DTEPU60A SERIES 60 Watts AC/DC Desktop Power Supplies Single Output Rev A Size: 4.65in x 1.85in x 1.19in (118.0mm x 47.0mm x 30.3mm) OPTIONS FEATURES • Output Connectors • Output Voltage • • • • • • • APPLICATIONS • • • • • • Wide Operating Input Voltage 90~264VAC, 47-63Hz IEC-320-C14 Input Inlet Optional Output Connectors Available Single Output Level VI Compliant RoHS Compliant 1 Year Warranty • • • • Class I Useful in Variety of Applications Over Current and Short Circuit Protection UL/c-UL (UL 60950-1:2nd Edition) and TUV/GS (EN 60950-1:2nd Edition) • High Efficiency of 88% • Cooling by Free Air Convection DESCRIPTION POS System AV Equipment Industrial PC Note PC Charger LED Lighting The DTEPU60A series of AC DC desktop power supplies offers up to 60 watts of output power in a 4.65” x 1.85” x 1.19” package. This series offers single output models with output voltages ranging from 12~48VDC and a wide input voltage range of 90~264VAC. Each model is both Energy Efficiency Level VI and RoHS compliant and has high efficiency of 88%. Each model is also protected against over current and short circuit conditions and has UL/c-UL (UL 60950-1:2nd Edition) and TUV/GS (EN60950-1:2nd Edition) safety approvals. MODEL SELECTION TABLE (1) Model Number DTEPU60A-105 DTEPU60A-106 DTEPU60A-107 DTEPU60A-108 DTEPU60A-109 DTEPU60A-110 DTEPU60A-111 2/10/2016 Input Voltage Range Output Voltage 90~264VAC 12~13VDC 13~16VDC 16~21VDC 21~27VDC 27~33VDC 33~40VDC 40~48VDC Output Current 4.61~5.00A 3.75~4.61A 2.85~3.75A 2.22~2.85A 1.81~2.22A 1.50~1.81A 1.25~1.50A Ripple & Noise(6) Total Regulation 100mVp-p ±5% ±5% ±5% ±3% ±3% ±2% ±2% Output Power Efficiency(8) 60W 60W 60W 60W 60W 60W 60W 88% Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 4 DTEPU60A SERIES 60 Watts AC/DC Desktop Power Supplies Single Output Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Safety Approvals Input Voltage Range Operate Voltage Range Input Voltage Range Input Frequency 100 90 47 Low Line Input Current High Line Low Line Inrush Current High Line OUTPUT SPECIFICATIONS Output Voltage Line Regulation(4) Load Regulation(5) Output Power Output Current Ripple & Noise (20MHz BW)(6) Transient Response Time Start-Up Time Hold-Up Time Temperature Coefficient No Load Power Consumption PROTECTION Over Load Protection Short Circuit Protection ENVIRONMENTAL SPECIFICATIONS Operating Temperature Io=Full Load, Vin=100VAC Io=Full Load, Vin=240VAC Io=Full Load, 25ºC, Cool Start, Vin=100VAC Io=Full Load, 25ºC, Cool Start, Vin=240VAC 50 100 Io=Full Load Vin=100~120VAC Vin=230VAC, 10~90% Load Change at Condition 0.5 4 Storage Temperature 10~95%RH Operating Humidity Non-Condensing Operating Altitude (Elevation) Vibration Cooling Flammability Rating MTBF GENERAL SPECIFICATIONS Efficiency(8) Safety Ground Leakage Current Dielectric Withstanding Voltage Isolation Resistance PHYSICAL SPECIFICATIONS Weight Hz A A 1 5 % % See Table See Table 100 Full Load, Vin=90VAC Io=Full Load, Vin=100VAC Io=Full Load, Vin=100~240VAC Io=Full Load, Vin=100VAC Full Load, Vin=100~240VAC No Load, Vin=230VAC ±0.04 0.21 mVp-p mS S mS %/ºC W 110 150 % 4 3 10 Recovers automatically after fault condition is removed Automatic Recovery Derate linearly from 100% load at 40ºC 0 70 ºC -40 85 ºC 0 95 % 0 95 8 6 3000 % Air Discharge, IEC61000-4-2 Contact Discharge, IEC61000-4-2 All Conditions 10~500Hz, 10min/1cycle, 60min. each along X, Y, Z axes Line-Neutral Line-PE & Neutral-PE Surge Voltage VAC See Table Storage Humidity Electro Static Discharge 240 264 63 1.3 0.75 55 110 Operating Temperature at 25ºC, calculated per MIL-HDBK-217F Io=Full Load, Vin=230VAC Vin=240VAC/60Hz Primary to Secondary Primary to PE Test Voltage=500VDC kV M 5 1 2 Free Air Convection UL94V-1 G kV 100,000 Hours 88 % mA 0.75 4242 2652 VDC 50 MΩ 11.99oz (340g) 4.65in x 1.85in x 1.19in (118mm x 47mm x 30.3mm) Dimensions (L x W x H) SAFETY & EMC CHARACTERISTICS Safety Approvals EMC Emission Protection Classes 2/10/2016 UL/c-UL (UL 60950-1: 2nd Edition) TUV/GS (EN 60950-1: 2nd Edition) Compliance to EN55022 (CISPR22) Class I Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Class B Page 2 of 4 Rev A DTEPU60A SERIES 60 Watts AC/DC Desktop Power Supplies Single Output NOTES (1) (2) (3) (4) (5) (6) (7) (8) DTEPU60A-105~110 are required to use AWG#18/4FT output cable. DTEPU60A-111 is required to use AWG#20/4FT output cable. The electrical characteristics will be changed by modified output cable. Output can provide up to peak load when the power supply starts up. Staying in more than rated load continually is not allowed. Each output is checked to be within voltage accuracy in 60% rated load condition. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. Load regulation is defined by changing ±40% of measured output load from 60% rated load. Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with 0.47µF capacitor at rated load and nominal line. Hold up time is measured from end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. Efficiency is measured at rated load, and nominal line. DERATING CURVES Input Voltage Derating Curve Temperature Derating Curve 2/10/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Rev A DTEPU60A SERIES 60 Watts AC/DC Desktop Power Supplies Single Output MECHANICAL DRAWINGS COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 2/10/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4