Technical Data Sheet Top Phototransistor PT67-21C/L41/TR8 Features ․Fast response time ․High photo sensitivity ․Small junction capacitance ․Compatible with infrared and vapor phase reflow solder process. ․Pb free ․The product itself will remain within RoHS compliant version. Description PT67-21C/L41/TR8 is a high speed silicon NPN epitaxial planar phototransistor in a compact surface-mountable package. It’s compatible with automatic placement equipment and can withstand IR reflow, vapor phase reflow , and wave solder processes. Applications ․Miniature switch ․Counters and sorter ․Position sensor ․Infrared applied system ․Encoder Device Selection Guide Device No. Chip Material Lens Color PT67-21C/L41/TR8 Silicon Water clear 1 Copyright Revision :3 © LifecyclePhase: Date:2013-07-15 09:59:04.0 2010, Everlight All Rights Reserved. Release Date : JULY.10.2013. IssueRelease No: DPT-0000306 www.everlight.com Expired Period: Forever DATASHEET PT67-21C/L41/TR8 Package Dimensions Max0.1 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Collector-Emitter Voltage Emitter-Collector-Voltage Collector Current Operating Temperature Storage Temperature Soldering Temperature Power Dissipation at(or below) 25℃Free Air Temperature Rating Unit VCEO VECO IC Topr Tstg Tsol 30 5 20 -25 ~ +85 -40 ~ +85 260 V V mA ℃ ℃ ℃ Pc 75 mW Notes: *1:Soldering time≦5 seconds. 2 Copyright Revision :3 © LifecyclePhase: Date:2013-07-15 09:59:04.0 2010, Everlight All Rights Reserved. Release Date : JULY.10.2013. IssueRelease No: DPT-0000306 www.everlight.com Expired Period: Forever DATASHEET PT67-21C/L41/TR8 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Unit Condition 1100 nm ----- Rang Of Spectral Bandwidth λ0.5 400 Wavelength Of Peak Sensitivity λP --- 940 --- nm BVCEO 30 --- --- V BVECO 5 --- --- V VCE(sat) --- --- 0.4 V Collector Dark Current ICEO --- --- 100 nA On State Collector Current IC(ON) 0.3 1.0 --- mA tr --- 15 --- Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector-Emitter Saturation Voltage Rise Time --- Max. μS Fall Time 3 Copyright Revision :3 © LifecyclePhase: tf --- 15 --- IC=100μA Ee=0mW/cm2 IE=100μA Ee=0mW/cm2 IC=2mA Ee=1mW/cm2 VCE=20V Ee=0mW/cm2 VCE=5V Ee=1mW /cm2 VCE=5V IC=1mA RL=1000Ω Date:2013-07-15 09:59:04.0 2010, Everlight All Rights Reserved. Release Date : JULY.10.2013. IssueRelease No: DPT-0000306 www.everlight.com Expired Period: Forever DATASHEET PT67-21C/L41/TR8 Typical Electrical/Optical/Characteristics Curves for IR Collector Power Dissipation vs. Ambient Temperature 100 Spectral Sensitivity 1.0 Ta=25 C 80 0.8 60 0.6 40 0.4 20 0.2 0 -25 25 0 50 75 85 100 Collector Current vs. Irradiance 0 100 300 500 700 900 1100 1300 Collector Current vs. Collector-Emitter Voltage 14 100 12 C 10 10 8 1 6 4 0.1 2 0.01 0.01 0.1 10 1 0 0 1 2 3 4 2 4 Copyright Revision :3 © LifecyclePhase: Date:2013-07-15 09:59:04.0 2010, Everlight All Rights Reserved. Release Date : JULY.10.2013. IssueRelease No: DPT-0000306 www.everlight.com Expired Period: Forever DATASHEET PT67-21C/L41/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Shelf life in sealed bag from the bag seal date: 12 months at < 40°C and < 90% RH. 2.3 After opening the package, the LEDs must be kept at 30C and 60%RH, and used within a year. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time. Baking treatment is required, refer to IPC/JEDEC J-STD-033 for bake procedure or recommend the conditions : 60±5C for 48 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 5 Copyright Revision :3 © LifecyclePhase: Date:2013-07-15 09:59:04.0 2010, Everlight All Rights Reserved. Release Date : JULY.10.2013. IssueRelease No: DPT-0000306 www.everlight.com Expired Period: Forever DATASHEET PT67-21C/L41/TR8 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 6 Copyright Revision :3 © LifecyclePhase: Date:2013-07-15 09:59:04.0 2010, Everlight All Rights Reserved. Release Date : JULY.10.2013. IssueRelease No: DPT-0000306 www.everlight.com Expired Period: Forever DATASHEET PT67-21C/L41/TR8 Package Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm 2. Carrier Tape Dimensions:(Quantity: 2000pcs/reel) Emitter Collector Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm 7 Copyright Revision :3 © LifecyclePhase: Date:2013-07-15 09:59:04.0 2010, Everlight All Rights Reserved. Release Date : JULY.10.2013. IssueRelease No: DPT-0000306 www.everlight.com Expired Period: Forever DATASHEET PT67-21C/L41/TR8 Packing Procedure Aluminum moistue-proof bag Label Desiccant Label Label Form Specification Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX QTY : XXX CAT : XXX HUE : XXX REF : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. EVERLIGHT ELECTRONICS CO., LTD. Office: No 6-8, Zhonghua Rd., Shulin Dist., New Taipei City 23860, Taiwan, R.O.C 8 Copyright Revision :3 © LifecyclePhase: Tel: 886-2-2685-6688 Fax: 886-2-2685-6699 http://www.everlight.com Date:2013-07-15 09:59:04.0 2010, Everlight All Rights Reserved. Release Date : JULY.10.2013. IssueRelease No: DPT-0000306 www.everlight.com Expired Period: Forever