WP9 Series

COMPONENTS PRODUCT INFORMATION
NEW
0.4mm Pitch, Stacking Type
Board-to-Board (FPC) Connector
WP9 Series
CONNECTOR
MB-0245-3
March 2014
RoHS Compliant
Plug
Receptacle
The WP9 Series is a low-profile stacking type board-to-board (FPC) connector with
0.4mm pitch spacing that is ideal for high-density mounting in slim information
communication devices like mobile phones, smartphones, and notebook PC.
Features
• 0.4mm pitch, 2 rows, 0.8mm stacking height and 1.95mm depth.
• Contact structure ensures high wear-resistance and high contact reliability.
• Secure hold-downs prevent insulator breakage and peeling from FPC.
• 2-point contact design to resist twisting stress.
• Pb-free. Ni barrier on contact prevents solder wicking.
• Inspection jig connector for both plug and receptacle are available. (Note 1)
General Specifications
Number of Contacts: 10 to 60 positions
(Please refer to Development Status on the last page
for contact number availability)
Pitch: 0.4mm, 2 rows
Operating Temperature:
-40 Deg. C to +85 Deg. C
Contact Resistance: 70m max (initial)
Life Time: 50 mating cycles
Rated Current:
AC, DC 0.3A each per terminal
Rated Voltage: AC, DC 50V
Insulation Resistance: 100M min. (initial)
Dielectric Withstanding Voltage:
AC250Vr.m.s for 1 minute
Total Insertion Force: 1.2N x n max. (n: No. of Positions)
Total Extraction Force: 0.15N x n min. (n: No. of Positions)
Note 1) Please contact us for specifications of inspection jig connector.
.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
1/6
MB-0245-3
Materials and Finishes
Component
Material / Finish
Contact
Contact area: Cu alloy / Au plating (0.1 µm min.)
Mounting area: Cu alloy / Au plating (0.05 µm min.)
Insulator
Heat-resistant plastic
Hold-down
Plug: Cu alloy / Au plating (0.05m min.)
Receptacle: Cu alloy / Sn plating
Ordering Information (Plug)
WP9 - P *** V A * - R****
Series
Contact Shape
P: Plug
No. of Contacts
Connection Type
V: Stacking
Reeled Part Number (Note 1)
R6000: For Standard Product
R300: For Inspection Jig Product
Modification Code
1: Standard Product
E: Inspection Jig Product
Finish
A: Au Plating
Ordering Information (Receptacle)
WP9 - S *** V A * - R****
Series
Contact Shape
S: Receptacle
No. of Contacts
Connection Type
V: Stacking
Reeled Part Number (Note 1)
R6000: For Standard Product
R300: For Inspection Jig Product
Modification Code
1: Standard Product
E: Inspection Jig Product
Finish
A: Au Plating
Note 1) An embossed tape reel contains 6,000 pieces of standard product, or 300 pieces
of inspection jig product. Please contact us for details on embossed tape specifications.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
2/6
MB-0245-3
Part Number
WP9-P***VA1
SJ Drawing
SJ111859
WP9 Plug
Note 1) All four corners are hold-downs. (Not available for electrical connection)
ex. 30 (N) position connector will have 34 (N+4) number of SMT terminals.
Note 2) In some cases there will be no steps in this area on both sides, however
there will be no difference in outer dimensions.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
3/6
MB-0245-3
Part Number
WP9-S***VA1
SJ Drawing
SJ111861
WP9 Receptacle
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
4/6
MB-0245-3
Technical Documents
Series
WP9
Drawing Number
(Plug)
Individual Product: SJ111859
Embossed Reel: SJ111860
Drawing Number
(Receptacle)
Individual Product: SJ111861
Embossed Reel: SJ111862
Specification
JACS-10819
Handling Instruction
JAHL-10819
Summary Report
SR-C-1132
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
5/6
MB-0245-3
Development Status
No. of Contacts
Development Status
10
Now in mass-production
14
Now in mass-production
20
Now in mass-production
24
Now in mass-production
30
Now in mass-production
32
Now in mass-production
34
Samples available
40
Now in mass-production
50
Samples available
60
Now in mass-production
Notice:
1. The values specified in this brochure are only for reference. The products and their specifications are subject to change without notice.
Contact our sales staff for further information before considering or ordering any of our products.
For purchase, a product specification must be agreed upon.
2. Users are requested to provide protection circuits and redundancy circuits to ensure safety of the equipment, and sufficiently review the
suitability of JAE's products to the equipment.
3. The products presented in this brochure are designed for the uses recommended below.
We strongly suggest you contact our sales staff when considering use of any of the products in any other way than the recommended
applications or for a specific use that requires an extremely high reliability.
(1) Applications that require consultation:
(i) Please contact us if you are considering use involving a quality assurance program that you specify or that is peculiar to the industry,
such as:
Automotive electrical components, train control, telecommunications devices (mainline), traffic light control, electric power, combustion
control, fire prevention or security systems, disaster prevention equipment, etc.
(ii) We may separately give you our support with a quality assurance program that
you specify, when you think of a use such as :
Aviation or space equipment, submarine repeaters, nuclear power control systems, medical equipment for life support, etc.
(2) Recommended applications include:
Computers, office appliances, telecommunications devices (terminals, mobile units), measuring equipment, audiovisual equipment, home
electric appliances, factory automation equipment, etc
Product Marketing Division
Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539
Phone: +81-3-3780-2882 FAX: +81-3-3780-2946
* The specifications in this brochure are subject to change without notice. Please contact JAE for information.
JAE PMK Div. Proprietary. Copyright © 2014, Japan Aviation Electronics Industry, Ltd.
6/6