Surface Mount

Surface Mount - Tape & Reel
•
General Description
Tape-and-Reel is one of the primary methods for shipping
surface mount devices. This system simplifies the handling of
semiconductors for automated circuit board assembly systems. Tape-and-Reel holds hundreds-to-thousands of surface mount devices so that pick-and-place machines have to
be reloaded less frequently.
Features
•
•
•
•
•
•
The reel is made of polystyrene (PS) plastic material and
topically coated with antistatic solution.
The carrier tape is made of standard polycarbonate or
polystyrene materials.
The cover tape is made of polyester material.
The cover tape uses pressure sensitive or heat activated
adhesive.
Fully compliant to EIA-481 electronics industry standard
except for 128Ld and 144Ld QFP package types.
Meets European standard IEC 60286-3 PACKAGING OF
COMPONENTS FOR AUTOMATIC HANDLING PART 3:
PACKAGING OF SURFACE MOUNT COMPONENTS
ON CONTINUOUS TAPES.
Product is shipped in either 7-inch or 13-inch reels,
depending on package/product types.
NOTE: Please check with your National local representative
for details specific to your product needs.
Cover Tape Peel Strength
The force required to peel off the cover tape from the carrier
tape will fall within the range of 0.1 Newton to 1.3 Newton (10
grams to 130 grams) at a peeling speed to 300 mm per
minute. This complies with the EIA standard.
Electrostatic Charges
National Semiconductor uses only static dissipative tape-andreel materials (surface resistivity of 105 to 1012 Ω to avoid
damaging static charges building up during the peeling off of
the cover tape prior to pick and place. National Semiconductor ran extensive evaluations on cover tape materials and
found that static charge build up was very low (less than 200
volts) on static dissipative cover tapes. In comparison, commonly used insulative cover tapes had readings consistently
in excess of 3000 volts.
For All Package Types
For all Package Types
Overall Hub Length (mm)
300 minimum
740 maximum
Overall Leader Length (mm)
500 minimum
1200 maximum
20016419
FIGURE 1. Pin 1 Orientation
© 2011 National Semiconductor Corporation
200164
www.national.com
Surface Mount - Tape & Reel
June 20, 2011
Surface Mount - Tape & Reel
MINI SOIC, SOIC, SSOP, TSSOP and PSOP
20016401
20016402
Package Type
Lead Count
MKT- Outline
Drawing
Tape Size
W1 (mm)
Pocket Pitch
P(mm)
Pin 1
Quadrant
Figure 1
Units per Reel
Reel Size
A (inches)
Reel Width
W2 (mm)
12
8
Q1
VP/1000/3500
7/13
18/18.4
12
8
Q1
VP/1000/3500
7/13
18/18.4
MINI SOIC
8 Ld
10 Ld
MUA08A
MUY08A
MUB10A
MUC10A
Ordering Instruction for 1000 units/reel: no Suffix, Example: LMH6612MM
Ordering Instruction for 3500 units/reel: use Suffix ‘X’. Example: LMH6612MMX
For smaller Value Pack (VP) please contact your local NSC representative
SOIC
8 Ld (Narrow)
M08A
12
8
Q1
VP/2500
7/13
18/18.4
14 Ld (Narrow)
M14A
16
8
Q1
VP/2500
7/13
22.4
16 Ld (Narrow)
M16A
16
8
Q1
VP/2500
7/13
22.4
14 Ld (Wide)
M14B
16
12
Q1
1000
13
22.4
16 Ld (Wide)
M16B
16
12
Q1
1000
13
22.4
20 Ld (Wide)
M20B
24
12
Q1
1000
13
30.4
24 Ld (Wide)
M24B
24
12
Q1
1000
13
30.4
28 Ld (Wide)
M28B
24
12
Q1
1000
13
30.4
Note: Standard Packing Option is Rail.
Wide Ordering Instruction for 1000 units/reel: use Suffix “X”. Example: ADC0831CCWMX
Narrow Ordering Instruction for 2500 units/reel: use Suffix ‘X’. Example: LMP2231BMAX
For smaller Value Pack (VP) please contact your local NSC representative
TSSOP
14 Ld
16 Ld
20 Ld
24 Ld
28 Ld
MTC14
MXA14A
MTC16
MXA16A
MTC20
MXA20A
MTC24
MTC28
MXA28A
12
8
Q1
VP/2500
7/13
18/18.4
12
8
Q1
VP/2500
7/13
18/18.4
16
8
Q1
VP/2500
7/13
22.4
16
8
Q1
VP/2500
7/13
22.4
16
8
Q1
VP/2500
7/13
22.4
48 Ld
MTD48
24
12
Q1
1000
13
30.4
56 Ld
MTD56
24
12
Q1
1000
13
30.4
64 Ld
MXD64A
24
12
Q1
1000
13
30.4
www.national.com
2
MKT- Outline
Drawing
Tape Size
W1 (mm)
Pin 1
Quadrant
Figure 1
Pocket Pitch
P(mm)
Units per Reel
Reel Size
A (inches)
Reel Width
W2 (mm)
Note: Standard Packing Option is Rail.
Ordering Instruction for 1000 units/reel: use Suffix “X”. Example: LM8207MTX
Ordering Instruction for 2500 units/reel: use Suffix ‘X’. Example: LMP2234BMTX
For smaller Value Pack (VP) please contact your local NSC representative
10 Ld
MXF10A
12
8
Q1
VP/
1000/35000
7/13
18/18.4
Ordering Instruction for 1000 units/reel: no Suffix, Example: LM4990MH
Ordering Instruction for 3500 units/reel: use Suffix “X”. Example: LM4990MHX
For smaller Value Pack (VP) please contact your local NSC representative
SSOP-JEDEC
16 Ld
MQA16
16
8
Q1
2500
13
22.4
24 Ld
MQA24
16
8
Q1
2500
13
22.4
48 Ld
MS48A
32
16
Q1
1000
13
38.4
Note: Standard Packing Option is Rail.
For Tape & Reel Packing use Suffix 'X'. Example: LM82CIMQAX
SSOP-EIAJ
20 Ld
MSA20
16
12
Q1
2000
13
22.4
24 Ld
MSA24
16
12
Q1
2000
13
22.4
28 Ld
MSA28
16
12
Q1
2000
13
22.4
7/13
18/18.4
Note: Standard Packing Option is Rail.
For Tape & Reel Packing use Suffix 'X'. Example: DSP92LV1212AMSAX
PSOP
8 Ld
MRA08A
MRA08B
12
8
Q1
VP/2500
Note: Standard Packing Option is Rail.
Ordering Instruction for 2500 units/reel: use Suffix ‘X’. Example: LP2998MRX
Ordering Instruction for 250 units/reel: use Suffix ‘E’. Example: LP2998MRE
For smaller Value Pack (VP) please contact your local NSC representative
3
www.national.com
Surface Mount - Tape & Reel
Package Type
Lead Count
Surface Mount - Tape & Reel
PLCC
20016403
20016402
MKT- Outline
Drawing
Tape Size
W1 (mm)
Pocket Pitch
P(mm)
Pin 1
Quadrant
Figure 1
Units per Reel
Reel Size
A (inches)
Reel Width
W2 (mm)
20 Ld
V20A
16
12
Q1/Q2
1000
13
22.4
28 Ld
V28A
24
16
Q1/Q2
750
13
30.4
44 Ld
V44A
32
24
Q1/Q2
500
13
38.4
68 Ld
V68A
44
32
Q1/Q2
250
13
50.4
84 Ld
V84A
44
36
Q1/Q2
250
13
50.4
Package Type
Lead Count
PLCC
Standard Packing Option is Rail.
For Tape & Reel Packing please contact your local NSC representative.
www.national.com
4
Surface Mount - Tape & Reel
PQFP, LQFP and TQFP
20016404
20016402
Package Type
Lead Count
MKT- Outline
Drawing
Tape Size
W1 (mm)
Pocket Pitch
P(mm)
Pin 1
Quadrant
Figure 1
Units per Reel
Reel Size
A (inches)
Reel Width
W2 (mm)
VJE80A
32
24
Q2
500
13
38.4
PQFP
80 Ld
Standard Packing Option is Tray.
For Tape & Reel Packing please contact your local NSC representative.
LQFP
32 Ld
44 Ld
48 Ld
VBE32A
16
12
Q2
1000
13
22.4
VEJ44A
24
16
Q2
1000
13
30.4
16
12
Q2
1000
13
22.4
VBH48A
VXH48A
64 Ld
VEH64A
24
16
Q2
1000
13
30.4
80 Ld
VHG80A
24
16
Q2
1000
13
30.4
100 Ld
VJG100A
32
24
Q2
1000
13
38.4
128 Ld
VLB128A
44
24
Q1
500
13
50.4
144 Ld
VNG144A
44
32
Q1
500
13
50.4
144 Ld
VNG144C
44
32
Q2
500
13
50.4
Note: Standard Packing Option is Tray.
For Tape & Reel Packing use Suffix ‘X’. Example: ADC12040CIVYX
TQFP
48 Ld
VBC48A
16
12
Q2
1000
13
22.4
64 Ld
VEC64A
24
16
Q2
1000
13
30.4
80 Ld
VHB80A
24
20
Q2
1000
13
30.4
100 Ld
VJD100A
32
24
Q2
1000
13
38.4
Note: Standard Packing Option is Tray.
For Tape & Reel Packing use Suffix ‘X’. Example: DS90CF388VJDX
Note 1: Exposed Heatsink
5
www.national.com
Surface Mount - Tape & Reel
TO-263, TO-263 THIN, TO-PMOD and TO-252
TO-263, TO-263 THIN, TO-PMOD
20016406
20016402
TO-252
20016408
MKT- Outline
Drawing
Tape Size
W1 (mm)
Pocket Pitch
P(mm)
Pin 1
Quadrant
Figure 1
Units per Reel
Reel Size
A (inches)
Reel Width
W2 (mm)
3 Ld
TS3B
24
16
Q2
500
13
30.4
5 Ld
TS5B
24
16
Q2
500
13
30.4
7 Ld
TS7B
24
16
Q2
500
13
30.4
9 Ld
TS9A
24
16
Q2
500
13
30.4
13
30.4
Package Type
Lead Count
TO-263
Note: Standard Packing Option is Rail.
For Tape & Reel Packing use Suffix 'X'. Example: LP2954AISX
TO-263 THIN
3 Ld
TJ3A
24
12
Q2
1000
5 Ld
TJ5A
24
12
Q2
1000
13
30.4
7 Ld
TJ7A
24
12
Q2
VP/1000
7/13
30.4
9 Ld
TJ9A
24
12
Q2
1000
13
30.4
13
22.4
13
30.4
Ordering Instruction for 1000 units/reel: no Suffix, Example: LM22670TJ-5.0
For smaller Value Pack (VP) please contact your local NSC representative
TO-252
3 Ld
TD03B
16
8
Q2
2500
Note: Standard Packing Option is Rail.
For Tape & Reel Packing use Suffix 'X'. Example: LM1117DTX-ADJ
TO-PMOD
7 Ld
TZA07A
24
16
Q2
250/500
Ordering Instruction for 250 units/reel: no Suffix, Example: LMZ10504TZ-ADJ
Ordering Instruction for 500 units/reel: use Suffix “X”. Example: LMZ10504TZX-ADJ
11 Ld
TZA11A
32
20
Q2
250
Ordering Instruction for 250 units/reel: use Suffix “E”, Example: LMZ12008TZE
www.national.com
6
13
39.2
Surface Mount - Tape & Reel
SOT–23, SOT–223, SC-70 and TSOT
SOT–23, SC-70 and TSOT
20016417
20016402
SOT–223
20016418
MKT- Outline
Drawing
Tape Size
W1 (mm)
Pocket Pitch
P(mm)
Pin 1
Quadrant
Figure 1
3 Ld
MF03A
8
4
5 Ld
MF05A
8
4
6 Ld
MF06A
8
8 Ld
MF08A
8
Package Type
Lead Count
Units per Reel
Reel Size
A (inches)
Reel Width
W2 (mm)
Q3
1000/3000
7
14.4
Q3
VP/1000/3000
7
14.4
4
Q3
VP/1000/3000
7
14.4
4
Q3
1000/3500
7/13
18/18.4
SOT–23
Ordering Instruction for 1000 units/reel: no Suffix “X”. Example: DS90LV011AQMF
Ordering Instruction for 3000 units/reel: use Suffix “X”. Example: DS90LV011AQMFX
For smaller Value Pack (VP) please contact your local NSC representative
SC–70
5 Ld
MAA05A
8
4
Q3
VP/1000/3000
7
14.4
6 Ld
MAA06A
8
4
Q3
1000/3000
7
14.4
Ordering Instruction for 1000 units/reel: no Suffix “X”. Example: LMV851MG
Ordering Instruction for 3000 units/reel: use Suffix “X”. Example: LMV851MGX
For smaller Value Pack (VP) please contact your local NSC representative
SOT–223
4 Ld
MP04A
16
12
Q3
1000/2000
13
22.4
5 Ld
MP05A
16
12
Q3
1000/2000
13
22.4
7
14.4
Ordering Instruction for 1000 units/reel: no Suffix 'X'. Example: LM317AEMP
For 2000 units/reel use Suffix 'X'. Example: LM317AEMPX
TSOT
6 Ld
MK06A
8
4
Q3
VP/1000/3000
Ordering Instruction for 1000 units/reel: no Suffix “X”. Example: LM2734XQMK
Ordering Instruction for 3000 units/reel: use Suffix “X”. Example: LM2734XQMKE
For smaller Value Pack (VP) please contact your local NSC representative
7
www.national.com
Surface Mount - Tape & Reel
Micro SMD, Micro SMDxt, Micro Array and POS
20016414
20016402
Package on Substrate (POS)
20016420
Package Type MKT- Outline
Lead Count
Drawing
Tape Size
W1 (mm)
Pocket Pitch
P(mm)
Pin 1
Quadrant
Figure 1
Units per Reel
Reel Size
A (inches)
Reel Width
W2 (mm)
8
4
Q1
250/3000
7
14.4
7
18
Micro SMD
All Micro SMD
≤36 bumps
Ordering Instruction for 250 units/reel: No Suffix ‘X’. Example: LM3206TL
For 3000 units/reel use Suffix ‘X’. Example: LM3206TLX
Micro SMDxt
All Micro SMDxt
12
8
Q1
250/1000
Ordering Instruction for 250 units/reel: No Suffix ‘X’. Example: LM4934RL
For 1000 units/reel use Suffix ‘X’. Example: LM4934RLX
Micro Array
25 bumps
GRA25A
12
8
Q1
VP/
1000/35000
7/13
18/18.4
36 bumps
GRA36A
12
8
Q1
1000/3500
7/13
18/18.4
49 bumps
GRA49A
12
8
Q1
1000/3500
7/13
18/18.4
7/13
18/18.4
Ordering Instruction for 1000 units/reel: no Suffix “X”. Example: LMH0307GR
Ordering Instruction for 3000 units/reel: use Suffix “X”. Example: LMH0307GRX
For smaller Value Pack (VP) please contact your local NSC representative
Package on Substrate (POS)
8 Ld
SE08A
12
8
Q1
250/3000
Ordering Instruction for 250 units/reel: use Suffix “E”. Example: LM3218SEE
Ordering Instruction for 3000 units/reel: use Suffix “X”. Example: LM3218SEX
www.national.com
8
Surface Mount - Tape & Reel
FBGA, TFBGA, UFBGA, LBGA and LTCC
20016415
20016402
MKT- Outline
Drawing
Tape Size
W1 (mm)
Pocket Pitch
P(mm)
Pin 1
Quadrant
Figure 1
Units per Reel
Reel Size
A (inches)
Reel Width
W2 (mm)
49 Bumps
SLC49A
16
12
Q1
2000
13
22.4
64 Bumps
SLC64A
16
12
Q1
2000
13
22.4
81 Bumps
SLC81A
16
12
Q1
2000
13
22.4
100 Bumps
SLC100A
24
16
Q1
1000
13
30.4
13
22.4
7/13
18/18.4
13
30.4
13
38.4
Package Type
Lead Count
FBGA
Standard Packing Option is Tray.
For Tape & Reel Packing use Suffix ‘X’. Example: SCANSTA111SMX
TFBGA
60 Bumps
SLF60A
16
8
Q2
2500
Standard Packing Option is Tray.
For Tape & Reel Packing use Suffix ‘X’. Example: LMX9830SMX
UFBGA
49 Bumps
SLH49A
12
8
Q1
1000/4500
Ordering Instruction for 1000 units/reel: No Suffix ‘X’. Example: LM2502SM
For 4500 units/reel use Suffix ‘X’. Example: LM2502SMX
LBGA
196 Bumps
UJB196A
24
20
Q1
1000
Standard Packing Option is Tray.
For Tape & Reel Packing use Suffix ‘X’. Example: SCAN926260TUFX
LTCC
70 Bumps
SB70A
32
16
Q1
1000
Standard Packing Option is Tray.
For Tape & Reel Packing use Suffix ‘X’. Example: LMX9838SBX
9
www.national.com
Surface Mount - Tape & Reel
Laminated CSP, Laminate TCSP and LLP
20016416
20016402
Package Type
Lead Count
(Lead Pitch)
MKT- Outline
Drawing
Tape Size
W1 (mm)
Pocket Pitch
P(mm)
Pin 1
Quadrant
Figure 1
Units per Reel
Reel Size
A (inches)
Reel Width
W2 (mm)
16 Ld
SLB16A
12
8
Q1
2500
13
18.4
24 Ld
SLB24A
12
8
Q1
2500
13
18.4
28 Ld
SLB28A
12
8
Q1
250/2500
7/13
18/18.4
48 Ld
SLB48A
16
12
Q1
250/2500
7/13
22.4
Laminate CSP
Standard Packing Option is Tape & Reel with Suffix ‘X’.
Example: LMV2401SLBX
Laminate TCSP
20 Ld
SLE20A
12
8
Q1
2500
13
18.4
24 Ld
SLD24A
12
8
Q1
2500
13
18.4
32 Ld
SLD32A
12
8
Q1
1000/2500
7/13
18/18.4
SLE24A
Ordering Instruction for smaller quantities: no Suffix ‘X’. Example: LP3936SL
For larger quantities use Suffix ‘X’. Example: LP3936SLX
Pullback LLP-Dual
LDB06A
6 Ld
LDE06A
LDC06D
12
8
Q1
VP/1000/4500
7/13
18/18.4
12
8
Q1
VP/1000/4500
7/13
18/18.4
12
8
Q1
VP/1000/4500
7/13
18/18.4
12
8
Q1
VP/1000/4500
7/13
18/18.4
12
8
Q1
VP/1000/4500
7/13
18/18.4
LEB06A
LDA08A
LDC08A
8 Ld
LDA08B
LDA08C
YDA08A
10 Ld
14 Ld
16 Ld
LDA10A
LDA10B
LDA14A
LEE14A
LDA16A
Ordering Instruction for 1000 units/reel: no Suffix “X”. Example: LMH6554LE
Ordering Instruction for 4500 units/reel: use Suffix “X”. Example: LMH6554LEX
For smaller Value Pack (VP) please contact your local NSC representative
Pullback LLP-Quad
8 Ld
LQB08A
12
8
Q1
VP/1000/4500
7/13
18/18.4
16 Ld
LQA16A
12
8
Q1
VP/1000/4500
7/13
18/18.4
www.national.com
10
MKT- Outline
Drawing
Tape Size
W1 (mm)
Pocket Pitch
P(mm)
Pin 1
Quadrant
Figure 1
Units per Reel
Reel Size
A (inches)
Reel Width
W2 (mm)
20 Ld
LQA20A
12
8
Q1
VP/1000/4500
7/13
18/18.4
12
8
Q1
VP/1000/4500
7/13
18/18.4
24 Ld
LQA24A
YQA24A
28 Ld
LQA28A
12
8
Q1
VP/1000/4500
7/13
18/18.4
32 Ld
LQA32A
16
12
Q1
250/2500
7/13
22.4
36 Ld
LQA36A
16
12
Q1
250/2500
7/13
22.4
44 Ld
LQA44A
16
12
Q1
250/2500
7/13
22.4
13
22.4
Ordering Instruction for smaller quantities: no Suffix ‘X’. Example: LM2647LQ
For larger quantities use Suffix ‘X’. Example: LM2647LQX
For smaller Value Pack (VP) please contact your local NSC representative
56 Ld
LQA56A
16
12
Q1
2000
Standard Packing Option is Tray.
For Tape & Reel Packing please contact your local NSC representative.
No Pullback LLP
LCA06B
6 Ld
SDB06A
12
8
Q1
VP/1000/4500
7/13
18/18.4
12
8
Q1
VP/1000/4500
7/13
18/18.4
12
8
Q1
VP/1000/4500
7/13
18/18.4
12
8
Q1
VP/1000/4500
7/13
18/18.4
12
8
Q1
VP/1000/4500
7/13
18/18.4
16
12
Q1
250/2500
7/13
22.4
12
8
Q1
VP/1000/4500
7/13
18/18.4
12
8
Q1
VP/1000/4500
7/13
18/18.4
12
8
Q1
VP/1000/4500
7/13
18/18.4
12
8
Q1
VP/1000/4500
7/13
18/18.4
18/18.4
SDE06A
SDA08A
SDA08B
8 Ld
SDA08C
SDC08A
SDC08B
10 Ld
12 Ld
14 Ld
14 Ld
SDA10A
SDC10A
SDF12A
SDA14A
SDA14B
SRC14A
SDA16A
16 Ld
SDA16B
SQA16A
SQB16A
20 Ld
SPF20A
SQA24A
24 Ld
SQA24B
SQA24C
28 Ld
SPA28A
SQA28A
32 Ld
SQA32A
12
8
Q1
VP/1000/4500
7/13
36 Ld
SQA36A
16
12
Q1
250/2500
7/13
22.4
SQF40A
12
8
Q1
1000/4500
7/13
18/18.4
40 Ld
SNA40A
16
12
Q1
250/2500
7/13
22.4
SQA40A
16
12
Q1
250/2500
7/13
22.4
SQA40B
16
12
Q1
250/2500
7/13
22.4
16
12
Q1
250/2500
7/13
22.4
16
12
Q1
VP/1000/2500
7/13
14.4/22.4
SPA48A
48 Ld
SQA48A
SQA48D
SQF48A
60 Ld
SQA60A
11
www.national.com
Surface Mount - Tape & Reel
Package Type
Lead Count
(Lead Pitch)
Surface Mount - Tape & Reel
Package Type
Lead Count
(Lead Pitch)
MKT- Outline
Drawing
Tape Size
W1 (mm)
Pocket Pitch
P(mm)
Pin 1
Quadrant
Figure 1
Units per Reel
Reel Size
A (inches)
Reel Width
W2 (mm)
64 Ld
SQA64A
16
12
Q1
250/2500
7/13
22.4
Ordering Instruction for smaller quantities: no Suffix ‘X’. Example: LM71CISD
For larger quantities use Suffix ‘X’. Example: LM71CISDX
For smaller Value Pack (VP) please contact your local NSC representative
www.national.com
12
Surface Mount - Tape & Reel
www.national.com
13
Surface Mount - Tape & Reel
Notes
For more National Semiconductor product information and proven design tools, visit the following Web sites at:
www.national.com
Products
Design Support
Amplifiers
www.national.com/amplifiers
WEBENCH® Tools
www.national.com/webench
Audio
www.national.com/audio
App Notes
www.national.com/appnotes
Clock and Timing
www.national.com/timing
Reference Designs
www.national.com/refdesigns
Data Converters
www.national.com/adc
Samples
www.national.com/samples
Interface
www.national.com/interface
Eval Boards
www.national.com/evalboards
LVDS
www.national.com/lvds
Packaging
www.national.com/packaging
Power Management
www.national.com/power
Green Compliance
www.national.com/quality/green
Switching Regulators
www.national.com/switchers
Distributors
www.national.com/contacts
LDOs
www.national.com/ldo
Quality and Reliability
www.national.com/quality
LED Lighting
www.national.com/led
Feedback/Support
www.national.com/feedback
Voltage References
www.national.com/vref
Design Made Easy
www.national.com/easy
www.national.com/powerwise
Applications & Markets
www.national.com/solutions
Mil/Aero
www.national.com/milaero
PowerWise® Solutions
Serial Digital Interface (SDI) www.national.com/sdi
Temperature Sensors
www.national.com/tempsensors SolarMagic™
www.national.com/solarmagic
PLL/VCO
www.national.com/wireless
www.national.com/training
PowerWise® Design
University
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION
(“NATIONAL”) PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY
OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO
SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS,
IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS
DOCUMENT.
TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT
NATIONAL’S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL
PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR
APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND
APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE
NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS.
EXCEPT AS PROVIDED IN NATIONAL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO
LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE
AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR
PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY
RIGHT.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and
whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected
to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform
can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness.
National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other
brand or product names may be trademarks or registered trademarks of their respective holders.
Copyright© 2011 National Semiconductor Corporation
For the most current product information visit us at www.national.com
National Semiconductor
Americas Technical
Support Center
Email: [email protected]
Tel: 1-800-272-9959
www.national.com
National Semiconductor Europe
Technical Support Center
Email: [email protected]
National Semiconductor Asia
Pacific Technical Support Center
Email: [email protected]
National Semiconductor Japan
Technical Support Center
Email: [email protected]