REVISIONS 2.0 • See Note 6 NO. DESCRIPTION DATE 1.5 +0.1/-0.0 DIA 4.0 • See Note 1 A 0.5 Radius Typical 1.75 0.30 ± 0.05 0.3 R MAX. 14.2 •See Note 6 3.0 (2) 15.5 Bo 28.4 32.0 K1 ± 0.3 2.00 MIN 16.0 Ko A Ao Section A-A 0.20 ± 0.05 0.75 R Notes: 1. 10 sprocket hole pitch cumulative tolerance 2. Camber not to exceed 1mm in 100mm 3. Material: Black Conductive Advantek Polystyrene 4. Ao and Bo measured on a plane 0.3mm above the bottom of the pocket 5. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier. 6. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. - All Dimensions in Millimeters - ± 0.2 Ao = 12.5mm Bo = 20.6mm Ko = 2.0mm K1 = 1.3mm TOLERANCES Advantek Part Number TSOP48-D TS 48 Carrier Tape, Taping Systems / AMD Tool (EXCEPT AS NOTED) A DECIMAL ± 0.1 SCALE FRACTIONAL DRAWN BY ± CHK'D DATE TRACED APP'D T.S. see Note 3 DRAWING NO. 7/8/94 ANGULAR ± MATERIAL 2:1 A0811-94-1 BY