LFM15 1 5 W U l t r a m i n i a t ure Open Frame Switching Power Supplies series Universal 90-264VAC Input High Efficiency Regulated Outputs 3000V Isolation Single Outputs UL60950 & EN60950 Approved 2.75”W x 1.89”L x 0.91”H Model Number Output Voltage Output Amps(max) Ripple pk-pk Efficiency SINGLE OUTPUT LFM15-3.3 LFM15-5 LFM15-9 LFM15-12 LFM15-15 LFM15-24 3.3 VDC 5 VDC 9 VDC 12 VDC 15VDC 24VDC 3A 3A 1.67A 1.25A 1A 0.63A 50mV 1% 1% 1% 1% 1% 70% 73% 75% 80% 80% 82% WWW.ASTRODYNE.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 LFM15 1 5 W U l t r a m i n i a t ure Open Frame Switching Power Supplies 0.91(23.0) 90-264 VAC 47-63 Hz 20A@100V, 40A@200V Input * 0.25mA 0.150(3.81) OUTPUT SPECIFICATIONS -Vo ACN +Vo 0.492(12.5) 1.89(48) See Selection Chart +/- 1% +/- 0.5% +/- 1% +/-0.05%/°C See Selection Chart Continuous 16 mS, typ @ 115VAC 0.945(24) Voltage and Current Load Regulation (10%-FL) Line Regulation (LL-HL, FL) Voltage Accuracy Temperature Coefficient Ripple/Noise Short Circuit Protection Hold Up Time 0.040(1.02) 0.070(1.78) 0.157(4.0) Input Voltage Range Frequency Range Inrush Current, typ: Leakage Current MECHANICAL SPECIFICATIONS ACL 1.398(35.51) INPUT SPECIFICATIONS series VR 0.157(4.0) 2.441(62) 2.75(69.9) GENERAL SPECIFICATIONS Notes: Input-Out Isolation Efficiency Safety 3000VAC See Selection Chart UL60950, EN60950 1) Add a 0.1uF ceramic capacitor and a 10uF E.L.capacitor to output for Ripple & Noise (R & N) measuring @ 20MHz BW. PHYSICAL SPECIFICATIONS Size Construction Weight 2.75” x 1.89” x 0.91” Open Frame 2.5oz (71g) ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Cooling Storage Temperature 0 to +40°C Free Air Convection -20 to +85°C * All specifications are typical at nominal input, full load, and 25DegC unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNE.COM Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458