CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Surface - Mount RGB Color Sensor Features ․Surface-mount plastic package ․High sensitivity for Red, Green, and Blue light source CLS15-22C/L213R/TR8 (λp= 620nm, Red) CLS15-22C/L213G/TR8 (λp= 550nm, Green) CLS15-22C/L213B/TR8 (λp= 470nm, Blue) Good stable analog output with temperature shift Size: 3.2mm (L)*2.7mm (W)*1.1mm (H) Operating temperature performance, -40oC to 85oC Active area: 1.8 mm2 RoHS compliant and Pb free package ․ ․ ․ ․ ․ Descriptions CLS15-22C/L213/TR8 series color sensor device is one channel Si photodiode sensitivity to Red, Green and Blue region spectrum in miniature SMD package. Everlight color sensor series product is the good effective and low cost solution to white color balance, color detection and color management applications. Applications ․Color adjustment for LED back light system ․Color adjustment for LED projector ․Color detection ․White balance adjustment ․Consumer and mobile appliances Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 1 http:\\www.everlight.com Nov. 15, 2007 CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Surface - Mount RGB Color Sensor Package Dimensions Anode Cathode Unit: mm Tolerances: ± 0.1mm Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 2 http:\\www.everlight.com Nov. 15, 2007 CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Surface - Mount RGB Color Sensor Absolute Maximum Ratings (Ta=25°C) Parameter Symbol Condition Rating Units Reverse Breakdown Voltage VBR IR = 100µA 35 V Forward Voltage VF 0.5~1.3 V Operating Temperature Topr IF = 10mA － -40 ~ +85 °C Storage Temperature Tstg － -40 ~ +85 °C Tsol － 260 °C Soldering Temperature [Note] ≦5 seconds Note: Soldering time Electro-Optical Characteristics (Ta=25°C) Red Color Sensor: CLS15-22C/L213R/TR8 Parameter Symbol Condition MIN. Peak Sensitivity Wavelength λP － － 620 － nm Short-Circuit Current ISC Ee=100Lux VR=0V [Note] － 0.086 － µA IL1 Ee=100Lux VR=5V [Note] － 0.091 － µA IL2 Ee=1000Lux VR=5V [Note] － 0.83 － µA － 2 10 nA － 0.21 － A/W Reverse Light Current Reverse Dark Current ID Photo sensitivity S Ee=0 VR = 10 V Red (λP=630nm) TYP. MAX. Unit Note: White Fluorescent light (Color Temperature = 6500K) is used as light source Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 3 http:\\www.everlight.com Nov. 15, 2007 CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Surface - Mount RGB Color Sensor Green Color Sensor: CLS15-22C/L213G/TR8 Parameter Symbol Condition MIN. Peak Sensitivity Wavelength λP － － 550 － nm Short-Circuit Current ISC － 0.075 － µA － 0.082 － µA IL1 Reverse Light Current Ee=100Lux VR=0V [Note] Ee=100Lux VR=5V [Note] TYP. MAX. Unit IL2 Ee=1000Lux VR=5V [Note] － 0.72 － µA Reverse Dark Current ID Ee=0 Lux VR = 10 V － 2 10 nA Photo sensitivity S Green (λP=520nm) － 0.18 － A/W Note: White Fluorescent light (Color Temperature = 6500K) is used as light source Blue Color Sensor: CLS15-22C/L213B/TR8 Parameter Symbol Condition MIN. Peak Sensitivity Wavelength λP － － 470 － nm Short-Circuit Current ISC Ee=100Lux VR=0V [Note] － 0.042 － µA IL1 Ee =100Lux VR=5V [Note] － 0.046 － µA IL2 Ee =1000Lux VR=5V [Note] － 0.39 － µA Reverse Dark Current ID VR = 10 V － 2 10 nA Photo sensitivity S Blue (λP=465nm) － 0.09 － A/W Reverse Light Current TYP. MAX. Unit Note: White Fluorescent light (Color Temperature = 6500K) is used as light source Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 4 http:\\www.everlight.com Nov. 15, 2007 CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Surface - Mount RGB Color Sensor Typical Electro-Optical Characteristics Curves Fig.1 Dark Current vs. Temperature Fig.2 Light current vs. Illuminance (typ.) (typ.) 10 1000 o 100 VR = 10 V EV = 0 LUX 10 1 0.1 0.1 0.01 1E -3 0.01 -60 -40 -20 0 20 Temperature ( Fig.3 V R =5V ; Ta=25 C C LS 15-22C /L213R C LS 15-22C /L213G C LS 15-22C /L213B 1 Ouput Current (mA) Average dark current (nA) CLS15-22C/L123B/T R8 CLS15-22C/L123G/T R8 CLS15-22C/L123R/T R8 40 ℃) 60 80 100 1E -4 1 10 100 1000 10000 Illum inance (Lux) Light current vs. Voltage Fig.4 Light current vs. Temperature (typ.) (typ.) 10 CLS 15-22C/L213R/TR8 CLS 15-22C/L213G/TR8 CLS 15-22C/L213B/TR8 C LS 15-22C /L213R /TR 8 White Fluorescent light C LS 15-22C /L213G/T R 8 Ev = 100Lux C LS 15-22C /L213B/TR 8 Average light current (uA) Average light current (uA) 0.20 0.15 0.10 0.05 0.00 Ev = 100Lux 1 0.1 0.01 1 2 3 4 5 6 -60 7 Fig.5 Spectral Response (Blue region) Fig.6 (typ.) Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 -40 -20 0 20 Temperature ( Voltage (V) 40 ℃) 60 80 100 Spectral Response (Green region) (typ.) 5 http:\\www.everlight.com Nov. 15, 2007 CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Surface - Mount RGB Color Sensor Fig.7 Spectral Response (Red region) (typ.) Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 6 http:\\www.everlight.com Nov. 15, 2007 CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Surface - Mount RGB Color Sensor Recommended method of storage Reflow Terms: JEDEC Level 4 Specification Dry box storage is recommended as soon as the aluminum bag has been opened prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: ℃ to 30℃ Storage temperature 10 Storage humidity ≦60%RH max After more than 72 hours under these conditions moisture content will be too high for Reflow soldering. In case of moisture absorption, the devices will recover to former condition by drying under the following condition: ℃ ℃/-0℃ and 5%RH (dry air / nitrogen), or 96 hours at 60℃+5℃ and < 5%RH for all device containers, or 24 hours at 125℃+5℃ not suitable for reel or tubes 192 hours at 40 +5 ESD Precaution: Proper storage and handing procedures should be followed to prevent ESD damage to the devices especially when they are removed from the Anti-static bag. Electro-Static Sensitive Devices warning labels are on the packing. Recommended Solder Profile Notice: (1) Reflow soldering should not be done more than two times. (2) When soldering, do not put stress on the devices during heating. (3) After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 7 http:\\www.everlight.com Nov. 15, 2007 CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Surface - Mount RGB Color Sensor Soldering Iron ℃ for 3 Each terminal is to go to the tip of soldering iron temperature less than 350 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Repairing Repair should not be done after the device have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the device will or will not be damaged by repairing. Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 8 http:\\www.everlight.com Nov. 15, 2007 CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Surface - Mount RGB Color Sensor Packing Quantity Specification 2000 PCS/ 1 Reel Label Format xxxxxx xxxxxx RoHS xxxxxxxxxxxx xxxx xxxxxxxx Reel Dimensions Unit: mm Tolerance: ±0.1mm Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 9 http:\\www.everlight.com Nov. 15, 2007 CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Surface - Mount RGB Color Sensor Tape Dimensions Unit: mm Tolerance: ±0.1mm Moisture Resistant Packaging Label Label Aluminum moistue-proofbag bag Aluminum moisture-proof Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 10 Desiccant Desiccant Label Label http:\\www.everlight.com Nov. 15, 2007 CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Surface - Mount RGB Color Sensor Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority onmaterial change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 11 http:\\www.everlight.com Nov. 15, 2007