Series AM3T-NZ Custom Product Special Conditions May Apply 3 Watt | DC-DC Converter FEATURES: RoHS compliant 24 Pin DIP Package Shielded metal package High efficiency up to 86% Wide 2:1 input range Operating temperature -40oC to + 85oC Input / Output Isolation 1500VDC Pin compatible with multiple manufacturers Continuous short circuit protection Models Single output Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max. Cap. Load (µF) Efficiency (%) 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 3.3 5 12 15 24 3.3 5 12 15 24 3.3 5 12 15 909 600 250 200 125 909 600 250 200 125 909 600 250 200 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 4700 4700 2700 2200 1800 4700 4700 2700 2200 1800 4700 4700 2700 2200 74 81 83 82 82 78 81 86 86 85 76 82 86 86 AM3T-1203S-NZ AM3T-1205S-NZ AM3T-1212S-NZ AM3T-1215S-NZ AM3T-1224S-NZ AM3T-2403S-NZ AM3T-2405S-NZ AM3T-2412S-NZ AM3T-2415S-NZ AM3T-2424S-NZ AM3T-4803S-NZ AM3T-4805S-NZ AM3T-4812S-NZ AM3T-4815S-NZ Models Dual output Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) AM3T-1205D-NZ 9-18 ±5 ±300 1500 81 AM3T-1209D-NZ 9-18 ±9 ±166 1500 84 AM3T-1212D-NZ 9-18 ±12 ±125 1500 84 AM3T-1215D-NZ 9-18 ±15 ±100 1500 85 AM3T-2405D-NZ 18-36 ±5 ±300 1500 82 AM3T-2412D-NZ 18-36 ±12 ±125 1500 84 AM3T-2415D-NZ 18-36 ±15 ±100 1500 84 AM3T-4805D-NZ 36-75 ±5 ±300 1500 82 AM3T-4812D-NZ 36-75 ±12 ±125 1500 84 AM3T-4815D-NZ 36-75 ±15 ±100 1500 85 NOTE: All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Nominal 12 24 48 Typical www.aimtec.com F 051e R6.E Units VDC (Pi) Network Filter Absolute Maximum (1 sec max.) Maximum 9-18 18-36 36-75 12 Vin 24 Vin 48 Vin 25 50 100 Tel: +1 514 620 2722 1 of 4 VDC Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM3T-NZ Custom Product Special Conditions May Apply 3 Watt | DC-DC Converter Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 60 sec Output Specifications Parameters Voltage accuracy Dual Output Voltage Balance Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise Transient Recovery Time Transient Deviation Maximum Units 1500 > 1000 120 Conditions Typical Balanced Loads ±1 ±0.5 VDC MOhm pF Maximum Units % % Continuous Auto-recovery ±0.2 ±0.2 ±0.03 75 0.5 ±2 20MHz bandwidth 25% Load Step 25% Load Step % % %/oC mV p-p m sec % General Specifications Parameters Switching frequency Operating temperature Storage temperature Max Case temperature Temperature Rise Conditions Typical 100% load With derating above +85C 200 Full Load, 25 oC 1.5mm from case for 10 Seconds 25 oC Maximum Units KHz oC oC oC oC -40 to +85 -55 to +125 100 Lead Temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF oC 300 Free air convection 95 Aluminum Alloy 14 1.26 x 0.80 x 0.42 inches 32. 00 x 20.00 x 10.80 mm >1 000 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) % g Safety Specifications Parameters Agency approvals Standards www.aimtec.com F 051e R6.E cULus (AM3T-2405S-NZ and AM3T-2415S-NZ only) UL 60950-1 Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Custom Product Special Conditions May Apply Pin Out Specifications Pin Series AM3T-NZ 3 Watt | DC-DC Converter Dimensions 1500VDC 1 2 3 9 10 11 12/13 14 15 16 22 23 24 Single Dual No pin -V Input -V Input No pin No pin N.C. No pin +V Output No pin -V Output V+ Input V+ Input No pin No pin -V Input -V Input Common No pin -V Output No pin +V Output No pin Common +V Input +V Input No pin N.C.: not connected External capacitors Vin (VDC) Cin) (uF) 12 100 24 & 48 10-47 Vout (VDC) 3.3 5 12 15 ±5 ±12 ±15 Cout (uF) 10 10 10 10 10 10 10 Filtering Single output Filtering Dual output Recommended Circuit Model C1 C2 12 Vin 4.7 µF / 50V 4.7 µF / 50V 24 Vin 4.7 µF / 50V 4.7 µF / 50V 48 Vin 4.7 µF / 100V 4.7 µF / 100V Note: Fuse is user selectable www.aimtec.com F 051e R6.E C4 LDM MOV TVS C3 LDM2 1 nF /2KV 1 nF /2KV 1 nF /2KV 12 µH 12 µH 12 µH S14K35 S14K60 SMCJ28A SMCJ48A SMCJ90A 680 µF / 25V 330 µF / 50V 330 µF / 100V 56 µH 56 µH Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Custom Product Special Conditions May Apply Series AM3T-NZ 3 Watt | DC-DC Converter Free Air Convection Derating 85º C Output Power (%) 100 80 60 Safe Operating Area 40 20 0 - 40 - 20 0 20 40 60 80 85 105 100 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R6.E Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only