MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For airbag module, 105℃ LBG Series ・For airbag application ・High capacitance, low impedance, and good low temperature behavior ・Endurance with ripple current : 5,000 hours at 105℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant ◆SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105℃ Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current 25 & 35Vdc (at 20℃, 120Hz) 1,000 to 11,000µF (at 20℃, 120Hz) 0 to +30% (A) I=0.01CV (at 20℃ after 2 minutes) Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) 25V 35V Rated voltage (Vdc) 0.20 0.16 tanδ (Max.) (at 20℃, 120Hz) When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. 25V 35V Rated voltage (Vdc) 3 3 Z(-55℃)/Z(+20℃) (at 120Hz) Impedance at -40℃ and 20℃ 100kHz in the STANDARD RATINGS The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105℃. Capacitance change ≦±20% of the initial value ≦200% of the initial specified value D.F. (tanδ) Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life ◆DIMENSIONS [mm] Code : E 18 φD 12.5 14.5 16 φd 0.6 0.8 0.8 0.8 F 5.0 7.5 7.5 7.5 φD' φD+0.5max. L' L+1.5max. φD' φd Sleeve (PET : Dark blue) F±0.5 ●Terminal L' Vent 15min. 4min. Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L BG AAA E AA AAA A AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 1,000µF:102, 11,000µF:113) Lead forming·taping code Terminal code Voltage code (ex. 16V:160, 35V:350) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 198 CAT. No. E1001N MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For airbag module, 105℃ LBGSeries ◆STANDARD RATINGS Cap (µF) φD×L(mm) 1,700 2,400 2,400 2,800 3,000 3,400 3,500 4,200 4,200 4,500 4,600 5,400 5,600 6,000 6,400 6,600 7,800 7,900 9,200 11,000 1,000 1,400 1,400 1,600 1,800 2,000 2,100 2,500 2,500 2,700 2,800 3,200 3,400 3,600 3,800 4,000 4,700 4,800 5,600 6,700 12.5 × 20 12.5 × 25 14.5 × 20 12.5 × 30 16 × 20 14.5 × 25 12.5 × 35 16 × 25 18 × 20 12.5 × 40 14.5 × 31.5 14.5 × 35.5 16 × 31.5 18 × 25 14.5 × 40 16 × 35.5 16 × 40 18 × 31.5 18 × 35.5 18 × 40 12.5 × 20 12.5 × 25 14.5 × 20 12.5 × 30 16 × 20 14.5 × 25 12.5 × 35 16 × 25 18 × 20 12.5 × 40 14.5 × 31.5 14.5 × 35.5 16 × 31.5 18 × 25 14.5 × 40 16 × 35.5 16 × 40 18 × 31.5 18 × 35.5 18 × 40 WV (Vdc) 25 35 Impedance (Ωmax/100kHz) Case size 20℃ -40℃ 0.057 0.045 0.051 0.039 0.044 0.041 0.033 0.033 0.042 0.027 0.032 0.028 0.026 0.030 0.025 0.023 0.021 0.024 0.022 0.020 0.057 0.045 0.051 0.039 0.044 0.041 0.033 0.033 0.042 0.027 0.032 0.028 0.026 0.030 0.025 0.023 0.021 0.024 0.022 0.020 0.29 0.23 0.26 0.20 0.22 0.21 0.17 0.17 0.21 0.14 0.16 0.14 0.13 0.15 0.13 0.12 0.11 0.12 0.11 0.10 0.29 0.23 0.26 0.20 0.22 0.21 0.17 0.17 0.21 0.14 0.16 0.14 0.13 0.15 0.13 0.12 0.11 0.12 0.11 0.10 Rated ripple current (mArms/105℃,100kHz) 1,700 2,000 2,000 2,300 2,250 2,400 2,700 2,600 2,500 3,100 2,700 3,100 3,200 2,800 3,400 3,500 3,800 3,500 3,700 4,000 1,700 2,000 2,000 2,300 2,250 2,400 2,700 2,600 2,500 3,100 2,700 3,100 3,200 2,800 3,400 3,500 3,800 3,500 3,700 4,000 Part No. ELBG250E□□172AK20S ELBG250E□□242AK25S ELBG250E□□242AU20S ELBG250E□□282AK30S ELBG250E□□302AL20S ELBG250E□□342AU25S ELBG250E□□352AK35S ELBG250E□□422AL25S ELBG250E□□422AM20S ELBG250E□□452AK40S ELBG250E□□462AUN3S ELBG250E□□542AUP1S ELBG250E□□562ALN3S ELBG250E□□602AM25S ELBG250E□□642AU40S ELBG250E□□662ALP1S ELBG250E□□782AL40S ELBG250E□□792AMN3S ELBG250E□□922AMP1S ELBG250E□□113AM40S ELBG350E□□102AK20S ELBG350E□□142AK25S ELBG350E□□142AU20S ELBG350E□□162AK30S ELBG350E□□182AL20S ELBG350E□□202AU25S ELBG350E□□212AK35S ELBG350E□□252AL25S ELBG350E□□252AM20S ELBG350E□□272AK40S ELBG350E□□282AUN3S ELBG350E□□322AUP1S ELBG350E□□342ALN3S ELBG350E□□362AM25S ELBG350E□□382AU40S ELBG350E□□402ALP1S ELBG350E□□472AL40S ELBG350E□□482AMN3S ELBG350E□□562AMP1S ELBG350E□□672AM40S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ●Frequency Capacitance (µF) Multipliers Frequency (Hz) 1,000 to 2,000 2,100 to 3,800 4,000 to 11,000 120 0.60 0.75 0.85 1k 0.87 0.90 0.95 10k 0.95 0.95 0.98 100k 1.00 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 199 CAT. No. E1001N