RGB Color Light Sensor Surface - Mount CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Features ‧Surface-mount plastic package ‧High sensitivity for Red, Green, and Blue light source CLS15-22C/L213R/TR8 (λp= 620nm, Red) CLS15-22C/L213G/TR8 (λp= 550nm, Green) CLS15-22C/L213B/TR8 (λp= 470nm, Blue) ‧Good stable analog output with temperature shift ‧Size: 3.2mm (L)*2.7mm (W)*1.1mm (H) ‧Operating temperature performance, -40oC to 85oC ‧Active area: 1.8 mm2 ‧RoHS compliant and Pb free package Description CLS15-22C/L213/TR8 series color sensor device is one channel Si photodiode sensitivity to Red, Green and Blue region spectrum in miniature SMD package. Everlight color sensor series product is the good effective and low cost solution to white color balance, color detection and color management applications. Applications ‧Color adjustment for LED back light system ‧Color adjustment for LED projector ‧Color detection ‧White balance adjustment ‧Consumer and mobile appliances 1 Copyright © 2012, Everlight All Rights Reserved. Release Date : 6.4.2013. Issue No: DLS-0000056 Rev.1 www.everlight.com DATASHEET Ambient Light Sensor Surface – Mount CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Package Dimensions Anode Cathode Unit : mm Tolerances : ±0.1mm 2 Copyright © 2012, Everlight All Rights Reserved. Release Date : 6.4.2013. Issue No: DLS-0000056 Rev.1 www.everlight.com DATASHEET Ambient Light Sensor Surface – Mount CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Absolute Maximum Ratings Parameter Symbol Condition Rating Units Reverse Breakdown Voltage VBR IR = 100µA 35 V Forward Voltage Operating Temperature VF IF = 10mA 0.5~1.3 V Topr -- -40 ~ +85 °C Storage Temperature Tstg -- -40 ~ +85 °C Tsol -- 260 °C Soldering Temperature [Note] ≦ Note: Soldering time 5 seconds Electrical and Optical Characteristics (Ta=25℃ ℃) Red Color Sensor : CLS15-22C/L213R/TR8 Parameter Symbol Condition Peak Sensitivity -λP Wavelength Short-Circuit Current ISC IL1 Light Current IL2 Reverse Dark Current Total Capacitance Ev=100Lux VR=0V [Note] Ev=100Lux VR=5V [Note] Ev=1000Lux VR=5V [Note] MIN. TYP. MAX. Unit -- 620 -- nm -- 0.086 -- µA -- 0.091 -- µA -- 0.83 -- µA ID Ev=0 VR = 10 V -- 2 10 nA Ct Ee=0mW /cm2 f=1MHz VR=5V -- 12 -- pF Note: White Fluorescent light (Color Temperature = 6500K) is used as light source. 3 Copyright © 2012, Everlight All Rights Reserved. Release Date : 6.4.2013. Issue No: DLS-0000056 Rev.1 www.everlight.com DATASHEET Ambient Light Sensor Surface – Mount CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Green Color Sensor: CLS15-22C/L213G/TR8 Parameter Symbol Condition Peak Sensitivity λP -Wavelength Ev=100Lux Short-Circuit Current ISC VR=0V [Note] MIN. TYP. MAX. Unit -- 550 -- nm -- 0.075 -- µA IL1 Ev=100Lux VR=5V [Note] -- 0.082 -- µA IL2 Ev=1000Lux VR=5V [Note] -- 0.72 -- µA -- 2 10 nA -- 12 -- pF Light Current Reverse Dark Current ID Total Capacitance Ct Ev=0 Lux VR = 10 V Ee=0mW /cm2 f=1MHz VR=5V Note: White Fluorescent light (Color Temperature = 6500K) is used as light source. Blue Color Sensor: CLS15-22C/L213B/TR8 Parameter Symbol Condition Peak Sensitivity λP -Wavelength Ev=100Lux Short-Circuit Current ISC VR=0V [Note] Ev=100Lux IL1 VR=5V [Note] Light Current Ev=1000Lux IL2 VR=5V [Note] Ev=0 Lux ID Reverse Dark Current VR = 10 V Ee=0mW /cm2 Ct f=1MHz Total Capacitance VR=5V MIN. TYP. MAX. Unit -- 470 -- nm -- 0.042 -- µA -- 0.046 -- µA -- 0.39 -- µA -- 2 10 nA --- 12 --- pF Note: White Fluorescent light (Color Temperature = 6500K) is used as light source. 4 Copyright © 2012, Everlight All Rights Reserved. Release Date : 6.4.2013. Issue No: DLS-0000056 Rev.1 www.everlight.com DATASHEET Ambient Light Sensor Surface – Mount CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Typical Electro-Optical Characteristics Curves Fig.1 Dark Current vs. Temperature Fig.2 Light current vs. Illuminance (typ.) (typ.) 1000 10 CLS15-22C/L123B/T R8 CLS15-22C/L123G/T R8 CLS15-22C/L123R/T R8 o Average dark current (nA) 100 V R =5V ; Ta=25 C C LS 15-22C /L213R C LS 15-22C /L213G C LS 15-22C /L213B 1 Ouput Current (mA) VR = 10 V EV = 0 LUX 10 1 0.1 0.01 -60 0.1 0.01 1E -3 -40 -20 0 20 Temperature ( Fig.3 40 ℃) 60 80 100 1E -4 1 10 100 1000 10000 Illum inance (Lux) Light current vs. Voltage Fig.4 Light current vs. Temperature (typ.) (typ.) 10 CLS 15-22C/L213R/TR8 CLS 15-22C/L213G/TR8 CLS 15-22C/L213B/TR8 C LS 15-22C /L213R /TR 8 White Fluorescent light C LS 15-22C /L213G/T R 8 Ev = 100Lux C LS 15-22C /L213B/TR 8 Average light current (uA) Average light current (uA) 0.20 0.15 0.10 0.05 0.00 Ev = 100Lux 1 0.1 0.01 1 2 3 4 5 6 7 -60 Fig.5 Spectral Response (Blue region) -40 -20 0 20 Temperature ( Voltage (V) Fig.6 40 ℃) 60 80 100 Spectral Response (Green region) (typ.) (typ.) 5 Copyright © 2012, Everlight All Rights Reserved. Release Date : 6.4.2013. Issue No: DLS-0000056 Rev.1 www.everlight.com DATASHEET Ambient Light Sensor Surface – Mount CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Fig.7 Spectral Response (Red region) (typ.) 6 Copyright © 2012, Everlight All Rights Reserved. Release Date : 6.4.2013. Issue No: DLS-0000056 Rev.1 www.everlight.com DATASHEET Ambient Light Sensor Surface – Mount CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Recommended method of storage Reflow Terms: JEDEC Level 4 Specification Dry box storage is recommended as soon as the aluminum bag has been opened prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: Storage temperature 10 Storage humidity ℃ to 30℃ ≦60%RH max After more than 72 hours under these conditions moisture content will be too high for Reflow soldering. In case of moisture absorption, the devices will recover to former condition by drying under the following condition: ℃ ℃/-0℃ and 5%RH (dry air / nitrogen), or 96 hours at 60℃+5℃ and < 5%RH for all device containers, or 24 hours at 125℃+5℃ not suitable for reel or tubes 192 hours at 40 +5 ESD Precaution: Proper storage and handing procedures should be followed to prevent ESD damage to the devices especially when they are removed from the Anti-static bag. Electro-Static Sensitive Devices warning labels are on the packing. Recommended Solder Profile Notice: (1) Reflow soldering should not be done more than two times. (2) When soldering, do not put stress on the devices during heating. (3) After soldering, do not warp the circuit board. 7 Copyright © 2012, Everlight All Rights Reserved. Release Date : 6.4.2013. Issue No: DLS-0000056 Rev.1 www.everlight.com DATASHEET Ambient Light Sensor Surface – Mount CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Soldering Iron ℃ for 3 seconds within once in less than Each terminal is to go to the tip of soldering iron temperature less than 350 the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Repairing Repair should not be done after the device have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the device will or will not be damaged by repairing. 8 Copyright © 2012, Everlight All Rights Reserved. Release Date : 6.4.2013. Issue No: DLS-0000056 Rev.1 www.everlight.com DATASHEET Ambient Light Sensor Surface – Mount CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Packing Quantity Specification 3000 PCS/ 1 Reel Label Format CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place 9 Copyright © 2012, Everlight All Rights Reserved. Release Date : 6.4.2013. Issue No: DLS-0000056 Rev.1 www.everlight.com DATASHEET Ambient Light Sensor Surface – Mount CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Reel Dimensions Unit: mm Tolerance: ±0.1mm Tape Dimensions Unit: mm Tolerance: ±0.1mm 10 Copyright © 2012, Everlight All Rights Reserved. Release Date : 6.4.2013. Issue No: DLS-0000056 Rev.1 www.everlight.com DATASHEET Ambient Light Sensor Surface – Mount CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Moisture Resistant Packaging Label Aluminum moistue-proof bag Desiccant Label Note: 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 11 Copyright © 2012, Everlight All Rights Reserved. Release Date : 6.4.2013. Issue No: DLS-0000056 Rev.1 www.everlight.com