ELM73xxxxxA CMOS Voltage detector with delay circuit and Manual Reset function ■General description ELM73xxxxxA is CMOS voltage detector IC with delay function; delay time is adjustable by external capacitor. It operates with very low current consumption; 260nA(typ.). The type with Manual Reset function is also available in ELM73xxxBxA series; reset condition can be manually asserted at any time. There are two output forms available; N-ch opendrain and CMOS output. The output logic is positive, therefore, the output becomes low level when VDD is lower than detection voltage. The standard detection voltages are 2.2V, 2.7V, 3.0V and 4.0V; ELM73 series can also be made as semi-custom IC within the range of 1.4~5.0V by 0.1V step. ■Features • Detection voltage range : 1.4V to 5.0V (by 0.1V step) • Low power operation : Typ.260nA(Vdd=VdetN+1V) • Accuracy of detection voltage : ±30mV (VdetN<2.5V) ±1.2% (VdetN≥2.5V) • Accuracy of delay time : Typ.15% (ExtC=4.7nF) • Hysteresis voltage : Typ.VdetN×1.04 • Manual reset input : MR pin (ELM73xxxBxA only, Built-in pull-up resistor) • Package : SC-82AB(SOT-343), SC-70-5(SOT-353), SOT-25 ■Application • • • • Reset for microcomputers Voltage power shortage detectors Switch of back up power source Battery checkers ■Maximum absolute ratings Parameter Power supply voltage Symbol Vdd Apply voltage to OUT pin Vout Apply voltage to ExtC pin Apply voltage to MR pin Output current VExtC Vmr Iout Power dissipation Operating temperature Storage temperature Limit Vss-0.3 to 7.0 N-ch : Vss-0.3 to 7.0 CMOS : Vss-0.3 to Vdd+0.3 Vss-0.3 to Vdd+0.3 Vss-0.3 to Vdd+0.3 100 250 (SOT-25) 150 (SC-82AB (SOT-343)) 150 (SC-70-5 (SOT-353)) -40 to +85 -55 to +125 Pd Top Tstg 16 - 1 Unit V V V V mA mW °C °C Rev.1.1 ELM73xxxxxA CMOS Voltage detector with delay circuit and Manual Reset function ■Selection guide ELM73xxxxxA-x Symbol a, b Detection voltage c Output form d Manual reset function e Package f g Product version Taping direction e.g. : 22: VdetN=2.2V, 27: VdetN=2.7V 30: VdetN=3.0V, 40: VdetN=4.0V N: N-ch open-drain output C: CMOS output A : Without MR function B : With MR function B: SOT-25 C: SC-82AB(SOT-343), SC-70-5(SOT-353) A S, N: Refer to PKG file ELM73 x x x x x A - x ↑ ↑ ↑ ↑ ↑ ↑ ↑ a b c d e f g ■Pin configuration SOT-25(TOP VIEW) 4 5 1 2 3 SOT-25(TOP VIEW) Pin No. 1 2 3 4 5 Pin name (73xxxABA) OUT VDD VSS NC ExtC SC-82AB(TOP VIEW) 4 5 1 2 3 Pin No. 1 2 3 4 5 Pin name (73xxxBBA) MR VSS VDD ExtC OUT SC-70-5(TOP VIEW) Pin No. 1 2 3 4 Pin name (73xxxACA) VSS VDD ExtC OUT Pin No. 1 2 3 4 5 16 - 2 Pin name (73xxxBCA) MR VSS VDD ExtC OUT Rev.1.1 ELM73xxxxxA CMOS Voltage detector with delay circuit and Manual Reset function ■Standard circuit • ELM73xxNAxA VDD • ELM73xxCAxA 100k VDD VDD OUT OUT OUT ExtC VSS Cex VSS VSS 100k VDD 100k ExtC ExtC Cex Cex VSS VDD VDD VDD OUT OUT OUT ExtC Cex VSS VSS Vref • ELM73xxNBxA VDD MR VSS VDD Vref + - ExtC ExtC + - • ELM73xxCBxA OUT ExtC 100k VDD VDD OUT OUT MR MR ExtC ExtC Cex VSS VSS Delay circuit OUT 100k VDD 100k VDD VDD OUT OUT OUT MR VSS MR MR ExtC ExtC ExtC VDD Cex Cex VSS Cex VSS VSS Vref + Delay VDD circuit Vref + Delay circuit - ■Block diagram ExtC •VSS ELM73xxNAxA Cex Cex OUT ExtC VSS • ELM73xxCAxA ExtC VDD Vref Vref + + - Delay circuit Delay circuit OUT VDD Vref + - Delay circuit Vref + - Delay circuit OUT ExtC VSS ExtC VSS Vref Vref + + - OUT OUT MR ExtC VSS ExtC VSS •VDD ELM73xxNBxA • ELM73xxCBxA VDD Delay circuit Delay circuit VDD OUT OUT MR ExtC VSS ExtC VSS VDD VDD ExtC OUT VSS VDD VDD OUT Delay circuit * If delay function is not required, Cex is not necessary. VDD Cex Cex Vref Vref + + - Delay circuit Delay circuit OUT OUT MR MR ExtC VSS ExtC VSS VDD Vref Vref + +- Delay circuit Delay circuit OUT 16 - 3 OUT MR MR Vref + - Delay circuit Rev.1.1 OUT MR ELM73xxxxxA CMOS Voltage detector with delay circuit and Manual Reset function ■Timing chart VDD • ELM73xxxAxA VdetP VdetN VDD Vhys VdetP VdetN Vhys VopMin Vss VopMin Vss OUT OUT Vss tPLH Vss tPHL tPLH tPHL • ELM73xxxBxA VDD VdetP VDD Vhys VdetNVdetP Vhys VdetN VMR VopMin VopMin Vss VMR Vss MR=Open MR=Open MR=Open MR=Open MR=VSS MR=VSS Vss Vss OUT OUT Vss Vss tPHL tPHL tPLH tPLH 16 - 4 tPLH tPLH Rev.1.1 ELM73xxxxxA CMOS Voltage detector with delay circuit and Manual Reset function ■Electrical characteristics ELM7322xxxA Parameter Detection voltage Symbol VdetN Hysteresis width Vhys Current consumption Power voltage Iss Vdd IoutN1 Output current IoutN2 IoutP*2 Leakage current Ileak tPLH Delay time tPHL MR voltage High VmrH MR voltage Low VmrL MR pull-up resistance Rmr Temperature ΔVdetN characteristic of VdetN ΔTop Condition Min. Typ. Max. 2.170 2.200 2.230 VdetN× VdetN× VdetN× 0.02 0.04 0.08 Vdd=3.2V 0.26 0.80 0.8 6.0 Vdd=0.8V, Vds=0.4V 0.01 0.50 Vdd=1.0V, Vds=0.4V 0.50 2.50 Vdd=3.0V, Vds=0.4V 0.60 1.90 Vdd=VLX=6.0V 0.1 3 Vdd=1.0V to 3.2V, Cex=4.7nF 22.1 26.0* 29.9 Vdd=3.2V to 1.0V 30 Vdd=6.0V 1.2 Vdd=2.7V 0.3 Vdd=3.2V 1 3 6 ±30 Top=25°C Unit Note*1 V 1 V 1 μA V 2 1 mA 3-(1) mA μA ms μs V 3-(2) 4 5 MΩ 6 6 7 ppm/°C * 1. Note: test circuit No., 2. IoutP is only applied to CMOS output products. 3. tPLH(typ.) is derived by using Cex from the following formula: tPLH(typ.)[ms]=5.532×Cex[nF]. ELM7327xxxA Parameter Detection voltage Symbol VdetN Hysteresis width Vhys Current consumption Power voltage Iss Vdd IoutN1 Output current IoutN2 IoutP*2 Leakage current Ileak tPLH Delay time tPHL MR voltage High VmrH MR voltage Low VmrL MR pull-up resistance Rmr ΔVdetN Temperature characteristic of VdetN ΔTop Condition Min. Typ. Max. 2.668 2.700 2.732 VdetN× VdetN× VdetN× 0.02 0.05 0.08 Vdd=3.7V 0.26 0.80 0.8 6.0 Vdd=0.8V, Vds=0.4V 0.01 0.50 Vdd=1.0V, Vds=0.4V 0.50 2.50 Vdd=4.5V, Vds=0.4V 0.80 2.30 Vdd=VLX=6.0V 0.1 Vdd=1.0V to 3.7V, Cex=4.7nF 22.1 26.0*3 29.9 Vdd=3.7V to 1.0V 30 Vdd=6.0V 1.2 Vdd=3.2V 0.3 Vdd=3.7V 1 3 6 ±30 Unit V Top=25°C Note*1 1 V 1 μA V 2 1 mA 3-(1) mA μA ms μs V 3-(2) 4 MΩ 5 6 6 7 ppm/°C * 1. Note: test circuit No., 2. IoutP is only applied to CMOS output products. 3. tPLH(typ.) is derived by using Cex from the following formula: tPLH(typ.)[ms]=5.532×Cex[nF]. 16 - 5 Rev.1.1 ELM73xxxxxA CMOS Voltage detector with delay circuit and Manual Reset function ELM7330xxxA Parameter Detection voltage Symbol VdetN Hysteresis width Vhys Current consumption Power voltage Iss Vdd IoutN1 Output current IoutN2 IoutP*2 Leakage current Ileak tPLH Delay time tPHL MR voltage High VmrH MR voltage Low VmrL MR pull-up resistance Rmr Temperature ΔVdetN characteristic of VdetN ΔTop Condition Min. Typ. Max. 2.964 3.000 3.036 VdetN× VdetN× VdetN× 0.02 0.06 0.08 Vdd=4.0V 0.26 0.80 0.8 6.0 Vdd=0.8V, Vds=0.4V 0.01 0.50 Vdd=1.0V, Vds=0.4V 0.50 2.50 Vdd=4.5V, Vds=0.4V 0.80 2.30 Vdd=VLX=6.0V 0.1 Vdd=1.0V to 4.0V, Cex=4.7nF 22.1 26.0*3 29.9 Vdd=4.0V to 1.0V 30 Vdd=6.0V 1.2 Vdd=3.5V 0.3 Vdd=4.0V 1 3 6 ±30 Top=25°C Unit Note*1 V 1 V 1 μA V 2 1 mA 3-(1) mA μA ms μs V 3-(2) 4 MΩ 5 6 6 7 ppm/°C * 1. Note: test circuit No., 2. IoutP is only applied to CMOS output products. 3. tPLH(typ.) is derived by using Cex from the following formula: tPLH(typ.)[ms]=5.532×Cex[nF]. ELM7340xxxA Parameter Detection voltage Symbol VdetN Hysteresis width Vhys Current consumption Power voltage Iss Vdd IoutN1 Output current IoutN2 IoutP*2 Leakage current Ileak tPLH Delay time tPHL MR voltage High VmrH MR voltage Low VmrL MR pull-up resistance Rmr ΔVdetN Temperature characteristic of VdetN ΔTop Condition Min. Typ. Max. 3.952 4.000 4.048 VdetN× VdetN× VdetN× 0.02 0.06 0.08 Vdd=5.0V 0.26 0.80 0.8 6.0 Vdd=0.8V, Vds=0.4V 0.01 0.50 Vdd=1.0V, Vds=0.4V 0.50 2.50 Vdd=4.5V, Vds=0.4V 0.80 2.30 Vdd=VLX=6.0V 0.1 3 Vdd=1.0V to 5.0V, Cex=4.7nF 22.1 26.0* 29.9 Vdd=5.0V to 1.0V 30 Vdd=6.0V 1.2 Vdd=4.5V 0.3 Vdd=5.0V 1 3 6 ±30 Top=25°C Unit Note*1 V 1 V 1 μA V 2 1 mA 3-(1) mA μA ms μs V 3-(2) 4 MΩ 5 6 6 7 ppm/°C * 1. Note: test circuit No., 2. IoutP is only applied to CMOS output products. 3. tPLH(typ.) is derived by using Cex from the following formula: tPLH(typ.)[ms]=5.532×Cex[nF]. 16 - 6 Rev.1.1 ELM73xxxxxA CMOS Voltage detector with delay circuit and Manual Reset function ■Test circuits 1) Detection voltage 2) Current consumption VDD VDD VDD VDD A AA A R* R*R* R* OUT OUT OUT OUT VDD VDD MR MR VDD VDDMR MRELM73xxxxxA VdetN VdetN ELM73xxxxxA VdetN ELM73xxxxxA ELM73xxxxxAExtC ExtC ExtC ExtC VdetN 3V 3V3V 3V V V V V VSS VSS VSS VSS VDD VDD VDD VDD OUT OUT OUT OUT MR MR MR MRELM73xxxxxA ELM73xxxxxA ExtC ELM73xxxxxA ELM73xxxxxAExtC ExtC ExtC VSS VSS VSS VSS ** Pull ** Pull up circuit circuit is is for N-ch N-ch output output only. only. Pull Pull upup up circuit circuit is necessary necessary is necessary necessary forfor for N-ch N-ch output output only. only. min min measurement. measurement. R=100kΩ(R=1MΩ R=100kΩ(R=1MΩ for Vdd Vdd min min measurement. measurement. R=100kΩ(R=1MΩ R=100kΩ(R=1MΩ forfor for Vdd Vdd 3)-(1) Output current (N-ch) VDD VDD VDD VDD 3)-(2) Output current (P-ch) VDD VDD VDD VDD OUT OUT OUT OUTAA VDD VDD MR AA VDD VDDMR MR MRELM73xxxxxA ELM73xxxxxA ExtC ExtC ELM73xxxxxA ELM73xxxxxAExtC ExtC VDD VDD VDD VDD VDS VDS VDS VDS OUT OUT OUT OUT VDD VDD MR VDD VDDMR MR MRELM73xxxxxA ELM73xxxxxA ExtC ELM73xxxxxA ELM73xxxxxAExtC ExtC ExtCAA VDS VDS VDS VDS AA VSS VSS VSS VSS VSS VSS VSS VSS 4) Leakage current 5) Delay time VDD VDD VDD VDD A AA A OUT OUT OUT OUT VDD VDD MR VDD VDDMR MR MRELM73xxxxxA ELM73xxxxxA ExtC ExtC ELM73xxxxxA ELM73xxxxxAExtC ExtC VSS VSS VSS VSS VDD VDD VDD VDD 1MΩ 1MΩ 1MΩ 1MΩ OUT OUT OUT OUT MR MR 3V MR MRELM73xxxxxA ELM73xxxxxAExtC 3V3V 3V ExtC ELM73xxxxxA ELM73xxxxxA ExtC ExtC * * 1.0V 1.0V * P.G * 1.0V 1.0V P.G P.GP.G 4.7nF 4.7nF VSS VSS 4.7nF 4.7nF VSS VSS ** ** Input Input pulse pulse VSS VSS **** Input Input pulse pulse VSS VSS VdetN+1V VdetN+1V VdetN+1V VdetN+1V * * up circuit circuit is is for N-ch N-ch output output only. only. * Pull Pull * Pull Pull upup up circuit circuit is necessary necessary is necessary necessary forfor for N-ch N-ch output output only. only. 6) MR voltage 7) MR pull-up resistance VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD VDD V VV V 100kΩ 100kΩ 100kΩ 100kΩ OUT OUT OUT OUT MR MR MR MRELM73xxxxxA ELM73xxxxxA ExtC ELM73xxxxxA ELM73xxxxxAExtC ExtC ExtC 3V3V 3V 3V V V V V Vmr Vmr Vmr Vmr VSS VSS VSS VSS ** Pull ** Pull up circuit circuit is is for N-ch N-ch output output only. only. Pull Pull upup up circuit circuit is necessary necessary is necessary necessary forfor for N-ch N-ch output output only. only. VDD VDD VDD VDD OUT OUT OUT OUT MR MR MR MRELM73xxxxxA ELM73xxxxxA ExtC ELM73xxxxxA ELM73xxxxxAExtC ExtC ExtC V VV V Vmr Vmr Vmr Vmr VSS VSS VSS VSS 100kΩ 100kΩ 100kΩ 100kΩ 3V 3V3V 3V V VV V * * up circuit circuit is is for N-ch N-ch output output only. only. * Pull Pull * Pull Pull upup up circuit circuit is necessary necessary is necessary necessary forfor for N-ch N-ch output output only. only. 16 - 7 Rev.1.1 ELM73xxxxxA CMOS Voltage detector with delay circuit and Manual Reset function ■Marking • SOT-25 package SOT-25 a, b : Represents “Output type” , “Manual Reset function” and “Detection voltage range”. Symbol Output type Manual reset function Vdet range(V) 78 1.4 to 3.0 Without MR function 79 3.1 to 5.0 CMOS 7A 1.4 to 3.0 With MR function 7B 3.1 to 5.0 7C 1.4 to 3.0 Without MR function 7D 3.1 to 5.0 Nch 7E 1.4 to 3.0 With MR function 7F 3.1 to 5.0 c : Represents “Detection voltage”. Symbol Detection voltage(V) Symbol Detection voltage(V) 1 3.1 F 1.6 4.6 2 3.2 G 1.7 4.7 3 3.3 H 1.8 4.8 4 3.4 J 1.9 4.9 5 3.5 K 2.0 5.0 6 3.6 L 2.1 7 3.7 M 2.2 8 3.8 N 2.3 9 3.9 P 2.4 0 4.0 Q 2.5 A 4.1 R 2.6 B 4.2 S 2.7 C 4.3 T 2.8 D 1.4 4.4 U 2.9 E 1.5 4.5 V 3.0 d : Represents “Assembly lot number”. Symbol 1 to 0 and A to Z repeated (I, O, X excepted) 16 - 8 Rev.1.1 ELM73xxxxxA CMOS Voltage detector with delay circuit and Manual Reset function • SC-70-5, SC-82AB package SC-70-5 SC-82AB a : Represents “Output type” and “Detection voltage range”. Symbol Output type Vdet range(V) H 1.4 to 3.0 CMOS J 3.1 to 5.0 K 1.4 to 3.0 Nch L 3.1 to 5.0 b : Represents “Detection voltage”. Symbol Detection voltage(V) Symbol Detection voltage(V) 1 3.1 F 1.6 4.6 2 3.2 G 1.7 4.7 3 3.3 H 1.8 4.8 4 3.4 J 1.9 4.9 5 3.5 K 2.0 5.0 6 3.6 L 2.1 7 3.7 M 2.2 8 3.8 N 2.3 9 3.9 P 2.4 0 4.0 Q 2.5 A 4.1 R 2.6 B 4.2 S 2.7 C 4.3 T 2.8 D 1.4 4.4 U 2.9 E 1.5 4.5 V 3.0 c : Represents “Assembly lot number”. Symbol 1 to 0 and A to Z repeated (I, O, X excepted) 16 - 9 Rev.1.1 ELM73xxxxxA CMOS Voltage detector with delay circuit and Manual Reset function ■Current consumption characteristics • VdetN=2.2V (ELM7322xxxA) • VdetN=2.7V (ELM7327xxxA) Iss-Vdd 0.6 0.5 +85°C 0.4 Iss (��� Iss (��� 0.5 +25°C 0.3 -40°C 0.2 1.0 2.0 3.0 Vdd (V) 4.0 5.0 0 0 6.0 -40°C 1.0 2.0 3.0 Vdd (V) 4.0 5.0 6.0 • VdetN=4.0V (ELM7340xxxA) Iss-Vdd 0.6 Iss-Vdd 0.6 0.5 0.5 0.4 +85°C Iss (��� Iss (��� +25°C 0.3 0.1 • VdetN=3.0V (ELM7330xxxA) +25°C 0.3 0.2 -40°C 0.1 0 0 +85°C 0.4 0.2 0.1 0 0 Iss-Vdd 0.6 1.0 2.0 3.0 Vdd (V) 4.0 5.0 0.4 0.3 +85°C 0.2 +25°C 0.1 -40°C 0 0 6.0 1.0 2.0 3.0 Vdd (V) 4.0 5.0 6.0 ■Detection voltage characteristics • VdetN=2.2V (ELM7322xxxA) • VdetN=2.7V (ELM7327xxxA) Vdet-Top 2.36 2.34 2.86 2.32 2.84 VdetP Vdet (V) Vdet (V) 2.28 2.26 2.24 3.20 -20 0 20 40 Top (°C) 60 2.74 Vdet-Top 2.66 -40 80 VdetN -20 0 20 40 Top (°C) 60 80 • VdetN=4.0V (ELM7340xxxA) 16 - 10 4.32 4.28 VdetP 4.24 ) 3.16 ) 2.76 2.68 • VdetN=3.0V (ELM7330xxxA) 3.24 2.78 2.70 2.18 2.16 -40 2.80 2.72 VdetN 2.20 VdetP 2.82 2.30 2.22 Vdet-Top 2.88 4.20 Vdet-Top VdetP Rev.1.1 Vdet (V) Vdet (V) 2.28 2.26 2.24 2.22 2.80 2.78 2.76 2.74 2.72 VdetN VdetN 2.70 CMOS Voltage detector with 2.68 delay circuit and Manual Reset function ELM73xxxxxA 2.18 2.20 2.16 -40 -20 0 20 40 60 Top (°C) 2.66 -40 80 • VdetN=3.0V (ELM7330xxxA) 3.20 4.28 VdetP 40 60 80 VdetP 4.24 Vdet (V) Vdet (V) 20 Top (°C) Vdet-Top 4.32 3.16 3.12 3.08 4.20 4.16 4.12 4.08 3.04 4.04 VdetN 3.00 2.96 -40 0 • VdetN=4.0V (ELM7340xxxA) Vdet-Top 3.24 -20 VdetN 4.00 -20 0 20 40 60 Top (°C) 3.96 -40 80 -20 0 20 40 60 Top (°C) 80 ■N-ch output current characteristics IoutN-Vds 1.6 1.4 Top=25°C IoutN (mA) IoutN (mA) 1.5 1.0 0.6 Vds=0.4V Vdd=0.9V 1.2 0.8 IoutN-Top 2.0 Vdd=0.8V 0.4 Vdd=0.9V 1.0 0.5 Vdd=0.8V 0.2 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 -40 Vds (V) 18.0 IoutN-Vds Top=25°C Vdd=1.2V 6.0 4.0 40 60 80 Vds=0.4V Vdd=1.5V 10.0 8.0 Vdd=1.2V 6.0 4.0 Vdd=1.0V Vdd=1.0V 2.0 2.0 0 0 20 Top (°C) 12.0 IoutN (mA) IoutN (mA) 10.0 8.0 14.0 Vdd=1.5V 12.0 0 IoutN-Top 16.0 16.0 14.0 -20 0 -40 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Vds (V) 16 - 11 -20 0 20 40 Top (°C) 60 80 Rev.1.1 ELM73xxxxxA CMOS Voltage detector with delay circuit and Manual Reset function ■P-ch output current characteristics (ELM73xxCxxA) IoutP-Vds 20.0 Top=25°C 18.0 Vds=0.4V 3.0 16.0 14.0 Vdd=4.5V IoutP (mA) IoutP (mA) IoutP-Top 3.5 12.0 10.0 8.0 Vdd=3.0V 6.0 Vdd=4.5V 2.5 2.0 Vdd=3.0V 1.5 1.0 4.0 0.5 2.0 0 -40 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 Vds (V) -20 0 20 40 Top (°C) 60 80 ■Delay time characteristics • VdetN=2.2V (ELM7322xxxA) tPLH-Supply voltage tPLH-Top Cex=4.7nF, Vdd=1.0V � 3.2V 30.0 29.0 29.0 28.0 28.0 tPLH (ms) tPLH (ms) 30.0 27.0 26.0 25.0 23.0 104 20 40 Top (°C) 60 22.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 80 Supply voltage (V) tPLH-Cex tPHL-Top Vdd=1.0V � 3.2V, Top=25°C 150 tPHL (�s) tPLH (ms) Cex=4.7nF, Vdd=3.2V � 1.0V 200 103 102 101 100 0 10 +25°C 25.0 23.0 0 -40°C 26.0 24.0 -20 +85°C 27.0 24.0 22.0 -40 Cex=4.7nF, Vdd=1.0V � Supply voltage 100 50 101 Cex (nF) 102 0 -40 103 16 - 12 -20 0 20 40 Top (°C) 60 80 Rev.1.1 ELM73xxxxxA CMOS Voltage detector with delay circuit and Manual Reset function • VdetN=2.7V (ELM7327xxxA) tPLH-Supply voltage tPLH-Top Cex=4.7nF, Vdd=1.0V � 3.7V 30.0 29.0 29.0 28.0 28.0 tPLH (ms) tPLH (ms) 30.0 27.0 26.0 25.0 25.0 23.0 23.0 0 20 40 Top (°C) 60 22.0 2.5 80 3.0 3.5 4.0 4.5 5.0 5.5 Supply voltage (V) tPLH-Cex 6.0 tPHL-Top Vdd=1.0V � 3.7V, Top=25°C 104 Cex=4.7nF, Vdd=3.7V � 1.0V 200 103 150 tPHL (�s) tPLH (ms) -40°C +25°C 26.0 24.0 -20 +85°C 27.0 24.0 22.0 -40 Cex=4.7nF, Vdd=1.0V � Supply voltage 102 101 100 50 100 0 10 101 Cex (nF) 102 0 -40 103 -20 0 20 40 Top (°C) 60 80 • VdetN=3.0V (ELM7330xxxA) tPLH-Top 30.0 29.0 29.0 28.0 28.0 tPLH (ms) tPLH (ms) tPLH-Supply voltage Cex=4.7nF, Vdd=1.0V � 4.0V 30.0 27.0 26.0 25.0 23.0 104 20 40 Top (°C) 60 22.0 3.0 80 +25°C 25.0 23.0 0 -40°C 26.0 24.0 -20 +85°C 27.0 24.0 22.0 -40 Cex=4.7nF, Vdd=1.0V � Supply voltage 3.5 4.0 4.5 5.0 Supply voltage (V) 5.5 6.0 tPHL-Top tPLH-Cex Vdd=1.0V � 4.0V, Top=25°C 160 Cex=4.7nF, Vdd=4.0V � 1.0V 140 2 10 16 - 13 tPHL (�s) tPLH (ms) 103 120 100 80 60 Rev.1.1 27.0 tPLH ( tPLH ( 27.0 26.0 25.0 24.0 +25°C 26.0 25.0 24.0 23.0 CMOS Voltage detector with 23.0 delay circuit and Manual Reset function ELM73xxxxxA 22.0 -40 -20 0 20 40 Top (°C) 60 22.0 3.0 80 3.5 4.0 tPLH-Cex 5.0 5.5 6.0 tPHL-Top Vdd=1.0V � 4.0V, Top=25°C 104 4.5 Supply voltage (V) Cex=4.7nF, Vdd=4.0V � 1.0V 160 140 120 tPHL (�s) tPLH (ms) 103 2 10 1 10 100 80 60 40 20 0 10 100 101 Cex (nF) 102 0 -40 103 -20 0 20 40 60 Top (°C) 80 • VdetN=4.0V (ELM7340xxxA) tPLH-Top 30.0 29.0 29.0 28.0 28.0 tPLH (ms) tPLH (ms) tPLH-Supply voltage Cex=4.7nF, Vdd=1.0V � 5.0V 30.0 27.0 26.0 25.0 23.0 104 20 40 Top (°C) 60 22.0 4.0 80 4.5 5.0 5.5 Supply voltage (V) tPLH-Cex 6.0 tPHL-Top Vdd=1.0V � 5.0V, Top=25°C Cex=4.7nF, Vdd=5.0V � 1.0V 120 100 tPHL (�s) 103 tPLH (ms) +25°C 25.0 23.0 0 -40°C 26.0 24.0 -20 +85°C 27.0 24.0 22.0 -40 Cex=4.7nF, Vdd=1.0V � Supply voltage 102 80 60 40 101 20 100 0 10 101 Cex (nF) 102 0 -40 103 16 - 14 -20 0 20 40 Top (°C) 60 80 Rev.1.1 ELM73xxxxxA CMOS Voltage detector with delay circuit and Manual Reset function ■MR voltage characteristics (ELM73xxxBxA) VmrH-Vdd 0.9 -40°C VmrL (V) VmrH (V) 0.8 0.7 0.6 +25°C 0.5 +85°C 0.4 1.0 VmrL-Vdd 0.9 0.8 -40°C 0.7 +25°C 0.6 +85°C 0.5 0.4 2.0 3.0 4.0 5.0 Vdd (V) 0.3 1.0 6.0 2.0 3.0 VmrH-Top 6.0 0.9 0.8 0.8 Vdd=4.5V Vdd=6.0V VmrL (V) VmrH (V) 5.0 VmrL-Top 0.9 0.7 0.6 Vdd=3.0V -20 0 20 40 Top (°C) Vdd=4.5V Vdd=6.0V 0.7 0.6 0.5 Vdd=1.5V 0.5 0.4 -40 4.0 Vdd (V) Vdd=3.0V Vdd=1.5V 0.4 60 0.3 -40 80 -20 0 20 40 Top (°C) 60 80 ■MR pull-up resistance characteristics (ELM73xxxBxA) Rmr-Top 5.0 Rmr (M�� 4.0 3.0 2.0 1.0 0 -40 -20 0 20 40 Top (°C) 60 80 IleakN-Vout 5.0 16 - 15 4.0 (nA) nA) 4.0 3.0 5.0 3.0 IleakN-Top Rev.1.1 Rm 2.0 1.0 0 with delay circuit and Manual Reset function ELM73xxxxxA -40 -20 CMOS 0 20 Voltage 40 60 detector 80 Top (°C) ■N-ch output leakage current characteristics (ELM73xxNxxA) 5.0 4.0 4.0 IleakN (nA) IleakN (nA) IleakN-Vout 5.0 3.0 +85°C 2.0 3.0 Vout=6.0V 2.0 Vout=4.5V 1.0 1.0 0 0 IleakN-Top 1.0 2.0 -40°C, +25°C 3.0 4.0 5.0 Vout (V) 0 -40 6.0 16 - 16 Vout=3.0V -20 0 20 40 Top (°C) 60 80 Rev.1.1