DuroSite® LED Linear Fixture - UL / CSA for Indoor and Outdoor Industrial Applications Application Dialight’s DuroSite® LED linear fixture replaces HID and fluorescent lighting fixtures in industrial applications. The DuroSite® LED Linear fixture’s rugged solid state design makes it highly resistant to shock and vibration. Its fully gasketed IP 66 rated enclosure makes it suitable for dusty & wet locations, its 1598/A rating guarantees added protection from salt water spray. The DuroSite® LED Linear’s superior design allows for wiring and mounting versatility and ease of installation for many lighting applications. DuroSite® LED Linear Fixture Low profile Mechanical Information Fixture Weight: 10 lbs (4.50 kg) 4’ 7 lbs (3.13 kg) 2’ Shipping Weight: 11 lbs (4.90 kg) 4’ 8 lbs (3.64 kg) 2’ Mounting: (4) 3/4” NPT openings Optional swivel bracket - LPXW4 Optional low profile bracket - LPXW4LP Electrical Specifications Operating Voltage: 100 - 277V AC 50/60Hz Power Consumption: See ordering information Operating Temp: -40°F to +149°F (-40°C to +65°C) Certifications & Ratings Harmonics: IEC 61000-3-2 • UL 1598/A Noise Requirements/ EMC: Dimensions in Inches [mm] • UL 8750 • CSA 22.2 No.250.0 • IP 66/67 Surge Protection: EN 61000-4-5 4 kV line to line 4 kV line to ground THD: < 20% Power Factor: > 0.9 • NEMA 4X Features & Benefits FCC Title 47, Subpart B, Section 15, class A device. RF Immunity; 10V/m, 80MHz-1GHz • 5 year full performance warranty • L70 rated for >100,000 hours @ 25°C • Instant on/off operation Power supply equipped with inline fuse • Resistant to water, salt, dust & vibration Construction • Resistant up to 20 PSI of hose directed water Body: Powder coated aluminum • Mercury free Lens: Polycarbonate • Temperature compensation technology for longer life Photometric Information • Universal input (100-277V AC), 50/60Hz • Factory sealed CRI: 75 • Low profile housing for limited space applications CCT: 5,000K (cool white) • Dual NPT entries for in / out wiring IES Files: Available upon request • Integrated wiring box • Thru wiring capability All values typical unless otherwise stated All lumen values are typical (tolerance +/- 10%) *Consult factory for 80 min CRI Mounting Options LPXW4LP Side Mount - LPXW4 www.dialight.com Top Mount - LTXW4 Application Dialight’s DuroSite® LED linear fixture replaces HID and fluorescent lighting fixtures in industrial applications. The DuroSite® LED Linear fixture’s rugged solid state design makes it highly resistant to shock and vibration. Its fully gasketed IP 66 rated enclosure makes it suitable for dusty & wet locations, its 1598/A rating guarantees added protection from salt water spray. The DuroSite® LED Linear’s superior design allows for mounting versatility and ease of installation for many lighting applications. DuroSite® LED Linear Fixture Top Conduit Mounting Mechanical Information Fixture Weight: 11 lbs (4.99 kg) 4’ 10 lbs (4.53 kg) 2’ Shipping Weight: 13 lbs (5.90 kg) 4’ 12 lbs (5.44 kg) 2’ Mounting: (3) 3/4” NPT openings Optional swivel bracket - LTXW4 Optional low profile bracket - LTXW4LP Electrical Specifications Bracket not included Dimensions in Inches [mm] Certifications & Ratings • UL 1598/A Operating Voltage: 100 - 277V AC 50/60Hz Power Consumption: See ordering information Operating Temp: -40°F to +149°F (-40°C to +65°C) Harmonics: IEC 61000-3-2 Noise Requirements/ EMC: • UL 8750 • CSA 22.2 No.250.0 • IP 66 FCC Title 47, Subpart B, Section 15, class A device. RF Immunity; 10V/m, 80MHz-1GHz Surge Protection: EN 61000-4-5 4 kV line to line 4 kV line to ground • 5 year full performance warranty THD: < 20% • L70 rated for >100,000 hours @ 25°C Power Factor: > 0.9 • NEMA 4X Features & Benefits • Instant on/off operation Power supply equipped with inline fuse • Resistant to water, salt, dust & vibration Construction • Resistant up to 20 PSI of hose directed water • Universal input (100-277V AC), 50/60Hz Body: Powder coated aluminum • Mercury free Lens: Polycarbonate • Temperature compensation technology for longer life Photometric Information • Factory sealed • Integrated wiring box CRI: 75 CCT: 5,000K (cool white) IES Files: Available upon request All values typical unless otherwise stated All lumen values are typical (tolerance +/- 10%) *Consult factory for 80 min CRI Mounting Options Conduit Top Mount Conduit Side Mount www.dialight.com LTXW4 LTXW4LP Application: Dialight’s DuroSite® LED linear fixture replaces HID and fluorescent lighting fixtures in industrial applications. The DuroSite® LED Linear fixture’s rugged solid state design makes it highly resistant to shock and vibration. Its fully gasketed IP 66 rated enclosure makes it suitable for dusty & wet locations, its 1598 rating guarantees added protection from salt water spray. The DuroSite LED Linear’s superior design allows for mounting versatility and ease of installation for many lighting applications. This fixture is offered in sustained and maintained configurations. Sustained has a single AC input and battery backup mode is entered upon any loss of power. Fixture cannot be turned off without entering battery backup mode. Maintained has two AC inputs. The fixture can be turned on and off via AC-1 and Fixture only enters battery backup mode when AC-2 is lost or low. DuroSite® LED Linear Fixture Battery Backup Mechanical Information Fixture Weight: 18.0 lbs (8.16 kg) Shipping Weight: 21.0 lbs (9.53 kg) Mounting: (1) Threaded 3/4” NPT Side (2) Threaded 3/4” NPT Ends Electrical specifications: Dimensions in Inches [mm] Certifications • • • • • UL 1598/A UL 924 CSA C22.2 #250.0 IP66 NEMA 4X 100-277V AC 50/60 Hz Power Consumption: 85W Operating Temp: -20°F to +149°F (-20°C to +65°C) Battery: 3.6V 10Ah Nimh Battery Life: 4 years Battery Duration: >3 hours Harmonics: IEC 61000-3-2 Noise Requirements/ EMC: Features & Benefits • L70 rated for >100,000 hours @ 25°C • 3 year warranty (excluding battery) • 450 lumens in battery backup mode consistent throughout life of battery • Low power consumption • Battery status indication light • Instant on/off operation • • • • • Operating Voltage: Push to test button Superior color rendition index compared to HPS, LPS, MV Mercury Free Resistant to shock and vibration Temperature compensation technology for longer life FCC Title 47, Subpart B, Section 15, class A device. RF Immunity; 10V/m, 80MHz-1GHz Surge Protection: EN 61000-4-5 1 kV line to line 2 kV line to ground THD: < 20% Power Factor: > 0.9 Construction Body: Powder Coated Aluminum Lens: Polycarbonate Photometric Information CRI: 75 CCT: 5,650K (cool white) IES Files: Available upon request All values typical unless otherwise state All lumen values are typical (tolerance +/- 10%) Mounting Options In-line Conduit Mount Overhead Conduit Mount www.dialight.com LSXW4 DuroSite® LED Linear Fixtures Candela Plots Standard models Battery Backup models Ordering Information Part Number Length Type LPM3C4D2P 2’ Low profile LPM3C4M2P 4’ LPM3C4B2D 2’ LPM3C4H2D 4’ Low profile Lens Initial Fixture Lumens1,2,3,4 Wattage Lumens Per Watt Low profile Models Clear 3,500 33 106 Low profile Clear 7,000 66 106 Low profile Diffused 3,300 33 100 Diffused 6,600 66 100 Clear 3,500 33 106 Top Conduit Mounting Models LTM3C4D2P 2’ Top Conduit LTM3C4M2P 4’ Top Conduit Clear 7,000 66 106 LTM3C4B2D 2’ Top Conduit Diffused 3,300 33 100 LTM3C4H2D 4’ Top Conduit Diffused 6,600 66 100 LSM3C4MEP 4’ Sustained Clear 7,000 85 85 LSM3C4MNP 4’ Maintained Clear 7,000 85 85 Battery Backup Models Notes: 1 Part numbers listed in the above table are cool white. For neutral white models replace the 5th character with N. Ex. LTM3C4D2P becomes LTM3N4D2P 2 450 Lumens in Battery Backup mode 3 Expect a 10% reduction in Lumens for 80 CRI minimum fixtures 4 All lumen values are typical (tolerance +/- 10%) For Dialight’s complete list of DLC qualified products, please click this link: www.dialight.com/DLC Battery Backup Wiring Configurations (Optional) Add one of the following suffixes to the above Part Numbers for factory wired and installed 10’ cable and cable gland: • GS added for installed on one of the side entries (shown to the left) • GT added for installed on the top entry (not shown) Ex. LSM3C4D2P becomes LSM3C4D2PGS Add one of the following suffixes to the above Part Numbers for factory wired and installed 10' cable and 3/4" conduit fitting.: • CT added for installed on the top entry (shown to the left) • CS added for installed on one the side entries (not shown) Ex. LSM3C4D2P becomes LSM3C4D2PCT www.dialight.com DuroSite® LED Linear Fixtures Options and Accessories Low Profile Models Description Material Part Number Kit Includes Class I, Div. 2 / Class II - Low Profile Models LPXW4 316 Stainless Steel Mounting bracket Can be angled at 0°, 30°, 45°, 60° & 90° Mounting bracket Mounting hardware LPXW4LP 316 Stainless Steel Low profile mounting bracket Can be angled at 0° and 15° Mounting bracket Mounting hardware LTXENDCAPKIT 304 Stainless Steel Chain mount and secondary retention bracket 2 Brackets Mounting hardware LTXSAFEKIT 304 Stainless Steel Safety Cable Kit for secondary retention 2 brackets 2 53” Safety cables Mounting hardware Top Conduit Mount Models Part Number Description Material Kit Includes Class I, Div. 2 / Class II - Standard Models LTXW4 6061 Aluminum Mounting bracket Can be angled at 0°, 30°, 45°, 60° & 90° Mounting bracket Mounting hardware LTXW4LP 5052 Aluminum Low profile mounting bracket Can be angled at 0° and 15° Mounting bracket Mounting hardware LTXENDCAPKIT 304 Stainless Steel Chain mount and secondary retention bracket 2 Brackets Mounting hardware LTXSAFEKIT 304 Stainless Steel Safety Cable Kit for secondary retention 2 brackets 2 53” Safety cables Mounting hardware LTXLSXW4 6061 Aluminum Retrofit bracket adapter (used to connect LTM model fixtures to an existing LSXW4 bracket) 2 Bracket adapters Mounting hardware www.dialight.com DuroSite® LED Linear Fixtures Options and Accessories Battery Back up Models Part Number Material Description Kit Includes Battery Back up Models LSXW4 6061 Aluminum Mounting bracket Can be angled at 0°, 30°, 45°, 60° & 90° Mounting bracket Mounting hardware LSXENDCAPKIT 304 Stainless Steel Chain mount brackets 2 Mounting brackets Mounting hardware HZXSAFEKIT 316 Stainless Steel Safety Cable Kit 2 Eyelets 2 53” Safety cables Mounting hardware Dialight reserves the right to make changes at any time in order to supply the best product possible. The most current version of this document will always be available at: www.dialight.com/Assets/Brochures_And_Catalogs/Illumination/MDTDLINX001.pdf Warranty Statement: EXCEPT FOR THE WARRANTY EXPRESSLY PROVIDED FOR [HEREIN/ABOVE/BELOW], DIALIGHT DISCLAIMS ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NONINFRINGEMENT. www.dialight.com MDTDLINX001_H DuroSite® LED Linear Fixture - UL / CSA for Indoor and Outdoor Industrial Applications