4.0 ± 0.1 0.30 ± 0.05 • See Note 1 1.75 ± 0.1 2.0 ± 0.1 Note 6 1.5+0.1/-0.0 DIA. A 0.3 R MAX. 28.4 ± 0.1 14.2 ± 0.1 Note 6 32.0 ± 0.3 Bo Ko 0.5 RADIUS TYPICAL Ao = 18.0 mm Bo = 18.0 mm Ko = 4.9 mm A 24.0 ± 0.1 SECTION A-A Ao ± 0.1 ± 0.1 ± 0.1 Notes: 1. 10 sprocket hole pitch cumulative tolerance 2. Camber not to exceed 1mm in 100mm 3. Material: Conductive Black Advantek Polystyrene 4. Ao and Bo measured on a plane 0.3mm above the bottom of the pocket 5. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier. 6. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. 2.00 MIN. 0.20 ± 0.05 0.75 R ± 0.2 - All Dimensions in Millimeters REVISIONS TOLERANCES (EXCEPT AS NOTED) DECIMAL ± NO. 1 DESCRIPTION Drawing Number was A0103-89-5 DATE Advantek Part Number PLCC44-AC PLCC44 Carrier Tape BY 3/10/94 A T.S. 2 FRACTIONAL 3 DRAWN BY ± BJD SCALE CHK'D DATE TRACED APP'D 4 ± see Note 3 DRAWING NO. 12/29/88 ANGULAR 5 MATERIAL 2.5 mm = 1 mm A0310-94-1 1