bi441 short form 2007 dev.qxd 6/26/07 8:59 AM Page 16 Fixed Resistors 16 Thin Film Resistor Networks Ultra Precision Thin Film - Ceramic Model Number of Leads NQS 16/20/24 664/667/668 8/14/16 688 16 694/698/699 8/16/14 Available Circuit Type A, B A, B A, B -3, -1 Dimensions, Inches 0.196/0.344/0.344 0.196/0.344/0.393 0.413 0.375/0.760/0.760 Height Off Board, Maximum 0.068 0.068 0.104 0.2 Body Style/Width (QSOP) 0.157 (SOICN) 0.157 (SOICW) 0.300 (PDIP) 0.300 Body Length, Maximum Resistance Range, Ohms 10 to 140K 10 to 275K 10 to 275K 10 to 275K Tolerance (%) ±0.1 ±0.1 ±0.1 ±0.1 Temp. Coefficient, ppm/°C ±25 ±25 ±25 ±25 Temp. Coefficient Tracking, ppm/°C ±5 ±5 ±5 ±5 Per Resistor 0.1 0.1 0.1 0.1 Per Package NQS16 = 0.8 NQS20/24 = 1.0 664 = 0.4 667/668 = 0.8 1 694 = 0.4 698/699 = 0.6 Tubes NQS20/24 = 56 NQS16 = 100 664 = 100 667/668 = 50 50 694 = 50 698/699 = 25 Tape & Reel: 7" 1000 664 = 1000 667/668 = 500 500 Tape & Reel: 13" 2500 2500 1500 Power Rating, Watts at 70˚C Packaging Options Vial Ordering Information NQS 24 A 1001 B SQS/SSN/SSW/SPD/SS1 694/698/699 NQS LF P S 7 Tape & Reel Options: Model Series 7 = 7" Reel Dia. 13 = 13" Reel Dia. Number of leads: 16 =16 leads 20 = 20 leads 24 = 24 leads LF for RoHS TCR Code: Circuit Type: P = ± 50ppm/˚C Q = ± 25ppm/˚C (No code is ± 100ppm/˚C) A = Isolated B = Bussed QS 16 Number of leads: 4 = 8 leads 8 = 16 leads 9 = 14 leads LF for RoHS Accuracy Resistance Tol / Ratio B = ±0.1% / ±0.1% D = ±0.5% / ±0.1% F = ±1.0% / ±0.5% 664/667/668/688 66 4 A 1001 A LF Model Series Number of leads: 4 = 8 leads 7 = 14 leads B = 16 leads Circuit Type: A = Isolated B = Bussed J = Dual Terminator 7 Tape & Reel Options: 7 = 7" Reel Dia. 13 = 13" Reel Dia. LF for RoHS Accuracy (Absolute / Ratio) A = ±0.1% / ±0.05% B = ±0.1% / ±0.1% D = ±0.5% / ±0.1% F = ±1.0% / ±0.5% Resistance Code www.bitechnologies.com 1000 F S LF 13 Accuracy Code Resistance Value Consult Factory Packaging Options: Package Type: QS = QSOP SN = SOIC (Narrow Body) SW = SOIC (Wide Body) PD = P-DIP S1 = SOT-23 S2 = SOT-143 Number of Pins: Resistance Code A Model Series Model Series Circuit Type 1 = Bussed 3 = Isolated 3, 4, 8, 14, 16, 20 and 24 Tape & Reel 7 = 7" Reel Dia. 13 = 13" Reel Dia. LF for RoHS TCR Code: L = ±200ppm/C S = ±100ppm/C P = ±50ppm/C Q = ±25ppm/C Circuit Type: A = Isolated B = Bussed D = Dual Termination D1 = Differential Termination G = GTL Termination H = HSTL Termination L = R / 2R Ladder N = NTL Termination V = V.35 Termination VD = Voltage Divider Absolute / Ratio Tolerance Code: B = ±0.1% / ±0.1% D = ±0.5% / ±0.1% F = ±1.0% / ±0.5% G = ±2.0% / (N/A) J = ±5.0% / (N/A) Resistance Code bi441 short form 2007 dev.qxd 6/26/07 8:59 AM Page 17 Fixed Resistors 17 Precision Thin Film - Silicon SQS SSN SSW SPD SS1 16,20,24 8,14,16 16,18,20 8,14,16 3 A, B, D, D1, G, H, L, N, V A, B, D, D1, L, N, V A, B, D, D1, L, V A, B, L VD 0.196/0.344/0.344 0.196/0.344/0.393 0.406/0.459/0.506 0.375/0.760/0.760 0.119 0.068 0.068 0.104 0.2 0.044 (QSOP) 0.157 (SOICN) 0.157 (SOICW) 0.300 (PDIP) 0.300 (SOT23) 0.096 10 to 250k 10 to 250k 10 to 250k 10 to 250k 1k to 50k ±0.1 ±0.1 ±0.1 ±0.1 ±0.1 ±25 ±25 ±25 ±25 ±25 ±5 ±5 ±5 ±5 ±5 0.1 0.1 0.1 0.1 0.1 SQS16 = 0.8 SQS20/24 = 1.0 SSN8 = 0.4 SSN14/16 = 0.8 1.0 SPD8 = 0.4 SPD14/16 = 0.6 0.2 SQS16 = 100 SQS20/SQS24 = 50 SSN8 = 100 SSN14/SSN16 = 50 50 SPD8 = 50 SPD14/SPD16 = 25 1000 SSN8 = 1000 SSN14/16 = 500 500 2500 2500 1500 500 Schematics 20 N 11 R2 R1 R2 1 N/2 R2 R2 R2 R2 R1 R1 R1 R1 R1 R1 R1 R1 R1 R1 R1 R1 R1 R1 R1 R1 R2 R2 R2 R2 R2 R2 R2 20 (VCC) 11 R1 R2 R1 R1 R1 R1 R1 R1 R1 R1 R1 R2 R2 R2 R2 R2 R2 R2 R2 R2 R1 R1 R1 R1 R1 R1 R1 10 Resistance Code: First 3 digits are significant. Fourth digit denotes number of trailing zeros. HSTL Termination 24 NTL Termination 20 13 Resistance Code (R1/R2/R1W ): 01 = 330/150/330 Resistance Code (R1/R2W ): 01 = 220/330 R/2R Ladder 11 16 V.35 Termination 16 9 9 R1 R1 R2 R2 R R R R R R R R R1 R1 R1 R1 R1 R2 R2 R2 R2 R2 R1 R2 R2 R2 R2 R2 R2 R2 R2 R2 R2 12 Resistance Code (R1/R2W ): 01 = 94/94, 02 = 100/100, 03 = 112/112, 04 = 136/136 1 12 R1 Resistance Code: First 3 digits are significant. Fourth digit denotes number of trailing zeros. Voltage Divider SOT - 23 1 R1 R2 R2 R2 R2 R2 R2 R2 R1 1 1 R1 R R2 13 10 1 (GND) Resistance Code: First 3 digits are significant. Fourth digit denotes number of trailing zeros. 24 R2 R2 R2 1 N/2 1 R2 GTL Termination Differential Ended SCSI Termination Dual Terminator/SCSI Bussed Resistors Isolated Resistors N 10 Resistance Codes W : 01 = 25k/50k, 02 = 10k/20k, 03 = 50k/100k 1 8 Resistance Codes (R1/R2W ): 01 = 22/90 R1 R1 1 Resistance Codes (R1/R2W ): 01 = 50/125 8 2 3 Consult Factory for resistance codes. www.bitechnologies.com