ECA5 5W U l t r a m i n i a tu r e E nc aps ul at ed S w i t c hi n g Po we r Su p p lie s series Universal 90-264VAC Input High Efficiency Improved EMI Performance 4242VDC Isolation Single , Dual and Triple Outputs Full Safety Approvals Model Number Output Voltage Output Amps FL Ripple/Noise Efficiency typ at nom. Input 1.25A 1A 0.55A 0.42A 0.33A 0.27A 0.23A 150mV pk-pk 150mV pk-pk 150mV pk-pk 150mV pk-pk 150mV pk-pk 150mV pk-pk 150mV pk-pk 65% 67% 70% 70% 72% 70% 72% SINGLE OUTPUT - Chassis Mount ESCC-5000 3.3 VDC ESCC-5001 5 VDC ESCC-5022 9 VDC ESCC-5002 12 VDC ESCC-5003 15VDC ESCC-5018 18 VDC ESCC-5005 24VDC 1.25A 1A 0.55A 0.42A 0.33A 0.27A 0.23A 150mV 150mV 150mV 150mV 150mV 150mV 150mV pk-pk pk-pk pk-pk pk-pk pk-pk pk-pk pk-pk 65% 67% 70% 70% 72% 70% 72% SINGLE OUTPUT - DIN Rail Mount ESCC-5000/DRL 3.3 VDC ESCC-5001/DRL 5 VDC ESCC-5022/DRL 9 VDC ESCC-5002/DRL 12 VDC ESCC-5003/DRL 15VDC ESCC-5018/DRL 18 VDC ESCC-5005/DRL 24VDC 1.25A 1A 0.55A 0.42A 0.33A 0.27A 0.23A 150mV 150mV 150mV 150mV 150mV 150mV 150mV pk-pk pk-pk pk-pk pk-pk pk-pk pk-pk pk-pk 66% 67% 70% 70% 72% 70% 72% SINGLE OUTPUT - PCB Mount ESCA-5000 ESCA-5001 ESCA-5022 ESCA-5002 ESCA-5003 ESCA-5018 ESCA-5005 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC 18 VDC 24VDC WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ECA5 5W U l t r a m i n i a tu r e E nc aps ul at ed S w i t c hi n g Po we r Su p p lie s series Universal 90-264VAC Input High Efficiency Improved EMI Performance 4242VDC Isolation Single ,Dual and Triple Outputs Full Safety Approvals Model Number Output Voltage Output Amps FL Ripple/Noise Efficiency typ at nom. Input DUAL OUTPUT - PCB Mount EDCA-5006 ±12 VDC EDCA-5007 ±15 VDC ±0.21A ±0.17A ±150mV pk-pk ±150mV pk-pk 71% 71% DUAL OUTPUT - Chassis Mount EDCC-5006 ±12 VDC EDCC-5007 ±15 VDC ±0.21A ±0.17A ±150mV pk-pk ±150mV pk-pk 71% 71% DUAL OUTPUT - DIN Rail Mount EDCC-5006/DRL ±12 VDC EDCC-5007/DRL ±15 VDC ±0.21A ±0.17A ±150mV pk-pk ±150mV pk-pk 71% 71% TRIPLE OUTPUT - PCB Mount ETCA-5009 5 ±12 VDC ETCA-5011 5 ±15 VDC 0.53 ±0.1 A 0.41 ±0.1 A 75 ±100 mV pk-pk 75 ±100 mV pk-pk 63% 61% TRIPLE OUTPUT - Chassis Mount ETCC-5009 5 ±12 VDC ETCC-5011 5 ±15 VDC 0.53 ±0.1 A 0.41 ±0.1 A 75 ±100 mV pk-pk 75 ±100 mV pk-pk 63% 61% TRIPLE OUTPUT - DIN Rail Mount ETCC-5009/DRL 5 ±12 VDC ETCC-5011/DRL 5 ±15 VDC 0.53 ±0.1 A 0.41 ±0.1 A 75 ±100 mV pk-pk 75 ±100 mV pk-pk 63% 61% WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ECA5 5W U l t r a m i n i a tu r e E nc aps ul at ed S w i t c hi n g Po we r Su p p lie s PHYSICAL SPECIFICATIONS INPUT SPECIFICATIONS Input Voltage Range Frequency Range Inrush Current, typ: Leakage Current 90-264 VAC (100-240VAC nom.) 47-63 Hz 20A@115V, 40A@230V Input * <3.5mA@264Vac,50Hz OUTPUT SPECIFICATIONS Voltage and Current Load Regulation (Note7) Line Regulation (Note 8) Cross Regulation (Note 11) Preset Accuracy (Note 9) Temperature Coefficient Ripple/Noise (Note 1, 2, 10) Over Voltage Protection Short Circuit Protection (Note 3) Hold Up Time See Selection Chart Single/Duals ± 3%, Triple: 0.5 / ± 0.5% (max) Single 0.1~1%, typ Duals ± 0.3~1%, typ Triple: 0.6 / ± 0.2% (max) Duals 2% Triple NA / ± 0.1% Single ±1% Duals: ±1.5% Triples: 1% /±5% ±0.03%/°C See Selection Chart Clamp * Continuous, self-recovering * 30 mS, typ (Nom. Input, 100% load) GENERAL SPECIFICATIONS Isolation (Note 4) Efficiency Switching Frequency Safety UL/cUL: UL-EU: CE: CB: EMC series 4242VDC Input-Output See Selection Chart 100Khz, (fixed, typical) UL60950-1 2nd ed./ C22.2 60950-1 2nd ed. EN60950-1 2nd ed. EN60601-1-2 IEC60950-1 2nd ed. EN55011 Class B Size PCB Mount 2.29L” x 1.77W” x 0.85H” Chassis Mount 3.77L” x 2.16W” x 1.0H” Din Rail 3.77L” x 2.16W” x 1.42H” Case Material Rynite, 94V-0 Rated Construction Encapsulated. Soft Pot Weight PCB / CHA 4 oz (113g) / 8.5 oz (241g) Din Rail 11.5 oz (326g) ENVIRONMENTAL SPECIFICATIONS Oper. Temperature (Note 5) Storage Temperature Relative Humidity MTBF 0 to +50°C (See Derate) -25 to +71°C * 0 to + 95%, non-cond * (Mil Std 217, 25°C) 270,000 Hrs NOTES 1. All measurements should be made directly at the terminals of the power supply. 2. Ripple and Noise depend upon output voltage as specified par particular model. 3. Short Circuit Protection is self-recovering when overcurrent condition is removed. 4. Isolation for up to 1minute duration. 5. Specified for free-air convection cooling. 6. Minimum load is NOT required for proper operation. However, auxiliary outputs should be reduced as a function of primary output minimum load or load regulation will be higher. 7. Load regulation measured from 20% to FL. 8. Line regulation measured from 90VAC to 264VAC. 9. Preset accuracy measured at nominal load, 120 VAC input. 10. O/P noise measured directly at pins/terminals at nom. load, 0.1uF bypass, pk-pk @20MHz bandwidth. 11. Cross Reg.: Measured output (5V for Triples) at nominal load with the other output(s) varied between 60% to 100% load. 12. 100% Production Tested. All specifications are typical at nominal input, full load, and 25°C unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ECA5 5W U l t r a m i n i a tu r e E nc aps ul at ed S w i t c hi n g Po we r Su p p lie s series OUTPUT DERATING CURVE 100 90 80 Load (%) 70 60 50 40 30 20 10 0 0 10 20 30 40 50 70 60 Ambient Temperature °C MECHANICAL DIMENSIONS .20in 5mm 2.29in 58.04mm .69in 17.5mm 1.77in 45mm 3 4 5 6 7 1 2 .69in .39in .49in 17.5mm .30in 12.5mm 10mm 7.5mm .39in 10mm .69in .89in 17.5mm 22.51mm 8 9 Model Type/Pin# Single PIN-OUT VIEWED FROM BOTTOM .85in 21.59mm .04in 1mm .22in 5.5mm 1.85in 47mm .20in 5.1mm 1 2 3 4 5 6 7 8 9 ACL ACN No Pin No Pin +Vout No Pin No Pin -Vout No Pin Dual Triple ACL ACN No Pin No Pin +Vout No Pin Com -Vout No Pin ACL ACN +Vout Com No Pin -Vout +5Vout +5VRTN No Pin Tolerance : .XX ± 0.508mm [ 0.02in] .XXX ± 0.254mm [ 0.01in] ECA5 series_B DESCRIPTION DATE addWWW.ASTRODYNETDI.COM Pin 5 & Pin 9 size 2013/8/6 hange Length from 57.9mm to 58.04mm 2015/05/20 change tolerance 2015/05/26 UNIT SHEET METAL TOLERANCE (UNLESS OTHERWISE SPECIFIED) DIMENSION X<8 8<X<25 25<X<100 100<X<300 300<X<800 SIZE ANGULAR SCALE PIERCING ±0.1 ±0.1 BENDING ±0.15 ±0.2 ±0.3° ±0.5° ±0.15 ±0.2 ±0.25 ±0.5° DRAWN ±0.3 ±1° CHECKED ±0.3 ±0.5 ±1.5° APPROVED SHEET Projection EX-5W MX-5W 1:1 ASTRODYNE USA: 1-800-823-8082 EXCA 5W series MODEL NO. OF ASTRODYNE PACIFIC: 886-2-26983458 TITLE 2D outline drawings Erica mm A4 MATERIAL PART NO. ECA5 5W U l t r a m i n i a tu r e E nc aps ul at ed S w i t c hi n g Po we r Su p p lie s series MECHANICAL DIMENSIONS - CHASSIS MOUNT 4 1 5 6 2 7 8 3 CHECKED APPROVED ±1° ±1.5° ±0.3 ±0.5 Single 1 2 3 4 5 6 7 8 9 ACN ACNACN N/C N/CN/C ACL ACLACL N/C N/CN/C -Vout -Vout+5VRTN -Vout Com+5Vout +Vout Com-Vout +Vout +VoutCom N/C N/C+Vout Dual Triple 2015/05/25 100<X<300 300<X<800 ±0.3 E.LIU TITLE DRAWN ±0.5° ±0.25 ±0.15 ±0.2 Model Type / Pin# NEW SPEC DESCRIPTION 2115 A WWW.ASTRODYNETDI.COM EX-5W-DIN RAIL DIN Rail mounting kit available for Chassis-mount modules, specify part # M-DRL-01. Kit includes mounting plate, DIN Rail cliip and assembly hardware. DRAWING NO. 0.100 [2.54] REV 1.42in 35.95mm DATE 0.350 [8.89] 25<X<100 PART NO. MODEL NO. OF A4 mm SHEET METAL TOLERANCE UNIT (UNLESS OTHERWISE SPECIFIED) SIZE SCALE PIERCING BENDING ANGULAR DIMENSION SHEET ±0.1 ±0.15 X<8 ±0.3° Projection ±0.5° ±0.1 ±0.2 8<X<25 1.00in 25.40mm MECHANICAL DIMENSIONS - DIN RAIL MATERIAL EX-5W-DIN RAIL 側視圖 9 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458