KLA1S-Txxx-xx LF Series

BOTHHAND
“LAN-MATE” SERIES
1000 BASE-T RJ45 1 x 1 INTEGRATED MAGNETICS CONNECTOR
1000 BASE-T MAGNETICS
z
z
z
z
z
z
z
z
z
z
RJ-45 needs to be matched FCC standard.
Complies with requirement of IEEE 802.3ab standards.
RJ-45 connector integrated with transformer/impedance
resistor/high voltage capacitor.
Size same as RJ-45 connector to save PCB board space.
Reduced EMI radiation to improve EMI performance.
Design for 1000 BASE transmission over UTP-5 cable.
Isolation @ 60Hz: Input to output:1500Vrms.
Compliance with ROHS requirements.
Operating temperature range: 0℃ to +70℃.
Storage temperature range: -25℃ to +85℃.
USA
Page 1 of 4
S
T
Electrical Specifications @ 25℃
Turns Ratio
Cross talk
TX
RX
OCL (uH Min)
@ 100KHz/0.1V
with 8mA DC Bias
KLA1S109-34 LF
1CT: 1CT
1CT: 1CT
350
-40
-35
-30
1500
KLA1S109F-1-43 LF
1CT: 1CT
1CT: 1CT
350
-40
-35
-30
1500
KLA1S109M-43 LF
1CT: 1CT
1CT: 1CT
350
-40
-35
-30
1500
Part
(±5%)
Number
HI-POT
0.3-30MHz
(dB Min)
30-60MHz
60-100MHz
(Vrms)
Continue
Insertion Loss
Part
Return Loss
CMR
(dB Max)
1-100MHz
1-30MHz
KLA1S109-34 LF
-1.0
-16
-13.5
-11.5
-10
--
-30
-25
-20
KLA1S109F-1-43 LF
-1.0
-16
-13.5
-11.5
-10
--
-30
-25
-20
KLA1S109M-43 LF
-1.0
-16
-13.5
-11.5
-10
--
-30
-25
-20
Number
(dB Min) @ Load 100Ω
30-40MHz 40-50MHz 50-80MHz 100MHz 1-30MHz
(dB Min)
30-60MHz 60-125MHz
For customized parts or more detailed information, please log on www.bothhandusa.com or write to [email protected]
NOTE: 1. Differential to Common Mode Rejection (dB Min)
1-30MHz
30-60MHz
60-100MHz
-43
-37
-33
Bothhand USA
Tel: 978-887-8050
Fax: 978-887-5434
E-mail : [email protected]
http://www.bothhandusa.com
139
BOTHHAND
USA
“LAN-MATE” SERIES
1000 BASE-T RJ45 1 x 1 INTEGRATED MAGNETICS CONNECTOR
1000 BASE-T MAGNETICS
Mechanicals
Page 2 of 4
KLA1SXXX-XX LF
1. Plastic Material
: Thermoplastic (UL 94V-0), Black Housing
2. Metal Shield
: Brass, 20u" inches thick Nickel
3. Spring Wire
:
4. Solder Pin
: 0.5x0.35mm, SUS430 with solder Plated
5. Durability
: 750 Mating cycles Min.
-6
0.45mm Dia. Phosphor bronze with 0.1524 *10 m gold plated &
1.524*10-6 m thick Nickel
PCB Layout Mounting Hole (Top View)
KLA1SXXX-XX LF
Bothhand USA
Tel: 978-887-8050
Fax: 978-887-5434
E-mail : [email protected]
http://www.bothhandusa.com
140
BOTHHAND
“LAN-MATE” SERIES
1000 BASE-T RJ45 1 x 1 INTEGRATED MAGNETICS CONNECTOR
1000 BASE-T MAGNETICS
USA
Page 3 of 4
Specification
Packing Manner
Q’ty per Tubel
Q’ty/ Inner box
Q’ty/ Carton
KLA1SXXX LF
TUBE
30
480
1920
KLA1TXXX LF
TUBE
27
432
1728
Schematics
KLA1S109-34 LF
KLA1S109F-1-43 LF
KLA1S109M-43 LF
Bothhand USA
Tel: 978-887-8050
Fax: 978-887-5434
E-mail : [email protected]
http://www.bothhandusa.com
141
BOTHHAND
USA
“LAN-MATE” SERIES
1000 BASE-T RJ45 1 x 1 INTEGRATED MAGNETICS CONNECTOR
1000 BASE-T MAGNETICS
Page 4 of 4
Part Numbering System
Example BHJack Part Number:
K
L
A
代表非 MD TAB DOWN
機構
1000 BASE (802.3U)
1
S
Number of parts
for
Led options RoHS
Shield type
S: standard shield
different circuit
T: with spring tab on top
and side
D: spring tab on side
“1” : single port
RJ-45 JACK
E:
109
-XX
LF
spring tab on top
Bothhand USA
Tel: 978-887-8050
Fax: 978-887-5434
E-mail : [email protected]
http://www.bothhandusa.com
142