4532 SERIES Gas Discharge Tube (GDT) Data Sheet

4532 SERIES
Gas Discharge Tube (GDT) Data Sheet
Features
■
■
■
■
■
■
■
■
■
■
High insulation resistance.
Low capacitance (≤0.5pF).
2000A 8/20μs maximum surge current capacity in accordance with IEC61000-4-5.
4KV 10/700μs maximum surge rating in accordance with ITU-TK.21
Surface mounted gas arrester
Micro-Gap Design
Size 4532(1812)
Storage and operating temperature: -40℃ ~ +85℃
Meets MSL level 1, per J-STD-020
Safety certification: UL: E244458
Applications
■
■
■
■
Repeaters, Modems.
Telephone Interface, Line cards.
Data communication equipment.
Line test equipment
Part Number Code and Marking
090: Device Marking Code
Dimensions
1.5mm
0.5±0.1mm
4.5±0.3mm
2.7±0.3mm
3.0mm
Recommended Pad Size
Revision:15-Aug-14
www.brightking.com
4532 SERIES
Electrical Characteristics
DC
Spark-over
Voltage
Maximum
Impulse
Spark-over
Voltage
Impulse
Life
Test
100V/s
1KV/μs
8/20μs
100A
Test
Voltage
(V)
(V)
(Times)
DC(V)
4532-091-LF
90±30%
700
300
50
4532-121-LF
120±30%
700
300
4532-151-LF
150±30%
700
4532-201-LF
200±30%
4532-231-LF
230±30%
Part
Number
Maximum
Capacitance
Nominal
Impulse
Discharge
Current
(1MHz 1V)
8/20μs
(pF)
(A)
1
0.5
2000
090
50
1
0.5
2000
120
300
50
1
0.5
2000
150
750
300
100
1
0.5
2000
200
750
300
100
1
0.5
2000
Minimum
Insulation
Resistance
(GΩ)
Impulse
Withstanding
Voltage
Capacity
Device
Marking
Code
230
10/700μs
4532-301-LF
300±30%
900
300
100
1
0.5
2000
4532-351-LF
350±30%
900
300
100
1
0.5
2000
4532-401-LF
400±30%
1000
300
100
1
0.5
2000
400
4532-421-LF
420±30%
1000
300
100
1
0.5
2000
420
4532-471-LF
470±30%
1000
300
100
1
0.5
2000
470
4532-501-LF
500±30%
1100
300
100
1
0.5
2000
500
4532-601-LF
600±30%
1200
300
100
1
0.5
2000
600
4kV
±5 Times
300
350
Electrical Ratings
Items
DC Spark-over
Voltage
Maximum Impulse
Spark-over Voltage
Insulation
Resistance
Capacitance
Test Condition/Description
Requirement
The voltage is measured with voltage ramp dv/dt=100V/s.
The maximum impulse spark-over voltage is measured with voltage ramp
dv/dt=1000V/μs.
The resistance of gas tube shall be measured between two electrodes.
The capacitance of gas tube shall be measured between two electrodes.
Test frequency: 1MHz
Impulse
Discharge Current
Maximum 8/20μs surge current that can be applied between two
electrodes, 5 positive and 5 negative surges, with 3 minutes interval time,
without causing the DC spark-over voltage to change more than 25% from
its initial value.
Impulse
Withstanding
Voltage
The maximum 10/700μs surge that can be applied to the Gas Tube, 5
positive and 5 negative surges, with 1 minute interval time, without
causing the DC spark-over voltage to change more than 25% from its
initial value.
Revision:15-Aug-14
To meet
the specified
value
www.brightking.com
4532 SERIES
Recommended Soldering Conditions
Reflow Soldering
Recommended Conditions
Profile Feature
Pb-Free Assembly
Average ramp-up rate (TL to TP)
3℃/second max.
Preheat
-Temperature Min (TS min)
-Temperature Max (TS max)
-Time (min to max) (ts)
150℃
200℃
60-180 seconds
TS max to TL
-Ramp-up Rate
3℃/second max.
Time maintained above:
-Temperature (TL)
-Time (tL)
217℃
60-150 seconds
Peak Temperature (TP)
260℃
Time within 5℃ of actual Peak Temperature (tP)
Ramp-down Rate
Time 25℃ to Peak Temperature
Revision:15-Aug-14
20-40 seconds
6℃/second max.
8 minutes max.
www.brightking.com
4532 SERIES
Packaging
Tape
Items
Reel
Dimension (mm)
Spec.
Tolerance
W
12.00
±0.20
P0
4.00
±0.10
P1
8.00
±0.20
P2
2.00
±0.10
D0
1.45
±0.10
D1
1.00
±0.10
E
1.75
±0.10
F
5.50
±0.10
A0
3.80
±0.10
K0
3.20
±0.10
B0
4.90
±0.10
t0
0.40
±0.10
D
330.00
±1.00
d
13.00
±0.50
L
16.00
±0.50
t
2.00
±0.20
Quantity: 2500pcs
Revision:15-Aug-14
www.brightking.com