TO-92 Packing Options / Ordering Instructions General Description The TO-92 is an axial leaded, flat index package. The primary shipping methods are tape-and-reel, or radial ammo pack. These systems simplify the handling of the TO-92 for automated circuit board assembly systems. NOTE: Please check with your National local representative for details specific to your product needs. Bulk Packing Bulk Packing Standard Packing Option with straight leads. For lead-free option use Flow NOPB. Quantities: 1,800 units per box Example: LM2936Z-5.0 NOPB 10120508 Bulk Packing Taped Pack Option 1 Taped Pack Option 1 Flow T1, T2, T7 and T8 indicate Tape & Reel pack. For lead-free option use Flow LFT1, LFT2, LFT7 Example: or LFT8. Quantities: 2,000 units per reel LM2936Z-5.0 LFT3 10120501 LFT1 Tape &Reel Package Up, Flat Side Up 10120502 LFT7 Tape & Reel Package Up, Flat Side Down 10120509 10120510 LFT2 Tape & Reel LFT8 Tape & Reel Package Down, Flat Side Up. Package Down, Flat Side Down. Other options available on request © 2010 National Semiconductor Corporation 101205 www.national.com TO-92 Packing Options / Ordering Instructions June 23, 2010 TO-92 Packing Options / Ordering Instructions Taped Pack Option 2 Taped Pack Option 2 Flow T3 and T4 indicate Tape & Ammo box pack. For lead-free option use Flow LFT3 or LFT4. Quantities: 2,000 units per Ammo Box 10120503 Example: LM2936Z-5.0 LFT3 10120504 LFT3 Radial Ammo Pack LFT4 Radial Ammo Pack Ammo Pack equivalent to option LFT1. Flat side of Ammo Pack equivalent to option LFT7. Round side of transistor on adhesive side of tape. transistor on adhesive side of tape. Other options available on request NOTE: No straight leads available on taped product! 10120505 www.national.com 2 TO-92 Packing Options / Ordering Instructions TO-92 Tape and Reel Dimensions 10120506 Item Description Symbol Base of Package to Lead Bend Dimension (mm) b 3.00 ± 0.40 Component Height Ha 24.00 ± 0.50 Lead Clinch Height HO 16.00 ± 0.40 Component Base Height H1 19.00 ± 0.40 Component Alignment ( side/side ) Pd 0.80 max Component Alignment ( front/back ) Hd 1.00 max Component Pitch P 12.70 ± 0.60 Feed Hole Pitch PO 12.70 ± 0.20 Hole Center to First Lead P1 3.75 ± 0.30 P2 6.35 ± 0.30 Hole Center to Component Center Lead Spread F1/F2 2.60 +0.30/−0.20 Lead Thickness d 0.45 +1.00/−0.05 Taped Lead Length L1 2.50 max Taped Lead Thickness t 0.70 ± 0.20 Carrier Tape Thickness t1 0.40 ± 0.05 Carrier Tape Width W 18.50 ± 0.20 Hold - down Tape Width WO 6.00 ± 0.40 Hold - down Tape position W1 0.30 +0.20/−0.30 Feed Hole Position W2 9.00 ± 0.40 Sprocket Hole Diameter DO 4.00 ± 0.20 Lead Spring Out S 3 0.40 max www.national.com TO-92 Packing Options / Ordering Instructions 10120507 Item Description Symbol Dimensions (mm) Reel Diameter D1 360.00 ± 1.00 Arbor Hole Diameter (Standard) D2 30.50 ± 0.05 Arbor Hole Diameter (Small Hole) D2 7.00 ± 0.05 Core Diameter D3 90.00 ± 0.05 Hub Recess Inner Diameter D4 76.00 ± 0.05 Hub Recess Depth W1 10.70 ± 0.50 Flange to Flange Inner Width W2 41.00 ± 1.00 Hub to Hub Center Width W3 50.40 ± 1.70 www.national.com 4 www.national.com 5 TO-92 Packing Options / Ordering Instructions Notes TO-92 Packing Options / Ordering Instructions Notes For more National Semiconductor product information and proven design tools, visit the following Web sites at: www.national.com Products Design Support Amplifiers www.national.com/amplifiers WEBENCH® Tools www.national.com/webench Audio www.national.com/audio App Notes www.national.com/appnotes Clock and Timing www.national.com/timing Reference Designs www.national.com/refdesigns Data Converters www.national.com/adc Samples www.national.com/samples Interface www.national.com/interface Eval Boards www.national.com/evalboards LVDS www.national.com/lvds Packaging www.national.com/packaging Power Management www.national.com/power Green Compliance www.national.com/quality/green Switching Regulators www.national.com/switchers Distributors www.national.com/contacts LDOs www.national.com/ldo Quality and Reliability www.national.com/quality LED Lighting www.national.com/led Feedback/Support www.national.com/feedback Voltage References www.national.com/vref Design Made Easy www.national.com/easy www.national.com/powerwise Applications & Markets www.national.com/solutions Mil/Aero www.national.com/milaero PowerWise® Solutions Serial Digital Interface (SDI) www.national.com/sdi Temperature Sensors www.national.com/tempsensors SolarMagic™ www.national.com/solarmagic PLL/VCO www.national.com/wireless www.national.com/training PowerWise® Design University THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION (“NATIONAL”) PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS, IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT NATIONAL’S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS. EXCEPT AS PROVIDED IN NATIONAL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other brand or product names may be trademarks or registered trademarks of their respective holders. Copyright© 2010 National Semiconductor Corporation For the most current product information visit us at www.national.com National Semiconductor Americas Technical Support Center Email: [email protected] Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Technical Support Center Email: [email protected] National Semiconductor Asia Pacific Technical Support Center Email: [email protected] National Semiconductor Japan Technical Support Center Email: [email protected]