SB5150

CYStech Electronics Corp.
Spec. No. : C186LD
Issued Date : 2013.03.18
Revised Date : 2014.12.03
Page No. : 1/3
5.0Amp Schottky Barrier Rectifiers
Reverse Voltage 150V
Forward Current 5A
SB5150
Features
Outline
 Guard ring for over voltage protection.
 Plastic package has UL flammability classification 94V-0
 Low power loss, high efficiency
 For use in low voltage, high frequency inverters, free wheeling,
and polarity protection applications
DO-201AD
Mechanical Data
 Case : JEDEC DO-201AD molded plastic body
 Epoxy : UL94V-0 rate flame retardant
 Terminals: Plated axial leads, solderable per MIL-STD-750 method
2026. High temperature soldering guaranteed: 250°C/10seconds, 0.375”(9.5mm) lead length, 5lbs(2.3kg)
tension
 Polarity: Color band denotes cathode end.
 Mounting Position : Any.
 Weight: 0.041 oz., 1.15 gram
Maximum Ratings and Electrical Characteristics
(Rating at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%)
Parameter
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
1
Maximum instantaneous forward voltage at 5A
Maximum average forward rectified current @ 0.375”(9.5mm)
lead length (see Fig 1)
Peak forward surge current @8.3ms single half sine wave
superimposed on rated load (JEDEC method) at rated TL
TA=25°C
Maximum DC reverse current at
1
rated DC blocking voltage
TA=100°C
Typical thermal resistance
VRRM
VRMS
VDC
VF
Type
SB5150
150
105
150
0.92
IF(AV)
5
A
IFSM
125
A
Symbol
2
Operating junction temperature range
Storage temperature range
IR
0.1
5
Units
V
V
V
V
mA
RJL
10
℃/W
TJ
TSTG
-55 ~ +175
-55 ~ +175
℃
℃
Note: 1.Pulse test: pulse width≤300μs, duty cycle≤1%
2.Thermal resistance, junction to lead, vertical PCB mounted, 0.375”(9.5mm) lead length
SB5150
CYStek Product Specification
CYStech Electronics Corp.
Spec. No. : C186LD
Issued Date : 2013.03.18
Revised Date : 2014.12.03
Page No. : 2/3
Characteristic Curves
SB5150
CYStek Product Specification
CYStech Electronics Corp.
Spec. No. : C186LD
Issued Date : 2013.03.18
Revised Date : 2014.12.03
Page No. : 3/3
DO-201AD Dimension
DO-201AD Molded Plastic Package
CYStek Package Code: LD
Inches
Min.
Max.
0.048 0.052
1.000
0.285
0.375
DIM
A
B
C
Millimeters
Min.
Max.
1.20
1.30
25.40
7.20
9.50
DIM
D
E
Inches
Min.
Max.
1.000
0.190 0.220
Millimeters
Min.
Max.
25.40
4.80
5.60
Notes : 1.Controlling dimension : millimeters.
2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material.
3.If there is any question with packing specification or packing method, please contact your local CYStek sales office.
Material :
 Lead : Axial leads, solderable per MIL-STD-750, Method 2026 guaranteed.
 Mold Compound : Epoxy resin family, flammability solid burning class: UL94V-0
Important Notice:
 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek.
 CYStek reserves the right to make changes to its products without notice.
 CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems.
 CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
SB5150
CYStek Product Specification