CoreCap® NPV Series NbO - Ceramic Multianode Chip Capacitors NPV MULTIANODE CONSTRUCTION • • • • • Multi-anode construction Super low ESR Non-burn safe technology 3x reflow 260°C compatible V-Core filtering and power supply applications (e.g. servers, notebooks etc.) • CV range: 330-560μF / 2.5-4V CASE DIMENSIONS: millimeters (inches) L W H Code EIA Code EIA Metric L±0.20 (0.008) V 2924 7361-38 7.30 (0.287) W+0.20 (0.008) H+0.20 (0.008) -0.10 (0.004) -0.10 (0.004) 6.10 (0.240) 3.55 (0.140) W1±0.20 (0.008) A+0.30 (0.012) -0.20 (0.008) S Min. 3.10 (0.120) 1.30 (0.051) 4.40 (0.173) W1 dimension applies to the termination width for A dimensional area only. A S A W1 For part marking see page 130 HOW TO ORDER NPV V Type Case Size See table above 567 M 002 Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier Tolerance M=±20% Rated DC Voltage 002=2.5Vdc 004=4Vdc # Packaging R = Pure Tin 7" Reel S = Pure Tin 13" Reel 0003 ESR in mΩ TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current: Voltage Range (VR) Category Voltage (VC) Temperature Range: ESL: Reliability: +85°C: +105ºC: All technical data relate to an ambient temperature of +25°C 330 μF to 560 μF ±20% 0.02CV (CV = capacitance x voltage) 2.5 4 1.7 2.7 -55ºC to +105ºC with category voltage Typically 2.5nH below 10MHz 0.2% per 1000 hours at 85ºC, 1xVR with 0.1Ω/V series impedance with 60% confidence level 91 CoreCap® NPV Series NbO - Ceramic Multianode Chip Capacitors CAPACITANCE AND RATED VOLTAGE, VR (VOLTAGE CODE) RANGE (LETTER DENOTES CASE SIZE) Capacitance μF Code 330 337 470 477 560 567 680 687 1000 108 Rated Voltage DC to 85°C / 0.66 Vr to 125°C 4V (G) 6.3V (J) 10V (A) 16V (C) V (3) V (3) 2.5V (e) LEAD-FREE COMPATIBLE COMPONENT V (3) Available Ratings, (ESR ratings in mOhms in brackets) Engineering samples - please contact manufacturer *Codes under development - subject to change Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards. NON-BURN NON-SMOKE RATINGS & PART NUMBER REFERENCE AVX Part No. Case Size Capacitance (μF) Rated Voltage (V) DCL (μA) Max. DF ESR % Max. (mΩ) Max. @300kHz 100kHz RMS Current (mA) MSL 25ºC 100kHz RMS Voltage (mV) 85ºC 125ºC 25ºC 85ºC 125ºC 4157 1848 14 12 6 4157 4157 1848 1848 14 14 12 12 6 6 2.5 Volt @ 85ºC (1.7 Volt @ 105ºC) NPVV567M002#0003 V 560 2.5 28 6 3 3 4619 4 Volt @ 85°C (2.7 Volt @ 105°C) NPVV337M004#0003 NPVV477M004#0003 V V 330 470 4 4 26.4 37.6 6 6 3 3 3 3 4619 4619 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. The EIA & CECC standards for low ESR solid Tantalum Capacitors allow an ESR movement to 1.25 times catalog limit post mounting. For typical weight and composition see page 123. NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. ESR VS FREQUENCY PLOTS – TYPICAL Impedance ESR 10000 1000 ESR (mOhms) ESR (mOhms) 1000 100 10 100 10 1 1 100 92 1000 10000 Frequency (Hz) 100000 1000000 100 1000 10000 Frequency (Hz) 100000 1000000