SPVQ6 Water-proof Type Compact type with body size of 13.3×5.3×7mm Detector ■ Typical Specifications Items Specifications Slide Rating（max.）（ / min.） （Resistive load） 0.1A 12V DC / 50BA 5V DC Contact resistance （Initial / After operating life） 500mΩ max. / 1Ω max. Push type Actuator type 1±0.5N 3N max. Push Operating force Without load 300,000cycles Rotary Operating life With load 300,000cycles（0.1A 12V DC） Power Product Line Poles Positions Change over timing Operating part shape Terminal type Main body form Dual-in-line Package Type 2 Japan Export Boss - right side Push 1 Minimum order Unit (pcs.) Non shorting Boss - left side For PC board Boss - right side Actuator 1,500 6,000 Boss - left side Product No. Drawing No. SPVQ640100 1 SPVQ640200 2 SPVQ630100 3 SPVQ630200 4 Note This unit cannot be used in water (IP67 rating, except for terminal). Generalpurpose Type Packing Specifications Tray Number of packages（pcs.） Water-proof Type 1 case /Japan 1 case /export packing Export package measurements （mm） 1,500 6,000 540×360×270 Dimensions Unit:mm No. Style Total travel position Terminal No.1-2 Operating position Terminal No.1-3 Operating position 2.6 3 6.5 2.6 3 0.5 6.5 Free position Ø2 .2 4.8 7.3 1 6.8 1.5 Terminal No.1 Terminal No.2 56 5.08 8 13.3 5.08 0.4 3-0.6 Terminal No.3 5.3 Refer to P.71 for soldering conditions. SPVQ6／Water-proof Type Unit:mm No. Style Slide Total travel position 1.5 Free position 3 6.5 0.5 Push .2 4.8 6.5 6.8 7.3 ø2 Terminal No.1-3 Operating position 2.6 Terminal No.1-2 Operating position 2 Detector Dimensions 3 2.6 Terminal No.1 Terminal No.3 0.4 Terminal No.2 5.08 5.08 13.3 Rotary 8 3-0.6 5.3 Power Dual-in-line Package Type Total travel position Terminal No.1-2 Operating position Terminal No.1-3 Operating position (1.8 ) 12.3 3 0.5 2.6 Terminal No.1 5.08 Terminal No.2 8 5.08 5.3 Terminal No.3 Water-proof Type 13.3 0.4 3-0.6 Generalpurpose Type 6.5 3 Ø2 .2 Free position 1.5 (0.5) 2.6 4.95 7.4 3 7.1 8.8 max. 0.18 3.8 Total travel position 0.18 Terminal No. 1-2 Operating position Free position 2.6 8 5.08 5.08 13.3 Terminal No.1 Terminal No.2 2.6 (0.5) ø2. 2 3-0.6 Terminal No.3 3.8 1.5 4.95 7.1 7.4 8.8 max. (1.8) 12.3 3 6.5 0.5 3 4 Terminal No.1-3 Operating position 0.4 5.3 Circuit Diagram 3 1 2 57 Detector Switches List of Varieties Water-proof Type Detector Series SPVQ1 SPVQ3 SPVQ4H SPVQ6 SPVQ7 One-way Two-way Two-way Slide Photo One-way Two-way Operation type Push W Dimensions （mm） 13.3 D H Two-way Rotary 19 13.3 14.7 6 5.3 5.4 8.35 11.9 7 6.7 ● ● 1/2 1/1 1/2 5.8 8 Operating temperature range Automotive use Power 13 −40℃ to ＋85℃ ● ● ● Life cycle (availability) 1/1 1/2 Dual-in-line Package Type Poles / Positions 1/2 Rating（max.） （Resistive load） 0.1A 12V DC 0.1A 12V DC or 0.3A 16V DC Rating（min.） （Resistive load） 50μA 3V DC 50μA 5V DC or 1mA 5V DC Operating life without load 300,000cycles 1Ω max. 300,000cycles or 1,200,000cycles 1Ω max. 300,000cycles 1Ω max. Operating life with load Rating（max.） （Resistive load） 300,000cycles 1Ω max. 300,000cycles or 1,200,000cycles 1Ω max. 300,000cycles 1Ω max. Durability Generalpurpose Type Water-proof Type Electrical performance Mechanical performance Environmental performance 0.1A 12V DC 1mA 5V DC Initial contact resistance 500mΩ max. Insulation resistance 100MΩ min. 500V DC Voltage proof 500V AC for 1minute Terminal strength 3N for 1minute (with terminal) Wire strength 30N for 1minute (with wire） 50μA 5V DC Wire strengh 30N for1 minute Actuator strength 20N Cold −40℃ 500h Dry heat 85℃ 500h Damp heat 60℃, 90 to 95% RH 500h 3N for 1minute Operation force 2N max. 5.9N max. 1±0.5N 3N max. 3N max. 1±0.5N 3N max. 1±0.5N Page 46 50 55 56 58 Detector Switches Soldering Conditions・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 71 Detector Switches Cautions・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 72 Note ● Indicates applicability to all products in the series. 14 Detector Switches Soldering Conditions 1. 2. 3. Heating method: Double heating method with infrared heater. Temperature measurement: Thermocouple φ0.1 to 0.2 CA（K）or CC（T）at soldering portion（copper foil surface）. A heat resisting tape should be used for fixed measurement. Temperature profile Detector Example of Reflow Soldering Condition Slide A max. B 200 Push D E 100 Rotary Temperature (˚C ) 300 Room temperature Time (s) A（℃）3s max. SPPB SPPW8 B（℃） C C（s） D（℃） E（℃） F（s） 180 150 120 40 250 Dual-in-line Package Type Series（Reflow type） Power Pre-heating F max. 35 SPVE SPVL SPVN SPVR 40 260 Water-proof Type SPVS 230 Generalpurpose Type SPVM SPVT SSCM SSCQ SPVQC 250 Notes 1. The condition mentioned above is the temperature on the mounting surface of a PC board. There are cases where the PC board's temperature greatly differs from that of the switch, surface depending on the PC board's material, size, thickness, etc. The above-stated conditions shall also apply to switch surface temperatures. 2. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. Reference for Hand Soldering Series Soldering temperature Reference for Dip Soldering Soldering time (For PC board terminal types) Items Series SPVS, SPVN, SPVT, SPVM, SPVR, SPVE, SPPW8,SSCQ, SSCM, SPVL, SSCT, SPVQC 350±5℃ SPVQ1, SPVQ3, SPVQ6, SPVQ7, SPVQ8, SPVQ9, SSCN, SPVQA 300±10℃ 3 +1 / 0s SPPB（Reflow） 300±5℃ 5s max. SSCF, SPPB（For Lead, Dip） 350±10℃ 3 +1 / 0s 3s max. Preheating temperature Preheating time Dip soldering Soldering temperature SSCT, SPVQ1, SPVQ3, SPVQ6, SPVQ7, SPVQ8, 100±10℃ 60s max. 260±5℃ SPVQ9, SPVQA SPPW8, SPPB SSCF 100 ℃ max. 60s max. 255±5℃ ー 260±5℃ Duration of immersion 5±1s 5±1s 5±1s 71