ADAM-4150 ADAM-4168 ADAM-4914V Digital I/O module Relay Output Module 4-channel Voltage Input Surge Protection Module NEW NEW ADAM-4150 ADAM-4168 Specifications Digital Input/Output Channels 7 input channels 8 output channels Digital Input Dry contact: Logic level 0: Close to GND. Logic level 1: Open Wet contact: Logic level 0: +3 V max. Logic level 1: +10 V to +30 V Isolation Voltage 3000 VDC - Support 3 kHz counter Digital Output Open drain to 40 V, 0.8A max. Maximum power dissipation: 1 W load Ron Maximum: 150m ohm Supports 1 kHz pulse output Power Consumption 0.4 W (Typical) 0.7 W (Max) Watchdog Timer System, Communication Specifications Specifications Relay Output Input Output Channels Contact Rating Channels 8 Form A AC: 125 V @ 0.6 A 250 V @ 0.3A DC: 30 V @ 2 A 110 V @ 0.6 A Breakdown Voltage 750 VAC (50/60 Hz) Insulation Resistance 1 G Ω min. @ 500 VDC Power Consumption 0.4 W (typical) 1.8 W (max.) Relay Response Time ON : 3 ms Off: 1 ms (typical) Total Switching Time 10 ms Supports 100 Hz pulse output Watchdog Timer System, Communication 13-22 Dimensions Enclosure Mounting Power Input Watchdog Timer Connector 70 x 122 x 30 mm ABS+PC DIN 35 rail, stack, wall Unregulated 10~48 V DC 1.6 sec. (system) 2 x Plug-in terminal blocks (#14 ~ 22 AWG) 4 differential voltage input and thermocouple Performance Discharge Current Discharge Voltage 5,000 A (8/20 µsec.) BETWEEN LINES: 18 V min LINE TO GND: 350 V max. Internal Series Approx. 20 Ω including Resistance return Max. Surge Voltage BETWEEN LINES: 23 V min LINE TO GND: +4,000 V max. Leakage Current BETWEEN LINES: ≤ 10 µA @ 7.5 VDC LINE TO GND: ≤ 5 µA @ +140 VDC Maximum Line Voltage 10 V Response Time Common Specifications ADAM-4914V ≤ 0.1 µsec. Ordering Information Environment Humidity 5 ~ 95% RH Operating Temperature 4914V: -10~70 °C (14 ~ 158° F) 4150/4168: -40 ~ 85 °C (-40 ~ 185° F) Storage Temperature 4914V: -25 ~ 85°C (-13 ~ 185° F) 4150/4168: -40 ~ 85°C (-40 ~ 185° F) ADAM-4150 ADAM-4168 ADAM-4914V Digital I/O Module Relay Output Module 4-channel Voltage Input Surge Protection Module Remote DA&C Modules All product specifications are subject to change without notice Last updated : 9-Mar-2005 ADAM-4950-ENC IP66 Industrial Enclosure Features 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Software Resists temperatures up to 115° C (239° F) Sidewall knockouts provide factory molded openings that are conveniently positioned for wire, cable or conduit feeders. Groove-and-lip type seal design provides the highest degree of protection Built-in DIN-rail for easy mounting of ADAM modules Cable glands included IPPC TPC FPM ATM & AWS Introduction The ADAM-4950-ENC IP66 Industrial Enclosure is designed for use in harsh environments. It offers space for 1 to 3 ADAM modules. Its rugged protective housing guards modules DA&C from UV radiation, corrosive materials, moisture and extreme temperatures. cPCI ADAM-3000 Motion Control Mounts in any position Several screw options let you fasten the box in almost any position. IP66 protection Dust-tight, and protected against water jets and even temporary flooding. Lip-groove seal Non-aging polyurethane seal. Cannot fall out or loosen. ICOM Industrial Networking Dimensions UNO Unit: mm ADAM-4000 ADAM-5000 DIN-rail installation No screws; just snap the module in place. Offers space for three modules. Enclosure Components Case Glass filled polycarbonate (PC), transparent cover Accessories (included) 1 x DIN-rail (21.5 cm) 2 x Polyamide cable glands (seal from 10 - 14 mm) 4 x Captive lid screws ADAM-6000 ADAM-8000 BAS Ordering Information ADAM-4950-ENC IP66 Industrial Enclosure Online Download www.advantech.com/products All product specifications are subject to change without notice Last updated : January 2005 13-23 ADAM 4000/4100 Series Common Specifications Unit: mm Communication RS-485 (2-wire) to host Speeds: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps (ADAM-4080, ADAM-4080D only support up to 38400 bps) Max. communication distance: 4000 feet (1.2 km) Power and communication LED indicator ASCII command/response protocol Communication error checking with checksum Asynchronous data format: Advantech protocol: 1 start bit, 8 data bits, 1 stop bit, no parity Modbus protocol: 1 start bit, 8 data bits, 1 or 2 stop bit, parity check (none, odd, even) (ADAM-4100 series only) Up to 256 multidrop modules per serial port Online module insertion and removal Transient suppression on RS-485 communication lines 13-24 Dimensions Remote DA&C Modules