P R OP R IE T AR Y NOT E T HIS S P E C IF IC AT ION IS T HE P R OP E R T Y OF B OE HY DIS AND S HALL NOT B E R E P R ODUC E D OR C O P IE D W IT HOUT T HE W R IT T E N P E R MIS S ION OF B OE HY DIS AND MUS T B E R E T UR NE D T O B OE HY DIS UP ON IT S R E QUE S T T I T LE : H V 1 3 3 W X 1 - 1 0 0 P r oduct S pecifica tion R ev. 0 FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 Http://www.AZDISPLAYS.com B OE H Y DI S T E CH N OL OG Y S P E C . NUMB E R S 864-1360 B2005-C001-A (1/3) PRODUCT GROUP TFT LCD R E V. 0 IS S UE DAT E 2008.05.28 P AG E 1 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 DATE PREPARED 08.05.28 H.S. KIM REVISION HISTORY REV. ECN NO. 0 SPEC. NUMBER S864-1360 B2005-C001-A (2/3) DESCRIPTION OF CHANGES Initial Release SPEC TITLE HV133WX1-100 Product Specification PAGE 2 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 Contents No Item Page 1.0 General Description 4 2.0 Absolute Maximum Ratings 6 3.0 Electrical Specifications 7 4.0 Optical Specifications 9 5.0 Interface Connections 14 6.0 Signal Timing Specifications 17 7.0 Signal Timing Waveforms 17 8.0 Input Signals, Basic Display Colors & Gray Scale of Colors 19 9.0 Power Sequence 20 10.0 Mechanical Characteristics 21 11.0 Mechanical Drawing 22 12.0 Reliability Test 25 13.0 Handling & Cautions 26 14.0 Labels 27 15.0 Packing Information 29 16.0 EDID Table 30 SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 3 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 1.0 GENERAL DESCRIPTION 1.1 Introduction HV133WX1-100 is a color active matrix TFT LCD module using amorphous silicon TFT's (Thin Film Transistors) as an active switching devices. This module has a 13.3 inch diagonally measured active area with WXGA resolutions (1280 horizontal by 800 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical Stripe and this module can display 262,144 colors. The TFT-LCD panel used for this module is a low reflection and higher color type. LVDS Rx + T/CON 1 (CN Connector Gate Driver LVDS Input Signal TFT LCD Panel 1280 ശ800 BACK LIGHT (Fluorescent Lamp) DC/DC Gamma Vcom VDD 1 Source Driver ) HVDD VDIM/ VSW LED Driver Back Light (SMD LED Array) CN2 1.2 Features Thin and Light Weight 3.3 V Logic Power Supply 12V iTGwGz 1 Channel LVDS Interface SMD LED (54EA) Array (Bottom Side/Horizontal Direction) 262,144 Colors Data Enable Signal Mode vGiGlkpkG Side Mounting Frame Green Product (RoHS) SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 4 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 1.3 Application Tablet PC (Wide type) 1.4 General Specifications Parameter Specification Active area 286.08(H) ശ178.80(V) Number of pixels 1280(H) ശ800(V) Pixel pitch 0.2235(H) ശ0.2235(V) Pixel arrangement RGB Vertical Stripe Display colors 262,144 Display mode Normally Black Outline dimension 301.4±0.3(H) ശ196.5±0.3(V) ശ6.5(D:Max.) Weight 275(Typ.) ധ 10 Back-light SMD LED Array (54EA : 9 series X 6 parallel) Unit Remarks mm pixels mm colors mm Note 1 g Note 2 Note 1 : at PCB side Note 2 : without digitizer SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 5 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 2.0 ABSOLUTE MAXIMUM RATINGS The followings are maximum values which, if exceed, may cause faulty operation or damage to the unit. Ta=25+/-2¶C Parameter Symbol Min. Max. Unit Logic Power Supply Voltage VDD -0.3 4.0 V Logic Power Supply Voltage VIN -0.3 VDD+0.3 V HVDD -0.3 25 V ILED ILED - 30 20 mA mA VR - 5 V Operating Temperature TOP 0 +50 ଇ Storage Temperature TSP -20 +60 ଇ Back-light Power Supply Voltage Back-light LED Current + 25 ଇ + 50 ଇ Back-light LED Reverse Voltage Remarks Note 1 Note 1, Note 2 Note 1. Ambient temperature vs maximum forward current are shown in the figure below. Note 2. Temperature and relative humidity range are shown in the figure below. 90% RH Max. ( 40ఁ Ta) Maximum wet - bulb temperature at 39 or less. ( > 40ఁ) No condensation. Relative Humudity 100 Ambient Temperature vs Maximum Forward Current (40, 90) 90 80 60 O\WSYWP Operating Range (50, 50) 40 (60, 27) 20 Storage Range 5 -40 -20 0 20 40 60 80 Temperature (ఁ ఁ) SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 6 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 3.0 ELECTRICAL SPECIFICATIONS 3.1 Electrical Specifications < Table 3. Electrical Specifications > Parameter Min. Typ. Max. Unit Remarks Logic Power Supply Voltage VDD 3.0 3.3 3.6 V Note 1 Logic Power Supply Current IDD - 360 550 mA Note 1 Back-light Power Supply Voltage HVDD 5.0 12.0 21.0 V Note 2 Back-light Power Supply Current IHVDD - 271 325 mA Note 2, 3 Back-light Power Consumption PBL - 3.25 3.90 W Note 2, 3 Power Consumption (EBL) PEBL - 1.85 1.98 W Note 1, 2, 3 ഗ 80 85 - % Note 2, 3 Back-light PWM Frequency FPWM 200 280 350 High Level PWM Signal Voltage VPWMH 2.2 3.3 5.0 V Low Level PWM Signal Voltage VPWML - 0 0.2 V High Level Differential Input Signal Voltage VIH - - +100 mV VCM = 1.2V Low Level Differential Input Signal Voltage VIL -100 - - mV VCM = 1.2V Back-light LED Voltage / Back-light LED Total Voltage VLED /VBL - 3.2 / 28.8 3.6 /32.4 V Note 4 Back-light LED Current / Back-light LED Total Current ILED /IBL - 16.0 / 96.0 16.8 /100.8 mA Note 4 12,000 - - Hrs Based on LED 25’c, ILED=16mA PD - 1.2 1.82 W Note 1 PLED - 2.76 3.27 W Note 4 Ptotal - 3.96 5.09 W Note 1, 4 LED Driver’s Efficiency Life Time Power Consumption Notes : 1. The supply voltage is measured and specified at the interface connector of LCM. The current draw and power consumption specified is for 3.3V at 25ଇ. a) Typ : Window XP pattern, b) Max : Skip Sub Pixel c) EBL : Mosaic pattern ( 32 X 32 ) 2. The power supply voltage and current is measured and specified at the interface connector of LCM including LED Driver. 3. Reference value, which is measured with LED Driver for 12V. 4. Reference value, which is measured without LED Driver. 5. Calculated value for reference (VLED ശ ILED Ý # of LEDs (54EA) ). SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 7 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 3.2 PWM Duty Ratio vs Brightness 100 90 Relative Brightness (%) 80 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 100 Duty Ratio (%) Notes : In case of duty ratio 0%, LED can’t illuminate itself so this state is LED off. In case of duty ratio 100%, the brightness of LED is maximum and the state is LED on. SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 8 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 4.0 OPTICAL SPECIFICATIONS 4.1 Overview The test of optical specifications shall be measured in a dark room (ambient luminance ≤ 1 lux and temperature = 25±2ଇ) with the equipment of Luminance meter system (Goniometer system and TOPCON BM-5A) and test unit shall be located at an approximate distance 50cm from the LCD surface at a viewing angle of ഘ and equal to 0°. We refer to ഘØ=0 (=ഘ3 ) as the 3 o’clock direction (the “right”), ഘØ=90 (= ഘ12 ) as the 12 o’clock direction (“upward”), ഘØ=180 (= ഘ9 ) as the 9 o’clock direction (“left”) and ഘØ=270(= ഘ6 ) as the 6 o’clock direction (“bottom”). While scanning ഘ and/or Ø, the center of the measuring spot on the Display surface shall stay fixed. The backlight should be operating for 30 minutes prior to measurement. VDD shall be 3.3+/- 0.3V at 25°C. Optimum viewing angle direction is 6 o’clock. 4.2 Optical Specifications <Table 4. Optical Specifications> Parameter Symbol Horizontal Viewing Angle range Luminance Contrast ratio Luminance of 1 Point White White 5 Points Luminance 13 Points uniformity White Chromaticity Red Reproduction of color Green Blue ԭ3 ԭ9 ԭ12 Vertical Condition ԭ6 CR CR > 10 ԭ = 0° Yw Y5 ԭ = 0° Y13 Wx Wy Rx Ry Gx Gy Bx By ԭ = 0° ԭ = 0° Min. Typ. Max. Unit Remarks - 89 90 Deg. - 89 90 Deg. - 89 90 Deg. - 89 90 Deg. 400 500 - 250 300 - 80 - - 60 - - 0.260 0.300 0.340 0.280 0.320 0.360 0.523 0.563 0.603 0.314 0.354 0.394 0.291 0.331 0.371 0.502 0.542 0.582 0.106 0.146 0.186 0.077 0.117 0.157 Note 1 Note 2 cd/m2 % Note 4 Note 5 Note 3 Response Time Total (Tr + Td) Ta= 25° C ԭ = 0° - 30 - ms Note 6 Cross Talk CT ԭ = 0° - - 2.0 % Note 7 SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 9 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 Notes : 1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing angles are determined for the horizontal or 3, 9 o’clock direction and the vertical or 6, 12 o’clock direction with respect to the optical axis which is normal to the LCD surface (see Figure1). 2. Contrast measurements shall be made at viewing angle of ഀ= 0 and at the center of the LCD surface. Luminance shall be measured with all pixels in the view field set first to white, then to the dark (black) state (see Figure1). Luminance Contrast Ratio (CR) is defined mathematically as CR = Luminance when displaying a white raster / Luminance when displaying a black raster. 3. Reference only / Standard Front Surface Treatment Measured with green cover glass. The color chromaticity coordinates specified in Table 4 shall be calculated from the spectral data measured with all pixels first in red, green, blue and white. Measurements shall be made at the center of the panel. SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 10 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 4.3 Optical Measurements Figure 1. Measurement Set Up Photo detector ( TOPCON BM-5A) Field = 1 o 50 cm TFT-LCD module LCD panel Center of the screen Optical characteristics measurement setup Figure 2. Uniformity Measurement Locations (5 points) Column 320 640 960 Row 200 Y 400 Z X 600 [ \ uG[U Luminance of white is defined as luminance value of the center across the LCD surface. Luminance shall be measured with all pixels in the view field set first to white. This measurement shall be taken at the locations shown in Figure 2 for a total of the measurements per display. * dGLuminance of the panel center SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 11 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 Figure 3. Uniformity Measurement Locations (13 points) XW ZYW XW `]W ]WW XW [WW YWW XW ][W XW uG\U The White luminance uniformity on LCD surface is then expressed as : ȟY5 = (Minimum Luminance of five points / Maximum Luminance of five points) X 100% (see Figure 2) , ȟY13 = (Minimum Luminance of 13 points /Maximum Luminance of 13 points) X 100% (see Figure 3). Figure 4. Response Time Testing TFT Off(Black) TFT On(White) Tr TFT Off(Black) Td 100% 90% 10% 0% SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 12 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 Figure 5. Cross Modulation Test Description VIEW AREA VIEW AREA 320,200 960,200 L31 YB(1120, 400) 320,600 L0 YA (1120, 400) Cross-Talk (%) = 960,600 YB - YA ശ 100 YB Where: YA = Initial luminance of measured area (cd/m2) YB = Subsequent luminance of measured area (cd/m2) The location measured will be exactly the same in both patterns uG]U The electro-optical response time measurements shall be made as Figure 4 by switching the “data” input signal ON and OFF. The times needed for the luminance to change from 10% to 90% is Tr, and 90% to 10% is Td. uG^U Cross-Talk of one area of the LCD surface by another shall be measured by comparing the luminance (YA) of a 25mm diameter area, with all display pixels set to a gray level, to the luminance (YB) of that same area when any adjacent area is driven dark (Refer to Figure 5). SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 13 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 5.0 INTERFACE CONNECTIONS 5.1 Electrical Interface Connection CN1 Interface Connector (20347-040E-02 or Equivalent , Manufactured by I-PEX) User Side Connector (20345-040T-02 or Equivalent , Manufactured by I-PEX) Pin No. Symbol 1 GND1 2 NC 3 Function Pin No. Symbol Function GROUND 21 GND6 NON-CONNECTION 22 RCLKIN- LVDS Negative clock signal (-) VDD1 Logic Power Supply : +3.3V 23 RCLKIN+ LVDS Positive clock signal (+) 4 VDD2 Logic Power Supply : +3.3V 24 GND7 GROUND 5 VDD3 Logic Power Supply : +3.3V 25 VDIM PWM Brightness Control 6 VDD_DEID EDID Power Supply : +3.3V 26 VSW LED On/Off Control 7 NC NON-CONNECTION 27 NC NON-CONNECTION 8 CLK_EDID EDID Clock 28 HVGND1 GROUND 9 DATA_EDID EDID Data 29 HVGND2 GROUND 10 GND2 GROUND 30 HVGND3 GROUND 11 GND3 GROUND 31 HVGND4 GROUND 12 NC NON-CONNECTION 32 HVGND5 GROUND 13 RIN0- LVDS Negative data signal (-) 33 NC 14 RIN0+ LVDS Positive data signal (+) 34 HVDD1 Back-light Power Supply: +12V 15 GND4 GROUND 35 HVDD2 Back-light Power Supply: +12V 16 RIN1- LVDS Negative data signal (-) 36 HVDD3 Back-light Power Supply: +12V 17 RIN1+ LVDS Positive data signal (+) 37 HVDD4 Back-light Power Supply: +12V 18 GND5 GROUND 38 HVDD5 Back-light Power Supply: +12V 19 RIN2- LVDS Negative data signal (-) 39 NC NON-CONNECTION 20 RIN2+ LVDS Positive data signal (+) 40 NC NON-CONNECTION GROUND NON-CONNECTION Note 1. Start from left side Note 2. Pin No. 26 (VSW) : Tie to OPEN (or VDD/+5V) for backlight ON or to GND for backlight OFF #1 PCB #40 CN1 (20347-040E-02) User Side Connector (20345-040T-02) SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 14 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 5.2 LVDS Interface LVDS Transmitter : THC63LVDM83A Transmitter Input signal Pin No R0 51 R1 52 R2 54 R3 55 R4 56 R5 3 G0 4 G1 6 G2 7 G3 11 G4 12 G5 14 B0 15 B1 19 B2 20 B3 22 B4 23 B5 24 HSYNC 27 VSYNC 28 DE 30 MCLK 31 SPEC. NUMBER S864-1360 B2005-C001-A (3/3) Pin No Interface 20347-040E-02 System (Tx) TFT-LCD (Rx) 48 47 OUT0OUT0+ IN0IN0+ 13 14 46 45 OUT1OUT1+ IN1IN1+ 16 17 42 41 OUT2OUT2+ IN2IN2+ 19 20 40 CLKOUT- CLKIN- 22 39 CLKOUT+ CLKIN+ 23 SPEC TITLE HV133WX1-100 Product Specification Remark Pin No. PAGE 15 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 5.3 Back-light Interface CN2 LED FPC Connector (20397-008E, Manufactured by I-PEX) Pin No. Symbol Function 1 Anode 2 NC 3 Cathode1 LED Cathode Power Supply 4 Cathode2 LED Cathode Power Supply 5 Cathode3 LED Cathode Power Supply 6 Cathode4 LED Cathode Power Supply 7 Cathode5 LED Cathode Power Supply 8 Cathode6 LED Cathode Power Supply LED Anode Power Supply Remark LED Anode Power Supply (3.2V X 9EA = 28.8V) Non-Connection LED Cathode Power Supply 5.4 Data Input Format OXSXP OYSXP OXY^`SXPOXY_WSXP R G B R G B R G B R G B 1 Pixel = 3 Dots R G B R G B R G B OXS_WWP OYS_WWP SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification R G B R G B OXY^`S_WWPOXY_WS_WWP PAGE 16 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 6.0. SIGNAL TIMING SPECIFICATIONS 6.1 The 13.3” WXGA LCM is operated by the only DE (Data enable) mode (LVDS Transmitter Input) Item Symbol Min. Typ. Max. Unit Frame Period T1 810 823 840 Lines Vertical Display Period T2 - 800 - Lines One line Scanning Period T3 1430 1440 1470 Clocks Horizontal Display Period T4 - 1280 - Clocks 1/T5 50 71.11 80 MHz Clock Frequency 7.0 SIGNAL TIMING WAVEFORMS 7.1 Timing Waveforms of Interface Signal T1 T2 DE T3 DCLK T5 T4 DE DATA SIGNALS SPEC. NUMBER S864-1360 B2005-C001-A (3/3) Valid display data (1280 Clocks) SPEC TITLE HV133WX1-100 Product Specification PAGE 17 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 7.2 LVDS Rx Interface Timing Parameter The specification of the LVDS Rx interface timing parameter < LVDS Rx Interface Timing Specification> Item Symbol Min. Typ. Max. Unit Remarks CLKIN Period tRCIP 12.50 14.06 20.00 nsec Input Data 0 tRIP0 -0.4 0.0 +0.4 nsec Input Data 1 tRIP1 tRICP/7-0.4 tRICP/7 tRICP/7+0.4 nsec Input Data 2 tRIP2 2 ശtRICP/7-0.4 2 ശtRICP/7 2 ശtRICP/7+0.4 nsec Input Data 3 tRIP3 3 ശtRICP/7-0.4 3 ശtRICP/7 3 ശtRICP/7+0.4 nsec Input Data 4 tRIP4 4 ശtRICP/7-0.4 4 ശtRICP/7 4 ശtRICP/7+0.4 nsec Input Data 5 tRIP5 5 ശtRICP/7-0.4 5 ശtRICP/7 5 ശtRICP/7+0.4 nsec Input Data 6 tRIP6 6 ശtRICP/7-0.4 6 ശtRICP/7 6 ശtRICP/7+0.4 nsec tRIP6 tRIP5 tRIP4 tRIP3 tRIP2 tRIP1 tRIP0 RxINz +/* Z = 0, 1, 2 Rx RxCLKIN+/- Rx Rx Rx Rx Rx Rx Vdiff=0[v] Rx Rx Rx Rx Vdiff=0[v] tRCIP SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 18 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 8.0 INPUT SIGNALS, BASIC DISPLAY COLORS & GRAY SCALE OF COLORS Each color is displayed in sixty-four gray scales from a 6 bit data signal input. A total of 262,144 colors are derived from the resultant 18 bit data. Colors & Gray Scale Black Blue Green Basic Cyan Colors Red Magenta Yellow White Black చ Darker Gray చ Scale Of జ Red Brighter జ Red Black చ Darker Gray చ Scale Of జ Green Brighter జ Green Black చ Darker Gray చ Scale Of జ Blue Brighter జ Blue Black చ Gray Darker Scale చ Of White జ & Brighter Black జ White SPEC. NUMBER S864-1360 B2005-C001-A (3/3) Red Data Green Data R5 R4 R3 R2 R1 R0 G5 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 1 0 0 0 0 1 1 1 1 0 1 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 ײ ײ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 1 1 1 0 0 1 1 0 0 1 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 1 1 1 1 1 1 1 1 1 1 0 1 0 1 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 1 1 1 0 0 0 0 1 1 0 0 1 1 0 1 0 1 0 1 1 1 0 1 1 1 0 1 ײ ײ 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 ײ ײ 1 1 1 0 1 0 1 0 1 0 1 0 0 0 ײ ײ ײ ײ 0 0 0 0 0 0 0 1 0 1 0 1 0 1 0 0 0 ײ ײ 0 0 0 0 0 0 1 1 1 0 0 0 ײ ײ 1 1 1 0 0 1 1 0 0 1 1 0 0 0 ײ ײ ײ ײ 0 0 0 0 0 0 0 0 1 1 0 0 1 1 0 0 0 ײ ײ ײ ײ 0 0 0 0 0 0 Blue Data G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 ײ ײ 1 1 1 SPEC TITLE HV133WX1-100 Product Specification 0 1 1 1 0 1 1 1 1 1 1 1 1 1 1 PAGE 19 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 9.0 POWER SEQUENCE To prevent a latch-up or DC operation of the LCD module, the power on/off sequence shall be as shown in below 0.9VDD Power Supply 0V 0.9VDD 0.1VDD 0.1VDD T1 T5 T7 T2 T6 Interface Signal Valid 0V T3 Back- light T4 0V ̻ T1 ≤ 10 ms ̻ 0 ≤ T2 ≤ 50 ms ̻ 200 ms ≤ T3 ̻ 200 ms ≤ T4 ̻ 0 ≤ T5 ˺ 50 ms ̻ 0 ≤ T6 ≤ 10ms ̻ 200ms ≤ T7 Notes : 1. When the power supply VDD is 0V, Keep the level of input signals on the low or keep high impedance. 2. Do not keep the interface signal high impedance when power is on. 3. Back Light must be turn on after power for logic and interface signal are valid. SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 20 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 10.0 MECHANICAL CHARACTERISTICS 10.1 Dimensional Requirements Figure 6 & 7 (located in 11.0) shows mechanical outlines for the model Parameter Specification Active Area 286.08(H) ശ178.80(V) Number of pixels 1280(H) X 800(V) (1 pixel = R + G + B dots) Pixel pitch 0.2235(H) X 0.2235(V) Pixel arrangement RGB Vertical stripe Display colors 262,144 Display mode Normally Black Outline dimension 301.4±0.3(H) ശ196.5±0.3(V) ശ6.5(D:Max.) Weight 275(Typ.) ധ 10 Back-light SMD LED (54EA) Array Unit mm mm g 10.2 Mounting See Figure 6 & 7 & 8. (shown in 11.0) Parameter Specification Torque of side mounting screw Unit 2.5(Max.) kgf 10.3 Glare and Polarizer Hardness. The surface of the LCD has an glare coating to minimize reflection and a coating to reduce scratching. 10.4 Light Leakage There shall not be visible light from the back-lighting system around the edges of the screen as seen from a distance 50cm from the screen with an overhead light level of 150lux. The manufacture shall furnish limit samples of the panel showing the light leakage acceptable. SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 21 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 11.0 Mechanical Drawing Figure 6. TFT-LCD Module Outline Dimension (Front View) SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 22 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 Figure 7. TFT-LCD Module Outline Dimensions (Rear view) 3 4 SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 23 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 Figure 8. TFT-LCD Module Section for Mounting SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 24 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 12.0 RELIABLITY TEST The Reliability test items and its conditions are shown in below. <Table 12. Reliability Test> No Test Item Conditions 1 High temperature storage test Ta = 60 °C, 240 hrs 2 Low temperature storage test Ta = -20 °C, 240 hrs 3 High temperature & high humidity operation test Ta = 50 ଇ, 80%RH, 240hrs 4 High temperature operation test Ta = 50 °C, 240 hrs 5 Low temperature operation test Ta = 0 °C, 240 hrs 6 Thermal shock Ta = -20 °C ↔ 60 °C (30 min), 100 cycle 7 Vibration test (non-operating) Frequency : 10~500Hz Gravity/AMP : 1.5G Period : X,Y,Z 30min 8 Shock test (non-operating) Gravity : 220G Pulse width : 2ms, half sine wave ρX, ρY, ρZ Once for each direction 9 Electro-static discharge test (non-operating) Air : 150pF, 330ohm, 15KV Contact : 150pF, 330ohm, 8KV 13.0 HANDLING & CAUTIONS 13.1 Cautions when taking out the module Pick the pouch only, when taking out module from a shipping package. 13.2 Cautions for handling the module As the electrostatic discharges may break the LCD module, handle the LCD module with care. Peel a protection sheet off from the LCD panel surface as slowly as possible. As the LCD panel and back - light element are made from fragile glass (epoxy) material, impulse and pressure to the LCD module should be avoided. As the surface of the polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for cleaning. Do not pull the interface connector in or out while the LCD module is operating. Put the module display side down on a flat horizontal plane. Handle connectors and cables with care. SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 25 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 13.3 Cautions for the operation When the module is operating, do not lose MCLK, DE signals. If any one of these signals were lost, the LCD panel would be damaged. Obey the supply voltage sequence. If wrong sequence is applied, the module would be damaged. 13.4 Cautions for the atmosphere Dew drop atmosphere should be avoided. Do not store and/or operate the LCD module in a high temperature and/or humidity atmosphere. Storage in an electro-conductive polymer packing pouch and under relatively low temperature atmosphere is recommended. 13.5 Cautions for the module characteristics Do not apply fixed pattern data signal to the LCD module at product aging. Applying fixed pattern for a long time may cause image sticking. 13.6 Cautions for the digitizer assembly When assembling FPC connector, do not flip connector past 90¶ due to possible damage to connector. When positioning digitizer underneath driver IC, do not lift driver IC past 90¶ due to possible damage to drive IC pattern. Please be warned that during assembly of digitizer, the opening or closing of FPC will result in possible electrostatic discharge damage to the LED 13.7 Other cautions Do not re-adjust variable resistor or switch etc. When returning the module for repair or etc., Please pack the module not to be broken. We recommend to use the original shipping packages. SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 26 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 14.0 LABELS 14.1 Product Label 3 4 BOE HYDIS Barcode 1 2 3 4 5 X X X X X X X 6 X X X 7 X X X X X X X No 1. Control Number No 5. Month (1, 2, 3,…, 9, X, Y, Z) No 2. Rank / Grade No 6. FG Code No 3. Line Classification (BOE HYDIS : H, LCM : L, BOE OT : A/B/C) No 7. Serial Number No 4. Year (7 : 2007, 8 : 2008, …) SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 27 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 14.2 Packing Label Label Size: 108 mm (L) × 56 mm (W) Contents Model: HV133WX1-100 Q`ty: Module Q`ty in one box Serial No.: Box Serial No. See next figure for detail description. Date: Packing Date FG Code: FG Code of Product MODEL : HV133WX1-100 Q’TY : XX SERIAL NO. : 0000000000000 DATE : XXXX. XX. XX 00 0 00 0 0 000000 Type Grade Year Month ITEM-CODE Serial no. SPEC. NUMBER S864-1360 B2005-C001-A (3/3) FG CODE SPEC TITLE HV133WX1-100 Product Specification RoHS Mark PAGE 28 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 15.0 PACKING INFORMATION 15.1 Packing order Put Pad into the box. Put silica gels in the box. After sealing the box, attach Packing Label on the attach position sign area of the box. Place a cover on the top of the box. As shown in the figure, place the Modules bundled by shielding bag in the box. 15.2 Notes Box Dimension : 333.0mm(W) X 333.0mm(D) X 435.0mm(H) Package Quantity in one Box : 10pcs SPEC. NUMBER S864-1360 B2005-C001-A (3/3) SPEC TITLE HV133WX1-100 Product Specification PAGE 29 OF 34 A4(210 X 297) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 16.0 EDID Table EDID chip is 24LC024 (Microchip) or equivalent . Address Hex Dec W eek of manufacture Year of Manufacture EDID Structure Ver. EDID revision # Video input definition Max H image size Max V image size Display Gamma 00 FF FF FF FF FF FF 00 09 E5 28 0A 00 00 00 00 0 11 01 03 80 1D 12 78 0 255 255 255 255 255 255 0 9 229 40 10 0 0 0 0 0 17 1 3 128 29 18 120 18 Feature support 0A 10 19 1A 1B 1C 1D 1E 1F 20 21 22 Red/Green low bits Blue/W hite low bits Red x high bits Red y high bits Green x high bits Green y high bits Blue x high bits BLue y high bits W hite x high bits W hite y high bits 6F 8C 90 5A 54 8A 25 1E 4C 52 111 140 144 90 84 138 37 30 76 82 (HEX) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 Function Header ID Manufacturer Name ID Product Code 32-bit serial No. SPEC. NUMBER S864-1360 B2005-C001-A (3/3) values. Notes EDID Header BOE ID = BOE 2600 CODE = 2600 2007 1 3 Manufactured in 2007 EDID Ver 1.0 EDID Rev. 0.3 29 18 2.2 29 cm (Approx) 18 cm (Approx) Gamma curve = 2.2 RGB display, Preferred Timming mode Red / Green Low Bits Blue / W hite Low Bits Rx = 0.563 Ry = 0.354 Gx = 0.331 Gy = 0.542 Bx = 0.146 By = 0.117 W x = 0.300 W y = 0.320 0.563 0.354 0.331 0.542 0.146 0.117 0.300 0.320 SPEC TITLE HV133WX1-100 Product Specification PAGE 30 OF 34 A4(210 X 297) Address PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 Function Hex Dec Established timing 1 Established timing 2 Established timing 3 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 C7 1B 00 A0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 199 27 0 160 3A 50 80 3B 3C 20 17 32 23 3D 30 48 30 20 36 00 48 32 54 0 48 32 3 6 42 1E 5 286 43 B3 163 179 44 10 16 45 46 47 00 00 19 0 0 25 (HEX) 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 30 31 32 33 34 35 36 37 38 39 3E 3F 40 41 Standard timing #1 Standard timing #2 Standard timing #3 Standard timing #4 Standard timing #5 Standard timing #6 Standard timing #7 Standard timing #8 Detailed timing/monitor descriptor #1 (60Hz) SPEC. NUMBER S864-1360 B2005-C001-A (3/3) values. Notes Not Used Not Used Not Used Not Used Not Used Not Used Not Used Not Used 71.11 71.11MHz Main clock 1280 160 Hor Active = 1280 Hor Blanking = 160 4 bits of Hor. Active + 4 bits of Hor. Blanking Ver Active = 800 Ver Blanking = 23 4 bits of Ver. Active + 4 bits of Ver. Blanking Hor Sync Offset = 48 H Sync Pulse W idth = 32 V sync Offset = 3 line V Sync Pulse width : 6 line Horizontal Image Size = 286 mm (Low 8 bits) Vertical Image Size = 179 mm (Low 8 bits) 4 bits of Hor Image Size + 4 bits of Ver Image Size Hor Border (pixels) Vertical Border (Lines) 800 23 SPEC TITLE HV133WX1-100 Product Specification PAGE 31 OF 34 A4(210 X 297) Address (HEX) 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5D 5E 5F 60 61 62 63 64 65 66 67 68 69 6A 6B Function Detailed timing/monitor descriptor #2 Detailed timing/monitor descriptor #3 SPEC. NUMBER S864-1360 B2005-C001-A (3/3) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 Hex Dec 00 00 00 FE 00 0A 20 20 20 20 20 20 20 20 20 20 20 20 00 00 00 FE 00 42 4F 45 20 48 59 44 49 53 0A 20 20 20 0 0 0 254 0 10 32 32 32 32 32 32 32 32 32 32 32 32 0 0 0 254 0 66 79 69 32 72 89 68 73 83 10 32 32 32 values. SPEC TITLE HV133WX1-100 Product Specification Notes B O E H Y D I S PAGE 32 OF 34 A4(210 X 297) Address (HEX) 6C 6D 6E 6F 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7D 7E 7F Function Detailed timing/monitor descriptor #4 Extension flag Checksum SPEC. NUMBER S864-1360 B2005-C001-A (3/3) PRODUCT GROUP REV ISSUE DATE TFT LCD PRODUCT 0 2008.05.28 Hex Dec 00 00 00 FE 00 48 56 31 33 33 57 58 31 20 20 20 20 0A 00 2F 0 0 0 254 0 72 86 49 51 51 87 88 49 32 32 32 32 10 0 09 values. Notes Product Name Tag (ASCII) H V 1 3 3 W X 1 SPEC TITLE HV133WX1-100 Product Specification Model name : HV133W X1 PAGE 33 OF 34 A4(210 X 297)