STEVAL-PCC012V1 Connectivity gateway demonstration board based on the STM32F107 Data brief Features ■ Offers Ethernet, USB OTG and generalpurpose extension connector ■ Two positions for optional Wi-Fi modules ■ A microSDTM card socket ■ Digital/analog extension connectors compatible with STEVAL-MKI0xxV1 MEMS extension boards and STEVAL-CCA021V1 audio extension board ■ Compatible with ST7590 “PRIME” board – narrow-band OFDM ■ JTAG interface for microcontroller firmware change/update ■ DC-DC power supply using the L7986A ■ Stand-alone demonstration firmware, on-board LEDs and joystick ■ RoHS compliant STEVAL-PCC012V1 Description The STEVAL-PCC012V1 demonstration board is equipped with an Ethernet interface, four digital/analog extension connectors (I2C, SPI, etc.), footprint positions for two different Wi-Fi modules, an OFDM PRIME power line networking extension connector and a microSD card socket with SPI interface. It also features a 5-way joystick, four general-purpose LEDs and two LEDs dedicated to the user interface. The demonstration board also includes digital/analog input/output connectors with pinouts compatible with other demonstration boards from STMicroelectronics. The STEVAL-PCC012V1 can be supplied from a standard DC power supply (7 - 35 VDC), or directly using a 24 VDC industrial mains supply. June 2010 Doc ID 17441 Rev 1 For further information contact your local STMicroelectronics sales office. 1/10 www.st.com 10 SB5 2/10 Doc ID 17441 Rev 1 # N&? 6 ,$ STM32F107_256K 2 2 12 pF C25 $ Boot option !6 X2 25 MHz CM5032 2 1 , R22 4ERMINALBLOCK 10k_0603 N&? 6/54 6/54 JP1 '.$ 3 6). OSC_I N OSC_OUT NRST NC BOOT0 5 ,$3 12 13 14 73 94 12 pF 5 &3762%& /54 6## &" 39.# '. $ #/-0 %. ) .( '. $ JRST RESET # 4 2 CS_WIF I BTN_CE BTN_ R BTN_ L BTN_DW BTN_UP LE D4 LE D3 CS_SDcard CS_MEMS SelfTest HP FS PD PE1 PE0 6 46 45 44 43 42 41 40 39 38 5 4 3 2 1 98 97 N& PE15 PE14 PE13 PE12 PE11 PE10 PE9 PE8 PE7 PE6 PE5 PE4 PE3 PE2 PE1 PE0 P& C20 # # 1 3 Power supply 2 Figure 1. 1 N& RXD_ 3 RXD_ 2 RXD_ 1 RXD_ 0 RXDV SPK_STBY DAC_STBY STBY_L STBY_R G1 G0 PD1 PD0 6 # LE D1 LE D2 $ # PD13 '-+! 62 61 60 59 58 57 56 55 88 87 86 85 84 83 82 81 WProtect In t2 In t1 DAC_SDAT F_AWAKE DAC_BCLK SCS_N SD_detect DAC_MCL K IN T_NX Voutz Vouty TXCLK TXD_ 2 MDC Voutx 0 # PD15 PD14 PD13 PD12 PD11 PD10 PD9 PD8 PD7 PD6 PD5 PD4 PD3 PD2 PD1 PD0 9 8 7 80 79 78 66 65 64 63 34 33 18 17 16 15 $ 3403,5 ! 6 PB0 PB1 PB2 PB3 PB4 PB5 PB6 PB7 PB8 PB9 PB10 PB11 PB12 PB13 PB14 PB15 PC15-OSC32_OUT PC14-OSC32_IN PC13-ANTI_TAMP PC12 PC11 PC10 PC9 PC8 PC7 PC6 PC5 PC4 PC3 PC2 PC1 PC0 Schematic diagram 3 35 36 37 89 90 91 92 93 95 96 47 48 51 52 53 54 out2 MICRO_OUT MICRO_SHDN JTDO JTRST SSN0 SCL SDA TXD_ 3 MDM_RES RXER TXEN TXD_ 0 TXD_ 1 USB_PowerSwitchOn USB_OverCurrent PA 0-WK UP PA 1 PA 2 PA 3 PA 4 PA 5 PA 6 PA 7 PA 8 PA 9 PA10 PA11 PA12 PA13 PA14 PA15 U1 A Figure 2. 23 24 25 26 29 30 31 32 67 68 69 70 71 72 76 77 CRS RXCL K_ MCU MDIO COL DAC_LRCLK SCK MISO MOSI MCO USB_VBUS USB_I D USB_DM USB_DP JTMS JTCK JTDI 1 4 JRST #. CERAMIC 6 X1 14.7456 MHz CM5032 JTRST Schematic diagram STEVAL-PCC012V1 $IFFERENT FREQUENCY 2 .! ./4% 6 # 3" 6 2 TANTAL #$% 6 2 34 3403,5 343-4! # N& 2 0OWERSUPPL Y 6 6 # 2 2ED !- STM32 - part 1 (inputs, outputs, clock, reset) AM00880 Doc ID 17441 Rev 1 DAC_FMT2 100nF_0603 C40 2 JP6 3 SDA 1 PE0P 100nF_0603 C21 DAC_FMT1 100nF_0603 C22 2 JP7 100nF_0603 C23 1 3 SC L E1 100nF_0603 C24 100_0603 100_0603 100_0603 100_0603 100_0603 R21 TN_R R20 BTN_ LB 100nF_0603 C19 R19 BTN_DW 10 nF RESE T RESET R18 10 nF C14 BTN_DW BTN_ R R48 10 nF C13 4 5 6 Reset dw L Joystick R up SW 1 20 19 49 74 99 27 10 BTN_UP 10 nF 10 nF C12 1 2 3 VREF – VSSA VSS_ 1 VSS_ 2 VSS_ 3 VSS_ 4 VSS_ 5 STM32F107_256K VREF + VDDA VDD_1 VDD_2 VDD_3 VDD_4 VDD_5 VBAT U1B 10 nF BTN_CE C11 C10 +3.3 V BTN_UP BTN_CE BTN_ L +3.3 V C6 10 nF 21 22 50 75 100 28 11 6 C1 Figure 4. C5 R2 VREF + 47R_0603 VDDA R14 R16 R11 +5.3 V VDDA STBY_R STBY_L DAC_STBY SPK _STBY MI CRO_SHDN MI CRO_OUT 2 4 6 8 10 12 14 16 18 20 680_0603 R15 680_0603 R9 2K2_0603 R3 Header 10 x 2 S 1 3 5 7 9 11 13 15 17 19 CN3 R5 680_0603 +3.3 V 2 4 6 8 10 12 14 16 18 20 LED1 LED3 LED2 LED4 GREEN 2 YELLOW 2 RED 2 YELLOW 2 +3.3 V +3.3 V +5.3 V G0 G1 DAC_LRCL K DAC_BCLK DAC_SDAT DAC_MCL K DAC_FMT2 DAC_FMT1 LD 4 1 LD 3 1 LD 2 1 LD1 1 GM: MLW20G 1 3 5 7 9 11 13 15 17 19 JTRST JTDI JTMS JTCK 10k_0603 JRTCK JTDO JRST 10k_0603 DBGRQ 10k_0603 DBGACK LEDs CN 1 +3.3 V +3.3 V Audio connector GND GND +5.3 V 5.3 V +3.3 V 3.3 V Test points JTAG Figure 3. C41 L1 BEAD +3.3 V STEVAL-PCC012V1 Schematic diagram STM32 - part 2 (JTAG, LEDs, audio extension connector) AM00881 STM32 - part 3 (joystick, analog decoupling, DAC_FMT signals) AM00884 3/10 4/10 Doc ID 17441 Rev 1 AN0 R39 AN0 RXCL K_ PHY CF1 MCOT CF 1 2 TXD_ 3 LPBK ADD4 ADD3 ADD2 ADD1 ADD0 SB3 SB2 SB1 CF 1 3 1 DVDD I/ O2 GND I/ O1 DVIULC6-2P6 I/ O2 VBUS I/ O1 U6 MCO DVDD DVDD 4 5 6 CF0 R36 R35 R34 R33 R31 R29 RDN_C_1 RDP_C_1 I/ O2 GND I/ O1 DVIULC6-2P6 I/ O2 VBUS I/ O1 U5 RXDV TXCL K RXD_3 RXD_2 RXD_1 RXD_0 COL Boot strap MII address 0x01 100 nF_0603 C28 VCCA TDN_C_1 4 5 6 RXCL K_ MCU RXCL K_ MCU CF 0 3 1 MII fit remove remove DVDD RDN_ 1 RDP_ 1 TDN_ 1 TDP_ 1 2 XD_ 2 CF 0 3 2 1 3 2 1 remove fit fit RMII Figure 6. 100 nF_0603 TDP_C_1 7 8 TXD_2 TXD_3 DVDD R45 6 VCCA 12 11 10 9 5 TXD_1 4 3 TXD_0 VCCA TXEN 2 TXCLK 1 44 43 42 41 40 39 38 RXER CRS R27 37 U8 ST802RT1 RXCLK_PHY RXDV LED_ACT/AN1 LED_SPEED/AN0 LED_LINK/AN_EN SDP RESET MDIO MDC OVDD GND X2 X1 DVDD RX_CLK RXDV/MII_CFG0 CRS/TXD4 RXERR/RXD4 SDN DVDD 48 DVDD RXD_3 14 15 RDP_1 RDN_1 13 17 TDP_1 16 18 R53 20 TDN_1 19 21 22 R52 23 VCCA 24 VCCA RXN RXP GNDA TXP TXN GNDA GNDA IREF VCCA GNDA VCCA GND RESERVED RESERVED PWRDWN/MDINT TXD3/MII_CFG1 TXD2/SCLK TXD1 TXD0 VCCA GNDA TX_EN TX_CLK /LPBK_EN GND COL/PHYADDR0 RXD0/PHYADDR1 RXD1/PHYADDR2 RXD2/PHYADDR3 RXD3/PHYADDR4 47 46 45 COL RXD_2 RXD_1 RXD_0 36 DVDD RESET 29 26 27 28 LED_ACT/AN1_1 AN0 LED_LI NK/AN_EN_1 R40 MDIO 30 25 MDC DVDD MCO 31 32 33 34 35 Figure 5. C27 VCCA Schematic diagram STEVAL-PCC012V1 Ethernet - part 1 (PHY pinout) AM00885 Ethernet - part 2 (overvoltage protection, PHY configuration) AM00886 STEVAL-PCC012V1 100 nF 100 nF 100 nF C32 C31 100 nF VCCA C30 100 nF C33 R DVDD MLS0805-4S4-300 L4 +3.3 V VCCA DVDD L3 LED_ACT/AN1_1 R41 8 MLS0805-4S4-300 C38 100 nF_0603 DVDD LED_LI NK/AN_EN_1 R44 R42 11 12 RD – 7 6 CT 5 RDN_C_1 RD + 3 RDP_C_1 VCCA TD – 2 TDN_C_1 VCCA DVDD R43 9 Yellow 1.414:1 CT 4 1.414:1 TD + TDP_C_1 1 Pulse: J00-0086 CN 5 Figure 8. C39 100 nF_0603 10 RX – RX + TX – TX + C34 Green R46 13 C35 14 C36 R 10 nF / 500 V C29 Ethernet - part 3 (magnetics) 8 7 6 5 4 3 2 1 Figure 7. Schematic diagram AM00887 USB-OTG +3.3 V +5.3 V 3 A, 40 V STPS 3L40U D5 +5.0 V SB 7 10K_0603 R23 2 5 4 R25 USB_PowerSwitchOn R24 0R_0603 USB_OverCurrent U4 GND IN EN FAULT OUT 3 1 D2 3 ST: STPS3L40U 3 A, 40 V low drop C26 0R_0603 STMPS2141STR 300R_060 R26 1 2 USB_VBUS USB_DM USB_DP +5.0 V +5.0 V CN 4 1 2 3 4 5 U7 R28 22R_0603 1 2 3 R30 22R_0603 USB_ID I/ O1 GND I/ O2 I/ O1 VBUS I/ O2 6 5 4 USBLC6-2P6 R32 LD 6 GREEN 0R_0603 VBUS DM DP ID GND USB_MiniAB receptacle 0 Shield USB-mini-socket AM00888 Doc ID 17441 Rev 1 5/10 6/10 Doc ID 17441 Rev 1 MISO INT_NX SC K MOSI SCS_N CS_WIFI JTGEN JTGEN +3.3 V 2 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 3 JP5 1 1 3 JP4 ZG2100M GND CE_N JTAG_EN DNC SCS_ N VDD_1.8 GND UART_RX UART_TX GND VDD_3.3 GND VDD_1.8 SDO *INT_NX SC K SD I GND ZG2100M U9 GND +3.3 V JTGR N GND VDD_3.3 RES DNC DNC DNC DNC VDD_1.8 GND JTAG_RSTN DNC RST_ N JTAG_TDI JTAG_TM S JTAG_TCK JTAG_TDO VDD_1.8 GND (ZG2101M) 2 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 +3.3 V +3.3 V R62 R61 R60 R49 RESET JTGRN WProtect +3.3 V SCK MOSI INT_NX Figure 9. 3-pin jumper resistor 3-pin jumper resistor Schematic diagram STEVAL-PCC012V1 Wi-Fi module-1 AM00889 Figure 10. Wi-Fi module-2 AM00890 STEVAL-PCC012V1 Schematic diagram Figure 11. MicroSD card -ICRO3$#ARD #. #3?3$#ARD 0*3 3-3& &OR3-3&& -/3) 3#+ -)3/ 3$?DETECT MICROCARD DETECTION 6 37 37 6 2 !- Figure 12. MEMS extension connectors 3#,?-%-3 3$!?-%-3 3# , 3$ ! 53!24?4 8 53!24?28 *0 *0 2 2? OUT MEMSREF 6 -/3) 6 #. 0$ 0$ 0$ 33. -$-?2%3 3$?DETECT 3#3? . 70ROTECT #3?7)&) 2 2? -)3/ #. (EADER X /54 / X/ 6REF X/ 6OUT X OUT 6OUTY MEMSREF 6OUT Z /54 OUT / 53!24?28 (0 -)3/ -/3) 3# + #3?-%-3 0$ &3 3ELF4EST )N T )N T 3$!?-%-3 3#,?-%-3 (EADER 53!24?48 #. 4X$ -)3/ -/3) RTS -$-?2%3 2X$ 6 33. #+ CTS DFU (EADER X !- Doc ID 17441 Rev 1 7/10 Power supply connectors CN2, P2 2 STEVAL-PCC012V1 Power supply connectors CN2, P2 Figure 13. Power supply connector CN2 !)6 Table 1. Power supply connector CN2 Pin Signal Pin Signal 1 24 VDC 3 GND 2 GND Figure 14. Power supply connector P2 !)6 Table 2. 8/10 Power supply connector P2 Pin Signal 1 24 VDC 2 GND Doc ID 17441 Rev 1 STEVAL-PCC012V1 3 Revision history Revision history Table 3. Document revision history Date Revision 15-Jun-2010 1 Changes Initial release. Doc ID 17441 Rev 1 9/10 STEVAL-PCC012V1 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 Doc ID 17441 Rev 1