEEE 1588 PTP▪IPv6 MIB MIB-II▪Ethernet-Like MIB▪P-BRIDGE MIB▪Q-BRIDGE MIB▪Bridge MIB▪RSTP MIB▪ RMON MIB Group 1, 2, 3, 9 Flow Control IEEE 802.3x flow control▪back pressure flow control Switch Properties Priority Queues 4 Max. Number of Available VLANs 64 VLAN ID Range VID 1 to 4094 IGMP Groups 256 MAC Table Size 8K Packet Buffer Size 1 MBit Interface RJ45 Ports 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode and auto MDI/MDI-X connection PoE pin assignment V-, V-, V+, V+ for pin 1, 2, 3, 6 (endspan, MDI-X alternative A) Console Port RS 232 (RJ45 connector) DIP Switches Turbo Ring, Master, Coupler, Reserve LED Indicators PWR1, PWR2, FAULT, 10/100M, MSTR/HEAD, CPLR/TAIL, PoE Alarm Contact 2 relay outputs with current carrying capacity of 1 A @ 24 V DC Alarm Contact 2 inputs with the same ground, electrically isolated • +13 to +30 V for state “1” • -30 to +3 V for state “0” • Max. input current: 8 mA Power Requirements Input Voltage 24/48 (20 to 60 V) V DC Input Current Max. 7.8 A @ 24 V DC (supports up to 4 ports at 30 watts per PoE port) Overload Current Protection Present Connection 2 removable 6-contact terminal blocks Reverse Polarity Protection Present Technical data Housing Metal, IP 30 protection Dimensions (W x H x D) 80 x 135 x 131.5 mm (3.15 x 5.31 x 5.18 in) Weight 1270 g Installation DIN-Rail mounting B.26 Environmental Limits Operating Temperature Storage Temperature Ambient Relative Humidity Regulatory Approvals Safety EMI EMC Standard Models: 0 to 60 °C (32 to 140 °F) Wide Operating Temp. Models: -40 to 75 °C (-40 to 167 °F) -40 to 85 °C (-40 to 185 °F) 5 to 95 % (non-condensing) UL 508 FCC Part 15, CISPR (EN55022) class A EN61000-4-2 (ESD), level 3; EN61000-4-3 (RS), level 3; EN61000-4-4 (EFT), level 3; EN61000-4-5 (Surge), level 3; EN61000-4-6 (CS), level 3; EN61000-4-8 IEC 60068-2-27 IEC 60068-2-32 IEC 60068-2-6 Shock Freefall Vibration MTBF (mean time between failures) Time 433.000 hrs Database Telcordia (Bellcore), GB Warranty Warranty Period 5 years Ordering data Port Variants Type 2 * RJ45 10/100 BaseT(X), 4 * RJ45 IE-SW-PL06M-2TX-4PoE 10/100 BaseT(X) PoE+ IE-SW-PL06MT-2TX-4PoE Accessories External Backup and Restore Module 19" Rack Mounting Kit Type EBR-Modul RS232 RM-KIT Operating Temperature 0 to 60 °C -40 to +75 °C Order No. 1241390000 1286910000 Order No. 1241430000 1241440000 1381580000 – 2013 Active components Media converter B Media converter If high interference immunity is needed or long transmission distances are involved, then fibre-optic cables are advisable. Another advantage of using fibre-optic cabling is the insensitivity to lightning or voltage surges. The use of fibre-optic based systems is already established in the process industry, plant engineering, energy distribution and the wind energy branches. Multimode glass fibres allow distances of up to 5,000 m to be bridged without intermediate repeaters. Singlemode fibres can be used over distances of up to 40 km. One simple and inexpensive solution is offered by the media converter. This connects the Ethernet via an RJ45 port to an optical fibre-optic cable port with SC or ST glass fibre connections. This retains the collision domain between the two Ethernet participants and means that there is status transparency exchanged between the two Ethernet interfaces and the port status. B.32 1381580000 – 2013 Media converter - Value Line Industrial Fast Ethernet Media Converter PPLQ Active components •10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X •Link Fault Pass-Through (LFP) •Power failure, port break alarm by relay output •Redundant power inputs •Designed for hazardous locations (Class 1 Div. 2/Zone 2) ,(0&9/6HULHV PPLQ PPLQ T;u\% PPLQ Technical data Technology Standards Interfaces Fiber Ports RJ45 ports DIP Switches LED Indicators Alarm Contact Optical Fiber Wavelength Max. TX Min. TX RX Sensitivity Link-Budget Typical Distance Approvals Security EMI EMC IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT (X) and 100BaseFX 100BaseFX (SC/ST connectors) 10/100BaseT(X) 100BaseFX Full/Half duplex selection, port break alarm mask PWR1, PWR2, FAULT, 10/100M (TP port), 100M (Fiber port), FDX/COL (Fiber port) One relay output with current carrying capacity of 1 A @ 24 V DC 100BaseFX multimode 1300 nm -10 dBm -20 dBm -32 dBm 12 dB 5 km a 4 km b -6 dBm singlemode 1310 nm 0 dBm -5 dBm -34 dBm 29 dB 40 km c Saturation -3 dBm a 50/125 μm, 800 MHz*km fiber optic cable b 62.5/125 μm, 500 MHz*km fiber optic cable c 9/125 μm, 3.5 PS/(nm*km) fiber optic cable Power Requirements Input Voltage 24 V DC (12 to 48 V DC), redundant inputs Current consumption 0.16 A (@ 24 V) Connection Removable terminal block Overload Current Protection 1.1 A Reverse Polarity Protection Present Technical data Housing Metal, IP 30 protection Dimensions (W x H x D) 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in) Weight 630 g Installation TS 35 Environmental Limits Operating temperature Standard Models: 0 to 60 °C (32 to 140 °F) Wide Temp. Models: -40 to 75 °C (-40 to 167 °F) Operating Humidity 5 to 95 % RH Storage Temperature -40 to 85 °C (-40 to 185 °F) 1381580000 – 2013 B Hazardous Location UL 508, UL 60950-1, CSA C22.2 No. 60950-1, EN60950-1 FCC Part 15, CISPR (EN55022) class A EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 2; EN61000-4-6 (CS), level 3 EN61000-4-8 EN61000-4-11 UL/cUL Class1, Division 2, Groups A, B, C, and D, ATEX Class1, Zone 2, Ex nC IIC DNV, GL IEC60068-2-32 IEC60068-2-27 IEC60068-2-6 Maritime Freefall Shock Vibration MTBF (mean time between failures) Time 401.000 hrs Database MIL-HDBK-217F: GB 25 °C Warranty Warranty Period 5 years Ordering data Port Variants 1 * RJ45, 1 * SC-Multimode 1 * RJ45, 1 * ST-Multimode 1 * RJ45, 1 * SC-Singlemode Accessories 19" Rack Mounting Kit Type IE-MC-VL-1TX-1SC IE-MC-VLT-1TX-1SC IE-MC-VL-1TX-1ST IE-MC-VLT-1TX-1ST IE-MC-VL-1TX-1SCS IE-MC-VLT-1TX-1SCS Type RM-KIT Operating Temperature 0 to +60 °C -40 to +75 °C 0 to +60 °C -40 to +75 °C 0 to +60 °C -40 to +75 °C Order No. 1241400000 1286880000 1241410000 1286890000 1241420000 1286900000 Order No. 1241440000 B.33