Download

Industrial Ethernet Switches
Contents
Industrial Ethernet Switches
Overview
Industrial Ethernet Switches
2021700000
Unmanaged Switches
B.2
Unmanaged Switches Fast Ethernet
B.3
Unmanaged Switches Gigabit Ethernet
B.6
Managed Switches introduction
B.8
Managed Switches Fast Ethernet
B.13
Managed Switches Gigabit Ethernet
B.16
Power over Ethernet Switches
B.20
Unmanaged Switches Fast Ethernet - Power over Ethernet
B.21
Unmanaged Switches Gigabit Ethernet - Power over Ethernet
B.22
Managed Switches Fast Ethernet - Power over Ethernet
B.23
B
B.1
Industrial Ethernet Switches
Unmanaged Switches
Unmanaged Switches
Adaptable and universal
Switches are the basic coupling elements in Ethernet
networks. They connect the Ethernet participants together.
In an Ethernet network the communication basically
originates from the participants. The switches connect the
participants together and enable the communication.
Unmanaged switches are the simplest active network
component. They do not need to be configured and are
therefore very flexible. They use the basic standard protocols,
such as auto-negotiation, auto-crossing, and flow-control and
can automatically adjust to the different transmission speeds
or connector wiring.
B
Unmanaged switches are protocol transparent. Each port on
the switch creates an individual collision domain. The use of
twisted-pair cabling with an RJ45 interface or fibre-optic
cable based on the IEEE 802.3 specification interfaces are
supported by all Weidmüller switches.
B.2
2021700000
Industrial Ethernet Switches
Unmanaged Switches Fast Ethernet – Basic Line
Unmanaged Fast Ethernet Switches
•10/100BaseT(X) (RJ45 connector), 100BaseFX
(multi/singlemode, SC or ST connector)
•Redundant dual 12/24/48 V DC, 18 to 30 V AC power inputs
•IP 30 aluminum housing
•Rugged hardware design well suited for hazardous locations
(Class I Div. 2 /ATEX) and maritime environments (DNV/GL)
•–40 °C to 75 °C operating temperature range (T models)
78.8 mm (3.1 in)
30.0 mm (1.2 in)
50.0 mm (2.0 in)
125.0 mm (4.9 in)
115.0 mm (4.5 in)
70.0 mm (2.8 in)
IE-SW-BL05-Series
B
T;u\%
IE-SW-BL08-Series
Technical data
Technology
Standards
Processing Type
Flow Control
Switch Properties
MAC Table Size
Packet Buffer Size
Interface
Fibre Ports
RJ45 Ports
DIP Switches
LED Indicators
Optical Fibre
Wavelength
Max. Transmit power
Min. Transmit power
RX Sensitivity
Link Budget
Typical Distance
Saturation
Power Requirements
Input Voltage
Input Current
Overload Current Protection
Connection
Reverse Polarity Protection
Physical Characteristics
Housing
Dimensions (W x H x D)
Weight
Installation
Environmental Limits
Operating Temperature
Storage Temperature
Ambient Relative Humidity
Regulatory Approvals
Safety
2021700000
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT (X) and 100BaseFX
IEEE 802.3x for Flow Control
Store and Forward
IEEE 802.3x flow control, back pressure flow control
1K
512 KBit
100BaseFX ports
(SC/ST connector, multimode, singlemode)
10/100BaseT(X) auto negotiation speed, Full/Half duplex
mode, and auto MDI/MDI-X connection
Enable/Disable broadcast storm protection
Power, 10/100M (TP port), 100M (fibre port)
100BaseFX
multimode
1300 nm
-10 dBm
-20 dBm
-32 dBm
12 dB
5 km (50/125 μm multimode cable)
4 km (62.5/125 μm multimode cable)
-6 dBm
singlemode
1310 nm
0 dBm
-5 dBm
-34 dBm
29 dB
40 km (9/125 μm
singlemode cable)
-3 dBm
12/24/48 V DC (9.6 to 60 V DC),
18 to 30 V AC (47 to 63 Hz),
redundant dual inputs
IE SW BL05 5TX: 0.1 A @ 24 V
IE SW BL05 1SC/1ST/1SCS: 0.11 A @ 24 V
IE SW BL08 8TX: 0.13 A @ 24 V
IE SW BL08 2SC/2ST/2SCS: 0.22 A @ 24 V
IE SW BL08 1SC/1ST/1SCS: 0.17 A @ 24 V
1.1 A
1 removable 4-contact terminal block
Present
Aluminum, IP 30 protection
IIE-SW-BL05-Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in)
IE-SW-BL08-Series: 50 x 115 x 70 mm (1.96 x 4.52 x 2.76 in)
IE-SW-BL05-5TX: 175 g
IE-SW-BL08-8TX: 275 g
DIN rail, wall (with optional mounting kit)
Standard Models: -10 to 60 °C (14 to 140 °F)
Wide Temp. Models: -40 to 75 °C (-40 to 167 °F)
-40 to 85 °C (-40 to 185 °F)
5 to 95 % (non-condensing)
UL 508, UL 60950-1
Regulatory Approvals
Hazardous Location
UL/cUL Class I, Division 2, Groups A, B, C and D;
ATEX Zone 2 Ex nA IIC T4 Gc
EMI
FCC Part 15, CISPR (EN55022) class A
EMC
EN61000-4-2 (ESD), level 3;
EN61000-4-3 (RS), level 3;
EN61000-4-4 (EFT), level 3;
EN61000-4-5 (Surge), level 3;
EN61000-4-6 (CS), level 3;
EN61000-4-8; EN61000-4-11
Maritime
DNV, GL (not for 1412110000, 1412120000, 1412070000,
1412080000, 1412090000, 1412100000)
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-32
Vibration
IEC 60068-2-6
MTBF (meantime between failures)
IE-SW-BL05-Series: 3,040,784 hrs, IE-SW-BL08-Series: 2,428,212 hrs
Time
Database
Telcordia (Bellcore), GB
Warranty
Warranty Period
5 years
Ordering Information
Version
5 * RJ45
4 * RJ45, 1 * SC-Multimode
4 * RJ45, 1 * ST-Multimode
4 * RJ45, 1 * SC-Singlemode
8 * RJ45
6 * RJ45, 2 * SC-Multimode
6 * RJ45, 2 * ST-Multimode
6 * RJ45, 2 * SC-Singlemode
7 * RJ45, 1 * SC-Multimode
7 * RJ45, 1 * ST-Multimode
7 * RJ45, 1 * SC-Singlemode
Model Type
IE-SW-BL05-5TX
IE-SW-BL05T-5TX
IE-SW-BL05-4TX-1SC
IE-SW-BL05T-4TX-1SC
IE-SW-BL05-4TX-1ST
IE-SW-BL05T-4TX-1ST
IE-SW-BL05-4TX-1SCS
IE-SW-BL05T-4TX-1SCS
IE-SW-BL08-8TX
IE-SW-BL08T-8TX
IE-SW-BL08-6TX-2SC
IE-SW-BL08T-6TX-2SC
IE-SW-BL08-6TX-2ST
IE-SW-BL08T-6TX-2ST
IE-SW-BL08-6TX-2SCS
IE-SW-BL08T-6TX-2SCS
IE-SW-BL08-7TX-1SC
IE-SW-BL08T-7TX-1SC
IE-SW-BL08-7TX-1ST
IE-SW-BL08T-7TX-1ST
IE-SW-BL08-7TX-1SCS
IE-SW-BL08T-7TX-1SCS
Operating
Temperature
-10 to +60 °C
-40 to +75 °C
-10 to +60 °C
-40 to +75 °C
-10 to +60 °C
-40 to +75 °C
-10 to +60 °C
-40 to +75 °C
-10 to +60 °C
-40 to +75 °C
-10 to +60 °C
-40 to +75 °C
-10 to +60 °C
-40 to +75 °C
-10 to +60 °C
-40 to +75 °C
-10 to +60 °C
-40 to +75 °C
-10 to +60 °C
-40 to +75 °C
-10 to +60 °C
-40 to +75 °C
Order No.
1240840000
1240850000
1240890000
1286550000
1240880000
1286540000
1240870000
1286530000
1240900000
1286560000
1240910000
1240920000
1240930000
1286570000
1412110000
1412120000
1412070000
1412080000
1412090000
1412100000
1240950000
1286580000
Accessories
19'' Rack Mounting Kit
Wall mounting kit for
IE-SW-BL05 series
Wall mounting kit for
IE-SW-BL08 series
Model Type
RM-KIT
Order No.
1241440000
IE-WALLMOUNT-KIT-30M
1504450000
IE-WALLMOUNT-KIT-46MM
1504440000
B.3
Industrial Ethernet Switches
Unmanaged Switches Fast Ethernet – Value Line
Unmanaged Fast Ethernet Switches
•Redundant dual 24 V DC power inputs
•Relay output warning for power failure and port break alarm
•Broadcast storm protection
•Transparent transmission of VLAN tagged packets
•–40 °C to 75 °C operating temperature range (T models)
IE-SW-VL09-Series
IE-SW-VL16-Series
TX
PWR1
PWR2
8
FAULT
135.0 mm (5.3 in)
135.0 mm (5.3 in)
B
RX
100M
100M 100M
TX
7
9
RX
5
3
6
4
T;u\%
100M
1
2
10M
105.0 mm (4.1 in)
80.5 mm (3.2 in)
53.6 mm (2.1 in)
Technical data
Technology
Standards
Processing Type
Flow Control
Switch Properties
MAC Table Size
Packet Buffer Size
Interface
Fibre Ports
RJ45 Ports
DIP Switches
LED Indicators
Alarm Contact
Optical Fibre
Wavelength
Max. TX
Min. TX
RX Sensitivity
Link Budget
Typical Distance
Saturation
Power Requirements
Input Voltage
Input Current
Overload Current Protection
Connection
Reverse Polarity Protection
Physical Characteristics
Housing
Dimensions (W x H x D)
Weight
B.4
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for Flow Control
Store and Forward
IEEE 802.3x flow control, back pressure flow control
1 K (IE-SW-VL09...Series), 4 K (IE-SW-VL16...Series)
512 Kbit (IE-SW-VL09...Series),
1.25 MBit (IE-SW-VL16...Series)
100BaseFX ports (SC/ST connector)
10/100BaseT(X) auto negotiation speed,
Full/Half duplex mode, and
auto MDI/MDI-X connection
Port fault alarm
Enable/disable broadcast storm protection
PWR1, PWR2, FAULT, 10/100M (TP port),
100M (fibre port)
1 relay output with current carrying capacity of 1 A @ 24 V DC
100BaseFX
multimode
1300 nm
-10 dBm
-20 dBm
-32 dBm
12 dB
5 km (50/125 μm multimode cable)
4 km (62.5/125 μm multimode cable)
-6 dBm
IE-SW-VL09: 24 V DC (12 to 45 V DC), redundant dual inputs
IE-SW-VL16: 12/24/48 V DC (9.6 to 60 V DC), redundant dual inputs
IE-SW-VL09T-6TX-3SC: 0.31 A @ 24 V
IE-SW-VL16-16TX: 0.27 A @ 24 V
IE-SW-VL16 SC/ST: 0.44 A @ 24 V
1.6 A
1 removable 6-pin terminal blocks
Present
Metal, IP 30 protection
IE-SW-VL09...Series:
53.6 x 135 x 105 mm
(2.11 x 5.31 x 4.13 in)
IE-SW-VL16...Series:
80.5 x 135 x 105 mm
(3.16 x 5.31 x 4.13 in)
IE-SW-VL09: 790 g
IE-SW-VL16: 1140 g
Physical Characteristics
Installation
Environmental Limits
Operating Temperature
Storage Temperature
Ambient Relative Humidity
Regulatory Approvals
Safety
Hazardous Location
EMI
EMC
DIN-Rail mounting
Standard Models: 0 to 60 °C (32 to 140 °F)
Wide Temp. Models: -40 to 75 °C
(-40 to 167 °F)
-40 to 85 °C (-40 to 185 °F)
5 to 95 % (non-condensing)
UL 508, UL 60950-1
CSA C22.2 No. 60950-1, EN60950-1
UL/cUL Class I, Division 2, Groups A, B, C
and D; ATEX Zone 2 Ex nA nC IIC T4 Gc
FCC Part 15, CISPR (EN55022) class A
EN61000-4-2 (ESD), level 3;
EN61000-4-3 (RS), level 3;
EN61000-4-4 (EFT), level 3;
EN61000-4-5 (Surge), level 3;
EN61000-4-6 (CS), level 3;
DNV, GL
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
Maritime
Shock
Freefall
Vibration
MTBF (mean time between failures)
Time
IE-SW-VL09...Series: 396,000 hrs
IE-SW-VL16...Series: 257,000 hrs
Database
MIL-HDBK-217F, GB 25 °C
Warranty
Warranty Period
5 years
Ordering Information
Version
16 * RJ45
6 * RJ45, 3 * SC-Multimode
14 * RJ45, 2 * SC-Multimode
14 * RJ45, 2 * ST-Multimode
Accessories
19'' Rack Mounting Kit
Wall mounting kit
Model Type
IE-SW-VL16-16TX
IE-SW-VL16T-16TX
IE-SW-VL09T-6TX-3SC
IE-SW-VL16-14TX-2SC
IE-SW-VL16T-14TX-2SC
IE-SW-VL16-14TX-2ST
IE-SW-VL16T-14TX-2ST
Model Type
RM-KIT
IE-WALLMOUNT-KIT-46MM
Operating
Temperature
0 to +60 °C
-40 to +75 °C
-40 to +75 °C
0 to +60 °C
-40 to +75 °C
0 to +60 °C
-40 to +75 °C
Order No.
1241000000
1286590000
1240980000
1241030000
1286610000
1241050000
1286620000
Order No.
1241440000
1504440000
2021700000
Industrial Ethernet Switches
Unmanaged Switches Fast Ethernet – Value Line
IP 67 unmanaged Fast Ethernet Switches
•M12 connection system and IP67 protected housing
•10/100BaseT (X), 4-pin M12 (D-coded)
•Full/half duplex mode and auto MDI/MDI-X
•Input voltage 12 to 45 V DC, 18 to 30 V AC
27.6 mm
60 mm
107 mm
125 mm
21 mm
36 mm
B
\%
29.6 mm
Technical data
Technology
Standards
Processing Type
Flow Control
Switch Properties
MAC Table Size
Packet Buffer Size
Interface
M12-Ports
LED Indicators
Power Requirements
Input Voltage
Input Current
Overload Current Protection
Connection
Reverse Polarity Protection
Physical Characteristics
Housing
Dimensions (W x H x D)
Weight
Installation
Environmental Limits
Operating Temperature
Storage Temperature
Ambient Relative Humidity
2021700000
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT (X)
IEEE 802.3x for Flow Control
Store and Forward
IEEE 802.3x flow control, back pressure flow control
2K
384 Kbit
10/100BaseT (X) auto negotiation, full/half duplex mode and auto
MDI/MDI-X connection, 4-pin, D-coded
PWR, LNK/ACT
24 V DC (12 to 45 V DC)
18 to 30 V AC (47 to 63 Hz)
0,12 A @ 24 V DC
0,28 A @ 24 V AC
1,1 A
1 x M12 socket, A-coded
Present
Plastic, IP 67 protection, encapsulated
60 x 125 x 29.6 mm (2.36 x 4.92 x 1.09 Zoll)
270 g
Wall mounting, screwed
Regulatory Approvals
Safety
EMC
UL 508
FCC Part 15 Subpart B Class A, EN 55022 Class A
EN61000-4-2 (ESD), level 3;
EN61000-4-3 (RS), surpasses level 3;
EN61000-4-4 (EFT), level 3;
EN61000-4-5 (Surge), level 3;
EN61000-4-6 (CS),level 2;
EN61000-4-8; EN61000-4-11
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-32
Vibration
IEC 60068-2-6
MTBF (mean time between failures)
370.224 hrs
Time
Database
Telcordia (Bellcore), GB
Warranty
Warranty Period
5 years
Ordering data
Version
5 * M12 10/100BaseT(X)
Model Type
IE-SW-IP67-5M12
IE-SW-IP67T-5M12
Operating
Temperature
-25 to +60 °C
-40 to +75 °C
Order No.
1504410000
1504420000
Standard Models: -25 to 60 °C (-13 to 140 °F)
Wide Temp. Models: -40 to 75 °C (-40 to 167 °F)
-40 to 85 °C (-40 to 185 °F)
5 to 95 % (non-condensing)
B.5
Industrial Ethernet Switches
Unmanaged Switches Gigabit Ethernet – Basic/Value Line
Unmanaged Gigabit Ethernet Switches
•Full Gigabit Ethernet on all ports
•Variants with slots for Gigabit SFP transceivers
•Redundant dual 12/24/48 V DC power inputs
•Relay output warning for power failure and port break alarm
•Broadcast storm protection
•Supports jumbo frame transmission (up to 9.6 KB)
IE-SW-VL08-xGT-Series
IE-SW-BL05GT-Series
130.0 mm (5.1 in)
135.0 mm (5.3 in)
B
105.0 mm (4.1 in)
53.6 mm (2.1 in)
105.0 mm (4.1 in)
Technical data
Technology
Standards
Processing Type
Flow Control
Switch Properties
MAC Table Size
Packet Buffer Size
Jumbo frame support
Interface
Fibre Ports
RJ45 Ports
DIP Switches
LED Indicators
Alarm Contact
Power Requirements
Input Voltage
Input Current
Connection
Reverse Polarity Protection
Physical Characteristics
Housing
Dimensions (W x H x D)
Weight
Installation
Environmental Limits
Operating Temperature
Storage Temperature
Ambient Relative Humidity
Regulatory Approvals
Safety
Hazardous Location
EMI
B.6
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
Store and Forward
IEEE 802.3x flow control, back pressure flow control
8K
1088 KBit (IE-SW-BL05-5GT),
1408 KBit (IE-SW-VL08-xGT)
up to 9.6 KB
100/1000BaseSFP slot (only IE-SW-VL08-6GT-2GS)
10/100/1000BaseT(X) auto negotiation speed,
Full/Half duplex mode, and
auto MDI/MDI-X connection
Port fault alarm
Enable/disable broadcast storm protection
Enable/disable jumbo frame support
PWR1, PWR2, FAULT, 10/100/1000M
1 relay output with current carrying capacity of 1 A @ 24 V DC
12/24/48 V DC (9.6 to 60 V DC),
redundant dual inputs
IE-SW-BL05-5GT: 0.20 A @ 24 V
IE-SW-VL08-8GT: 0.32 A @ 24 V
IE-SW-VL08-6GT-2GS: 0.34 A @ 24 V
1 removable 6-contact terminal block
Present
Metal, IP 30 protection
IE-SW-BL05-5GT:
35 x 130 x 105 mm (1.37 x 5.12 x 4.13 in)
IE-SW-VL08-xGT:
53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
IE-SW-BL05-5GT: 290 g
IE-SW-VL08-8GT 630 g
DIN-Rail mounting
T;u\%
35.0 mm (1.4 in)
Regulatory Approvals
EMC
EN61000-4-2 (ESD), level 3;
EN61000-4-3 (RS), level 3;
EN61000-4-4 (EFT), level 3;
EN61000-4-5 (Surge), level 3;
EN61000-4-6 (CS), level 3
DNV, GL
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
Maritime
Shock
Freefall
Vibration
MTBF (mean time between failures)
Time
478.000 hrs (Serie IE-SW-BL05-5GT)
325.000 hrs (Serie IE-SW-VL08-XGT)
Database
Telcordia (Bellcore), GB (IE-SW-VL08-xGT series)
Warranty
Warranty Period
5 years
Ordering Information
Version
5 * RJ45 10/100/1000BaseT(X)
8 * RJ45 10/100/1000BaseT(X)
6 * RJ45 10/100/1000BaseT(X),
2 Combo Ports (10/100/1000
BaseT(X) or 100/1000BaseSFP)
Accessories
19'' Rack Mounting Kit
Wall mounting kit
Model Type
IE-SW-BL05-5GT
IE-SW-BL05T-5GT
IE-SW-VL08-8GT
IE-SW-VL08T-8GT
IE-SW-VL08-6GT-2GS
IE-SW-VL08T-6GT-2GS
Model Type
RM-KIT
IE-WALLMOUNT-KIT-46MM
Operating
Temperature
0 to 60 °C
-40 to +75 °C
0 to +60 °C
-40 to +75 °C
0 to +60 °C
-40 to +75 °C
Order No.
1241250000
1286850000
1241270000
1286860000
1241280000
1286870000
Order No.
1241440000
1504440000
Standard Models: 0 to 60 °C (32 to 140 °F)
Wide Temp. Models: -40 to 75 °C
(-40 to 167 °F) (on request)
-40 to 85 °C (-40 to 185 °F)
5 to 95 % (non-condensing)
UL 508
UL/cUL Class I, Division 2, Groups A, B, C, and D;
ATEX Zone 2 Ex nA nC IIC T4 Gc
FCC Part 15, CISPR (EN55022) class A
Note
The IE-SW-VL08-6GT-2GS supports up to 2x 100/1000Base SFP slots. Corresponding SFP modules for Fast/
Gigabit Ethernet, see page F.8.
2021700000
B
2021700000
B.7
Industrial Ethernet Switches
Industrial Ethernet Switches
Managed Switches introduction
Managed Switches
Configurable according to requirements
Managed switches offer extensive control mechanisms for
data distribution and bandwidth management to co-ordinate
and cope with the different requirements of communication
participants in an industrial network. Configuration is either
web-based using a simple and intuitive user interface or via a
serial console.
B
B.8
Powerful and reliable network redundancy
It is particularly important to have network redundancy
to ensure system availability in today’s Industrial Ethernet
infrastructures. This is because in a highly integrated
system, a connection error can lead to machine stoppage
and thus to production losses. To minimise such risks in
a managed Ethernet network, Weidmüller has integrated
high-performance redundancy mechanisms into its managed
switches. This is in addition to the RSTP/STP standard and
port-trunking.
2021700000
Industrial Ethernet Switches
Managed Switches introduction
Ring redundancy
The Turbo-Ring technology integrated into Weidmüller’s
switches allows you to restore a network connection in case
of failure in under 20 ms, and this with up to 250 switches
in a ring. Turbo-Ring offers thee different topology options
(Ring-Coupling, Dual-Ring and Dual-Homing) for different
application requirements to ensure the maximum possible
availability of industrial network applications.
B
7XUER5LQJ
UHFRYHU\WLPHPV
Ring-Coupling
In some applications, it is not sensible to have all equipment
and devices in a single large redundant ring networked
together, as some of the devices may be located in remote
parts of the plant. For such structures, Ring-Coupling is
ideal. It connects devices in multiple, smaller rings that are
connected redundantly and directly with one another.
3ULPDU\3DWK
0DVWHU
0DVWHU
%DFNXS3DWK
Dual-Homing
With Dual-Homing, two separate rings are connected
through one managed switch via two independent
connection points. The back-up connection is activated if the
primary connection fails.
3ULPDU\3DWK
0DVWHU
%DFNXS3DWK
0DVWHU
2021700000
B.9
Industrial Ethernet Switches
Managed Switches introduction
Dual-Ring
B
In a Dual-Ring, two neighbouring rings are connected
with one another using one switch, without the need for
additional ports or cabling. This configuration reduces
the total number of ports and saves cabling costs, as an
additional primary and back-up line is not needed.
0DVWHU
0DVWHU
Turbo-Chain
0DQDJHG(WKHUQHW6ZLWFK
Turbo-Chain offers the possibility of creating multiple
redundant networks without the limitations of ring
technology. Turbo-Chain can be simply configured by
defining two end-points in a segment. This means you can
connect or extend existing redundant networks. When
compared with traditional ring coupling or a network
re-design, Turbo-Chain is more flexible as well as being
more cost efficient and it has significant savings potential
when compared to the effort for network restructuring
and re-cabling. In addition Turbo Chain also supports
IEEE 802.1w/D RSTP and STP protocols.
• Flexible network topology
• Unlimited and simple network expansion
• Quick troubleshooting (recovery time < 20 ms)
• Cost-effective configurations
%DFNXS3DWK
+HDGVZLWFK²KDVIRUZDUGLQJVWDWXV
7DLOVZLWFK²KDVEORFNLQJVWDWXV
5HFRYHU\WLPHPV
Port trunking for flexible connections
IEEE 802.3ad (LACP, Link Aggregation Control Protocol)
permits flexible network connections and a redundant path
for critical applications. It provides the means for a user to
link via a higher bandwidth over the PremiumLine managed
switches by combining more ports into a trunk group.
636
636
636
636
B.10
636
8SWRHLJKWSRUWVFDQEHFRQQHFWHGWRJHWKHU
LQWRRQHWUXQNJURXS
636
636
636
2021700000
Industrial Ethernet Switches
Managed Switches introduction
QoS supports real-time capability
Quality of Service (QoS) enables the possibility of
prioritisation of data traffic in a network and ensures
that important data is consistently available. Weidmüller
managed switches can deal with IEEE 802.1p/1Q layer
2 CoS tags and also layer 3 TOS information. The QoS
functionality of Weidmüller’s managed switches improves
network performance and ensures that time-critical
applications are given priority.
IGMP snooping and GMRP for filtering multicast
data traffic
Weidmüller managed switches support GMRP (Generic
Multicast Registration Protocol) and IGMP snooping.
These protocols limit multicast data traffic so that it is only
forwarded to the devices that actually require it. This reduces
unnecessary network data traffic.
B
/RZSULRULW\
'DWD
+LJKHVWSULRULW\
&RQWUROPHVVDJHV
/RZ
SULRULW\
+LJK
SULRULW\
+LJKHVW
SULRULW\
+LJKSULRULW\
0DQDJHPHQW
PHVVDJHV
*URXS
0XOWLFDVWPHVVDJHV
,*03JURXS
*URXS
0XOWLFDVWPHVVDJHV
,*03JURXS
,*03JURXS
,*03JURXS
IEEE 1588 PTP - improves time synchronisation of
automation devices
IEEE 1588 PTP, also known as Precision Time Protocol (PTP),
was developed to synchronise real-time clocks which are
located at specific nodes of a distributed system.
Weidmüller managed switches with IEEE 1588 PTP are
particularly suited for motion control applications where
distributed clocks must be synchronised with high levels of
accuracy.
2021700000
0
0
6
0
0
*UDQGPDVWHUFORFN
VHWVWKHUHIHUHQFHWLPH
IRUWKHV\VWHP
%RXQGDU\FORFN
LVDVODYHWRWKHJUDQGPDVWHU
FORFNDQGKDVPDVWHUVWDWXV
RYHULWVRZQVODYHV
6
6
6
636
636
636
2UGLQDU\FORFN
LVDVODYHWRLWV
PDVWHU
B.11
Industrial Ethernet Switches
Managed Switches introduction
VLAN – simplifies network planning
9/$1
9/$1
7LHU
B
9/$1
VLAN stands for virtual LAN. It is a network structure with all
the characteristics of a normal LAN, but not geographically
constrained. A network can be divided into different sections
using the VLAN function. It is possible, for example, to group
servers or workstations together, based on their function.
Data will only then be sent to Ethernet devices of a specific
VLAN group. The option for isolating VLANs completely from
one another serves to increase the security of data transfer
and offers additional protection from unauthorised access or
unauthorised data traffic.
636
636
7LHU
636
7LHU
'LYLVLRQ
'LYLVLRQ
'LYLVLRQ
Automatic topology detection using LLDP
The Link Layer Discovery Protocol (LLDP - IEEE 802.1AB) is
a data link layer protocol which publishes information about
a device containing its IP address, description and functional
information to its neighbouring devices over the network. All
of Weidmüller’s managed switches fully support LLDP.
&OLHQW
ZZZ
6HUYHU
Simple browser based configuration
Weidmüller’s managed switches can be easily configured
using a web browser, telnet console or the Weidmüller
switch configuration utility. Further switch configurations
can be saved or the firmware updated using this userfriendly tool.
B.12
2021700000
Industrial Ethernet Switches
Managed Switches Fast Ethernet – Value Line
5-Port Managed Entry-level Ethernet Switches
•Supports the automation protocols Modbus/TCP, PROFINET RT and EtherNet/IP
•Turbo Ring and Turbo Chain with fast recovery time (<20 ms @ 250 switches)
•IGMP snooping, QoS, port- and tag-based VLAN
•Configurable error messages via SNMP trap, e-mail or relay output
•User-friendly, web-based configuration and management
PPLQ
PPLQ
PPLQ
Technical data
PPLQ
Standards
IEEE 802.3 for 10BaseT▪IEEE 802.3u for 100BaseT(X) and 100BaseFX▪IEEE 802.3x for Flow Control▪
IEEE 802.1D-2004 for Spanning Tree Protocol▪IEEE 802.1w for Rapid STP▪IEEE 802.1p for Class of
Service▪IEEE 802.1Q for VLAN Tagging
Protocols
IGMPv1/v2▪GMRP▪GVRP▪SNMPv1/v2c/v3▪DHCP Server/Client▪TFTP▪SNTP▪SMTP▪RARP▪
RMON▪HTTP▪Telnet▪Syslog▪DHCP Option 66/67/82▪BootP▪LLDP▪Modbus/TCP▪PROFINET RT
(PROFINET-IO device in compliance with Conformance Class B)▪EtherNet/IP (CIP support)▪IPv6
MIB
MIB-II▪Ethernet-like MIB▪P-BRIDGE MIB▪Bridge MIB▪RSTP MIB▪RMON MIB Group 1, 2, 3, 9 ▪Private
MIB
Flow Control
IEEE 802.3x flow control ▪back pressure flow control
Switch Properties
MAC Table Size
2K
Packet Buffer Size
1 MBit
Interface
Fibre Ports
100BaseFX ports (SC/ST connector)
RJ45 Ports
10/100BaseT(X) auto negotiation speed,
Full/Half duplex mode, and
auto MDI/MDI-X connection
Console Port
RS 232 (RJ45 connector)
DIP Switches
Turbo Ring, Master, Coupler, Reserve
LED Indicators
PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL, 10/100M
Alarm Contact
1 relay output with current carrying capacity of 1 A @ 24 V DC
Optical Fibre
100BaseFX
multimode
Wavelength
1300 nm
Max. TX
-10 dBm
Min. TX
-20 dBm
RX Sensitivity
-32 dBm
Link Budget
12 dB
5 km a
Typical Distance
4 km b
Saturation
-6 dBm
a
50/125 μm, 800 MHz*km fibre optic cable
b
62.5/125 μm, 500 MHz*km fibre optic cable
Power Requirements
Input Voltage
24 V DC (12 to 45 V DC), redundant dual inputs
Input Current
IE-SW-VL05M-5TX: 0.24 A @ 24 V
IE-SW-VL05M-3TX-2ST/2SC: 0.32 A @ 24 V
Overload Current Protection
Present
Connection
1 removable 6-contact terminal block
Reverse Polarity Protection
Present
Physical Characteristics
Housing
Metal, IP 30 protection
Dimensions (W x H x D)
53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Weight
IE-SW-VL05M-...5TX/3TX-2SC/3TX-2ST: 650 g
Installation
TS 35, wall mounting (with optional mounting kit)
2021700000
B
T;\%
Environmental Limits
Operating Temperature
Storage Temperature
Ambient Relative Humidity
Regulatory Approvals
Safety
Hazardous Location
EMI
EMC
Standard models: 0 to 60 °C (32 to 140 °F)
Models with extended temperature range: -40 to 75 °C
(-40 to 167 °F)
-40 to 85 °C (-40 to 185 °F)
5 to 95 % (non-condensing)
UL 508, UL 60950-1, CSA C22.2 No. 60950-1, EN60950-1
UL/cUL Class I, Division 2, Groups A, B, C and D
FCC Part 15, CISPR (EN55022) class A
EN61000-4-2 (ESD), level 3;
EN61000-4-3 (RS), level 3;
EN61000-4-4 (EFT), level 3;
EN61000-4-5 (Surge), level 3;
EN61000-4-6 (CS), level 3;
EN61000-4-8
DNV
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
Maritime
Shock
Freefall
Vibration
MTBF (mean time between failures)
Time
852,421 hrs
Database
Telcordia (Bellcore), GB
Warranty
Warranty Period
5 years
Ordering data
Version
Model Type
5 * RJ45
5 * RJ45
3 * RJ45, 2 * SC-Multimode
3 * RJ45, 2 * SC-Multimode
3 * RJ45, 2 * ST-Multimode
3 * RJ45, 2 * ST-Multimode
IE-SW-VL05M-5TX
IE-SW-VL05MT-5TX
IE-SW-VL05M-3TX-2SC
IE-SW-VL05MT-3TX-2SC
IE-SW-VL05M-3TX-2ST
IE-SW-VL05MT-3TX-2ST
Accessories
External Backup and
Restore Module
19'' Rack Mounting Kit
Wall mounting kit
Operating
Temperature
0 to +60 °C
-40 to +75 °C
0 to +60 °C
-40 to +75 °C
0 to +60 °C
-40 to +75 °C
Order No.
1504280000
1504310000
1504330000
1504350000
1504370000
1504390000
Model Type
EBR-Module RS232
Order No.
1241430000
RM-KIT
IE-WALLMOUNT-KIT-46MM
1241440000
1504440000
B.13
Industrial Ethernet Switches
Managed Switches Fast Ethernet – Value Line
8-Port Managed Entry-level Ethernet Switches
•Supports the automation protocols Modbus/TCP, PROFINET RT and EtherNet/IP
•Turbo Ring and Turbo Chain with fast recovery time (<20 ms @ 250 switches)
•IGMP snooping, QoS, port- and tag-based VLAN
•Configurable error messages via SNMP trap, e-mail or relay output
•User-friendly, web-based configuration and management
PPLQ
PPLQ
B
PPLQ
Technical data
PPLQ
Standards
IEEE 802.3 for 10BaseT▪IEEE 802.3u for 100BaseT(X) and 100BaseFX▪IEEE 802.3x for Flow Control▪
IEEE 802.1D-2004 for Spanning Tree Protocol▪IEEE 802.1w for Rapid STP▪IEEE 802.1p for Class of
Service▪IEEE 802.1Q for VLAN Tagging
Protocols
IGMPv1/v2▪GMRP▪GVRP▪SNMPv1/v2c/v3▪DHCP Server/Client▪TFTP▪SNTP▪SMTP▪RARP▪
RMON▪HTTP▪Telnet▪Syslog▪DHCP Option 66/67/82▪BootP▪LLDP▪Modbus/TCP▪PROFINET RT
(PROFINET-IO device in compliance with Conformance Class B)▪EtherNet/IP (CIP support)▪IPv6
MIB
MIB-II▪Ethernet-like MIB▪P-BRIDGE MIB▪Bridge MIB▪RSTP MIB▪RMON MIB Group 1, 2, 3, 9 ▪Private
MIB
Flow Control
IEEE 802.3x flow control ▪back pressure flow control
Switch Properties
MAC Table Size
8K
Packet Buffer Size
1 MBit
Interface
Fibre Ports
100BaseFX ports (SC/ST connector)
RJ45 Ports
10/100BaseT(X) auto negotiation speed,
Full/Half duplex mode, and
auto MDI/MDI-X connection
Console Port
RS 232 (RJ45 connector)
DIP Switches
Turbo Ring, Master, Coupler, Reserve
LED Indicators
PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL, 10/100M
Alarm Contact
1 relay output with current carrying capacity of 1 A @ 24 V DC
Optical Fibre
100BaseFX
multimode
singlemode
Wavelength
1300 nm
1310 nm
Max. TX
-10 dBm
0 dBm
Min. TX
-20 dBm
-5 dBm
RX Sensitivity
-32 dBm
-34 dBm
Link Budget
12 dB
29 dB
5 km a
40
km c
Typical Distance
4 km b
Saturation
-6 dBm
-3 dBm
a
50/125 μm, 800 MHz*km fibre optic cable
b
62.5/125 μm, 500 MHz*km fibre optic cable
c
9/125 μm singlemode fibre optic cable
Power Requirements
Input Voltage
24 V DC (12 to 45 V DC), redundant dual inputs
Input Current
IE-SW-VL08M-8TX: 0.26 A @ 24 V
IE-SW-VL08M-6TX-2ST/2SC/2SCS: 0.35 A @ 24 V
IE-SW-VL08M-5TX-3SC/1SC-2SCS: 0.32 A @ 24 V
Overload Current Protection
Present
Connection
1 removable 6-contact terminal block
Reverse Polarity Protection
Present
Physical Characteristics
Housing
Metal, IP 30 protection
Dimensions (W x H x D)
53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Weight
IE-SW-VL08MT-...8TX/6TX-2SC/6TX-2ST/6TX-2SCS: 650 g
IE-SW-VL08MT-...5TX/3SC/5TX-1SC-2SCS: 890 g
B.14
T;u\%
Physical Characteristics
Installation
Environmental Limits
Operating Temperature
Storage Temperature
Ambient Relative Humidity
Regulatory Approvals
Safety
Hazardous Location
TS 35, wall mounting (with optional mounting kit)
Standard models: 0 to 60 °C (32 to 140 °F)
Models with extended temperature range: -40 to 75 °C
(-40 to 167 °F)
-40 to 85 °C (-40 to 185 °F)
5 to 95 % (non-condensing)
UL 508, UL 60950-1, CSA C22.2 No. 60950-1, EN60950-1
UL/cUL Class I, Division 2, Groups A, B, C and D;
ATEX Zone 2 Ex nA nC IIC T4 Gc*
EMI
FCC Part 15, CISPR (EN55022) class A
EMC
EN61000-4-2 (ESD), level 3;
EN61000-4-3 (RS), level 3;
EN61000-4-4 (EFT), level 3;
EN61000-4-5 (Surge), level 3;
EN61000-4-6 (CS), level 3;
EN61000-4-8
Maritime
DNV, GL**
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-32
Vibration
IEC 60068-2-6
MTBF (mean time between failures)
Time
1,102,845 hrs
363.000 hrs (models IE-SW-VL08MT-5TX-3SC und IE-SW-VL08MT5TX-1SC-2SCS)
Database
Telcordia (Bellcore), GB
Warranty
Warranty Period
5 years
Ordering data
Version
8 * RJ45
5 * RJ45, 3 * SC-Multimode
5 * RJ45, 1 * SC-Multimode,
2 * SC-Singlemode
6 * RJ45, 2 * ST-Multimode
6 * RJ45, 2 * SC-Multimode
6 * RJ45, 2 * SC-Singlemode
Model Type
Operating
Temperature
IE-SW-VL08MT-8TX
-40 to +75 °C
IE-SW-VL08MT-5TX-3SC
-40 to +75 °C
IE-SW-VL08MT-5TX-1SC-2SCS -40 to +75 °C
1240940000
1240970000
1345240000
IE-SW-VL08MT-6TX-2ST
IE-SW-VL08MT-6TX-2SC
IE-SW-VL08MT-6TX-2SCS
1240990000
1344770000
1241020000
-40 to +75 °C
-40 to +75 °C
-40 to +75 °C
Order No.
Accessories
Model Type
Order No.
External Backup and
EBR-Module RS232
1241430000
Restore Module
19'' Rack Mounting Kit
RM-KIT
1241440000
Wall mounting kit
IE-WALLMOUNT-KIT-46MM
1504440000
Note
*ATEX-Zone 2 does not apply to the models IE-SW-VL08MT-5TX-3SC and IE-SW-VL08MT5TX-1SC-2SCS)
** does not apply to the models IE-SW-VL08MT-5TX-3SC and IE-SW-VL08MT-5TX-1SC-2SCS
2021700000
Industrial Ethernet Switches
Managed Switches Fast Ethernet – Premium Line
Managed Fast Ethernet Switches
•Supports the automation protocols Modbus/TCP, PROFINET RT and EtherNet/IP
•Plug-n-play Turbo Ring and Turbo Chain (<20 ms @ 250 switches)
•IEEE 1588 PTP, Modbus/TCP, LLDP, SNMP Inform, QoS, IGMP snooping, VLAN,
IEEE 802.1X, HTTPS, SNMPv3, and SSH supported
9.0 mm (0.4 in) IE-SW_PL08M-Series
9.0 mm (0.4 in)
IE-SW-PL16M-Series
135.0 mm (5.3 in)
135.0 mm (5.3 in)
105.0 mm (4.1 in)
Technical data
80.2 mm (3.2 in)
142.7 mm (5.6 in)
B
94.0 mm (3.7 in)
Standards
IEEE 802.3 for 10BaseT▪IEEE 802.3u for 100BaseT (X) and 100BaseFX▪IEEE 802.3x for Flow
Control▪IEEE 802.1D-2004 for Spanning Tree Protocol▪IEEE 802.1w for Rapid STP▪IEEE 802.1Q for
VLAN Tagging▪IEEE 802.1p for Class of Service▪IEEE 802.1X for Authentication▪IEEE 802.3ad for Port
Trunk with LACP
Protocols
IGMPv1/v2▪GVRP▪SNMPv1/v2c/v3▪DHCP Server/Client▪BootP▪TFTP▪SNTP▪SMTP▪RARP▪
GMRP▪LACP▪RMON▪HTTP▪HTTPS▪Telnet▪Syslog▪DHCP Option 66/67/82▪SSH▪SNMP
Inform▪Modbus/TCP▪PROFINET RT (PROFINET-IO device in compliance with Conformance
Class B)▪EtherNet/IP (CIP support)▪LLDP▪IEEE 1588 PTP▪IPv6
MIB
MIB-II▪Ethernet-Like MIB▪P-BRIDGE MIB▪Q-BRIDGE MIB▪Bridge MIB▪RSTP MIB▪
RMON MIB Group 1, 2, 3, 9 ▪Private MIB
Flow Control
IEEE 802.3x flow control▪back pressure flow control
Switch Properties
Priority Queues
4
Max. Number of Available VLANs
64
VLAN ID Range
VID 1 to 4094
IGMP Groups
256
MAC Table Size
8K
Packet Buffer Size
1 MBit (IE-SW-PL08M series), 2 MBit (IE-SW-PL16M series)
Interface
Fibre Ports
100BaseFX ports (SC/ST connector)
RJ45 Ports
10/100BaseT(X) auto negotiation speed,
Full/Half duplex mode, and auto MDI/MDI-X connection
Console Port
RS 232 (RJ45 connector)
DIP Switches
Turbo-ring, master, coupler, reserve (only IE-SW-PL08M series)
LED Indicators
PWR1, PWR2, FAULT, MSTR/HEAD,
CPLR/TAIL, 10/100M
Alarm Contact
2 relay outputs with current carrying
capacity of 1 A @ 24 V DC
Digital Inputs
2 inputs with the same ground,
electrically isolated
• +13 to +30 V for state “1”
• -30 to +3 V for state “0”
• Max. input current: 8 mA
Optical Fibre
100BaseFX
multimode
singlemode
Wavelength
1300 nm
1310 nm
Max. TX
-10 dBm
0 dBm
Min. TX
-20 dBm
-5 dBm
RX Sensitivity
-32 dBm
-34 dBm
Link Budget
12 dB
29 dB
Typical Distance
5 km (50/125 μm
multimode cable)
40 km (9/125 μm
4 km (62.5/125 μm
singlemode cable)
multimode cable)
Saturation
-6 dBm
-3 dBm
Power Requirements
Input Voltage
24 V DC (12 to 45 V DC), redundant dual inputs
Input Current
IE-SW-PL08M-8TX: 0.26 A @ 24 V
IE-SW-PL08M-6TX-2SC/ST/2SCS: 0.36 A @ 24 V
IE-SW-PL16M-16TX: 0.41 A @ 24 V
IE-SW-PL16M-14TX-2SC/ST: 0.51 A @ 24 V
2021700000
T;u\%
Power Requirements
Overload Current Protection
Connection
Reverse Polarity Protection
Physical Characteristics
Housing
Dimensions (W x H x D)
Weight
Installation
Environmental Limits
Operating Temperature
Storage Temperature
Ambient Relative Humidity
Regulatory Approvals
Safety
Hazardous Location
EMI
EMC
Present
2 removable 6-contact terminal blocks
Present
Metal, IP 30 protection
IE-SW-PL08M: 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in)
IE-SW-PL16M: 94 x 135 x 142.7 mm (3.7 x 5.31 x 5.62 in)
IE-SW-PL08M: 1040 g, IE-SW-PL16M: 1586 g
TS 35, wall mounting (with optional mounting kit)
Standard Models: 0 to 60 °C (32 to 140 °F)
Wide Temp. Models: -40 to 75 °C
(-40 to 167 °F) (on request)
-40 to 85 °C (-40 to 185 °F)
5 to 95 % (non-condensing)
UL 508, UL 60950-1, CSA C22.2 No. 60950-1, EN60950-1
UL/cUL Class I, Division 2, Groups A, B, C and D;
ATEX Zone 2 Ex nA nC IIC T4 Gc
FCC Part 15, CISPR (EN55022) class A
EN61000-4-2 (ESD): IE-SW-PL08M...Series: level 3
IE-SW-PL16M...Series: level 2;
EN61000-4-3 (RS) level 3; EN61000-4-4 (EFT) level 3;
EN61000-4-5 (Surge) level 3;
EN61000-4-6 (CS) level 3; EN61000-4-8
DNV, GL
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
Maritime
Shock
Freefall
Vibration
MTBF (mean time between failures)
Time
IE-SW-PL08M...Series: 339,000 hrs
IE-SW-PL16M...Series: 247,000 hrs
Database
Telcordia (Bellcore), GB
Warranty
Warranty Period
5 years
Ordering data
Version
8 * RJ45
6 * RJ45, 2 * SC-Multimode
6 * RJ45, 2 * ST-Multimode
6 * RJ45, 2 * SC-Singlemode
16 * RJ45
14 * RJ45, 2 * SC-Multimode
14 * RJ45, 2 * ST-Multimode
Model Type
IE-SW-PL08M-8TX
IE-SW-PL08MT-8TX
IE-SW-PL08M-6TX-2SC
IE-SW-PL08MT-6TX-2SC
IE-SW-PL08M-6TX-2ST
IE-SW-PL08MT-6TX-2ST
IE-SW-PL08M-6TX-2SCS
IE-SW-PL08MT-6TX-2SCS
IE-SW-PL16M-16TX
IE-SW-PL16MT-16TX
IE-SW-PL16M-14TX-2SC
IE-SW-PL16MT-14TX-2SC
IE-SW-PL16M-14TX-2ST
IE-SW-PL16MT-14TX-2ST
Operating
Temperature
0 to 60 °C
-40 to +75 °C
0 to 60 °C
-40 to +75 °C
0 to 60 °C
-40 to +75 °C
0 to 60 °C
-40 to +75 °C
0 to 60 °C
-40 to +75 °C
0 to 60 °C
-40 to +75 °C
0 to 60 °C
-40 to +75 °C
Order No.
1241040000
1286780000
1241070000
1286790000
1241080000
1286800000
1241090000
1286810000
1241100000
1286820000
1241120000
1286830000
1241130000
1286840000
B.15
Industrial Ethernet Switches
Managed Switches Gigabit Ethernet – Premium Line
Managed Gigabit Ethernet Switches
•Supports the automation protocols Modbus/TCP, PROFINET RT and EtherNet/IP
•2 Gigabit Ethernet ports for redundant ring and 1 Gigabit Ethernet port
for uplink solution
•Ring redundancy with fast recovery time (≤ 20 ms @ 250 switches)
•IEEE 1588 PTP, LLDP, SNMP Inform, QoS, IGMP snooping,
VLAN, IEEE 802.1X, HTTPS, SNMPv3, and SSH supported
PPLQ
PPLQ
B
T;u\%
PPLQ
Technical data
PPLQ
Standards
IEEE 802.3 for 10BaseT▪IEEE 802.3u for 100BaseT (X) and 100BaseFX▪IEEE 802.3ab for
1000BaseT(X)▪IEEE 802.3z for 1000BaseX▪IEEE 802.3x for Flow Control▪IEEE 802.1D-2004 for
Spanning Tree Protocol▪IEEE 802.1w for Rapid STP▪IEEE 802.1Q for VLAN Tagging▪IEEE 802.1p for
Class of Service▪IEEE 802.1X for Authentication▪IEEE 802.3ad for Port Trunk with LACP
Protocols
IGMPv1/v2▪GMRP▪GVRP▪SNMPv1/v2c/v3▪DHCP Server/Client▪BootP▪TFTP▪SNTP▪
SMTP▪RARP▪RMON▪HTTP▪HTTPS▪Telnet▪Syslog▪DHCP Option 66/67/82▪SSH▪SNMP
Inform▪Modbus/TCP▪PROFINET RT (PROFINET-IO device in compliance with Conformance Class
B)▪EtherNet/IP (CIP support)▪LLDP▪IEEE 1588 PTP▪IPv6
MIB
MIB-II▪Ethernet-Like MIB▪P-BRIDGE MIB▪Q-BRIDGE MIB▪Bridge MIB▪RSTP MIB▪
RMON MIB Group 1, 2, 3, 9 ▪Private MIB
Flow Control
IEEE 802.3x flow control▪back pressure flow control
Switch Properties
Priority Queues
4
Max. Number of Available VLANs
64
VLAN ID Range
VID 1 to 4094
IGMP Groups
256
MAC Table Size
8K
Packet Buffer Size
1 MBit
Interface
Fibre Ports
1000BaseSFP-Slot
(100BaseSFP modules are not supported)
RJ45 Ports
10/100BaseT(X) oder 10/100/1000BaseT(X) auto negotiation
Console Port
RS 232 (RJ45 connector)
DIP Switches
Turbo-Ring, Master, Coupler, Reserve
LED Indicators
PWR1, PWR2, FAULT, 10/100M (TP-Port), 1000M (Gigabit-Port),
MSTR/HEAD, CPLR/TAIL
Alarm Contact
2 relay outputs with current carrying capacity of 1 A @ 24 V DC
2 inputs with the same ground, but electrically isolated from the electronics
Digital Inputs
• +13 to +30 V for state “1”
• -30 to +3 V for state “0”
• Max. input current: 8 mA
Power Requirements
Input Voltage
24 V DC (12 to 45 V DC), redundant dual inputs
Input Current
IE-SW-PL10M-3GT-7TX: 0.65 A @ 24 V
IE-SW-PL10M-1GT-2GS-7TX: 0.44 A @ 24 V
Overload Current Protection
Present
Connection
2 removable 6-contact terminal blocks
Reverse Polarity Protection
Present
Physical Characteristics
Housing
Metal, IP 30 protection
Dimensions (W x H x D)
80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in)
Weight
1170 g
Installation
TS 35, wall mounting (with optional mounting kit)
Environmental Limits
Operating Temperature
Storage Temperature
Ambient Relative Humidity
Regulatory Approvals
Safety
Hazardous Location
EMI
EMC
Standard Models: 0 to 60 °C (32 to 140 °F);
Wide Temp. Models: -40 to 75 °C (-40 to 167 °F)
-40 to 85 °C (-40 to 185 °F)
5 to 95 % (non-condensing)
UL 508, UL 60950-1, CSA C22.2 No. 60950-1, EN60950-1
UL/cUL Class I, Division 2, Groups A, B, C and D;
ATEX Zone 2 Ex nA nC IIC T4 Gc
FCC Part 15, CISPR (EN55022) Class A
EN61000-4-2 (ESD),level 3; EN61000-4-3 (RS),level 3;
EN61000-4-4 (EFT),level 3; EN61000-4-5 (Surge),level 3;
EN61000-4-6 (CS),level 3; EN61000-4-8
DNV, GL
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
Maritime
Shock
Freefall
Vibration
MTBF (mean time between failures)
Time
204.000 hrs
Database
MIL-HDBK-217J, GB 25 °C
Warranty
Warranty Period
5 years
Ordering data
Version
3 * RJ45 10/100/1000BaseT(X),
7 * RJ45 10/100BaseT(X)
1 * RJ45 10/100/1000BaseT(X),
2 * Slots 1000BaseSFP,
7 * RJ45 10/100BaseT(X)
Accessories
External Backup and
Restore Module
19'' Rack Mounting Kit
Wall mounting kit
Model Type
Operating
Temperature
IE-SW-PL10M-3GT-7TX
0 to 60 °C
IE-SW-PL10MT-3GT-7TX
-40 to +75 °C
IE-SW-PL10M-1GT-2GS-7TX 0 to 60 °C
IE-SW-PL10MT-1GT-2GS-7TX -40 to +75 °C
Model Type
EBR-Modul RS232
RM-KIT
IE-WALLMOUNT-KIT-46MM
Order No.
1241290000
1286930000
1241300000
1286940000
Order No.
1241430000
1241440000
1504440000
Note
The IE-SW-PL10M 1GT-2GS-7TX supports up to 2x 1000Base SFP slots. Corresponding SFP modules for
Gigabit Ethernet, see page F.8.
B.16
2021700000
Industrial Ethernet Switches
Managed Switches Gigabit Ethernet – Premium Line
Managed Gigabit Ethernet Switches
•Supports the automation protocols Modbus/TCP, PROFINET RT and EtherNet/IP
•2 Gigabit Ethernet ports plus 16 Fast Ethernet ports for copper and fibre
•Ring redundancy with rapid recovery time (≤ 20 ms @ 250 switches)
•IEEE 1588 PTP, LLDP, SNMP Inform, QoS,
IGMP snooping, VLAN, IEEE 802.1X, HTTPS, SNMPv3, and SSH supported
PPLQ
PPLQ
PPLQ
Technical data
PPLQ
Standards
IEEE 802.3 for 10BaseT▪IEEE 802.3u for 100BaseT(X) and 100BaseFX▪IEEE 802.3ab for
1000BaseT(X)▪IEEE 802.3z for 1000BaseX IEEE 802.3x for Flow Control▪IEEE 802.1D-2004 for Spanning
Tree Protocol▪IEEE 802.1w for Rapid STP▪IEEE 802.1Q for VLAN Tagging▪IEEE 802.1p for Class of
Service▪IEEE 802.1X for Authentication▪IEEE 802.3ad for Port-Trunk mit LACP
Protocols
IGMPv1/v2▪GMRP, GVRP▪SNMPv1/v2c/v3▪DHCP Server/Client▪BootP▪TFTP▪SNTP▪
SMTP▪RARP▪RMON▪HTTP▪HTTPS▪Telnet▪Syslog▪DHCP-Option 66/67/82▪SSH▪SNMP
Inform▪Modbus/TCP▪PROFINET RT (PROFINET-IO device in compliance with Conformance Class
B)▪EtherNet/IP (CIP support)▪LLDP▪IEEE 1588 PTP▪IPv6
MIB
MIB-II▪Ethernet-like MIB▪P-BRIDGE MIB▪Q-BRIDGE MIB▪Bridge MIB▪RSTP MIB▪RMON MIB Group
1, 2, 3, 9 ▪Private MIB
Flow Control
IEEE 802.3x flow control▪back pressure flow control
Switch Properties
Priority Queues
4
Max. Number of Available VLANs
64
VLAN ID Range
VID 1 to 4094
IGMP Groups
256
MAC Table Size
8K
Packet Buffer Size
2 MBit
Interface
Fibre Ports
100BaseFX (SC/ST connection) and 1000BaseSFP slot
(100BaseSFP modules are not supported)
RJ45 Ports
10/100BaseT(X) oder 10/100/1000BaseT(X) auto negotiation
Console Port
RS 232 (RJ45 connector)
LED Indicators
PWR1, PWR2, FAULT, 10/100M (TP-Port), 100M (Glasfaser-Port),
MSTR/HEAD, CPLR/TAIL
Alarm Contact
2 relay outputs with current carrying capacity of 1 A @ 24 V DC
2 inputs with the same ground, but electrically isolated from the electronics.
Digital Inputs
• +13 to +30 V for state “1”
• -30 to +3 V for state “0”
• Max. input current: 8 mA
Optical Fibre
100BaseFX
multimode
singlemode
Wavelength
1300 nm
1310 nm
Max. TX
-10 dBm
0 dBm
Min. TX
-20 dBm
-5 dBm
RX Sensitivity
-32 dBm
-34 dBm
Link Budget
12 dB
29 dB
Typical Distance
5 km (50/125 μm
multimode cable)
40 km (9/125 μm
4 km (62.5/125 μm
singlemode cable)
multimode cable)
Saturation
-6 dBm
-3 dBm
Power Requirements
Input Voltage
Input Current
Overload Current Protection
Connection
Reverse Polarity Protection
Physical Characteristics
Housing
Dimensions (W x H x D)
Weight
Installation
Environmental Limits
Operating Temperature
Storage Temperature
Ambient Relative Humidity
Regulatory Approvals
Safety
Hazardous Location
EMC
24 V DC (12 to 45 V DC), redundant dual inputs
IE-SW-PL18M-2GC-16TX: 0.51 A @ 24 V
IE-SW-PL18M-SC/ST/SCS: 0.61 A @ 24 V
Present
2 removable 6-contact terminal blocks
Present
Metal, IP 30 protection
94 x 135 x 142.7 mm (3.7 x 5.31 x 5.62 in)
1630 g
TS 35, wall mounting (with optional mounting kit)
Standard Models: 0 to 60 °C (32 to 140 °F)
Wide Temp. Models: -40 to 75 °C (-40 to 167 °F)
-40 to 85 °C (-40 to 185 °F)
5 to 95 % (non-condensing)
UL 508, UL 60950-1, CSA C22.2 No. 60950-1, EN60950-1
UL/cUL Class I, Division 2, Groups A, B, C and D; ATEX Zone 2 Ex nA
nC IIC T4 Gc
FCC Part 15, CISPR (EN55022) Class A
EN61000-4-2 (ESD), level 2; EN61000-4-3 (RS), level 3;
EN61000-4-4 (EFT), level 2; EN61000-4-5 (Surge), level 3;
EN61000-4-6 (CS), level 3; EN61000-4-8; EN61000-4-12
DNV, GL
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
Maritime
Shock
Freefall
Vibration
MTBF (mean time between failures)
Time
240.000 hrs
Database
Telcordia (Bellcore), GB
Warranty
Warranty Period
5 years
Ordering data
Version
Model Type
Operating
Temperature
0 to +60 °C
-40 to +75 °C
0 to +60 °C
-40 to +75 °C
Order No.
IE-SW-PL18M-2GC-16TX
1241320000
16 * RJ45 10/100BaseT(X),
IE-SW-PL18MT-2GC-16TX
1286970000
2 * Combo Ports1
14 * RJ45 10/100BaseT(X),
IE-SW-PL18M-2GC14TX2SC
1241330000
2 * SC-Multimode 100BaseFX, IE-SW-PL18MT-2GC14TX2SC
1286990000
2 * Combo Ports1
14 * RJ45 10/100BaseT(X),
IE-SW-PL18M-2GC14TX2ST
0 to +60 °C
1241340000
2 * ST-Multimode 100BaseFX, IE-SW-PL18MT-2GC14TX2ST
-40 to +75 °C
1287000000
2 * Combo Ports1
IE-SW-PL18M-2GC14TX2SCS
0 to +60 °C
1241350000
14 * RJ45 10/100BaseT(X),
-40 to +75 °C
1287010000
2 * SC-Singlemode 100BaseFX, IE-SW-PL18MT-2GC14TX2SCS
2 * Combo Ports1
Note
The IE-SW-PL18M series supports up to 2x 1000Base SFP slots. Corresponding SFP modules for Gigabit
Ethernet, see page F.8.
1
2021700000
B
T;u\%
(10/100/1000BaseT(X) or 100/1000BaseSFP)
B.17
Industrial Ethernet Switches
Managed Switches Gigabit Ethernet – Premium Line
Managed Full Gigabit Ethernet Switch
•Supports the automation protocols Modbus/TCP, PROFINET RT and EtherNet/IP
•4 10/100/1000BaseT(X) ports plus 5 combo (10/100/1000BaseT(X)
or 100/1000BaseSFP slot) Gigabit ports
•Ring redundancy with rapid recovery time (≤ 20 ms @ 250 switches)
•IEEE 1588 PTP, LLDP, SNMP Inform, QoS, IGMP snooping,
VLAN, IEEE 802.1X, HTTPS, SNMPv3, and SSH supported
PPLQ
PPLQ
B
T;u\%
PPLQ
Technical data
PPLQ
Standards
IEEE 802.3 for 10BaseT▪IEEE 802.3u for 100BaseT (X) and 100BaseFX▪IEEE 802.3ab for
1000BaseT(X)▪IEEE 802.3z for 1000BaseX▪IEEE 802.3x for Flow Control▪IEEE 802.1D-2004 for
Spanning Tree Protocol▪IEEE 802.1w for Rapid STP▪IEEE 802.1Q for VLAN Tagging▪IEEE 802.1p for
Class of Service▪IEEE 802.1X for Authentication▪IEEE 802.3ad for Port Trunk with LACP
Protocols
IGMPv1/v2▪GMRP▪GVRP▪SNMPv1/v2c/v3▪DHCP Server/Client▪DHCP Option
66/67/82▪BootP▪TFTP▪SNTP▪SMTP▪RARP▪RMON▪HTTP▪HTTPS▪Telnet▪SSH▪Syslog▪M
odbus/TCP▪PROFINET RT (PROFINET-IO device in compliance with Conformance Class B)▪EtherNet/IP (CIP
support)▪SNMP Inform▪LLDP▪IEEE 1588 PTP▪IPv6
MIB
MIB-II▪Ethernet-Like MIB▪P-BRIDGE MIB▪Q-BRIDGE MIB▪Bridge MIB▪RSTP MIB▪
RMON MIB Group 1, 2, 3, 9 ▪Private MIB
Flow Control
IEEE 802.3x flow control▪back pressure flow control
Switch Properties
Priority Queues
4
Max. Number of Available VLANs
64
VLAN ID Range
ID 1 to 4094
IGMP Groups
256
MAC Table Size
8K
Packet Buffer Size
1 MBit
Interface
Fibre Ports
100/1000Base SFP Slot
RJ45 Ports
10/100/1000BaseT(X) auto negotiation
Console Port
RS 232 (RJ45 connector)
DIP Switches
Turbo-Ring, Master, Coupler, Reserve
LED Indicators
PWR1, PWR2, FAULT, 10/100/1000M, MSTR/HEAD, CPLR/TAIL
Alarm Contact
2 relay outputs with current carrying capacity of 1 A @ 24 V DC
2 inputs with the same ground, but electrically isolated from the electronics
Digital Inputs
• +13 to +30 V for state “1”
• -30 to +3 V for state “0”
• Max. input current: 8 mA
Power Requirements
Input Voltage
12/24/48 V DC, redundant dual inputs
Input Current
0.81 A @ 24 V
Overload Current Protection
Present
Connection
2 removable 6-contact terminal blocks
Reverse Polarity Protection
Present
Physical Characteristics
Housing
Metal, IP 30 protection
Dimensions (W x H x D)
87.1 × 135 × 107 mm (3.43 × 5.31 × 4.21 in)
Weight
1510 g
Installation
TS 35, wall mounting (with optional mounting kit)
Environmental Limits
Operating Temperature
Storage Temperature
Ambient Relative Humidity
Regulatory Approvals
Safety
EMI
EMC
Standard Models: 0 to 60 °C (32 to 140 °F)
Wide Temp. Models: -40 to 75 °C (-40 to 167 °F)
-40 to 85 °C (-40 to 185 °F)
5 to 95 % (non-condensing)
UL 508, EN60950-1
FCC Part 15, CISPR (EN55022) Class A
EN61000-4-2 (ESD), level 3;
EN61000-4-3 (RS), level 3;
EN61000-4-4 (EFT), level 3;
EN61000-4-5 (Surge), level 3;
EN61000-4-6 (CS), level 3;
EN61000-4-8
DNV, GL
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
Maritime
Shock
Freefall
Vibration
MTBF (mean time between failures)
Time
330.000 hrs
Database
Telcordia (Bellcore), GB
Warranty
Warranty Period
5 years
Ordering data
Version
Model Type
4 * RJ45 10/100/1000BaseT(X)
5 * Combo Ports1
IE-SW-PL09M-5GC-4GT
IE-SW-PL09MT-5GC-4GT
Accessories
External Backup and
Restore Module
19'' Rack Mounting Kit
Wall mounting kit
Operating
Temperature
0 to 60 °C
-40 to +75 °C
Order No.
1241370000
1287020000
Model Type
EBR-Modul RS232
Order No.
1241430000
RM-KIT
IE-WALLMOUNT-KIT-46MM
1241440000
1504440000
Note
The IE-SW-PL09M series supports up to 5x 100/1000Base SFP slots. Corresponding SFP modules for Fast/
Gigabit Ethernet, see page F.8.
1
B.18
(10/100/1000BaseT(X) or 100/1000BaseSFP)
2021700000
B
2021700000
B.19
Industrial Ethernet Switches
Industrial Ethernet Switches
Power over Ethernet Switches
B
Power over Ethernet switches
Power and data transferred in parallel
Power over Ethernet (PoE) describes a process where power
can be supplied to a network-compatible device over the
8-wire Ethernet cable. In a narrower sense, PoE today means
the IEEE 802.3af (DTE Power over MDI) standard which was
adopted in June 2003.
The main advantage of Power over Ethernet is that you do
not require a separate power supply cable and so can install
Ethernet devices in hard-to-reach places or in areas where
there is not sufficient room for many cables. This means
that you can save some significant installation costs, and
that you can also integrate the power supply into a central
uninterruptible power supply (UPS) to improve the reliability
of the connected devices.
B.20
PoE is used by network devices that need small amounts
of power. It is typically used for IP telephones, network
cameras, operating panels or wireless communications
devices such as WLAN access points.
Weidmüller PoE switches support the IEE 802.3at standard
(also known as PoE+) and can therefore supply end devices
with up to 30 W per PoE port.
Weidmüller PoE switches also offer further advantages by
their simple power supply needs. They do not require an
additional 48 V supply in addition to the standard 24 V
supply.
2021700000
Industrial Ethernet Switches
Unmanaged Switches Fast Ethernet - Power over Ethernet – Basic Line
Unmanaged Fast Ethernet PoE+ Switch
•4 IEEE 802.3af/at compliant PoE ports
•Up to 30 watts per PoE port
•24/48 V DC redundant wide-range power supply
•Integrated DC/DC converter can supply 48 V-PoE devices across the entire
input voltage range of 24 to 48 V DC
•Intelligent power consumption detection and classification
•Broadcast Storm Protection
PP
PP
B
3R(
PP
0
\%
0
PP
Technical data
Technology
Standards
Processing Type
Flow Control
Switch Properties
MAC table size
Packet buffer size
Interface
Fibre-optic ports
RJ45 Ports
DIP Switches
PoE pin assignment
LED Indicators
Optical Fibre
Wavelength
Max. Transmit power
Min. Transmit power
RX Sensitivity
Link Budget
Typical Distance
Saturation
Power Requirements
Input Voltage
Input Current
Overload Current Protection
Connection
Reverse Polarity Protection
Physical Characteristics
Housing
Dimensions (W x H x D)
Weight
Installation
Environmental Limits
Operating Temperature
Storage Temperature
Ambient Relative Humidity
2021700000
802.3af/at for Power over Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for Flow Control
Store and Forward
IEEE 802.3x flow control, back pressure flow control
1K
512 KB
100BaseFX ports (SC/ST connector, multimode)
10/100BaseT(X) auto negotiation speed,
Full/Half duplex mode and auto MDI/MDI-X connection
Enable/disable broadcast storm protection
V-, V-, V+, V+ for pin 1, 2, 3, 6 (endspan, MDI-X alternative A)
PWR1, PWR2, 10/100M (TP-Port), 100M (Fibre-optic port), PoE
100BaseFX
multimode
1300 nm
-10 dBm
-20 dBm
-32 dBm
12 dB
5 km (50/125 μm multimode cable)
4 km (62,5/125 μm multimode cable)
-6 dBm
24/48 (20 to 60 V) V DC, 2 redundant inputs
Max 7.5 A @ 24 V DC
(supports up to 4 ports at 30 watts per PoE port)
Present
1 removable 4-contact terminal block
Present
Aluminium, IP 30 protection
50 × 115 × 70 mm (1.96 x 4.52 x 2.76 in)
375 g
TS 35
Regulatory Approvals
Safety
EMC
UL 69050-1, UL 508
FCC Part 15 Subpart B Class A, EN 55022 Class A
EN61000-4-2 (ESD),level 3;
EN61000-4-3 (RS),level 3;
EN61000-4-4 (EFT), level 4;
EN61000-4-5 (Surge), level 4;
EN61000-4-6 (CS),level 3;
EN61000-4-8
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
Shock
Freefall
Vibration
MTBF (mean time between failures)
Time
Datenbase
Warranty
Warranty Period
Ordering data
Version
2 * RJ45 10/100 BaseT(X),
4 * RJ45 10/100 BaseT(X) PoE+
1 * RJ45 10/100 BaseT(X),
4 * RJ45 10/100 BaseT(X) PoE+,
1 * SC-Multimode
1 * RJ45 10/100 BaseT(X),
4 * RJ45 10/100 BaseT(X) PoE+,
1 * ST-Multimode
4 * RJ45 10/100 BaseT(X) PoE+,
2 * SC-Multimode
4 * RJ45 10/100 BaseT(X) PoE+,
2 * ST-Multimode
Accessories
19“ Rack Mounting Kit
Wall mounting kit
645.138 hrs
Telcordia (Bellcore), GB
5 years
Type
Operating
Temperature
IE-SW-BL06-2TX-4PoE
0 to +60 °C
IE-SW-BL06T-2TX-4PoE
-40 to +75 °C
IE-SW-BL06-1TX-4PoE-1SC 0 to +60 °C
IE-SW-BL06T-1TX-4PoE-1SC -40 to +75 °C
1241380000
1286920000
1504250000
1504260000
IE-SW-BL06-1TX-4PoE-1ST 0 to +60 °C
IE-SW-BL06T-1TX-4PoE-1ST -40 to +75 °C
1504270000
1504290000
IE-SW-BL06-4PoE-2SC
IE-SW-BL06T-4PoE-2SC
IE-SW-BL06-4PoE-2ST
IE-SW-BL06T-4PoE-2ST
1504210000
1504220000
1504230000
1504240000
Type
RM-KIT
IE-WALLMOUNT-KIT-46MM
0 to +60 °C
-40 to +75 °C
0 to +60 °C
-40 to +75 °C
Order No.
Order No.
1241440000
1504440000
Standard Models: 0 to 60 °C (32 to 140 °F)
Wide Temp. Models: -40 to 75 °C (-40 to 167 °F)
-40 to 85 °C (-40 to 185 °F)
5 to 95 % (non-condensing)
B.21
Industrial Ethernet Switches
Unmanaged Switches Gigabit Ethernet - Power over Ethernet – Basic Line
Unmanaged Gigabit Ethernet PoE+ Switches
•Full Gigabit on all ports
•IEEE 802.3af/at compliant PoE ports
•Up to 30 W per PoE+ port
•24/48 V DC redundant wide-range power supply
•Support for jumbo frames (9.6 KB)
•Intelligent power consumption detection and classification
•Intelligent PoE surge voltage and short-circuit protection
PWR1
PWR2
PoE+
4
5
2
3
10 / 100 / 1000M
135 mm
B
\%
1
105 mm
113.8 mm
29.2 mm
Technical data
Technology
Standards
Processing Type
Flow Control
Switch Properties
MAC table size
Packet buffer size
Interface
Fibre-optic ports
RJ45 Ports
DIP Switches
PoE pin assignment
LED Indicators
Power Requirements
Input Voltage
Input Current
Overload Current Protection
Connection
Reverse Polarity Protection
Physical Characteristics
Housing
Dimensions (W x H x D)
Weight
Installation
Environmental Limits
Operating Temperature
Storage Temperature
Ambient Relative Humidity
Regulatory Approvals
Safety
EMC
Shock
Freefall
Vibration
B.22
802.3af/at for Power over Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
Store and Forward
IEEE 802.3x flow control, back pressure flow control
8K
1088 KBit
1000BaseSFP-Slot
10/100/1000BaseT(X) auto negotiation speed,
Full/Half duplex mode and auto MDI/MDI-X connection
Enable/disable broadcast storm protection
Enable/disable jumbo frame support
V+, V+, V-, V- for Pin 1, 2, 3, 6 (endspan, MDI alternative A)
PWR1, PWR2, 10/100/1000M (TP-Port), 1000M (SFP-Slot), PoE
MTBF (mean time between failures)
Time
Database
Warranty
Warranty Period
1.257.910 hrs
Telcordia (Bellcore), GB
5 years
Ordering data
Version
Type
1 * RJ45 10/100/1000 BaseT(X),
4 * RJ45 10/100/1000 BaseT(X) PoE+
1 * 1000BaseSFP Slot,
4 * RJ45 10/100/1000 BaseT(X) PoE+
IE-SW-BL05-1GT-4GTPoE
IE-SW-BL05T-1GT-4GTPoE
IE-SW-BL05-1GS-4GTPoE
IE-SW-BL05T-1GS-4GTPoE
Accessories
19“ Rack Mounting Kit
Wall mounting kit
Type
RM-KIT
IE-WALLMOUNT-KIT-30MM
Operating
Temperature
0 to +60 °C
-40 to +75 °C
0 to +60 °C
-40 to +75 °C
Order No.
1504320000
1504340000
1504360000
1504380000
Order No.
1241440000
1504450000
24/48 (20 to 60 V) V DC, 2 redundant inputs
Max 7.5 A @ 24 V DC
(supports up to 4 ports at 30 watts per PoE port)
Present
2 removable 2-pin terminal blocks
Present
Aluminium, IP 30 protection
29 x 135 x 105 mm (1.14 x 5.31 x 4.13 Zoll)
360 g
TS 35
Standard Models: 0 to 60 °C (32 to 140 °F)
Wide Temp. Models: -40 to 75 °C (-40 to 167 °F)
-40 to 85 °C (-40 to 185 °F)
5 to 95 % (non-condensing)
UL 508
FCC Part 15 Subpart B Class A, EN 55022 Class A
EN61000-4-2 (ESD),level 3;
EN61000-4-3 (RS),level 3;
EN61000-4-4, level 4;
EN61000-4-5 (Surge), level 4;
EN61000-4-6 (CS),level 3;
EN61000-4-8
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
Note
The IE-SW-BL05-1GS-4GTPoE series supports up to 1x 1000Base SFP slot. Corresponding SFP modules for
Gigabit Ethernet, see page F.8.
2021700000
Industrial Ethernet Switches
Managed Switches Fast Ethernet - Power over Ethernet – Premium Line
6-port IEEE 802.3af/at PoE+ managed Ethernet Switch
•4 IEEE 802.3af/at compliant PoE ports
•Up to 30 watts per PoE port
•24/48 V DC redundant wide-range power supply
•Integrated DC/DC converter can supply 48 V-PoE devices across the entire input
voltage range of 24 to 48 V DC
•Extended PoE management functions, including PoE error checking or configuring
the operational times of connected PoE devices
,(6:3/03R(6HULHV
PPLQ
PPLQ
PPLQ
Technical data
\%
PPLQ
Standards
IEEE 802.3at/af for Power over Ethernet▪IEEE 802.3 for 10BaseT▪IEEE 802.3u for 100BaseT (X) and
100BaseFX▪IEEE 802.3x for Flow Control▪IEEE 802.1D for Spanning Tree Protocol▪IEEE 802.1w
for Rapid STP▪IEEE 802.1Q for VLAN Tagging▪IEEE 802.1p for Class of Service▪IEEE 802.1X for
Authentication▪IEEE 802.3ad for Port Trunk with LACP
Protocols
IGMPv1/v2▪GMRP▪GVRP▪SNMPv1/v2c/v3▪DHCP Server/Client▪DHCP Option 66/67/82▪
BootP▪TFTP▪SNTP▪SMTP▪RARP▪RMON▪HTTP▪HTTPS▪Telnet▪SSH▪Syslog▪
Modbus/TCP▪SNMP Inform▪LLDP▪IEEE 1588 PTP▪IPv6
MIB
MIB-II▪Ethernet-Like MIB▪P-BRIDGE MIB▪Q-BRIDGE MIB▪Bridge MIB▪RSTP MIB▪
RMON MIB Group 1, 2, 3, 9
Flow Control
IEEE 802.3x flow control▪back pressure flow control
Switch Properties
Priority Queues
4
Max. Number of Available VLANs
64
VLAN ID Range
VID 1 to 4094
IGMP Groups
256
MAC Table Size
8K
Packet Buffer Size
1 MBit
Interface
RJ45 Ports
10/100BaseT(X) auto negotiation speed, Full/Half duplex mode and
auto MDI/MDI-X connection
PoE pin assignment
V-, V-, V+, V+ for pin 1, 2, 3, 6 (endspan, MDI-X alternative A)
Console Port
RS 232 (RJ45 connector)
DIP Switches
Turbo Ring, Master, Coupler, Reserve
LED Indicators
PWR1, PWR2, FAULT, 10/100M, MSTR/HEAD, CPLR/TAIL, PoE
Alarm Contact
2 relay outputs with current carrying capacity of 1 A @ 24 V DC
Alarm Contact
2 inputs with the same ground, electrically isolated
• +13 to +30 V for state “1”
• -30 to +3 V for state “0”
• Max. input current: 8 mA
Power Requirements
Input Voltage
24/48 (20 to 60 V) V DC
Input Current
Max. 7.8 A @ 24 V DC
(supports up to 4 ports at 30 watts per PoE port)
Overload Current Protection
Present
Connection
2 removable 6-contact terminal blocks
Reverse Polarity Protection
Present
Technical data
Housing
Metal, IP 30 protection
Dimensions (W x H x D)
80 x 135 x 131.5 mm (3.15 x 5.31 x 5.18 in)
Weight
1270 g
Installation
DIN-Rail mounting
2021700000
B
Environmental Limits
Operating Temperature
Storage Temperature
Ambient Relative Humidity
Regulatory Approvals
Safety
EMI
EMC
Standard Models: 0 to 60 °C (32 to 140 °F)
Wide Operating Temp. Models:
-40 to 75 °C (-40 to 167 °F)
-40 to 85 °C (-40 to 185 °F)
5 to 95 % (non-condensing)
UL 508
FCC Part 15, CISPR (EN55022) class A
EN61000-4-2 (ESD), level 3;
EN61000-4-3 (RS), level 3;
EN61000-4-4 (EFT), level 3;
EN61000-4-5 (Surge), level 3;
EN61000-4-6 (CS), level 3;
EN61000-4-8
IEC 60068-2-27
IEC 60068-2-32
IEC 60068-2-6
Shock
Freefall
Vibration
MTBF (mean time between failures)
Time
433.000 hrs
Database
Telcordia (Bellcore), GB
Warranty
Warranty Period
5 years
Ordering data
Version
Type
2 * RJ45 10/100 BaseT(X), 4 * RJ45 IE-SW-PL06M-2TX-4PoE
10/100 BaseT(X) PoE+
IE-SW-PL06MT-2TX-4PoE
Accessories
Operating
Temperature
0 to 60 °C
-40 to +75 °C
Order No.
1241390000
1286910000
External Backup and Restore Module
Type
EBR-Modul RS232
Order No.
1241430000
19" Rack Mounting Kit
Wall mounting kit
RM-KIT
IE-WALLMOUNT-KIT-46MM
1241440000
1504440000
B.23
B
B.24
2021700000
Industrial Ethernet Switches