TCN PulseCapTM Series High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series With Conductive Polymer Electrode FEATURES Polarity Band (Anode+) W L CASE DIMENSIONS: S AP + • Pulse energy battery support • Power backup in SSDs LEAD-FREE COMPATIBLE COMPONENT W H W1 APPLICATIONS • Large case size for maximum capacitance • Conductive polymer electrode reduces ignition failure mode • Low ESR • Undertab terminations layout: – High Volumetric Efficiency – High PCB assembly density – High capacitance in smaller dimensions • 3x reflow 260°C compatible • 1case size available W1 AN _ Code EIA Code EIA Metric 4 2924 7361-20 millimeters (inches) L+0.30 (0.012) W+0.30 (0.012) -0.30 (0.012) -0.30 (0.012) 7.30 (0.287) 6.00 (0.240) H max. W1±0.20 (0.008) 2.00 (0.079) 4.75 (0.187) AP+0.30 (0.012) AN+0.30 (0.012) -0.20 (0.008) -0.20 (0.008) 2.00 (0.079) 3.20 (0.126) W1 dimension applies to the termination width for A dimensional area only. MARKING 4 CASE AVX LOGO Polymer Polarity Band (Anode+) Capacitance Value in pF 158 = 1500µF 158 J XXXXX Rated Voltage J = 6.3V ID Code HOW TO ORDER TCN 4 Type Case Size See table above 158 M 006 Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier Tolerance M = ±20% Rated DC Voltage 006 = 6.3Vdc 016 = 16Vdc 0055 R Packaging R = Pure Tin 7" Reel ESR in mΩ TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage (VR) Surge Voltage (VS) Temperature Range: Reliability: All technical data relate to an ambient temperature of +25°C 220 μF to 1500 μF ±20% 0.1CV 6.3 16 25 8 21 33 -55°C to +85°C 1% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance with 60% confidence level MARCH 2015 ■ 119 TCN PulseCapTM Series High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series With Conductive Polymer Electrode CAPACITANCE AND RATED VOLTAGE RANGE (FIGURE DENOTES CASE SIZE) Capacitance μF 100 150 220 330 1000 1500 Voltage Rating DC (VR ) to 85°C Code 107 157 227 337 108 158 6.3V (G) 16V (J) 25V (C) 3* 4(70)* 4(70) 4(70) 3*/4(55) 4(55) Available Codes (ESR ratings in mOhms in brackets) Engineering samples - please contact manufacturer *Codes under development – subject to change Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE AVX Part No. Case Size Cap (μF) Rated Voltage (V) Rated Temp (ºC) Category Voltage (V) TCN4108M006#0055 TCN4158M006#0055 4 4 1000 1500 6.3 6.3 85 85 6.3 6.3 TCN4227M016#0070 TCN4337M016#0070 4 4 220 330 16 16 105 85 16 16 TCN4157M025#0070 4 150 25 85 25 Category Temp (ºC) DCL (μA) Max. 6.3 Volt @ 85ºC 85 600 85 900 16 Volt @ 85ºC 105 352 85 528 25 Volt @ 85°C 85 375 DF % Max. ESR Max. (mΩ) @100kHz MSL 100kHz Ripple Current (mA) 20 20 55 55 20 20 20 25ºC 85ºC 105ºC Product Category 4 4 1860 1860 1302 1302 – – 85°C 85°C 70 70 4 4 1650 1650 1155 1155 660 – 105°C 85°C 70 4 1650 1155 – 85°C Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5 RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalogue limit post mounting For typical weight and composition see page 214. NOTE: AVX reserves the right to supply a higher voltage rating in the same case size, to the same reliability standards. 120 ■ MARCH 2015 TCN PulseCapTM Series High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series With Conductive Polymer Electrode PRODUCT CATEGORY 105°C TEST Endurance Storage Life Humidity Temperature Stability Surge Voltage 105°C series (Temperature range -55ºC to +105ºC) Characteristics Visual examination no visible damage Determine after application of rated voltage for 2000 +48/-0 hours at 85±2ºC and then leaving 1-2 hours at DCL 1.25 x initial limit room temperature. Also determine after application of ΔC/C within +20/-30% of initial value 105ºC temperature, category voltage for 2000 +48/-0 DF 1.5 x initial limit hours and then leaving 1-2 hours at room temperature. Power supply impedance to be ≤0.1Ω/V. ESR 2 x initial limit Visual examination no visible damage DCL (VR ≤ 75V) 1.25 x initial limit DCL (VR > 75V) 2 x initial limit 105ºC, 0V, 2000h ΔC/C within ±20% of initial value DF 1.5 x initial limit ESR 2 x initial limit Visual examination no visible damage Determine after storage without applied voltage DCL 3 x initial limit at 65±2ºC and 95±2% relative humidity for 500 ΔC/C within +30/-20% of initial value hours and then recovery 1-2 hours at room temperature. DF 1.5 x initial limit ESR 2 x initial limit Condition Step 1 2 3 4 5 6 Temperature°C +20±2 -55+0/-3 +20±2 +85+3/-0 +105+3/-0 +20±2 Duration(min) 15 15 15 15 15 15 Test temperature: 105ºC+3/0ºC Test voltage: Category voltage at 105ºC Surge voltage: 1.3 x category voltage at 105ºC Series protection resistance 1000±100Ω Discharge resistance: 1000Ω Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge DCL ΔC/C DF Visual examination +20ºC -55ºC IL* n/a n/a +0/-20% IL* 1.5 x IL* +20ºC +85ºC +105ºC +20ºC IL* 10 x IL* 12.5 x IL* IL* ±5% +20/-0% +30/-0% ±5% IL* 1.5 x IL* 2 x IL* IL* no visible damage DCL initial limit ΔC/C within +20/-30% of initial value DF 1.25 x initial limit *Initial Limit PRODUCT CATEGORY 85°C TEST Endurance Storage Life Humidity Temperature Stability Surge Voltage 85°C series (Temperature Condition Visual examination Determine after application of rated DCL voltage for 2000 +48/-0 hours at 85±2ºC and then leaving 1-2 hours at ΔC/C room temperature. Power supply DF impedance to be ≤0.1Ω/V. ESR Visual examination DCL 85ºC, 0V, 2000h ΔC/C DF ESR Visual examination Determine after storage without DCL applied voltage at 65±2ºC and 95±2% relative humidity for 500 hours and ΔC/C then recovery 1-2 hours at room DF temperature. ESR Step 1 2 3 4 5 Temperature°C +20±2 -55+0/-3 +20±2 +85+3/-0 +20±2 Duration(min) 15 15 15 15 15 Test temperature: 85+3/0ºC Test voltage: Rated voltage Surge voltage: 1.3 x rated voltage Series protection resistance 1000±100Ω. Discharge resistance: 1000Ω Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge DCL ΔC/C DF range -55ºC to +85ºC) Characteristics no visible damage 1.25 x initial limit within +20/-30% of initial value 1.5 x initial limit 2 x initial limit no visible damage 1.25 x initial limit within ±20% of initial value 1.5 x initial limit 2 x initial limit no visible damage 5 x initial limit within +40/-20% of initial value 1.5 x initial limit 2 x initial limit +20ºC -55ºC +20ºC +85ºC +20ºC IL* n/a IL* 10 x IL* IL* n/a +0/-20% ±5% +20/-0% ±5% IL* 1.5 x IL* IL* 1.5 x IL* IL* Visual examination no visible damage DCL initial limit ΔC/C within +20/-30% of initial value DF 1.25 x initial limit *Initial Limit MARCH 2015 ■ 121