MB91610 Series

The following document contains information on Cypress products.
FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-16907-3E
32-bit Microcontrollers
CMOS
FR80 MB91610 Series
MB91F610A/613
■ DESCRIPTION
The MB91610 series is a line of Fujitsu Semiconductor microcontrollers based on a 32-bit RISC CPU core that
feature a variety of peripheral functions for embedded applications that demand high-performance and high-speed
CPU processing.
This series is based on the FR80* family CPU and is implemented as a single chip.
* : FR, the abbreviation of FUJITSU RISC controller, is a line of products of Fujitsu Semiconductor Limited.
■ FEATURES
• FR80 CPU
• 32-bit RISC, load/store architecture, five-stage pipeline
• General-purpose registers : 32-bit × 16
• 16-bit fixed-length instructions (basic instructions) : 1 instruction per cycle
• Instructions suitable for embedded applications
- Memory-to-memory transfer, bit processing, barrel shift instructions, etc.
- Instruction support for high level languages
Function entry and exit instructions, instructions for register multi-load and multi-store
- Bit search instruction
“1” detection, “0” detection, transition point detection
- Branch instructions with delay slots
Reduced overhead when processing branches
- Register interlock functions
Facilitate coding in assembly language
(Continued)
For the information for microcontroller supports, see the following web site.
This web site includes the "Customer Design Review Supplement" which provides the latest cautions on
system development and the minimal requirements to be checked to prevent problems before the system
development.
http://edevice.fujitsu.com/micom/en-support/
Copyright©2008-2012 FUJITSU SEMICONDUCTOR LIMITED All rights reserved
2012.4
MB91610 Series
- Built-in multiplier/instruction-level support
- Signed 32-bit multiplication
: 5 cycles
- Signed 16-bit multiplication
: 3 cycles
- Interrupts (save PC and PS) : 6 cycles, 16 priority levels
- Harvard architecture allowing program access and data access to be executed simultaneously
- Instruction prefetch function has been added with 4 word instruction queue of CPU
• Instruction compatible with FR family CPU
- Additional bit search instructions
- No resource instructions and coprocessor instructions
• Maximum operating frequency
• CPU : 33 MHz
• Resources : 33 MHz
• DMA controller (DMAC)
• 8 channels
• Address space : 32 bits (4 Gbytes)
• Transfer modes : Block transfer/burst transfer/demand transfer
• Address update : Increment/decrement/fixed (increment/decrement step size of 1, 2, or 4)
• Transfer data length : Selectable from 8-bit, 16-bit, 32-bit
• Block size : 1 to 16
• Number of transfers : 1 to 65535
• Transfer requests
- Requests from software
- Interrupt requests from peripheral resources (interrupt requests are shared, including external interrupts)
• Reload functions : Reload can be specified on all channels
• Priority order : Fixed (ch.0 > ch.1 > ch.2 > ch.3 > ...) or round-robin
• Interrupt requests : Interrupts can be generated for transfer complete, transfer error, and transfer interrupted.
• Multifunction serial interface
• 4 channels with 16-byte FIFO, 4 channels without FIFO
• Operation mode is selectable from UART/CSIO/I2C for each channel (For ch.0, I2C is not available.)
• UART
- Full-duplex double buffer
- Selectable parity on/off
- Built-in dedicated baud rate generator
- External clock can be used as a serial clock
- Error detection function for parity, frame and overrun errors
• CSIO
- Full-duplex double buffer
- Built-in dedicated baud rate generator
- Overrun error detection function
• I2C
- Supports both standard mode (Max 100 kbps) and Fast mode (Max 400 kbps)
- Some channels are 5 V tolerant
(Continued)
2
DS07-16907-3E
MB91610 Series
• Interrupts
• Total of 16 external interrupts (some pins are 5 V tolerant)
• Interrupts from peripheral resources
• Programmable interrupt levels (16 levels)
• Can be used to return from stop mode, sleep mode
• A/D converter
• 8 channels, 1 unit
• 10-bit resolution
• Conversion time : approx. 1.2 μs (PCLK = 33 MHz)
• Priority conversion (2 levels)
• Conversion modes : Single-shot conversion mode, scan conversion mode
• Activation sources : Software, external trigger, base timer
• Built-in FIFO for storing conversion data (for scan conversion:16, for priority conversion:4)
• Base timer
• 8 channels
• Operation mode is selectable from the followings for each channel
- 16/32-bit reload timer
- 16-bit PWM timer
- 16/32-bit PWC timer
- 16-bit PPG timer
• Cascading connection between 2 channels allows them to be used as one 32-bit timer
• Multiple channels can be started simultaneously
• Input/output select function
• 16-bit reload timer
• 3 channels (including 1 channel for REALOS)
• Interval timer function
• Count clock select function (peripheral clock (PCLK) divided by 2 to 64)
• Compare timer
• 32-bit input capture : 4 channels
• 32-bit output compare : 4 channels
• 32-bit free-run timer : 1 channel
• Other interval timers
• Watch counter : 1 channel
• Watchdog timer : 2 channels
- Watchdog timer 0
- After resetting this device, the watchdog timer becomes active when an arbitrary value is written to the
WDTCPR0 register.
- The cycle of the watchdog timer 0 can be selected from the peripheral clock (PCLK) × (29 to 224).
- Watchdog timer 1
- After releasing the reset of this device, it counts with the CPU clock (CCLK).
- Disable/ enable of the counter operation can be controlled by HWDE pin.
- The cycle of the watchdog timer 1 is CCLK × 223 cycle fixed.
(Continued)
DS07-16907-3E
3
MB91610 Series
• USB function / HOST
• 1 channel
• Supports Full-Speed only
• The USB function and USB HOST are the switch types (USB I/O multiplexed)
• Support of DMA transfer
• USB Function
- Support of up to six endpoints
- Endpoint 0 is provided for the fixed use of control transfers
- Bulk or interrupt transfer can be selected for endpoint 1 to 5
- Double buffer structure for endpoint 1 to 5
• USB HOST
- Support control transfer, bulk transfer, interrupt transfer, and isochronous transfer
- Automatic detection of connection/disconnection of USB devices
- Automatic processing of a handshake packet for IN/OUT token processing
- Support of a maximum packet length of up to 256 bytes
- Support for a wakeup function
• HDMI-CEC/Remote Control Reception
• 1 channel
• HDMI-CEC reception function (with automatic ACK response function)
• Remote control reception function (built-in 4-byte receive buffer)
• OSDC function
• 16 bits RGB (256 colors available among 65536 colors)
• Analog RGB output : Max 50 MHz
Digital RGB output : Max 75 MHz
• A font in 32 × 32 dots can be displayed up to 60 × 32
• Two-layered display of MAIN/SUB
• 16384 characters at the maximum
• Equipped with one PLL for dot clock generation
• Main timer
• 1 channel
• Counts the oscillation stabilization wait time of the main clock (MCLK)
• Counts the oscillation stabilization wait time of the PLL clock (PLLCLK)
• Can be used as an interval timer while the main clock (MCLK) oscillations is stable
• Sub timer
• 1 channel
• Counts the oscillation stabilization wait time of the sub clock (SBCLK)
• Can be used as an interval timer while the sub clock (SBCLK) oscillations is stable
• Clock generation
• Main clock (MCLK) oscillator
• Sub clock (SBCLK) oscillator
• PLL clock (PLLCLK) oscillator
(Continued)
4
DS07-16907-3E
MB91610 Series
(Continued)
• Low-power dissipation mode
• Stop mode
• Watch mode
• Sleep mode
• Doze mode
• Clock division function
• Other features
• I/O port
• INIT pin is provided as a reset pin
• Watchdog timer reset, software reset
• Delay interrupt
• Power supply
- Single power supply (3.0 V to 3.6 V)
DS07-16907-3E
5
MB91610 Series
■ PRODUCT LINEUP
Product Name
MB91F610A
MB91613
Flash memory product
MASK ROM product
512 Kbytes (Flash)
512 Kbytes (ROM)
Items
Product type
Built-in program memory capacity
Built-in RAM capacity
32 Kbytes
DMA controller (DMAC)
8 channels
Base timer
8 channels
Without FIFO : 4 channels (ch.0 to ch.3)
With FIFO : 4 channels (ch.8 to ch.11)
Multifunction serial interface
External interrupt
16 channels
10-bit A/D converter
8 channels (1 unit)
16-bit reload timer
3 channels
Compare timer
32-bit input capture : 4 channels
32-bit output compare : 4 channels
32-bit free-run timer : 1 channel
Watch counter
1 channel
I/O port
50 (Max)
USB function / HOST
1 channel
HDMI-CEC/Remote control reception
1 channel
OSDC
Font FLASH : 16384 characters
Font ROM : 7168 characters
Main timer
1 channel
Sub timer
1 channel
Wild register
16 channels
Debug function
⎯
DSU4
■ PACKAGES
Product name
MB91F610A
MB91613
Package
FPT-120P-M21
: Supported
Note: Refer to “■ PACKAGE DIMENSIONS” for detailed information on each package.
6
DS07-16907-3E
MB91610 Series
■ PIN ASSIGNMENT
VSS
P27/OUT3
P26/SCK9/OUT2
P25/SIN9/OUT1
P24/SOUT9/OUT0
P23/RCIN_1
P22/SCK8
P21/SIN8
P20/SOUT8
P17/TIOB7/INT7
P16/TIOA7/SCK3/INT6
P15/TIOB6/SIN3/INT5
P14/TIOA6/SOUT3/INT4
P13/TIOB5/INT3
P12/TIOA5/SCK2/INT2
P11/TIOB4/SIN2/INT1
P10/TIOA4/SOUT2/INT0
P07/TIOB3
P06/TIOA3/SCK1
P05/TIOB2/SIN1
P04/TIOA2/SOUT1
P03/TIOB1/IN3
P02/TIOA1/SCK0_1/IN2
P01/TIOB0/SIN0_1/IN1
P00/TIOA0/SOUT0_1/IN0
ICD3*
ICD2*
ICD1*
ICD0*
C
119
118
117
116
115
114
113
112
111
110
109
108
107
106
105
104
103
102
101
100
99
98
97
96
95
94
93
92
91
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
53
54
55
56
ROUT
GOUT
BOUT
VCC
60
52
VRO
C
51
VREF
59
50
VSSD
VDDD
VSS
49
58
48
CPO
57
47
VCI
UDP
46
VDDP
UDM
45
40
VOB
VSSP
39
VOA2
44
38
VOA1
HSYNC
37
VOA0
43
36
B4
VSYNC
35
B3
42
34
B2
DCKI
33
41
32
B1
DCKO
31
B0
LQFP-120
VSS
VCC
P30/SOUT10/INT8
P31/SIN10/INT9
P32/SCK10/INT10
P33/INT11
P34/SOUT11/INT12
P35/SIN11/INT13
P36/SCK11/INT14
P37/INT15
P50
P51
P52
P53
P54/RCIN
P55/ADTRG
P56/FRCK
P57
VSS
R0
R1
R2
R3
R4
G0
G1
G2
G3
G4
G5
VCC
120
(TOP VIEW)
VSS
VCC
ICS2*
ICS1*
ICS0*
IBREAK*
ICLK*
TRST*
AVRH
AVSS
AVCC
P77/AN7/SCK0/TMI2
P76/AN6/SIN0/TMI1
P75/AN5/SOUT0/TMI0
P74/AN4/TMO2
P73/AN3/TMO1/OUT3_1
P72/AN2/TMO0/OUT2_1
P71/AN1/OUT1_1
P70/AN0/OUT0_1
INIT
MD0
MD1
X0
X1
VSS
PK0/X1A
PK1/X0A
HWDE
VCC
VSS
(FPT-120P-M21)
* : N.C. pin for MB91613.
Note : The number after the underscore (“_”) in pin names such as XXX_1 and XXX_2 indicates the port number.
For these pins, there are multiple pins that provide the same function for the same channel. Use the
extended port function register (EPFR) to select the pin.
DS07-16907-3E
7
MB91610 Series
■ PIN DESCRIPTION
The number after the underscore (“_”) in pin names such as XXX_1 and XXX_2 indicates the port number.
For these pins, there are multiple pins that provide the same function for the same channel. Use the extended port
function register (EPFR) to select the pin.
I/O circuit
Pin no.
Pin name
Function
type*
1
VCC
⎯
P30
2
3
4
SOUT10
(SDA10)
General-purpose I/O port
C
7
8
P31
General-purpose I/O port
SIN10
C
Multifunction serial ch.10 input
INT9
External interrupt 9 input
P32
General-purpose I/O port
SCK10
(SCL10)
C
P33
INT11
SOUT11
(SDA11)
Multifunction serial ch.10 clock [operation modes 0 to 2]
I2C ch.10 serial clock line [operation mode 4]
External interrupt 10 input
C
General-purpose I/O port
External interrupt 11 input
General-purpose I/O port
C
Multifunction serial ch.11 output [operation modes 0 to 2]
I2C ch.11 serial data line [operation mode 4]
INT12
External interrupt 12 input
P35
General-purpose I/O port
SIN11
C
Multifunction serial ch.11 input
INT13
External interrupt 13 input
P36
General-purpose I/O port
SCK11
(SCL11)
C
INT14
9
I2C ch.10 serial data line [operation mode 4]
External interrupt 8 input
P34
6
Multifunction serial ch.10 output [operation modes 0 to 2]
INT8
INT10
5
3.3 V power supply
P37
INT15
Multifunction serial ch.11 clock [operation modes 0 to 2]
I2C ch.11 serial clock line [operation mode 4]
External interrupt 14 input
C
General-purpose I/O port
External interrupt 15 input
10
P50
B
General-purpose I/O port
11
P51
B
General-purpose I/O port
(Continued)
8
DS07-16907-3E
MB91610 Series
Pin no.
Pin name
I/O circuit
type*
12
P52
B
General-purpose I/O port
13
P53
B
General-purpose I/O port
P54
14
15
RCIN
P55
ADTRG
16
P56
FRCK
B
B
B
Function
General-purpose I/O port
Remote control I/O
General-purpose I/O port
A/D converter external trigger input
General-purpose I/O port
Free-run timer clock input
17
P57
B
General-purpose I/O port
18
VSS
⎯
GND
19
R0
H
RGB digital output
20
R1
H
RGB digital output
21
R2
H
RGB digital output
22
R3
H
RGB digital output
23
R4
H
RGB digital output
24
G0
H
RGB digital output
25
G1
H
RGB digital output
26
G2
H
RGB digital output
27
G3
H
RGB digital output
28
G4
H
RGB digital output
29
G5
H
RGB digital output
30
VCC
⎯
3.3V power supply
31
VSS
⎯
GND
32
B0
H
RGB digital output
33
B1
H
RGB digital output
34
B2
H
RGB digital output
35
B3
H
RGB digital output
36
B4
H
RGB digital output
37
VOA0
H
Alpha blend output
38
VOA1
H
Alpha blend output
39
VOA2
H
Alpha blend output
(Continued)
DS07-16907-3E
9
MB91610 Series
Pin no.
Pin name
I/O circuit
type*
40
VOB
H
OSD display period output
41
DCKO
H
Dot clock output
42
DCKI
F
Dot clock input
43
VSYNC
F
Vertical synchronous input
44
HSYNC
F
Horizontal synchronous input
45
VSSP
⎯
Dot clock PLL ground
46
VDDP
⎯
Dot clock PLL power supply
47
VCI
⎯
VCO control voltage input
48
CPO
M
Charge pump output
49
VSSD
⎯
RGB analog output GND
50
VDDD
⎯
RGB analog output power supply
51
VREF
M
RGB analog output reference power supply
52
VRO
M
RGB analog output resistance connected pin
53
ROUT
M
R output (analog)
54
GOUT
M
G output (analog)
55
BOUT
M
B output (analog)
56
VCC
⎯
3.3 V power supply
57
UDP
USB
USB pin
58
UDM
USB
USB pin
59
VSS
⎯
GND
60
C
⎯
C pin for a regulator
61
VSS
⎯
GND
62
VCC
⎯
3.3 V power supply
63
HWDE
F
Hardware watchdog enable input
64
65
PK1
X0A
PK0
X1A
G
G
Function
General-purpose I/O port
32kHz oscillation pin
General-purpose I/O port
32 kHz oscillation pin
66
VSS
⎯
GND
67
X1
A
Main oscillation pin
68
X0
A
Main oscillation pin
(Continued)
10
DS07-16907-3E
MB91610 Series
Pin no.
Pin name
I/O circuit
type*
69
MD1
F, L
Mode pin
70
MD0
F, L
Mode pin
71
INIT
F, L
Initial (reset) pin
P70
72
AN0
General-purpose I/O port
D
OUT0_1
AN1
General-purpose I/O port
D
OUT1_1
AN2
TMO0
General-purpose I/O port
D
OUT2_1
AN3
TMO1
D
77
Reload timer ch.1 output
General-purpose I/O port
D
A/D converter ch.4 analog input
TMO2
Reload timer ch.2 output
P75
General-purpose I/O port
AN5
SOUT0
78
A/D converter ch.3 analog input
Output compare ch.3 output (Port 1)
P74
AN4
Reload timer ch.0 output
General-purpose I/O port
OUT3_1
76
A/D converter ch.2 analog input
Output compare ch.2 output (Port 1)
P73
75
A/D converter ch.1 analog input
Output compare ch.1 output (Port 1)
P72
74
A/D converter ch.0 analog input
Output compare ch.0 output (Port 1)
P71
73
Function
D
A/D converter ch.5 analog input
Multifunction serial ch.0 output [operation modes 0 to 2]
TMI0
Reload timer ch.0 input
P76
General-purpose I/O port
AN6
SIN0
TMI1
D
A/D converter ch.6 analog input
Multifunction serial ch.0 input
Reload timer ch.1 input
(Continued)
DS07-16907-3E
11
MB91610 Series
Pin no.
Pin name
I/O circuit
type*
P77
79
AN7
SCK0
Function
General-purpose I/O port
D
TMI2
A/D converter ch.7 analog input
Multifunction serial ch.0 clock [operation modes 0 to 2]
Reload timer ch.2 input
80
AVCC
⎯
A/D converter analog power supply
81
AVSS
⎯
A/D converter GND
82
AVRH
⎯
A/D converter analog reference power supply
83
TRST
E
Tool reset input for DSU4
N.C. pin for MASK products.
84
ICLK
K
Clock pin for DSU4
N.C. pin for MASK products.
85
IBREAK
I
Break pin for DSU4
N.C. pin for MASK products.
86
ICS0
H
DSU4 status
N.C. pin for MASK products.
87
ICS1
H
DSU4 status
N.C. pin for MASK products.
88
ICS2
H
DSU4 status
N.C. pin for MASK products.
89
VCC
⎯
3.3 V power supply
90
VSS
⎯
GND
91
C
⎯
C pin for a regulator
92
ICD0
J
DSU4 data
N.C. pin for MASK products.
93
ICD1
J
DSU4 data
N.C. pin for MASK products.
94
ICD2
J
DSU4 data
N.C. pin for MASK products.
95
ICD3
J
DSU4 data
N.C. pin for MASK products.
P00
96
TIOA0
SOUT0_1
IN0
General-purpose I/O port
B
Base timer ch.0 TIOA
Multifunction serial ch.0 output (Port 1) [operation modes 0 to 2]
Input capture ch.0 input
(Continued)
12
DS07-16907-3E
MB91610 Series
Pin no.
Pin name
I/O circuit
type*
P01
97
98
TIOB0
SIN0_1
B
General-purpose I/O port
B
P03
General-purpose I/O port
B
Base timer ch.1 TIOB
IN3
Input capture ch.3 input
P04
General-purpose I/O port
B
TIOB2
Base timer ch.2 TIOA
Multifunction serial ch.1 output [operation modes 0 to 2]
I2C ch.1 serial data line [operation mode 4]
P05
General-purpose I/O port
B
Base timer ch.2 TIOB
SIN1
Multifunction serial ch.1 input
P06
General-purpose I/O port
TIOA3
B
SCK1
(SCL1)
P07
TIOB3
B
INT0
Multifunction serial ch.1 clock [operation modes 0 to 2]
General-purpose I/O port
Base timer ch.3 TIOB
General-purpose I/O port
TIOA4
SOUT2
(SDA2)
Base timer ch.3 TIOA
I2C ch.1 serial clock line [operation mode 4]
P10
104
Multifunction serial ch.0 clock (Port 1) [operation modes 0 to 2]
Input capture ch.2 input
SOUT1
(SDA1)
103
Base timer ch.1 TIOA
IN2
TIOA2
102
Multifunction serial ch.0 input (Port 1)
P02
TIOB1
101
Base timer ch.0 TIOB
Input capture ch.1 input
SCK0_1
100
General-purpose I/O port
IN1
TIOA1
99
Function
Base timer ch.4 TIOA
B
Multifunction serial ch.2 output [operation modes 0 to 2]
I2C ch.2 serial data line [operation mode 4]
External interrupt 0 input
(Continued)
DS07-16907-3E
13
MB91610 Series
Pin no.
Pin name
I/O circuit
type*
P11
105
TIOB4
SIN2
General-purpose I/O port
B
107
109
P12
General-purpose I/O port
SCK2
(SCL2)
Base timer ch.5 TIOA
B
111
112
Multifunction serial ch.2 clock [operation modes 0 to 2]
I2C ch.2 serial clock line [operation mode 4]
INT2
External interrupt 2 input
P13
General-purpose I/O port
TIOB5
B
Base timer ch.5 TIOB
INT3
External interrupt 3 input
P14
General-purpose I/O port
SOUT3
(SDA3)
Base timer ch.6 TIOA
B
Multifunction serial ch.3 output [operation modes 0 to 2]
I2C ch.3 serial data line [operation mode 4]
INT4
External interrupt 4 input
P15
General-purpose I/O port
TIOB6
SIN3
B
Base timer ch.6 TIOB
Multifunction serial ch.3 input
INT5
External interrupt 5 input
P16
General-purpose I/O port
TIOA7
110
Multifunction serial ch.2 input
External interrupt 1 input
TIOA6
108
Base timer ch.4 TIOB
INT1
TIOA5
106
Function
SCK3
(SCL3)
Base timer ch.7 TIOA
B
Multifunction serial ch.3 clock [operation modes 0 to 2]
I2C ch.3 serial clock line [operation mode 4]
INT6
External interrupt 6 input
P17
General-purpose I/O port
TIOB7
B
Base timer ch.7 TIOB
INT7
External interrupt 7 input
P20
General-purpose I/O port
SOUT8
(SDA8)
C
Multifunction serial ch.8 output [operation modes 0 to 2]
I2C ch.8 serial data line [operation mode 4]
(Continued)
14
DS07-16907-3E
MB91610 Series
(Continued)
Pin no.
Pin name
P21
113
SIN8
I/O circuit
type*
C
P22
114
115
SCK8
(SCL8)
P23
RCIN_1
SOUT9
(SDA9)
C
C
C
C
120
P27
OUT3
VSS
Multifunction serial ch.9 output [operation modes 0 to 2]
I2C ch.9 serial data line [operation mode 4]
Multifunction serial ch.9 input
Output compare ch.1 output
General-purpose I/O port
C
OUT2
119
Remote control I/O (1)
General-purpose I/O port
P26
SCK9
(SCL9)
General-purpose I/O port
Output compare ch.0 output
OUT1
118
Multifunction serial ch.8 clock [operation modes 0 to 2]
General-purpose I/O port
P25
SIN9
Multifunction serial ch.8 input
I2C ch.8 serial clock line [operation mode 4]
OUT0
117
General-purpose I/O port
General-purpose I/O port
P24
116
Function
Multifunction serial ch.9 clock [operation modes 0 to 2]
I2C ch.9 serial clock line [operation mode 4]
Output compare ch.2 output
C
⎯
General-purpose I/O port
Output compare ch.3 output
GND
* : Refer to “■ I/O CIRCUIT TYPE” for details on the I/O circuit types.
DS07-16907-3E
15
MB91610 Series
■ I/O CIRCUIT TYPE
Type
Circuit
Remarks
A
X1
Clock input
• Oscillation feedback resistance
approx.1 MΩ
• With standby control
X0
Standby control
B
•
•
•
•
R
P-ch
R
P-ch
Digital output
N-ch
Digital output
CMOS level output
CMOS level hysteresis input
With pull-up control
With standby control
Note: When this pin is used as an I2C pin, the
digital output P-ch transistor is always
off.
Pull-up control
Digital input
Standby control
(Continued)
16
DS07-16907-3E
MB91610 Series
Type
Circuit
Remarks
C
P-ch
N-ch
Digital output
Digital output
•
•
•
•
CMOS level output
CMOS level hysteresis input
5 V tolerant input
With standby control
Note: When this pin is used as an I2C pin, the
digital output P-ch transistor is always
off.
R
Digital input
Standby control
D
R
P-ch
P-ch
N-ch
R
Digital output
Digital output
•
•
•
•
•
•
CMOS level output
CMOS level hysteresis input
With input control
Analog input
With pull-up control
With standby control
Note: When this pin is used as an I2C pin, the
digital output P-ch transistor is always
off.
Pull-up control
Digital input
Standby control
Analog input
Input control
(Continued)
DS07-16907-3E
17
MB91610 Series
Type
Circuit
Remarks
E
• CMOS level hysteresis input
• With pull-up
R
P-ch
P-ch
N-ch
R
Digital input
F
CMOS level hysteresis input
P-ch
N-ch
R
Digital input
(Continued)
18
DS07-16907-3E
MB91610 Series
Type
Circuit
Remarks
G
X1A
P-ch
Digital output
N-ch
Digital output
• Oscillation feedback resistance
approx.10MΩ
• CMOS level output
• CMOS level hysteresis input
• With standby control
R
Digital input
Standby control
Clock input
Standby control
Digital input
R
X0A
Standby control
P-ch
Digital output
N-ch
Digital output
H
CMOS level output
P-ch
Digital output
N-ch
Digital output
(Continued)
DS07-16907-3E
19
MB91610 Series
Type
Circuit
Remarks
I
• CMOS level hysteresis input
• With Pull-down control
P-ch
N-ch
R
R
Pull-down
control
Digital input
J
• CMOS level output
• CMOS level input
• With Pull-down control
P-ch
Digital output
N-ch
Digital output
R
R
Pull-down
control
Digital input
K
CMOS level output (8 mA)
P-ch
Digital output
N-ch
Digital output
(Continued)
20
DS07-16907-3E
MB91610 Series
(Continued)
Type
Circuit
Remarks
L
• Flash memory product only
• CMOS level hysteresis input
• High voltage control for testing
Flash memory
N-ch
N-ch
Control pin
N-ch
N-ch
N-ch
Mode input
R
M
Analog pin
P-ch
N-ch
USB
USB I/O pin
UDP ( + ) output
UDP ( + ) input
UDP(+)
Differential
UDM(-)
Differential input
UDM ( − ) input
UDM ( − ) output
Direction
DS07-16907-3E
21
MB91610 Series
■ PRECAUTIONS FOR HANDLING THE DEVICES
Any semiconductor devices have inherently a certain rate of failure. The possibility of failure is greatly affected
by the conditions in which they are used (circuit conditions, environmental conditions, etc.). This page describes
precautions that must be observed to minimize the chance of failure and to obtain higher reliability from your
FUJITSU SEMICONDUCTOR semiconductor devices.
1. Precautions for Product Design
This section describes precautions when designing electronic equipment using semiconductor devices.
• Absolute Maximum Ratings
Semiconductor devices can be permanently damaged by application of stress (voltage, current, temperature,
etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
• Recommended Operating Conditions
The recommended operating conditions are required in order to ensure the normal operation of the semiconductor device. All of the device’s electrical characteristics are warranted when the device is operated within these
ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation outside
these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on the data
sheet. Users considering application outside the listed conditions are advised to contact their representatives
beforehand.
• Processing and Protection of Pins
These precautions must be followed when handling the pins which connect semiconductor devices to power
supply and input/output functions.
(1) Preventing Over-Voltage and Over-Current Conditions
Exposure to voltage or current levels in excess of maximum ratings at any pin is likely to cause deterioration
within the device, and in extreme cases leads to permanent damage of the device. Try to prevent such
overvoltage or over-current conditions at the design stage.
(2) Protection of Output Pins
Shorting of output pins to supply pins or other output pins, or connection to large capacitance can cause
large current flows. Such conditions if present for extended periods of time can damage the device.
Therefore, avoid this type of connection.
(3) Handling of Unused Input Pins
Unconnected input pins with very high impedance levels can adversely affect stability of operation. Such pins
should be connected through an appropriate resistance to a power supply pin or ground pin.
- PLL pin for OSD (recommended pin handling when PLL for OSD is not in use)
Pin no.
Pin name Recommended handling of unused pin
45
VSSP
VSS (PLL macro GND)
46
VDDP
VSS (PLL macro power supply)
47
VCI
VSS
48
CPO
VSS
- Analog OSD (recommended pin handling when analog OSD is not in use)
Pin no.
Pin name Recommended handling of unused pin
49
VSSD
VSS (DAC macro GND)
22
DS07-16907-3E
MB91610 Series
50
51
52
53
54
55
VDDD
VREF
VRO
ROUT
GOUT
BOUT
VSS (DAC macro power supply)
VSS
VSS
VSS
VSS
VSS
- Digital OSD (recommended pin handling when digital OSD is not in use)
Pin no.
Pin name Recommended handling of unused pin
19
R0
OPEN
20
R1
OPEN
21
R2
OPEN
22
R3
OPEN
23
R4
OPEN
24
G0
OPEN
25
G1
OPEN
26
G2
OPEN
27
G3
OPEN
28
G4
OPEN
29
G5
OPEN
32
B0
OPEN
33
B1
OPEN
34
B2
OPEN
35
B3
OPEN
36
B4
OPEN
- Other OSD pins
Pin no.
Pin name
37
VOA0
38
VOA1
39
VOA2
40
VOB
41
DCKO
42
DCKI
43
VSYNC
44
HSYNC
Recommended handling of unused pin
OPEN
OPEN
OPEN
OPEN
OPEN
pull-down
pull-down
pull-down
- USB (example of pin handling when USB is not in use)
Pin no.
Pin name Recommended handling of unused pin
57
UDP
pull-down
58
UDM
pull-down
- DSU pin
Pin no.
83
84
85
86
87
88
92
93
94
95
DS07-16907-3E
Pin name
TRST
ICLK
IBREAK
ICS0
ICS1
ICS2
ICD0
ICD1
ICD2
ICD3
Recommended handling of unused pin
Reset signal input from user board
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
OPEN
23
MB91610 Series
• Latch-up
Semiconductor devices are constructed by the formation of P-type and N-type areas on a substrate. When
subjected to abnormally high voltages, internal parasitic PNPN junctions (called thyristor structures) may be
formed, causing large current levels in excess of several hundred mA to flow continuously at the power supply
pin. This condition is called latch-up.
Note: The occurrence of latch-up not only causes loss of reliability in the semiconductor device, but can cause
injury or damage from high heat, smoke or flame. To prevent this from happening, do the following:
(a) Be sure that voltages applied to pins do not exceed the absolute maximum ratings. This should include
attention to abnormal noise, surge levels, etc.
(b) Be sure that abnormal current flows do not occur during the power-on sequence.
• Observance of Safety Regulations and Standards
Most countries in the world have established standards and regulations regarding safety, protection from electromagnetic interference, etc. Customers are requested to observe applicable regulations and standards in the
design of products.
• Fail-Safe Design
Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or
loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions.
• Precautions Related to Usage of Devices
FUJITSU SEMICONDUCTOR semiconductor devices are intended for use in standard applications (computers,
office automation and other office equipment, industrial, communications, and measurement equipment, personal or household devices, etc.).
CAUTION: Customers considering the use of our products in special applications where failure or abnormal
operation may directly affect human lives or cause physical injury or property damage, or where extremely high
levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters,
vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU Semiconductor sales representatives before such use. The company will not be responsible for damages arising from
such use without prior approval.
24
DS07-16907-3E
MB91610 Series
2. Precautions for Package Mounting
Package mounting may be either lead insertion type or surface mount type. In either case, for heat resistance
during soldering, you should only mount under FUJITSU SEMICONDUCTOR's recommended conditions. For
detailed information about mount conditions, contact your sales representative.
• Lead Insertion Type
Mounting of lead insertion type packages onto printed circuit boards may be done by two methods: direct
soldering on the board, or mounting by using a socket.
Direct mounting onto boards normally involves processes for inserting leads into through-holes on the board
and using the flow soldering (wave soldering) method of applying liquid solder.
In this case, the soldering process usually causes leads to be subjected to thermal stress in excess of the
absolute ratings for storage temperature. Mounting processes should conform to recommended mounting conditions.
If socket mounting is used, differences in surface treatment of the socket contacts and IC lead surfaces can lead
to contact deterioration after long periods. For this reason it is recommended that the surface treatment of socket
contacts and IC leads be verified before mounting.
• Surface Mount Type
Surface mount packaging has longer and thinner leads than lead-insertion packaging, and therefore leads are
more easily deformed or bent. The use of packages with higher pin counts and narrower pin pitch results in
increased susceptibility to open connections caused by deformed pins, or shorting due to solder bridges.
You must use appropriate mounting techniques. FUJITSU SEMICONDUCTOR recommends the solder reflow
method, and has established a ranking of mounting conditions for each product. Users are advised to mount
packages in accordance with FUJITSU SEMICONDUCTOR ranking of recommended conditions.
• Lead-Free Packaging
Note: When ball grid array (BGA) packages with Sn-Ag-Cu balls are mounted using Sn-Pb eutectic soldering,
junction strength may be reduced under some conditions of use.
• Storage of Semiconductor Devices
Because plastic chip packages are formed from plastic resins, exposure to natural environmental conditions will
cause absorption of moisture. During mounting, the application of heat to a package that has absorbed moisture
can cause surfaces to peel, reducing moisture resistance and causing packages to crack. To prevent, do the
following:
(a) Avoid exposure to rapid temperature changes, which cause moisture to condense inside the product. Store
products in locations where temperature changes are slight.
(b) Use dry boxes for product storage. Products should be stored below 70% relative humidity, and at temperatures between 5 °C and 30 °C. When you open Dry Package that recommends humidity 40% to 70% relative
humidity.
(c) When necessary, FUJITSU SEMICONDUCTOR packages semiconductor devices in highly moisture-resistant aluminum laminate bags, with a silica gel desiccant. Devices should be sealed in their aluminum laminate
bags for storage.
(d) Avoid storing packages where they are exposed to corrosive gases or high levels of dust.
DS07-16907-3E
25
MB91610 Series
• Baking
Packages that have absorbed moisture may be de-moisturized by baking (heat drying). Follow the FUJITSU
SEMICONDUCTOR recommended conditions for baking.
Condition: + 125 °C/24 h
• Static Electricity
Because semiconductor devices are particularly susceptible to damage by static electricity, you must take the
following precautions:
(a) Maintain relative humidity in the working environment between 40% and 70%. Use of an apparatus for ion
generation may be needed to remove electricity.
(b) Electrically ground all conveyors, solder vessels, soldering irons and peripheral equipment.
(c) Eliminate static body electricity by the use of rings or bracelets connected to ground through high resistance
(on the level of 1 MΩ). Wearing of conductive clothing and shoes, use of conductive floor mats and other
measures to minimize shock loads is recommended.
(d) Ground all fixtures and instruments, or protect with anti-static measures.
(e) Avoid the use of styrofoam or other highly static-prone materials for storage of completed board assemblies.
• Precautions for Use Environment
Reliability of semiconductor devices depends on ambient temperature and other conditions as described above.
For reliable performance, do the following:
(1) Humidity
Prolonged use in high humidity can lead to leakage in devices as well as printed circuit boards. If high humidity
levels are anticipated, consider anti-humidity processing.
(2) Discharge of Static Electricity
When high-voltage charges exist close to semiconductor devices, discharges can cause abnormal operation.
In such cases, use anti-static measures or processing to prevent discharges.
(3) Corrosive Gases, Dust, or Oil
Exposure to corrosive gases or contact with dust or oil may lead to chemical reactions that will adversely
affect the device. If you use devices in such conditions, consider ways to prevent such exposure or to protect
the devices.
(4) Radiation, Including Cosmic Radiation
Most devices are not designed for environments involving exposure to radiation or cosmic radiation. Users
should provide shielding as appropriate.
(5) Smoke, Flame
Note : Plastic molded devices are flammable, and therefore should not be used near combustible substances.
If devices begin to smoke or burn, there is danger of the release of toxic gases.
Customers considering the use of FUJITSU SEMICONDUCTOR products in other special environmental conditions should consult with sales representatives.
26
DS07-16907-3E
MB91610 Series
■ HANDLING DEVICES
• Power supply pins
In products with multiple VCC and VSS pins, respective pins at the same potential are interconnected within the
device in order to prevent malfunctions such as latch-up. However, all of these pins should be connected externally
to the power supply or ground lines in order to reduce electromagnetic emission levels, to prevent abnormal
operation of strobe signals caused by the rise in the ground level, and to conform to the total output current rating.
Moreover, connect the current supply source with the VCC and VSS pins of this device at low impedance.
It is also advisable that a ceramic capacitor of approximately 0.1 μF be connected as a bypass capacitor between
VCC and VSS near this device.
• Crystal oscillator circuit
Noise near the X0 and X1 pins may cause the device to malfunction. Design the printed circuit board so that X0,
X1, the crystal oscillator (or ceramic oscillator), and the bypass capacitor to ground are located as close to the
device as possible.
It is strongly recommended that the PC board artwork be designed such that the X0 and X1 pins are surrounded
by ground plane as this is expected to produce stable operation.
• OSDC output pin
The OSDC output pins (R0 to R4, G0 to G5, B0 to B4, VOA0 to VOA2, VOB, DCKO) are high-speed corresponded
output pin.
Adjust the signal waveform such as by inserting damping resistor on the board as needed.
• Using an external clock
When using an external clock, the clock signal should be input to the X0 pin only and the X1 pin should be kept
open.
• Example of Using an External Clock
X0
Open
X1
MB91610 series
• C Pin
As MB91610 series includes an internal regulator, always connect a bypass capacitor of approximately 4.7 μF
to the C pin for use by the regulator.
C
MB91610 series
4.7 µF
VSS
GND
DS07-16907-3E
27
MB91610 Series
• Mode pins (MD0, MD1)
Connect the MD pin (MD0, MD1) directly to VCC or VSS pins. Design the printed circuit board such that the pullup/down resistance stays low, as well as the distance between the mode pins and VCC pins or VSS pins is as
short as possible and the connection impedance is low, when the pins are pulled-up/down such as for switching
the pin level and rewriting the Flash memory data. It is because of preventing the device erroneously switching
to test mode due to noise.
• Notes on power-on
• To ensure that the internal regulator and the oscillator have stabilized immediately after the power is turned
on, keep an “L” level input connected to the INIT pin for the duration of the regulator voltage stabilization wait
time + the oscillator start time of the oscillator + the main oscillator stabilization wait time.
• Turn power on/off in the following order
Turning on : VCC → AVCC → AVRH
Turning off : AVRH → AVCC → VCC
• Release the reset (INIT pin “L” level to “H” level) after the power supply has stabilized.
• Caution on operations during PLL clock mode
On this microcontroller, if in case the crystal oscillator breaks off or an external reference clock input stops while
the PLL clock mode is selected, a self-oscillator circuit contained in the PLL may continue its operation at its
self-running frequency.
However, Fujitsu Semiconductor will not guarantee results of operations if such failure occurs.
28
DS07-16907-3E
MB91610 Series
■ BLOCK DIAGRAM
Step-down regulator
FR80
CPU
DSU4
Crossbar
switch
Internal program
memory
Flash memory
RAM
On-chip bus
DMAC
8 channels
Peripheral bus
bridge
OSDC
USB function /
HOST
Interrupt controller
Delay interrupt
Ports
External interrupt,
16 channels
16-bit reload timer,
3 channels
16-bit peripheral bus
Watchdog timer
32-bit peripheral bus
Clock control
Clock generation
USB clock generation
Watch counter
32-bit free-run timer,
1 channel
Base timer,
8 channels
32-bit output compare,
4 channels
A/D converter, 8 channels
(1 unit)
Ports
32-bit input capture,
4 channels
Multifunction serial interface,
4 channels
HDMI-CEC/
Remote control reception,
1 channel
Multifunction serial interface with FIFO,
4 channels
Ports
DS07-16907-3E
29
MB91610 Series
■ MEMORY SPACE
1. Memory Space
The FR family has 4 Gbytes of logical address space (232 addresses) available to the CPU by linear access.
• Direct Addressing Areas
The following areas in the address space are used as I/O areas.
These areas are called direct addressing areas, and the address of an operand in these areas can be specified
directly within an instruction. The size of the directly addressable area depends on the length of the data being
accessed as follows.
• Byte data access
: 0000 0000H to 0000 00FFH
• Half word data access : 0000 0000H to 0000 01FFH
• Word data access
: 0000 0000H to 0000 03FFH
30
DS07-16907-3E
MB91610 Series
2. Memory Map
MB91613
ROM 512 Kbytes
RAM 32 Kbytes
MB91F610A
FLASH 512 Kbytes
RAM 32 Kbytes
0000 0000H
0000 0000H
I/O area
(Direct addressing)
I/O area
(Direct addressing)
0000 0400H
0000 0400H
I/O area
0001 0000H
I/O area
0001 0000H
Reserved
0003 8000H
Reserved
0003 8000H
Built-in RAM area
32 Kbytes
0004 0000H
Built-in RAM area
32 Kbytes
0004 0000H
Reserved
0008 0000H
Reserved
0008 0000 H
FLASH area
512 Kbytes
000F 8000H
ROM area
512 Kbytes
Small-sector area
0010 0000H
0010 0000H
Reserved
FFFF FFFFH
Reserved
FFFF FFFFH
Notes: • Small sector area is related to flash products only. Please refer to the Flash Memory section of the
Hardware Manual for more details.
• Do not access the reserved areas.
DS07-16907-3E
31
MB91610 Series
■ I/O MAP
[How to read the table]
Address
Register
Block
+0
+1
+2
+3
0000 0000H
PDR0 [R/W] B, H
XXXXXXXX
PDR1 [R/W] B, H
XXXXXXXX
PDR2 [R/W] B, H
XXXXXXXXXXX
PDR3 [R/W] B, H
XXXXXXXX
0000 003CH
WDTCR0 [R/W]
B, H
-0--0000
WDTCPR0 [R/W]
B, H
00000000
⎯
Watchdog
timer
0000 0040H
EIRR0 [R/W] B, H,
W
000 0000
ENIR0 [R/W]
B, H, W
00000000
ELVR0 [R/W] B, H, W
00000000 00000000
External
interrupt
0 to 7
Port data
register
⎯ : Reserved area
Initial value after reset
“1” : Initial value“1”
“0” : Initial value“0”
“X” : Initial value undefined
“ - ” : Reserved bit or undefined bit
Access unit
(B : byte, H : half word, W : word)
Read/write attribute
“R”
: Indicates that there is a read only bit.
“R/W” : Indicates that there is a read/write bit.
“W”
: Indicates that there is a write only bit.
Register name (column 1 of the register is at address 4n, column 2 is
at address 4 n + 2...)
Leftmost register address (For word-length access, column 1 of the
register is the MSB of the data.)
Notes : • When performing a data access, the addresses should be as below.
- Word access : Address should be multiples of 4 (least significant 2 bits should be “00B”)
- Half word access : Address should be multiples of 2 (least significant bit should be “0B”)
- Byte access : ⎯
• Do not access the reserved areas.
32
DS07-16907-3E
MB91610 Series
Register
Address
+0
+1
+2
+3
0000 0000H
PDR0 [R/W] B,H
XXXXXXXX
PDR1 [R/W] B,H
XXXXXXXX
PDR2 [R/W] B,H
XXXXXXXX
PDR3 [R/W] B,H
XXXXXXXX
0000 0004H
⎯
PDR5 [R/W] B,H
XXXXXXXX
⎯
PDR7[R/W] B,H
XXXXXXXX
0000 0008H
to
0000 0010H
⎯
PDRK [R/W] B
------XX
0000 0014H
Block
Port data
register
⎯
0000 0018H
to
0000 001CH
⎯
0000 0020H
RCCR [R/W] B
0---0000
RCST [R/W] B
00000000
RCSHW [R/W] B
00000000
RCDAHW [R/W] B
00000000
0000 0024H
RCDBHW [R/W] B
00000000
⎯
RCADR1 [R/W] B
---00000
RCADR2 [R/W] B
---00000
0000 0028H
RCDTHH [R]
B,H,W
00000000
RCDTHL [R]
B,H,W
00000000
RCDTLH [R]
B,H,W
00000000
RCDTLL [R]
B,H,W
00000000
0000 002CH
RCCKD [R/W] H
---00000 00000000
0000 0030H
to
0000 0038H
⎯
⎯
0000 003CH
WDTCR0[R/W]
B,H
00000000
WDTCPR0[R/W]
B,H
00000000
0000 0040H
EIRR0[R/W]
B,H,W
00000000
ENIR0[R/W]
B,H,W
00000000
0000 0044H
DICR [R/W] B
-------0
HDMI-CEC/
Remote
controller
Reserved
WDTCR1[R] B,H
XXXX0000
WDTCPR1[R/W]
B,H
00000000
ELVR0[R/W] B,H,W
00000000 00000000
⎯
0000 0048H
TMRLRA0 [R/W] H
XXXXXXXX XXXXXXXX
TMR0 [R] H
XXXXXXXX XXXXXXXX
0000 004CH
⎯
TMCSR0 [R/W] H
--000000 --000000
0000 0050H
TMRLRA1 [R/W] H
XXXXXXXX XXXXXXXX
TMR1 [R] H
XXXXXXXX XXXXXXXX
0000 0054H
⎯
TMCSR1 [R/W] H
--000000 --000000
Watchdog
timer
External
interrupt
0 to 7
Delay interrupt
16-bit reload
timer
ch.0
16-bit reload
timer
ch.1
(Continued)
DS07-16907-3E
33
MB91610 Series
Address
Register
+0
+1
+2
+3
0000 0058H
TMRLRA2 [R/W] H
XXXXXXXX XXXXXXXX
TMR2 [R] H
XXXXXXXX XXXXXXXX
0000 005CH
⎯
TMCSR2 [R/W] H
--000000 --000000
0000 0060H
0000 0064H
0000 0068H
0000 006CH
SCR0
[R/W] B,H,W
0--00000
SMR0
[R/W] B,H,W
000-0000
SSR0
[R,R/W] B,H,W
0-000011
RDR0[R]/TDR0[W] B,H,W*1
-------0 00000000
SCR1[R/W]
IBCR1[R,R/W]
B,H,W*2
0--00000
BGR10[R/W]H,W
00000000
SMR1
[R/W] B,H,W
000-0000
ISBA1 [R/W] B,H*2
--------
0000 0074H
SCR2[R/W]
IBCR2[R,R/W]
B,H,W*2
0--00000
SMR2
[R/W] B,H,W
000-0000
ISMK2 [R/W]
B,H*2
--------
ISBA2 [R/W] B,H*2
--------
0000 0080H
SCR3[R/W]
IBCR3[R,R/W]
B,H,W*2
0--00000
SMR3
[R/W] B,H,W
000-0000
0000 008CH
to
0000 00BCH
⎯
ESCR2[R/W]
IBSR2 [R,R/W]
B,H,W*2
-0000000
Multi-function
BGR12[R/W] H,W BGR02[R/W] H,W serial interface
ch.2
00000000
00000000
RDR2[R]/TDR2[W] B,H,W*1
-------0 00000000
⎯
ESCR3[R/W]
IBSR3[R,R/W]
B,H,W*2
-0000000
SSR3
[R,R/W] B,H,W
0-000011
Multi-function
BGR13[R/W] H,W BGR03[R/W] H,W serial interface
ch.3
00000000
00000000
RDR3[R]/TDR3[W] B,H,W*1
-------0 00000000
ISMK3 [R/W]
B,H*2
--------
ESCR1[R/W]
IBSR1[R,R/W]
B,H,W*2
-0000000
SSR2
[R,R/W] B,H,W
0-000011
0000 007CH
0000 0088H
Multi-function
serial interface
ch.0
BGR00[R/W] H,W
00000000
Multi-function
BGR11[R/W] H,W BGR01[R/W] H,W serial interface
ch.1
00000000
00000000
RDR1[R]/TDR1[W] B,H,W*1
-------0 00000000
ISMK1 [R/W]
B,H*2
--------
0000 0084H
16-bit reload
timer
ch.2
ESCR0
[R/W] B,H,W
-0000000
SSR1
[R,R/W] B,H,W
0-000011
0000 0070H
0000 0078H
Block
ISBA3 [R/W] B,H*2
-------⎯
⎯
Reserved
(Continued)
34
DS07-16907-3E
MB91610 Series
Address
0000 00C0H
0000 00C4H
0000 00C8H
Register
+0
+1
0000 00D4H
+3
SSEL0123 [R/W]
B
------00
Multi-function
serial interface
serial clock
selection
⎯
⎯
SCR8 [R/W]
IBCR8 [R,R/W]
B,H,W*2
0--00000
SMR8
[R/W] B,H,W
000-0000
RDR8[R]/TDR8[W] B,H,W*1
-------0 00000000
Reserved
SSR8
[R,R/W] B,H,W
0-000011
ESCR8 [R/W]
IBSR8 [R,R/W]
B,H,W*2
-0000000
BGR18 [R/W] H,W
00000000
BGR08 [R,R/W]
H,W
00000000
0000 00D8H
ISMK8 [R/W]
B,H*2
--------
ISBA8 [R/W] B,H*2
--------
0000 00DCH
FCR18 [R/W]
B,H,W
---00100
FCR08 [R,R/W]
B,H,W
-0000000
FBYTE28 [R/W]
B,H,W
00000000
FBYTE18 [R/W]
B,H,W
00000000
0000 00E0H
SCR9 [R/W]
IBCR9 [R,R/W]
B,H,W*2
0--00000
SMR9
[R/W] B,H,W
000-0000
SSR9
[R,R/W] B,H,W
0-000011
ESCR9 [R/W]
IBSR9[R,R/W]
B,H,W*2
-0000000
0000 00E4H
Block
RDRM0 [R]/
RDRM1 [R]/
RDRM2 [R]/
RDRM3 [R]/
Multi-function
TDRM0[W] B,H,W TDRM1[W] B,H,W TDRM2[W] B,H,W TDRM3[W] B,H,W serial interface
00000000
00000000
00000000
00000000
data register
(mirror)
⎯
0000 00CCH
0000 00D0H
+2
RDR9[R]/TDR9[W] B,H,W*1
-------0 00000000
0000 00E8H
ISMK9 [R/W]
B,H*2
--------
ISBA9 [R/W] B,H*2
--------
0000 00ECH
FCR19 [R/W]
B,H,W
---00100
FCR09 [R,R/W]
B,H,W
-0000000
Multi-function
serial interface
ch. 8 (FIFO)
⎯
BGR19 [R/W] H,W BGR09 [R/W] H,W
00000000
00000000
⎯
FBYTE29 [R/W]
B,H,W
00000000
Multi-function
serial interface
ch. 9 (FIFO)
FBYTE19 [R/W]
B,H,W
00000000
(Continued)
DS07-16907-3E
35
MB91610 Series
Address
0000 00F0H
0000 00F4H
Register
+0
+1
+2
+3
SCR10 [R/W]
IBCR10 [R,R/W]
B,H,W*2
0--00000
SMR10
[R/W] B,H,W
000-0000
SSR10
[R,R/W] B,H,W
0-000011
ESCR10 [R/W]
IBSR10 [R,R/W]
B,H,W*2
-0000000
BGR110 [R/W]
H,W
00000000
BGR010 [R/W]
H,W
00000000
RDR10[R]/TDR10[W] B,H,W*1
-------0 00000000
0000 00F8H
ISMK10 [R/W]
B,H*2
--------
ISBA10 [R/W]
B,H*2
--------
0000 00FCH
FCR110 [R/W]
B,H,W
---00100
FCR010 [R,R/W]
B,H,W
-0000000
FBYTE210 [R/W]
B,H,W
00000000
FBYTE110 [R/W]
B,H,W
00000000
0000 0100H
SCR11 [R/W]
IBCR11 [R,R/W]
B,H,W*2
0--00000
SMR11
[R/W] B,H,W
000-0000
SSR11
[R,R/W] B,H,W
0-000011
ESCR11 [R/W]
IBSR11 [R,R/W]
B,H,W*2
-0000000
BGR111 [R/W]
H,W
00000000
BGR011 [R/W]
H,W
00000000
0000 0104H
RDR11[R]/TDR11[W] B,H,W*1
-------0 00000000
0000 0108H
ISMK11 [R/W]
B,H*2
--------
ISBA11 [R/W]
B,H*2
--------
0000 010CH
FCR111 [R/W]
B,H,W
---00100
FCR011 [R,R/W]
B,H,W
-0000000
0000 0110H
EIRR1[R/W]
B,H,W
00000000
ENIR1[R/W]
B,H,W
00000000
0000 0114H
to
0000 011CH
⎯
⎯
FBYTE211 [R/W]
B,H,W
00000000
Multi-function
serial interface
ch.10
(FIFO)
Multi-function
serial interface
ch.11
(FIFO)
FBYTE111 [R/W]
B,H,W
00000000
ELVR1[R/W] B,H,W
00000000 00000000
⎯
Block
External
interrupt
8 to 15
Reserved
(Continued)
36
DS07-16907-3E
MB91610 Series
Register
Address
+0
+1
0000 0120H
ADCR0[R/W] B,H
000-0000
ADSR0[R,R/W]
B,H
00---000
⎯
0000 0124H
SCCR0[R,R/W]
B,H
1000-000
SFNS0[R/W] B,H
----0000
SCFD0[R] B,H
XXXXXXXX XX-XXXXX
+3
0000 012CH
PCCR0[R,R/W]
B,H
1000-000
PFNS0[R/W] B,H
------00
0000 0130H
PCIS0[R/W] B
00000000
⎯
PCFD0[R] B,H
XXXXXXXX XXXXXXXX
CMPD0[R/W] B,H
00000000
ADST00[R/W] B,H ADST10[R/W] B,H
00100000
00100000
0000 0140H
0000 0144H
0000 0148H
BT0TMR[R]H
00000000 00000000
⎯
0000 0154H
0000 0158H
0000 015CH
ADCT0[R/W] B
-----111
⎯
Reserved
BT0TMCR[R/W] B,H
-0000000 00000000
BT0STC[R/W]B
0000-000
⎯
BT0PDUT/BT0PRLH/BT0DTBF
[R/W]H
XXXXXXXX XXXXXXXX
BT0PCSR/BT0PRLL[R/W]H
XXXXXXXX XXXXXXXX
Base timer ch.0
⎯
0000 014CH
0000 0150H
CMPCR0[R/W]
B,H
00000000
⎯
0000 013CH
A/D converter
ADSS00[R/W] B
00000000
⎯
0000 0134H
Block
SCIS00[R/W] B
00000000
⎯
0000 0128H
0000 0138H
+2
BT1TMR[R]H
00000000 00000000
⎯
BT1TMCR[R/W] B,H
-0000000 00000000
BT1STC[R/W]B
0000-000
⎯
BT1PDUT/BT1PRLH/BT1DTBF
[R/W]H
XXXXXXXX XXXXXXXX
BT1PCSR/BT1PRLL[R/W]H
XXXXXXXX XXXXXXXX
Base timer ch.1
⎯
(Continued)
DS07-16907-3E
37
MB91610 Series
Address
0000 0160H
0000 0164H
0000 0168H
Register
+0
+1
BT2TMR[R]H
00000000 00000000
0000 0174H
0000 0178H
0000 017CH
+3
Block
BT2TMCR [R/W] B,H
-0000000 00000000
BT2STC[R/W]B
0000-000
⎯
⎯
BT2PDUT/BT2PRLH/BT2DTBF
[R/W]H
XXXXXXXX XXXXXXXX
BT2PCSR/BT2PRLL[R/W]H
XXXXXXXX XXXXXXXX
Base timer ch.2
⎯
0000 016CH
0000 0170H
+2
BT3TMR[R]H
00000000 00000000
BT3TMCR[R/W] B,H
-0000000 00000000
BT3STC[R/W]B
0000-000
⎯
⎯
BT3PDUT/BT3PRLH/BT3DTBF
[R/W]H
XXXXXXXX XXXXXXXX
BT3PCSR/BT3PRLL[R/W]H
XXXXXXXX XXXXXXXX
BTSEL0123 [R/W]
B
00000000
Base timer ch.3
⎯
0000 0180H
to
0000 01A8H
⎯
Reserved
0000 01ACH
ADCHE [R/W] B,H,W
-------- -------- -------- 11111111
A/D channel
enable
0000 01B0H
IRPR0H [R] B
000-----
0000 01B4H
⎯
0000 01B8H
IRPR4H [R] B,H,W
0000----
0000 01BCH
IRPR1H [R] B,H
000-000-
⎯
IRPR1L [R] B,H
000-000-
IRPR2L [R] B,H,W IRPR3H [R] B,H,W
000----0000----
⎯
⎯
IRPR5H [R] B,H,W IRPR5L [R] B,H,W
0000---0000----
⎯
IRPR7L [R] B,H,W
0000----
0000 01C0H
to
0000 01FCH
⎯
0000 0200H
CPCLR0 [R/W] W
11111111 11111111 11111111 11111111
0000 0204H
TCDT0 [R/W] W
00000000 00000000 00000000 00000000
0000 0208H
TCCSH0 [R/W]
B,H
0-----00
TCCSL0 [R/W]
B,H
-1-00000
Interrupt
request batch
read function
Reserved
32-bit Free-run
timer ch.0
⎯
(Continued)
38
DS07-16907-3E
MB91610 Series
Address
Register
+0
+1
+2
+3
0000 020CH
IPCP0 [R] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0210H
IPCP1 [R] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0214H
IPCP2 [R] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0218H
IPCP3 [R] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 021CH
ICS01 [R/W] B
00000000
⎯
⎯
0000 0220H
to
0000 0230H
⎯
0000 0234H
OCCP0 [R/W] W
00000000 00000000 00000000 00000000
0000 0238H
OCCP1 [R/W] W
00000000 00000000 00000000 00000000
0000 023CH
OCCP2 [R/W] W
00000000 00000000 00000000 00000000
0000 0240H
OCCP3 [R/W] W
00000000 00000000 00000000 00000000
0000 0244H
OCSH1 [R/W]
B,H,W
---0--00
OCSL0 [R/W]
B,H,W
0000--00
0000 0248H
to
0000 031CH
0000 0320H
0000 0338H
ICS23 [R/W] B
00000000
32-bit Output
compare
ch.0 to ch.3
OCSL2 [R/W]
B,H,W
0000--00
⎯
0000 0324H
to
0000 0334H
Reserved
⎯
FSTR[R] B
-------1
⎯
0000 033CH
⎯
0000 0340H
to
0000 037CH
⎯
Flash memory
control
Reserved
WREN[R/W] B,H
00000000 00000000
⎯
32-bit Input
capture
ch.0 to ch.3
Reserved
OCSH3 [R/W]
B,H,W
---0--00
FCTLR[R/W] H
-0--1011 --------
Block
Wild register
Reserved
(Continued)
DS07-16907-3E
39
MB91610 Series
Address
Register
+0
+1
+2
0000 0380H
WRAR00[R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 0384H
WRDR00[R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0388H
WRAR01[R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 038CH
WRDR01[R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0390H
WRAR02[R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 0394H
WRDR02[R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0398H
WRAR03[R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 039CH
WRDR03[R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03A0H
WRAR04[R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03A4H
WRDR04[R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03A8H
WRAR05[R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03ACH
WRDR05[R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03B0H
WRAR06[R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03B4H
WRDR06[R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03B8H
WRAR07[R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03BCH
WRDR07[R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03C0H
WRAR08[R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03C4H
WRDR08[R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03C8H
WRAR09[R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03CCH
WRDR09[R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
+3
Block
Wild register
(Continued)
40
DS07-16907-3E
MB91610 Series
Address
Register
+0
+1
+2
+3
0000 03D0H
WRAR10[R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03D4H
WRDR10[R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03D8H
WRAR11[R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03DCH
WRDR11[R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03E0H
WRAR12[R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03E4H
WRDR12[R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03E8H
WRAR13[R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03ECH
WRDR13[R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03F0H
WRAR14[R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03F4H
WRDR14[R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 03F8H
WRAR15[R/W] W
-------- --XXXXXX XXXXXXXX XXXXXX--
0000 03FCH
WRDR15[R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0400H
DDR0 [R/W] B,H
00000000
DDR1 [R/W] B,H
00000000
DDR2 [R/W] B,H
00000000
DDR3 [R/W] B,H
00000000
0000 0404H
⎯
DDR5 [R/W] B,H
00000000
⎯
DDR7[R/W] B,H
00000000
0000 0408H
to
0000 0410H
0000 0414H
⎯
DDRK [R/W] B
------00
Wild register
Data direction
register
⎯
0000 0418H
to
0000 041CH
⎯
0000 0420H
PCR0 [R/W] B,H
00000000
PCR1 [R/W] B,H
00000000
0000 0424H
⎯
PCR5 [R/W] B
00000000
0000 0428H
to
0000 043CH
Block
⎯
⎯
PCR7[R/W] B,H
00000000
Pull-up control
register
⎯
(Continued)
DS07-16907-3E
41
MB91610 Series
Address
Register
+0
+1
+2
+3
0000 0440H
ICR00 [R,R/W]
B,H,W
---11111
ICR01 [R,R/W]
B,H,W
---11111
ICR02 [R,R/W]
B,H,W
---11111
ICR03 [R,R/W]
B,H,W
---11111
0000 0444H
ICR04 [R,R/W]
B,H,W
---11111
ICR05 [R,R/W]
B,H,W
---11111
ICR06 [R,R/W]
B,H,W
---11111
ICR07 [R,R/W]
B,H,W
---11111
0000 0448H
ICR08 [R,R/W]
B,H,W
---11111
ICR09 [R,R/W]
B,H,W
---11111
ICR10 [R,R/W]
B,H,W
---11111
ICR11 [R,R/W]
B,H,W
---11111
0000 044CH
ICR12 [R,R/W]
B,H,W
---11111
ICR13 [R,R/W]
B,H,W
---11111
ICR14 [R,R/W]
B,H,W
---11111
ICR15 [R,R/W]
B,H,W
---11111
0000 0450H
ICR16 [R,R/W]
B,H,W
---11111
ICR17 [R,R/W]
B,H,W
---11111
ICR18 [R,R/W]
B,H,W
---11111
ICR19 [R,R/W]
B,H,W
---11111
0000 0454H
ICR20 [R,R/W]
B,H,W
---11111
ICR21 [R,R/W]
B,H,W
---11111
ICR22 [R,R/W]
B,H,W
---11111
ICR23 [R,R/W]
B,H,W
---11111
0000 0458H
ICR24 [R,R/W]
B,H,W
---11111
ICR25 [R,R/W]
B,H,W
---11111
ICR26 [R,R/W]
B,H,W
---11111
ICR27 [R,R/W]
B,H,W
---11111
0000 045CH
ICR28 [R,R/W]
B,H,W
---11111
ICR29 [R,R/W]
B,H,W
---11111
ICR30 [R,R/W]
B,H,W
---11111
ICR31 [R,R/W]
B,H,W
---11111
0000 0460H
ICR32 [R,R/W]
B,H,W
---11111
ICR33 [R,R/W]
B,H,W
---11111
ICR34 [R,R/W]
B,H,W
---11111
ICR35 [R,R/W]
B,H,W
---11111
0000 0464H
ICR36 [R,R/W]
B,H,W
---11111
ICR37 [R,R/W]
B,H,W
---11111
ICR38 [R,R/W]
B,H,W
---11111
ICR39 [R,R/W]
B,H,W
---11111
0000 0468H
ICR40 [R,R/W]
B,H,W
---11111
ICR41 [R,R/W]
B,H,W
---11111
ICR42 [R,R/W]
B,H,W
---11111
ICR43 [R,R/W]
B,H,W
---11111
0000 046CH
ICR44 [R,R/W]
B,H,W
---11111
ICR45 [R,R/W]
B,H,W
---11111
ICR46 [R,R/W]
B,H,W
---11111
ICR47 [R,R/W]
B,H,W
---11111
0000 0470H
to
0000 047CH
0000 0480H
0000 0484H
⎯
RSTRR [R] B,H,W
11XX---X*3
RSTCR [R/W]
B,H,W
000----0
Interrupt
control
Reserved
STBCR [R/W]
B,H,W
0000--11
⎯
Block
SLPRR [R/W]
B,H,W
00000000
Reset control/
Power
consumption
control
(Continued)
42
DS07-16907-3E
MB91610 Series
Address
0000 0488H
Register
+0
+1
+2
+3
DIVR0 [R/W] B,H
000--011
⎯
DIVR2 [R/W] B
0011----
⎯
⎯
0000 048CH
0000 0490H
IORR0 [R/W]
B,H,W
-0000000
IORR1 [R/W]
B,H,W
-0000000
IORR2 [R/W]
B,H,W
-0000000
IORR3 [R/W]
B,H,W
-0000000
0000 0494H
IORR4 [R/W]
B,H,W
-0000000
IORR5 [R/W]
B,H,W
-0000000
IORR6 [R/W]
B,H,W
-0000000
IORR7 [R/W]
B,H,W
-0000000
0000 0498H
to
0000 049CH
⎯
PFR0 [R/W] B,H
00000000
PFR1 [R/W] B,H
00000000
PFR2 [R/W] B,H
00000000
PFR3 [R/W] B,H
00000000
0000 04A4H
⎯
PFR5 [R/W] B,H
00000000
⎯
PFR7[R/W] B,H
00000000
⎯
0000 04B4H
PFRK [R/W] B,H
----0000
0000 04B8H
EPFR0 [R/W] B,H EPFR1 [R/W] B,H
---00-00
---00-00
⎯
0000 04BCH
⎯
EPFR6 [R/W] B,H EPFR7 [R/W] B,H
-00-00-0
----0-0-
0000 04C0H
EPFR8 [R/W] B,H EPFR9 [R/W] B,H
----0-0----00-0
EPFR10 [R/W]
B,H
----0---
⎯
0000 04C4H
⎯
EPFR14 [R/W]
B,H
----0-0-
EPFR15 [R/W]
B,H
----0-0-
0000 04C8H
EPFR17 [R/W]
B,H
----0-0-
⎯
EPFR19 [R/W]
B,H
-------1
0000 04CCH
EPFR20 [R/W]
B,H
---0--0-
EPFR21 [R/W]
B,H
---0--0-
EPFR22 [R/W]
B,H
---0--0-
EPFR23 [R/W]
B,H
---0--0-
EPFR34 [R/W]
B,H
--0-----
⎯
0000 04D0H,
0000 04D4H
0000 04DCH
Peripheral DMA
transmission
request control
Port function
register
⎯
EPFR16 [R/W]
B,H
----0-0-
0000 04D8H
Clock division
control
Reserved
0000 04A0H
0000 04A8H
to
0000 04B0H
Block
Extended port
function
register
⎯
⎯
EPFR33 [R/W]
B,H
---0--0⎯
(Continued)
DS07-16907-3E
43
MB91610 Series
Address
Register
+0
+1
0000 04E0H
to
0000 04ECH
+2
+3
⎯
Reserved
0000 04F0H
ICSEL0[R/W]
B,H,W
-----000
ICSEL1[R/W]
B,H,W
-----000
0000 04F4H
ICSEL4[R/W]
B,H,W
------00
⎯
ICSEL6[R/W]
B,H,W
------00
ICSEL7[R/W]
B,H,W
-------0
0000 04F8H
ICSEL8[R/W]
B,H,W
------00
⎯
ICSEL10[R/W]
B,H,W
----0000
ICSEL11[R/W]
B,H,W
----0000
⎯
0000 04FCH
⎯
0000 0500H
to
0000 050CH
⎯
0000 0510H
0000 0514H
CSELR [R/W]
B,H,W
001---00
CMONR [R]
B,H,W
001---00
PLLCR [R/W] B,H
--000000 11110000
0000 0518H
WCRD [R] B,H
--000000
0000 051CH
UCCR [R/W] B
-----001
WCRL [R/W] B,H
--000000
MTMCR [R/W]
B,H,W
00001111
STMCR [R/W]
B,H,W
0000-111
CSTBR [R/W] B
-0000000
⎯
Clock
generation/
Main timer/
Sub timer
WCCR [R,R/W] B
00--0000
⎯
Clock counter
⎯
⎯
0000 0C00H
DCCR0 [R/W] W
0----000 --00--00 00000000 0-000000
DCSR0 [R,R/W] H
0------- -----000
DTCR0 [R/W] H
00000000 00000000
DSAR0 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C0CH
DDAR0 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C10H
DCCR1 [R/W] W
0----000 --00--00 00000000 0-000000
DCSR1 [R,R/W] H
0------- -----000
USB clock
generation
Reserved
0000 0C08H
0000 0C14H
DMA start
request clear
select function
Reserved
0000 0520H
to
0000 0BFCH
0000 0C04H
Block
DMAC
DTCR1 [R/W] H
00000000 00000000
0000 0C18H
DSAR1 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C1CH
DDAR1 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
(Continued)
44
DS07-16907-3E
MB91610 Series
Address
0000 0C20H
0000 0C24H
0000 0C28H
0000 0C2CH
0000 0C30H
0000 0C34H
0000 0C38H
0000 0C3CH
0000 0C40H
0000 0C44H
0000 0C48H
0000 0C4CH
0000 0C50H
0000 0C54H
0000 0C58H
0000 0C5CH
0000 0C60H
0000 0C64H
0000 0C68H
0000 0C6CH
0000 0C70H
0000 0C74H
Register
+1
+2
+3
DCCR2 [R/W] W
0----000 --00--00 00000000 0-000000
DCSR2 [R,R/W] H
DTCR2 [R/W] H
0------- -----000
00000000 00000000
DSAR2 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
DDAR2 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
DCCR3 [R/W] W
0----000 --00--00 00000000 0-000000
DCSR3 [R,R/W] H
DTCR3 [R/W] H
0------- -----000
00000000 00000000
DSAR3 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
DDAR3 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
DCCR4 [R/W] W
0----000 --00--00 00000000 0-000000
DCSR4 [R,R/W] H
DTCR4 [R/W] H
0------- -----000
00000000 00000000
DSAR4 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
DDAR4 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
DCCR5 [R/W] W
0----000 --00--00 00000000 0-000000
DCSR5 [R,R/W] H
DTCR5 [R/W] H
0------- -----000
00000000 00000000
DSAR5 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
DDAR5 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
DCCR6 [R/W] W
0----000 --00--00 00000000 0-000000
DCSR6 [R,R/W] H
DTCR6 [R/W] H
0------- -----000
00000000 00000000
DSAR6 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
DDAR6 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
DCCR7 [R/W] W
0----000 --00--00 00000000 0-000000
DCSR7 [R,R/W] H
DTCR7 [R/W] H
0------- -----000
00000000 00000000
+0
Block
DMAC
(Continued)
DS07-16907-3E
45
MB91610 Series
Address
Register
+0
+1
+2
+3
0000 0C78H
DSAR7 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C7CH
DDAR7 [R/W] W
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 0C80H
to
0000 0DF0H
⎯
DMAC
DILVR [R,R/W] B
---11111
⎯
0000 0DF4H
0000 0DF8H
DMACR [R/W] W
0------- -------- 0------- --------
0000 0DFCH
to
0000 0F3CH
⎯
0000 0F40H
0000 0F44H
0000 0F48H
BT4TMR[R]H
00000000 00000000
⎯
0000 0F54H
0000 0F58H
0000 0F64H
0000 0F68H
0000 0F6CH
⎯
BT4PDUT/BT4PRLH/BT4DTBF
[R/W]H
XXXXXXXX XXXXXXXX
BT4PCSR/BT4PRLL[R/W]H
XXXXXXXX XXXXXXXX
Base timer ch.4
⎯
BT5TMR[R]H
00000000 00000000
⎯
BT5TMCR[R/W] B,H
-0000000 00000000
BT5STC[R/W]B
0000-000
⎯
BT5PDUT/BT5PRLH/BT5DTBF
[R/W]H
XXXXXXXX XXXXXXXX
BT5PCSR/BT5PRLL[R/W]H
XXXXXXXX XXXXXXXX
Base timer ch.5
⎯
0000 0F5CH
0000 0F60H
Reserved
BT4TMCR[R/W] B,H
-0000000 00000000
BT4STC[R/W]B
0000-000
0000 0F4CH
0000 0F50H
Block
BT6TMR[R]H
00000000 00000000
⎯
BT6TMCR[R/W] B,H
-0000000 00000000
BT6STC[R/W]B
0000-000
⎯
BT6PDUT/BT6PRLH/BT6DTBF
[R/W]H
XXXXXXXX XXXXXXXX
BT6PCSR/BT6PRLL[R/W]H
XXXXXXXX XXXXXXXX
Base timer ch.6
⎯
(Continued)
46
DS07-16907-3E
MB91610 Series
Register
Address
+0
+2
BT7TMR[R]H
00000000 00000000
0000 0F70H
BT7PDUT/BT7PRLH/BT7DTBF
[R/W]H
XXXXXXXX XXXXXXXX
BTSEL4567 [R/W]
B
00000000
Base timer ch.7
⎯
0000 0F80H
to
0000 0FF8H
⎯
Reserved
BTSSSR[W] H
XXXXXXXX XXXXXXXX
⎯
0000 0FFCH
Block
⎯
BT7PCSR/BT7PRLL[R/W]H
XXXXXXXX XXXXXXXX
0000 0F78H
+3
BT7TMCR[R/W] B,H
-0000000 00000000
BT7STC[R/W]B
0000-000
⎯
0000 0F74H
0000 0F7CH
+1
0000 1000H
to
0000 20FCH
⎯
Base Timer
I/O Select
Function
Reserved
0000 2100H
HCNT1[R/W] B,H
-----001
HCNT0[R/W] B,H
00000000
⎯
0000 2104H
HERR[R/W] B,H
00000011
HIRQ[R/W] B,H
0-000000
⎯
0000 2108H
HFCOMP[R/W]
B,H
00000000
HSTATE[R,R/W]
B,H
---10010
⎯
0000 210CH
HRTIMER1[R/W]
B,H
00000000
HRTIMER0[R/W]
B,H
00000000
⎯
0000 2110H
HADR[R/W] B,H
-0000000
HRTIMER2[R/W]
B,H
------00
⎯
0000 2114H
HEOF1[R/W] B,H
--000000
HEOF0[R/W] B,H
00000000
⎯
0000 2118H
HFRAME1[R/W]
B,H
-----000
HFRAME0[R/W]
B,H
00000000
⎯
0000 211CH
⎯
HTOKEN[R/W] B
00000000
⎯
0000 2120H
⎯
UDCC[R/W] B
1010--00
⎯
USB function /
HOST
(Continued)
DS07-16907-3E
47
MB91610 Series
Address
Register
+0
+1
+2
+3
0000 2124H
EP0C[R/W] H
------0- -1000000
⎯
0000 2128H
EP1C[R/W] H
01100001 00000000
⎯
0000 212CH
EP2C[R/W] H
0110000- -1000000
⎯
0000 2130H
EP3C[R/W] H
0110000- -1000000
⎯
0000 2134H
EP4C[R/W] H
0110000- -1000000
⎯
0000 2138H
EP5C[R/W] H
0110000- -1000000
⎯
0000 213CH
TMSP[R] H
-----000 00000000
⎯
0000 2140H
UDCIE[R,R/W]
B,H
--000000
UDCS[R/W] B,H
--000000
Block
⎯
0000 2144H
EP0IS[R/W] H
10---1-- --------
⎯
0000 2148H
EP00S[R,R/W] H
100--00- -XXXXXXX
⎯
0000 214CH
EP1S[R,R/W] H
100-000X XXXXXXXX
⎯
0000 2150H
EP2S[R,R/W] H
100-000- -XXXXXXX
⎯
0000 2154H
EP3S[R,R/W] H
100-000- -XXXXXXX
⎯
0000 2158H
EP4S[R,R/W] H
100-000- -XXXXXXX
⎯
0000 215CH
EP5S[R,R/W] H
100-000- -XXXXXXX
⎯
0000 2160H
EP0DTH [R/W]
B,H XXXXXXXX
EP0DTL [R/W]
B,H XXXXXXXX
⎯
0000 2164H
EP1DTH [R/W]
B,H XXXXXXXX
EP1DTL [R/W]
B,H XXXXXXXX
⎯
0000 2168H
EP2DTH [R/W]
B,H XXXXXXXX
EP2DTL [R/W]
B,H XXXXXXXX
⎯
0000 216CH
EP3DTH [R/W]
B,H XXXXXXXX
EP3DTL [R/W]
B,H XXXXXXXX
⎯
USB function /
HOST
(Continued)
48
DS07-16907-3E
MB91610 Series
Address
Register
+0
+1
+2
0000 2170H
EP4DTH [R/W]
B,H XXXXXXXX
EP4DTL [R/W]
B,H XXXXXXXX
⎯
0000 2174H
EP5DTH [R/W]
B,H XXXXXXXX
EP5DTL [R/W]
B,H XXXXXXXX
⎯
0000 2178H
to
0000 217CH
⎯
0000 2180H
to
0000 21A0H
⎯
0000 21A4H
DREQSEL [R/W]
B,H
00111011
USBSEL [R/W]
B,H
-------0
+3
Block
USB function /
HOST
Reserved
USBEN [R/W] B
-------0
0000 21A8H
to
0000 3FFCH
⎯
0000 4000H
MOSD_VADR [W] W
-------- -------0 ---00000 --000000
0000 4004H
MOSD_CDS1 [W] W
00000000 ---00000 00000000 00000000
0000 4008H
MOSD_CDS2 [W] W
-------- 0000-000 --000000 00000000
0000 400CH
MOSD_LDS1 [W] W
0000-000 00000000 ----0000 00000000
0000 4010H
MOSD_LDS2 [W] W
-------- ---00000 --000000 00000000
0000 4014H
MOSD_SCOC [W] W
------00 0000---- ---0---0 XXXX----
0000 4018H
MOSD_HVDP [W] W
-----000 00000000 -----000 00000000
0000 401CH
MOSD_TSBC [W] W
-------- -------- -------0 00000000
0000 4020H
MOSD_GRCC [W] W
-------0 00000000 -------0 00000000
0000 4024H
MOSD_SBCC [W] W
-----000 ------00 --000000 00000000
0000 4028H
MOSD_SCBC [W] W
-------- --00--00 ---0-000 00000000
0000 402CH
MOSD_WPC1 [W] W
-----000 00000000 -----000 00000000
⎯
DMA transfer
request
selector/
USB enable
Reserved
OSDC (MAIN)
(Continued)
DS07-16907-3E
49
MB91610 Series
Address
Register
+0
+1
+2
0000 4030H
MOSD_WPC2 [W] W
----0000 00000000 ----0000 00000000
0000 4034H
MOSD_SPC1 [W] W
---0-000 ------00 --000000 00000000
0000 4038H
MOSD_SPC2 [W] W
----0000 00000000 -----000 00000000
0000 403CH
MOSD_SYNC [W] W
-------- --000000 -------- -0-0----
0000 4040H
MOSD_CBC0 [W] W
--000000 00000000 --000000 00000000
0000 4044H
MOSD_CBC1 [W] W
--000000 00000000 --000000 00000000
0000 4048H
MOSD_CBC2 [W] W
--000000 00000000 --000000 00000000
0000 404CH
MOSD_CBC3 [W] W
--000000 00000000 --000000 00000000
0000 4050H
MOSD_CBC4 [W] W
--000000 00000000 --000000 00000000
0000 4054H
MOSD_CBC5 [W] W
--000000 00000000 --000000 00000000
0000 4058H
MOSD_CBC6 [W] W
--000000 00000000 --000000 00000000
0000 405CH
MOSD_CBC7 [W] W
--000000 00000000 --000000 00000000
0000 4060H
MOSD_IOTC [W] W
-------0 0----00- -------- -----XXX
0000 4064H
MOSD_CDP1 [W] W
-----000 00000000 -----000 00000000
0000 4068H
MOSD_CDP2 [W] W
----0000 00000000 ----0000 00000000
0000 406CH
MOSD_INTC [R/W] W
-------- -------- -----XXX -----XXX
0000 4070H
MOSD_SBC0 [W] W
00000000 00000000 00000000 00000000
0000 4074H
MOSD_SBC1 [W] W
00000000 00000000 00000000 00000000
0000 4078H
MOSD_SBC2 [W] W
00000000 00000000 00000000 00000000
0000 407CH
MOSD_SBC3 [W] W
00000000 00000000 00000000 00000000
+3
Block
OSDC (MAIN)
(Continued)
50
DS07-16907-3E
MB91610 Series
Address
0000 4080H
to
0000 40FCH
0000 4100H
0000 4104H
0000 4108H
0000 410CH
0000 4110H
0000 4114H
0000 4118H
0000 411CH
0000 4120H
0000 4124H
0000 4128H
0000 412CH
0000 4130H
0000 4134H
0000 4138H
0000 413CH
to
0000 4168H
0000 416CH
0000 4170H
0000 4174H
0000 4178H
0000 417CH
Register
+0
+1
+2
⎯
SOSD_VADR [W] W
-------- -------0 ---00000 --000000
SOSD_CDS1 [W] W
00000000 ---00000 00000000 00000000
SOSD_CDS2 [W] W
-------- 0000-000 --000000 00000000
SOSD_LDS1 [W] W
0000-000 00000000 ----0000 00000000
SOSD_LDS2 [W] W
-------- ---00000 --000000 00000000
SOSD_SCOC [W] W
------00 0000---- ---0---0 XX-X---X
SOSD_HVDP [W] W
-----000 00000000 -----000 00000000
SOSD_TSBC [W] W
-------- -------- -------0 00000000
SOSD_GRCC [W] W
-------0 00000000 -------0 00000000
⎯
SOSD_SCBC [W] W
-------- --00--00 ---0-000 00000000
SOSD_WPC1 [W] W
-----000 00000000 -----000 00000000
SOSD_WPC2 [W] W
----0000 00000000 ----0000 00000000
SOSD_SPC1 [W] W
---0-000 ------00 --000000 00000000
SOSD_SPC2 [W] W
----0000 00000000 -----000 00000000
+3
Block
Reserved
OSDC (SUB)
⎯
SOSD_INTC [R/W] W
-------- -------- -----XXX -----XXX
SOSD_SBC0 [W] W
00000000 00000000 00000000 00000000
SOSD_SBC1 [W] W
00000000 00000000 00000000 00000000
SOSD_SBC2 [W] W
00000000 00000000 00000000 00000000
SOSD_SBC3 [W] W
00000000 00000000 00000000 00000000
(Continued)
DS07-16907-3E
51
MB91610 Series
(Continued)
Address
Register
+0
+1
+2
0000 4180H
to
0000 41FCH
⎯
0000 4200H
to
0000 43FCH
MOSD_PLn [W] W (n: 0 to 127)
00000000 00000000 00000000 00000000
0000 4400H
MOSD_OSDC [W] W
-------- --XX--XX ------XX ---X---X
0000 4404H
MOSD_PLLC [W] W
--000000 00000000 00000000 ---00000
0000 4408H
to
0000 FFFCH
⎯
+3
Block
Reserved
OSDC (MAIN)
Reserved
*1 : Byte access is available only when accessing the lower 8 bits within 9 bits.
*2 : The register of I2C can not be read immediate after reset.
*3 : Value just after reset by INIT pin.
Do not access the reserved areas.
52
DS07-16907-3E
MB91610 Series
■ VECTOR TABLE
Interrupt
number
Interrupt source (Peripheral resource)
Interrupt
level setting
register
Offset
Address of
TBR default
Decimal
Hexadecimal
Reset
0
00
⎯
3FCH
000F FFFCH
System reserved
1
01
⎯
3F8H
000F FFF8H
System reserved
2
02
⎯
3F4H
000F FFF4H
System reserved
3
03
⎯
3F0H
000F FFF0H
System reserved
4
04
⎯
3ECH
000F FFECH
System reserved
5
05
⎯
3E8H
000F FFE8H
System reserved
6
06
⎯
3E4H
000F FFE4H
System reserved
7
07
⎯
3E0H
000F FFE0H
System reserved
8
08
⎯
3DCH
000F FFDCH
INTE instruction
9
09
⎯
3D8H
000F FFD8H
Instruction break exception
10
0A
⎯
3D4H
000F FFD4H
Operand break
11
0B
⎯
3D0H
000F FFD0H
Step trace trap
12
0C
⎯
3CCH
000F FFCCH
System reserved
13
0D
⎯
3C8H
000F FFC8H
Undefined instruction exception
14
0E
⎯
3C4H
000F FFC4H
⎯
15
0F
15 (FH) fixed
3C0H
000F FFC0H
External interrupt request ch.0 to ch.7
16
10
ICR00
3BCH
000F FFBCH
External interrupt request ch.8 to ch.15
17
11
ICR01
3B8H
000F FFB8H
Reserved
18
12
ICR02
3B4H
000F FFB4H
Reserved
19
13
ICR03
3B0H
000F FFB0H
16-bit reload timer ch.0 to ch.2
20
14
ICR04
3ACH
000F FFACH
Reception interrupt request of UART/CSIO
ch.0
21
15
ICR05
3A8H
000F FFA8H
Transmission interrupt request of UART/CSIO
ch.0
Transmission bus idle interrupt request of
UART/CSIO ch.0
22
16
ICR06
3A4H
000F FFA4H
Reception interrupt request of UART/CSIO/
I2C ch.1
23
17
ICR07
3A0H
000F FFA0H
Transmission interrupt request of UART/
CSIO/ I2C ch.1
Transmission bus idle interrupt request of
UART/CSIO ch.1
24
18
ICR08
39CH
000F FF9CH
Status interrupt request of I2C ch.1
25
19
ICR09
398H
000F FF98H
(Continued)
DS07-16907-3E
53
MB91610 Series
Interrupt
number
Interrupt source (Peripheral resource)
Interrupt
level setting
register
Offset
Address of
TBR default
Decimal
Hexadecimal
Reception interrupt request of UART/CSIO/I2C
ch.2
26
1A
ICR10
394H
000F FF94H
Transmission interrupt request of UART/CSIO/I2C
ch.2
Transmission bus idle interrupt request of UART/
CSIO ch.2
27
1B
ICR11
390H
000F FF90H
Status interrupt request of I2C ch.2
28
1C
ICR12
38CH
000F FF8CH
Reception interrupt request of UART/CSIO/I2C
ch.3
29
1D
ICR13
388H
000F FF88H
Transmission interrupt request of UART/CSIO/I2C
ch.3
Transmission bus idle interrupt request of UART/
CSIO ch.3
Status interrupt request of I2C ch.3
30
1E
ICR14
384H
000F FF84H
Reserved
31
1F
ICR15
380H
000F FF80H
Reserved
32
20
ICR16
37CH
000F FF7CH
Reserved
33
21
ICR17
378H
000F FF78H
Reserved
34
22
ICR18
374H
000F FF74H
Reserved
35
23
ICR19
370H
000F FF70H
Reserved
36
24
ICR20
36CH
000F FF6CH
Reserved
37
25
ICR21
368H
000F FF68H
38
26
ICR22
364H
000F FF64H
Reception interrupt request of UART/CSIO/I C
ch.8 to ch.11
Transmission interrupt request of UART/CSIO/I2C
ch.8 to ch.11
Transmission bus idle interrupt request of UART/
CSIO ch.8 to ch.11
Transmission FIFO interrupt request UART/CSIO/
I2C ch.8 to ch.11
Status interrupt request of I2C ch.8 to ch.11
39
27
ICR23
360H
000F FF60H
HDMI-CEC/Remote control reception
40
28
ICR24
35CH
000F FF5CH
Main timer/Sub timer/Watch counter
41
29
ICR25
358H
000F FF58H
10-bit A/D converter
• Scan conversion interrupt request
• Priority conversion interrupt request
• FIFO overrun interrupt request
• Conversion result compare interrupt request
42
2A
ICR26
354H
000F FF54H
Reserved
2
(Continued)
54
DS07-16907-3E
MB91610 Series
(Continued)
Interrupt
number
Interrupt source (Peripheral resource)
Interrupt
level setting
register
Offset
Address of
TBR default
Decimal
Hexadecimal
32-bit free run timer ch.0
43
2B
ICR27
350H
000F FF50H
32-bit input capture ch.0 to ch.3
44
2C
ICR28
34CH
000F FF4CH
32-bit output compare ch.0 to ch.3
45
2D
ICR29
348H
000F FF48H
Base timer ch.0
46
2E
ICR30
344H
000F FF44H
Base timer ch.1
47
2F
ICR31
340H
000F FF40H
Base timer ch.2
48
30
ICR32
33CH
000F FF3CH
Base timer ch.3
49
31
ICR33
338H
000F FF38H
Base timer ch.4, ch.5
50
32
ICR34
334H
000F FF34H
Base timer ch.6, ch.7
51
33
ICR35
330H
000F FF30H
Reserved
52
34
ICR36
32CH
000F FF2CH
OSDC (MAIN)
53
35
ICR37
328H
000F FF28H
USB function (DRQ of End Point 1 to 5)
54
36
ICR38
324H
000F FF24H
USB function (DRQI of End Point 0,
DRQO and each status/ USB HOST (each status)
55
37
ICR39
320H
000F FF20H
OSDC (SUB)
56
38
ICR40
31CH
000F FF1CH
DMA controller (DMAC) ch.0
57
39
ICR41
318H
000F FF18H
DMA controller (DMAC) ch.1
58
3A
ICR42
314H
000F FF14H
DMA controller (DMAC) ch.2
59
3B
ICR43
310H
000F FF10H
DMA controller (DMAC) ch.3
60
3C
ICR44
30CH
000F FF0CH
DMA controller (DMAC) ch.4 to ch.7
61
3D
ICR45
308H
000F FF08H
System reserved
62
3E
ICR46
304H
000F FF04H
Delay interrupt
63
3F
ICR47
300H
000F FF00H
System reserved (Used by REALOS)
64
40
⎯
2FCH
000F FEFCH
System reserved (Used by REALOS)
65
41
⎯
2F8H
000F FEF8H
Used by INT instruction
66
to
255
42
to
FF
⎯
2F4H
to
000H
000F FEF4H
to
000F FC00H
DS07-16907-3E
55
MB91610 Series
* : USB interrupt source
Interrupt Number
Decimal
Hexadecimal
54
36
55
56
37
USB interrupt source
Details
USB function
(DRQ of End Point 1 to 5)
DRQ (End Point1 to 5)
USB function
(DRQI, DRQO of End Point 0 and each
status)
DRQI, DRQO, SPK, SUSP, SOF,
BRST, CONF, WKUP
USB HOST (Each status)
DIRQ, URIRQ, RWKIRQ,
CNNIRQ, SOFIRQ, CMPIRQ
DS07-16907-3E
MB91610 Series
■ PIN STATUS IN EACH CPU STATE
• When INIT = “L”
This is the period when the INIT pin is the “L” level.
• When INIT = “H”
The status immediately after the INIT pin changes from the “L” level to the “H” level.
• SLVL1
This bit is a standby level setting bit in the standby mode control register (STBCR) .
• Input enabled
Indicates that the input function can be used.
• Input disabled
Indicates that the input function cannot be used.
• Output Hi-Z
Indicates that the output drive transistor is disabled and the pin is put in the Hi-Z state.
• Maintain previous state
Maintains the state that was being output immediately prior to entering the current mode.
If a built-in peripheral function is operating, the output follows the peripheral function.
If the pin is being used as a port, that output is maintained.
• Internal input fixed at “0”
The input gate connected to the pin is disconnected from the external input and internally connected to “0”.
• Input enabled when interrupt function selected and enabled
Inputs are allowed only when the pin is configured as an external interrupt request input pin and the external
interrupt request is enabled.
DS07-16907-3E
57
MB91610 Series
• List of pin status
Pin name
Function
INIT
During initialization
INIT = “L”
INIT = “H”
INIT
⎯
X0
X0
X1
Sleep
Mode
Standby Mode
SLVL1 = 0
SLVL1 = 1
⎯
Input
enabled
Input
enabled
Input
enabled
Input
enabled
Hi-Z/
Input
enabled
Hi-Z/
Input
enabled
X1
Input
enabled
Input
enabled
"H" output/
Input
enabled
"H" output/
Input
enabled
X0A
X0A
(When INIT input, see PK1.
When port selected, input
disabled)
Input
disabled
Input
disabled
Hi-Z/
Input
enabled
Hi-Z/
Input
enabled
X1A
X1A
(When INIT input, see PK0.
When port selected, input
disabled)
Input
disabled
Input
disabled
"H" output/
Input
enabled
"H" output/
Input
enabled
MD0
MD0
Input
enabled
Input
enabled
MD1
MD1
Input
enabled
Input
enabled
Input
enabled
Input
enabled
P00
P00/TIOA0/SOUT0_1/IN0
P01
P01/TIOB0/SIN0_1/IN1
P02
P02/TIOA1/SCK0_1/IN2
P03
P03/TIOB1/IN3
P04
P04/TIOA2/SOUT1
Output Hi-Z
Output Hi-Z
Input
enabled
Maintain
previous
state
P05
P05/TIOB2/SIN1
Output Hi-Z/
Internal input fixed at
"0"
P06
P06/TIOA3/SCK1
P07
P07/TIOB3
P10
P10/TIOA4/SOUT2/INT0
P11
P11/TIOB4/SIN2/INT1
P12
P12/TIOA5/SCK2/INT2
P13
P13/TIOB5/INT3
P14
P14/TIOA6/SOUT3/INT4
P15
P15/TIOB6/SIN3/INT5
P16
P16/TIOA7/SCK3/INT6
P17
P17/TIOB7/INT7
Input
enabled
Maintain
previous
state
Output Hi-Z/
Internal
input fixed at
"0"
Output Hi-Z
Output Hi-Z
Input
enabled
Maintain
previous
state
Maintain
previous
state
Input
enabled
when
interrupt
function
selected and
enabled
(Continued)
58
DS07-16907-3E
MB91610 Series
Pin name
Function
P20
P20/SOUT8
P21
P21/SIN8
P22
P22/SCK8
P23
P23/RCIN_1
P24
P24/SOUT9/OUT0
P25
P25/SIN9/OUT1
P26
P26/SCK9/OUT2
P27
P27/OUT3
P30
P30/SOUT10/INT8
P31
P31/SIN10/INT9
P32
P32/SCK10/INT10
P33
P33/INT11
P34
P34/SOUT11/INT12
P35
P35/SIN11/INT13
P36
P36/SCK11/INT14
P37
P37/INT15
P50
P50
P51
P51
P52
P52
P53
P53
P54
P54/RCIN
P55
P55/ADTRG
P56
P56/FRCK
P57
P57
P70
P70/AN0/OUT0_1
P71
P71/AN1/OUT1_1
P72
P72/AN2/TMO0/OUT2_1
P73
P73/AN3/TMO1/OUT3_1
P74
P74/AN4/TMO2
P75
P75/AN5/SOUT0/TMI0
P76
P76/AN6/SIN0/TMI1
P77
P77/AN7/SCK0/TMI2
PK0
PK0
PK1
PK1
During initialization
INIT = “L”
INIT = “H”
Output Hi-Z
Output Hi-Z
Input enabled
Sleep Mode
Maintain
previous
state
Standby Mode
SLVL1 = 0
SLVL1 = 1
Output Hi-Z/
Maintain preInternal input
vious state
fixed at "0"
Output Hi-Z/
Internal input
fixed at "0"
Output Hi-Z
Output Hi-Z
Input
enabled
Maintain
previous
state
Maintain
previous
state
Output Hi-Z
Output Hi-Z
Input
enabled
Maintain
previous
state
Maintain
previous
state
Output Hi-Z/
Internal input
fixed at "0"
Output Hi-Z
Output Hi-Z
Input
enabled*
Maintain
previous
state
Maintain
previous
state
Output Hi-Z/
Internal input
fixed at "0"
Output Hi-Z
Output Hi-Z
Input
enabled
Maintain
previous
state
Maintain
previous
state
Output Hi-Z/
Internal input
fixed at "0"
Input enabled
when
interrupt
function
selected and
enabled
* : Analog input has a priority (digital input is disconnected)
(Continued)
DS07-16907-3E
59
MB91610 Series
(Continued)
Pin name
Function
UDP
UDP(USB)
During initialization
INIT = “L”
INIT = “H”
Output Hi-Z
Output Hi-Z
Input
enabled
Sleep Mode
SLVL1 = 0
SLVL1 = 1
Maintain previous state/
Input
enabled
Maintain
previous
state
Output Hi-Z/
Internal input
fixed at "0"
Input state
Input state
UDM
UDM(USB)
DCKI
DCKI
Input state
Input
enabled
Input
enabled
DCKO
DCKO
L output
L output/
DCK output
L output/
DCK output
VSYNC
VSYNC
HSYNC
HSYNC
Input state
Input
enabled
Input
enabled
R4 to R0
R4 to R0
L output/
R output
L output/
R output
G5 to G0
G5 to G0
L output/
G output
L output/
G output
B4 to B0
B4 to B0
L output/
B output
L output/
B output
VOA2
to
VOA0
VOA2 to VOA0
L output/
VOA output
L output/
VOA output
VOB
VOB
L output/
VOB output
L output/
VOB output
ROUT
ROUT
L output/
L output/
ROUT output ROUT output
GOUT
GOUT
L output/
L output/
GOUT output GOUT output
BOUT
BOUT
L output/
L output/
BOUT output BOUT output
HWDE
HWDE
60
L output
Input state
Input
enabled
Standby Mode
Input
enabled
L output
L output
(OSDC stop) (OSDC stop)
Input state
Input state
L output
L output
(OSDC stop) (OSDC stop)
Input state
Input state
DS07-16907-3E
MB91610 Series
• List of pin status (serial write mode)
Pin name
Function
During
initialization
During
asynchronous
write operation
INIT = “L”
During
synchronous
write operation
INIT = “H”
INIT
INIT
⎯
⎯
⎯
X0
X0
Input enabled
Input enabled
Input enabled
X1
X1
Input enabled
Input enabled
Input enabled
X0A
X0A
(When INIT input, see PK1.
When port selected, input disabled)
Input disabled
Input disabled
Input disabled
X1A
X1A
(When INIT input, see PK0.
When port selected, input disabled)
Input disabled
Input disabled
Input disabled
MD0
MD0
Input enabled
Input enabled
Input enabled
MD1
MD1
Input enabled
Input enabled
Input enabled
P00
P00/TIOA0/SOUT0_1/IN0
P01
P01/TIOB0/SIN0_1/IN1
P02
P02/TIOA1/SCK0_1/IN2
P03
P03/TIOB1/IN3
P04
P04/TIOA2/SOUT1
Output Hi-Z
Output Hi-Z
Input enabled
Output Hi-Z
Input enabled
P05
P05/TIOB2/SIN1
P06
P06/TIOA3/SCK1
P07
P07/TIOB3
P10
P10/TIOA4/SOUT2/INT0
P11
P11/TIOB4/SIN2/INT1
P12
P12/TIOA5/SCK2/INT2
P13
P13/TIOB5/INT3
P14
P14/TIOA6/SOUT3/INT4
Output Hi-Z
Output Hi-Z
Input enabled
Output Hi-Z
Input enabled
P15
P15/TIOB6/SIN3/INT5
P16
P16/TIOA7/SCK3/INT6
P17
P17/TIOB7/INT7
P20
P20/SOUT8
P21
P21/SIN8
P22
P22/SCK8
P23
P23/RCIN_1
P24
P24/SOUT9/OUT0
Output Hi-Z
Output Hi-Z
Input enabled
Output Hi-Z
Input enabled
P25
P25/SIN9/OUT1
P26
P26/SCK9/OUT2
P27
P27/OUT3
(Continued)
DS07-16907-3E
61
MB91610 Series
Pin name
Function
During
initialization
During
asynchronous
write operation
INIT = “L”
P30
P30/SOUT10/INT8
P31
P31/SIN10/INT9
P32
P32/SCK10/INT10
P33
P33/INT11
P34
P34/SOUT11/INT12
P35
P35/SIN11/INT13
P36
P36/SCK11/INT14
P37
P37/INT15
P50
P50
P51
P51
P52
P52
P53
P53
P54
P54/RCIN
P55
P55/ADTRG
P56
P56/FRCK
P57
P57
P70
P70/AN0/OUT0_1
P71
P71/AN1/OUT1_1
P72
P72/AN2/TMO0/OUT2_1
P73
P73/AN3/TMO1/OUT3_1
P74
P74/AN4/TMO2
P75
During
synchronous
write operation
INIT = “H”
Output Hi-Z
Output Hi-Z
Input enabled
Output Hi-Z
Input enabled
Output Hi-Z
Output Hi-Z
Input enabled
Output Hi-Z
Input enabled
Output Hi-Z
Input enabled
Output Hi-Z
Input enabled
P75/AN5/SOUT0/TMI0
Output
Output
P76
P76/AN6/SIN0/TMI1
P77
P77/AN7/SCK0/TMI2
Output Hi-Z
Input enabled
Output Hi-Z
Input enabled
PK0
PK0
PK1
PK1
Output Hi-Z
Output Hi-Z
Input enabled
Output Hi-Z
Input enabled
UDP
UDP (USB)
UDM
UDM (USB)
Output Hi-Z
Output Hi-Z
Input enabled
Output Hi-Z
Input enabled
DCKI
DCKI
Input state
Input enabled
Input enabled
DCKO
DCKO
L output
L output
L output
VSYNC
VSYNC
HSYNC
HSYNC
Input state
Input enabled
Input enabled
Output Hi-Z
(Continued)
62
DS07-16907-3E
MB91610 Series
(Continued)
Pin name
Function
During
initialization
During
asynchronous
write operation
INIT = “L”
R4 to R0
R4 to R0
G5 to G0
G5 to G0
B4 to B0
B4 to B0
VOA2 to
VOA0
VOA2 to VOA0
VOB
VOB
ROUT
ROUT
GOUT
GOUT
BOUT
BOUT
HWDE
HWDE
DS07-16907-3E
During
synchronous
write operation
INIT = “H”
L output
L output
L output
L output
L output
L output
Input state
Input enabled
Input enabled
63
MB91610 Series
■ ELECTRICAL CHARACTERISTICS
1. Absolute Maximum Ratings
Parameter
Symbol
Power supply voltage*1, *2
1
Analog power supply voltage* , *
3
Analog reference voltage*1, *3
1
Analog pin input voltage*
1
Output voltage*1
Maximum clamp current
Total maximum clamp current
“L” level maximum output current*4
Unit
Max
VCC
Vss − 0.3
Vss + 4.0
V
AVCC
Vss − 0.3
Vss + 4.0
V
AVRH
Vss − 0.3
Vss + 4.0
V
Vss − 0.3
Vcc + 0.3
( ≤ 4.0)
V
*7
Vss − 0.3
Vss + 6.0
V
5 V tolerant
Vss − 0.5
VCC + 0.5 ( ≤ 4.0)
V
USB I/O
Vss − 0.3
Vss + 4.0
V
Vss − 0.3
Vcc + 0.3
V
Vss − 0.5
VCC + 0.5 ( ≤ 4.0)
V
ICLAMP
−4
+4
mA
*8
Σ|ICLAMP|
⎯
40
mA
*8
⎯
10
mA
⎯
43
mA
⎯
4
mA
⎯
15
mA
VIA
VO
IOL
“L” level average output current*5
IOLAV
“L” level total maximum
output current
ΣIOL
⎯
100
mA
ΣIOLAV
⎯
50
mA
⎯
− 10
mA
⎯
− 43
mA
⎯
−4
mA
⎯
− 15
mA
“L” level total average output current*6
“H” level maximum output current*4
IOH
“H” level average output current*5
IOHAV
“H” level total maximum output
current*6
ΣIOH
⎯
− 100
mA
ΣIOHAV
⎯
− 50
mA
⎯
850
mW
⎯
600
mW
Ta
− 40
+ 85
°C
TSTG
− 55
+ 125
°C
“H” level total average output current
Power consumption (Flash product)
Power consumption (MASK product)
Operating temperature
Storage temperature
Remarks
Min
VI
Input voltage*
Rating
PD
USB I/O
USB I/O
USB I/O
USB I/O
USB I/O
*1 : The parameter is based on VSS = AVSS = 0.0 V.
*2 : VCC must not drop below VSS − 0.3 V.
*3 : Be careful not to exceed VCC + 0.3 V, for example, when the power is turned on.
*4 : The maximum output current is the peak value for a single pin.
*5 : The average output is the average current for a single pin over a period of 100 ms.
(Continued)
64
DS07-16907-3E
MB91610 Series
(Continued)
*6 : The total average output current is the average current for all pins over a period of 100 ms.
*7 : If the input current or the maximum input current are limited by some means with external components, the
ICLAMP rating supersedes the VI rating.
*8 : • Corresponding pins:P14 to P17,P20 to P27,P30 to P37,P50 to P57
• Use within recommended operating conditions.
• Use at DC voltage (current).
• The +B signal should always be applied by connecting a limiting resistor between the +B signal and the
microcontroller.
• The value of the limiting resistor should be set so that the current input to the microcontroller pin does not
exceed rated values at any time regardless of instantaneously or constantly when the +B signal is input.
• Note that when the microcontroller drive current is low, such as in the low power consumption modes, the
+B input potential can increase the potential at the VCC pin via a protective diode, possibly affecting other
devices.
• Note that if the +B signal is input when the microcontroller is off (not fixed at 0V), since the power is supplied
through the pin, the microcontroller may operate incompletely.
• Do not leave +B input pins open.
• Sample recommended circuit
•Input/output equivalent circuit
Protective diode
Vcc
Limiting ICLAMP
resistor
+B input (0 V to 16 V)
P-ch
N-ch
R
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
DS07-16907-3E
65
MB91610 Series
2. Recommended Operating Conditions
(VSS = AVSS = 0.0 V)
Parameter
Symbol
Value
Unit
Min
Typ
Max
VCC
3.0
⎯
3.6
V
Analog power supply voltage
AVCC
3.0
⎯
3.6
V
Analog reference voltage
AVRH
AVSS
⎯
AVCC
V
Smoothing capacitor
Cs
⎯
4.7
⎯
μF
Operating temperature
Ta
− 40
⎯
+ 85
°C
Power supply voltage
Remarks
AVCC ≤ VCC
• C Pin Connection Diagram
C
This series
CS
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
representatives beforehand.
66
DS07-16907-3E
MB91610 Series
3. DC Characteristics
(1) DC Characteristics
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Symbol
Pin name
Conditions
Value
Min
⎯
Typ
45
Max
Normal
operation
Power supply
current
(Flash product)
⎯
55
100
60
75
OSDC stopped Using USB
mA
CPU : 32 MHz,
Peripheral : 32 MHz
130
Dot clock 50 MHz
(PLL)
Dot clock PLL is
used
Analog RGB DAC is
mA
used
Digital RGB is not
used
CPU : 33 MHz,
Peripheral : 33 MHz
ICCO
⎯
105
150
Dot clock 75 MHz
(PLL)
Dot clock PLL is
used
mA Analog RGB DAC is
not used
Digital RGB is used
CPU : 33 MHz,
Peripheral:33 MHz
⎯
15
25
OSDC stopped
mA Not using USB
Peripheral : 33 MHz
⎯
25
40
OSDC stopped UsmA ing USB
Peripheral : 32 MHz
VCC
ICCS
Remarks
OSDC stopped
Not using USB
mA
CPU : 33 MHz,
Peripheral : 33 MHz
ICC
⎯
Unit
SLEEP
mode
ICCL
Sub
operation*
⎯
150
550
μA
ICCT
Watch mode*
⎯
120
450
μA
ICCH
STOP mode*
⎯
65
320
μA
CPU : 32 kHz
Peripheral : 32 kHz
* : Ta = + 25 °C and VCC = 3.3 V
(Continued)
DS07-16907-3E
67
MB91610 Series
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Symbol
Pin name
Conditions
Value
Min
⎯
Typ
35
Max
Normal
operation
Power supply
current
(MASK product)
⎯
50
80
45
60
OSDC stopped Using USB
mA
CPU : 32 MHz,
Peripheral : 32 MHz
100
Dot clock 50 MHz
(PLL)
Dot clock PLL is
used
Analog RGB DAC is
mA
used
Digital RGB is not
used
CPU : 33 MHz,
Peripheral : 33 MHz
ICCO
⎯
80
110
Dot clock 75 MHz
(PLL)
Dot clock PLL is
used
mA Analog RGB DAC is
not used
Digital RGB is used
CPU : 33 MHz,
Peripheral:33 MHz
⎯
15
25
OSDC stopped
mA Not using USB
Peripheral : 33 MHz
⎯
25
40
OSDC stopped UsmA ing USB
Peripheral : 32 MHz
VCC
ICCS
Remarks
OSDC stopped
Not using USB
mA
CPU : 33 MHz,
Peripheral : 33 MHz
ICC
⎯
Unit
SLEEP
mode
ICCL
Sub
operation*
⎯
150
550
μA
ICCT
Watch mode*
⎯
120
450
μA
ICCH
STOP mode*
⎯
65
320
μA
CPU : 32 kHz
Peripheral : 32 kHz
* : Ta = + 25 °C and VCC = 3.3 V
(Continued)
68
DS07-16907-3E
MB91610 Series
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
“H” level input
voltage
(hysteresis input)
“L”level input
voltage
(hysteresis input)
Symbol
VIHS
VILS
“H” level
output voltage
VOH
“L” level
output voltage
VOL
Pin name
Conditions
P00 to P07,
P10 to P17,
P50 to P57,
P70 to P77,
PK0, PK1,
DCKI,
VSYNC,
HSYNC, INIT,
MD0, MD1
Value
Unit
Typ
Max
⎯
VCC × 0.8
⎯
VCC + 0.3
V
P20 to P27,
P30 to P37
⎯
VCC × 0.8
⎯
VSS + 5.5
V
P00 to P07,
P10 to P17,
P20 to P27,
P30 to P37,
P50 to P57,
P70 to P77,
PK0, PK1,
DCKI,
VSYNC,
HSYNC, INIT,
MD0, MD1
⎯
Vss − 0.3
⎯
VCC × 0.2
V
VCC = 3.0 V
VCC − 0.5
IOH = − 4 mA
⎯
VCC
V
VSS
⎯
0.4
V
−5
⎯
+5
μA
Digital pin
− 10
⎯
+ 10
μA
Analog pin
P00 to P07,
P10 to P17,
P20 to P27,
P30 to P37,
P50 to P57,
P70 to P77,
PK0, PK1,
R0 to R4,
G0 to G5,
B0 to B4,
VOA0 to
VOA2,
VOB, DCKO
VCC = 3.0 V
IOL = 4 mA
Input leak current
IIL
⎯
⎯
Pull-up resistance
value
RPU
Pull-up pin
⎯
16.6
33
66
kΩ
Pull-down
resistance value
RPD
IBREAK,
ICD0 to ICD3
⎯
16.6
33
66
kΩ
CIN
Other than
VCC, VSS,
AVCC, AVSS,
AVRH
⎯
⎯
10
15
pF
Input capacitance
Remarks
Min
5 V tolerant
MB91F610A
only
(Continued)
DS07-16907-3E
69
MB91610 Series
(Continued)
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Symbol
Pin name
Conditions
Analog RGB
reference voltage
VREF
VREF
Analog RGB
reference
resistance
RREF
Analog RGB
external load
resistance
RL
Parameter
70
Value
Unit
Min
Typ
Max
⎯
1.05
1.10
1.15
V
VRO-VSSD
⎯
2.4
2.7
⎯
kΩ
ROUT,
GOUT, BOUT
⎯
⎯
150
160
Ω
Remarks
DS07-16907-3E
MB91610 Series
4. AC Characteristics
(1) Main Clock (MCLK) Input Standard
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Input frequency
Input clock cycle
Symbol
Pin
name
Conditions
Value
Unit
Remarks
48
MHz
When crystal oscillator is connected
4
48
MHz
When using external
clock
⎯
20.83
250
ns
When using external
clock
Min
Max
⎯
4
⎯
FCH
tCYLH
X0, X1
Input clock pulse width
⎯
PWH/tCYLH
PWL/tCYLH
45
55
%
When using external
clock
Input clock rise time
and fall time
tCF
tCR
⎯
⎯
5
ns
When using external
clock
Internal operating
clock frequency
Internal operating
clock cycle time
DS07-16907-3E
FCS
⎯
⎯
⎯
33
MHz Source clock
FCC
⎯
⎯
⎯
33
MHz CPU clock
FCP
⎯
⎯
⎯
33
MHz Peripheral bus clock
tCYCS
⎯
⎯
30
⎯
ns
Source clock
tCYCC
⎯
⎯
30
⎯
ns
CPU clock
tCYCP
⎯
⎯
30
⎯
ns
Peripheral bus clock
71
MB91610 Series
• Operating guaranteed range (Not using USB)
Power supply voltage
Vcc (V)
• When the main clock is selected (DIVB=000)
3.6
3.3
3.0
2.7
2.4
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
Internal operation clock Fcc (MHz)
Power supply voltage
Vcc (V)
• When the PLL clock is selected (DIVB=000)
3.6
3.3
3.0
2.7
2.4
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
Internal operation clock Fcc (MHz)
Power supply voltage
Vcc (V)
• When the sub clock is selected
3.6
3.3
3.0
2.7
2.4
0
4
8
12
16
20
24
28
32
Internal operation clock Fcc (kHz)
72
DS07-16907-3E
MB91610 Series
• Operating guaranteed range (at using USB)
• When the main clock is selected (DIVB=000*1)
Power supply voltage
Vcc (V)
3.6
3.3
3.0
2.7
2.4
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
Internal operation clock Fcc (MHz)
• When the PLL clock is selected (DIVB=000*1, ODS=10*3, PMS=0111*4, PDS=0000*2, X0=4 MHz
or DIVB=000*1, ODS=10*3, PMS=0001*4, PDS=0010*2, X0=48 MHz)
Power supply voltage
Vcc (V)
3.6
3.3
3.0
2.7
2.4
0
4
8
12
16
20
24
28
32
Internal operation clock Fcc (MHz)
*1 : The values other than DIVB = 000 are omitted.
*2 : The values other than PDS = 0000, 0001,0010 are omitted.
*3 : The values other than ODS = 10 are omitted.
*4 : The values other than PMS = 0001,0111 are omitted.
Note: DIVB
ODS
PDS
PMS
: Base clock division configuration bit
: PLL macro oscillation clock division rate select bit
: PLL input clock division select bit
: PLL clock multiple rate select bit
DS07-16907-3E
73
MB91610 Series
(2) Sub Clock (SBCLK) Input Standard
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Symbol
Input frequency
Pin name Conditions
Value
Unit
Remarks
⎯
kHz
When crystal oscillator
is connected
32.768
⎯
kHz
When using external
clock
⎯
30.518
⎯
μs
When using external
clock
Min
Typ
Max
⎯
⎯
32.768
⎯
⎯
⎯
FCL
X0A,
X1A
Input clock cycle
tCYLL
Input clock pulse
width
⎯
PWH / tCYLL
PWL / tCYLL
45
⎯
55
%
When using external
clock
Input clock rise
time and fall time
tCF,
tCR
⎯
⎯
⎯
200
ns
When using external
clock
<When external clock input>
tCYLH, tCYLL
X0
X0A
0.8 × VCC
0.8 × VCC
0.2 × VCC
PWH
0.2 × VCC
PWL
tCF
74
0.8 × VCC
tCR
DS07-16907-3E
MB91610 Series
(3) Conditions of PLL
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Value
Symbol
Min
Typ
Max
Unit
Remarks
Time from when the PLL
starts operating until the
oscillation stabilizes
PLL oscillation stabilization wait time
(LOCK UP time)
tLOCK
600
⎯
⎯
μs
PLL oscillation stabilization wait time
for OSDC (LOCK UP time)
tL
10
⎯
⎯
ms
PLL input clock frequency
fPLLI
4
⎯
24
MHz
PLL multiple rate
⎯
4
⎯
24
fPLLO
96
⎯
100
PLL macro oscillation clock frequency
multiplied
ODS × PMS
by
MHz
(4) Regulator Voltage Stabilization Wait Time
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Value
Symbol
Regulator voltage
stabilization wait time
tREG
Min
Max
50
⎯
Unit
Remarks
μs
Time taken for the regulator
voltage to stabilize
Note : This is the time from when the external power supply stabilizes (after reaching 3.0 V).
(5) Reset Input Standards
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Reset input time
(At power-on, main oscillation
stop mode)
Symbol
INIT
Value
Conditions
tINITX
Reset input time (At other times)
Reset input rise time and fall time
Pin
name
Unit
Min
Max
Oscillation time of
oscillator + 10 tCYLH
⎯
ns
10 tCYLH
⎯
ns
⎯
10
ms
⎯
tINITXF
tINITXR
Remarks
*
* : After the supply voltage has stabilized, it takes a further 50 μs until the internal supply stabilizes. Hold the input
to the INIT pin during that period.
• At power-on
• When in stop mode
• When in sub mode and sub watch mode when the main oscillation is stopped.
tINITX
VIHS
VIHS
INIT
VILS
tINITXF
DS07-16907-3E
VILS
tINITXR
75
MB91610 Series
(6) Base Timer Input Timing
• Timer input timing
Parameter
Input pulse width
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Pin name
Conditions
Min
Max
tTIWH,
tTIWL
TIOAn/TIOBn
(When used as ECK, TIN)
⎯
2 tCYCP
⎯
tTIWH
ECK
VIHS
Input pulse width
Value
Symbol
Pin name
Conditions
Min
Max
tTRGH,
tTRGL
TIOAn/TIOBn
(When used as TGIN)
⎯
2 tCYCP
⎯
VIHS
76
VILS
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
tTRGH
TGIN
ns
VIHS
VILS
• Trigger Input Timing
Unit
tTIWL
TIN
Parameter
Value
Symbol
Unit
ns
tTRGL
VIHS
VILS
VILS
DS07-16907-3E
MB91610 Series
(7) Synchronous serial (CSIO) timing
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
• Synchronous serial (SPI = 0, SCINV = 0)
Value
Parameter
Symbol
Pin name
Conditions
Unit
Min
Max
Serial clock cycle time
tSCYC
SCKn
4tCYCP
⎯
ns
SCK ↓ → SOUT delay time
tSLOVI
SCKn,
SOUTn
− 30
+ 30
ns
SIN → SCK ↑ setup time
tIVSHI
SCKn,
SINn
57
⎯
ns
SCK ↑ → SIN hold time
tSHIXI
SCKn,
SINn
0
⎯
ns
Serial clock “L” pulse width
tSLSH
SCKn
2tCYCP − 10
⎯
ns
Serial clock “H” pulse width
tSHSL
SCKn
tCYCP + 10
⎯
ns
SCK ↓ → SOUT delay time
tSLOVE
SCKn,
SOUTn
⎯
48
ns
SIN → SCK ↑ setup time
tIVSHE
SCKn,
SINn
25
⎯
ns
SCK ↑ → SIN hold time
tSHIXE
SCKn,
SINn
20
⎯
ns
SCK fall time
tF
SCKn
⎯
5
ns
SCK rise time
tR
SCKn
⎯
5
ns
Internal shift clock
operation
External shift clock
operation
Notes: • The above standards apply to CLK synchronous mode.
• tCYCP indicates the peripheral clock cycle time.
• When the external load capacitance C = 50 pF.
tSCYC
VOH
SCK
VOL
VOL
tSLOVI
VOH
SOUT
VOL
tIVSHI
tSHIXI
VIHS
VIHS
VILS
VILS
SIN
MS bit = 0
DS07-16907-3E
77
MB91610 Series
tSLSH
tSHSL
VIHS
SCK
tF
VIHS
VILS
VILS
VIHS
tR
tSLOVE
VOH
SOUT
VOL
tIVSHE
tSHIXE
VIHS
VIHS
VILS
VILS
SIN
MS bit = 1
• Synchronous serial (SPI = 0, SCINV = 1)
Parameter
Symbol
Pin name
Serial clock cycle time
tSCYC
SCK ↑→ SOUT delay time
Conditions
Value
Unit
Min
Max
SCKn
4tCYCP
⎯
ns
tSHOVI
SCKn,
SOUTn
− 30
+ 30
ns
SIN → SCK ↓ setup time
tIVSLI
SCKn,
SINn
57
⎯
ns
SCK ↓ → SIN hold time
tSLIXI
SCKn,
SINn
0
⎯
ns
Serial clock “L” pulse width
tSLSH
SCKn
2tCYCP − 10
⎯
ns
Serial clock “H” pulse width
tSHSL
SCKn
tCYCP + 10
⎯
ns
SCK ↑ → SOUT delay time
tSHOVE
SCKn,
SOUTn
⎯
48
ns
SIN → SCK ↓ setup time
tIVSLE
SCKn,
SINn
25
⎯
ns
SCK ↓ → SIN hold time
tSLIXE
SCKn,
SINn
20
⎯
ns
SCK fall time
tF
SCKn
⎯
5
ns
SCK rise time
tR
SCKn
⎯
5
ns
Internal shift clock
operation
External shift clock
operation
Notes: • The above standards apply to CLK synchronous mode.
• tCYCP indicates the peripheral clock cycle time.
• When the external load capacitance C = 50 pF.
78
DS07-16907-3E
MB91610 Series
tSCYC
VOH
VOH
VOL
SCK
tSHOVI
VOH
SOUT
VOL
tIVSLI
SIN
tSLIXI
VIHS
VIHS
VILS
VILS
MS bit = 0
tSHSL
VIHS
SCK
tSLSH
VIHS
VILS
VILS
VILS
tF
tR
tSHOVE
VOH
SOUT
VOL
tIVSLE
SIN
tSLIXE
VIHS
VIHS
VILS
VILS
MS bit = 1
DS07-16907-3E
79
MB91610 Series
• Synchronous serial (SPI = 1,SCINV = 0)
Parameter
Symbol
Pin name
Serial clock cycle time
tSCYC
SCK ↑→ SOUT delay time
Value
Conditions
Unit
Min
Max
SCKn
4tCYCP
⎯
ns
tSHOVI
SCKn,
SOUTn
− 30
+ 30
ns
SIN → SCK ↓ setup time
tIVSLI
SCKn,
SINn
57
⎯
ns
SCK ↓ → SIN hold time
tSLIXI
SCKn,
SINn
0
⎯
ns
SOUT → SCK ↓ delay time
tSOVLI
SCKn,
SOUTn
2tCYCP − 30
⎯
ns
Serial clock “L” pulse width
tSLSH
SCKn
2tCYCP − 10
⎯
ns
Serial clock “H” pulse width
tSHSL
SCKn
tCYCP + 10
⎯
ns
SCK ↑ → SOUT delay time
tSHOVE
SCKn,
SOUTn
⎯
48
ns
SIN → SCK ↓ setup time
tIVSLE
SCKn,
SINn
25
⎯
ns
SCK ↓ → SIN hold time
tSLIXE
SCKn,
SINn
20
⎯
ns
SCK fall time
tF
SCKn
⎯
5
ns
SCK rise time
tR
SCKn
⎯
5
ns
Internal shift clock
operation
External shift clock
operation
Notes: • The above standards apply to CLK synchronous mode.
• tCYCP indicates the peripheral clock cycle time.
• When the external load capacitance C = 50 pF.
tSCYC
VOH
SCK
VOL
tSHOVI
VOL
tSOVLI
SOUT
VOH
VOL
VOH
VOL
tIVSLI
SIN
tSLIXI
VIHS
VILS
VIHS
VILS
MS bit = 0
80
DS07-16907-3E
MB91610 Series
tSHSL
tSLSH
VIHS
SCK
VILS
tSHOVE
tR
VOH
VOL
VOH
VOL
tIVSLE
SIN
VIHS
VILS
tF
*
SOUT
VIHS
VILS
tSLIXE
VIHS
VILS
VIHS
VILS
MS bit = 1
* : Changes when writing to TDR register
• Synchronous serial (SPI = 1, SCINV = 1)
Parameter
Symbol
Pin name
Serial clock cycle time
tSCYC
SCK ↓ → SOUT delay time
Conditions
Value
Unit
Min
Max
SCKn
4tCYCP
⎯
ns
tSLOVI
SCKn,
SOUTn
− 30
+ 30
ns
SIN → SCK ↑ setup time
tIVSHI
SCKn,
SINn
57
⎯
ns
SCK ↑ → SIN hold time
tSHIXI
SCKn,
SINn
0
⎯
ns
SOUT → SCK ↑ delay time
tSOVHI
SCKn,
SOUTn
2tCYCP − 30
⎯
ns
Serial clock “L” pulse width
tSLSH
SCKn
2tCYCP − 10
⎯
ns
Serial clock “H” pulse width
tSHSL
SCKn
tCYCP + 10
⎯
ns
SCK ↓ → SOUT delay time
tSLOVE
SCKn,
SOUTn
⎯
48
ns
SIN → SCK ↑ setup time
tIVSHE
SCKn,
SINn
25
⎯
ns
SCK ↑ → SIN hold time
tSHIXE
SCKn,
SINn
20
⎯
ns
SCK fall time
tF
SCKn
⎯
5
ns
SCK rise time
tR
SCKn
⎯
5
ns
Internal shift clock
operation
External shift clock
operation
Notes: • The above standards apply to CLK synchronous mode.
• tCYCP indicates the peripheral clock cycle time.
• When the external load capacitance C = 50 pF.
DS07-16907-3E
81
MB91610 Series
tSCYC
VOH
SCK
VOH
VOL
tSLOVI
tSOVHI
VOH
VOL
VOH
VOL
SOUT
tIVSHI
tSHIXI
VIHS
VILS
SIN
VIHS
VILS
MS bit = 0
tSHSL
tR
tSLSH
VIHS
SCK
VIHS
VILS
tSLOVE
VILS
VIHS
VILS
VOH
VOL
VOH
VOL
SOUT
tIVSHE
tSHIXE
VIHS
VILS
SIN
tF
VIHS
VILS
MS bit = 1
• External clock (EXT = 1) : asynchronous only
Parameter
Symbol
Serial clock “L” pulse width
tSLSH
Serial clock “H” pulse width
tSHSL
SCK fall time
tF
SCK rise time
tR
VIHS
VILS
82
CL = 50 pF
tSHSL
tR
SCK
Conditions
Value
Max
tCYCP + 10
⎯
ns
tCYCP + 10
⎯
ns
⎯
5
ns
⎯
5
ns
tSLSH
VIHS
VILS
Unit
Min
tF
VIHS
VILS
DS07-16907-3E
MB91610 Series
(8)
Free-run Timer Clock, Reload Timer Event Input,Input Capture Input, Interrupt Input Timing
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Symbol
tTIWH,
tTIWL
Input pulse width
Value
Pin name
Conditions
Min
Max
FRCK,
TMIn,
INn
⎯
2 tCYCP
⎯
ns
*1
⎯
3 tCYCP
⎯
ns
*1
⎯
1.0
⎯
μs
*2
INTn
Unit
Remarks
*1 : tCYCP indicates peripheral clock cycle time, except when in stop mode, in main timer mode and in watch mode.
*2 : When in stop mode, in main timer mode, or in watch mode.
FRCK
TMIn
INn
INTn
tTIWH
tTIWL
VIHS
VILS
VIHS
VILS
(9) A/D Converter Trigger Input Timing
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Value
Parameter
Symbol
Pin name
Conditions
Min
Max
A/D converter trigger
input
tTADTGL,
tTADTGH
ADTRG
⎯
2 tCYCP
⎯
Unit
ns
Remarks
*
* : tCYCP indicates peripheral clock cycle time.
tTADTGL
tTADTGH
ADTRG
VIHS
VILS
DS07-16907-3E
VIHS
VILS
83
MB91610 Series
(10) I2C Timing
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Symbol Pin name
Conditions
Typical mode
High-speed mode*3
Min
Max
Min
Max
Unit
fSCL
SCKn
(SCLn)
0
100
0
400
kHz
“(Repeated) START
condition” hold time
SDA ↓ → SCL ↓
tHDSTA
SOUTn
(SDAn),
SCKn
(SCLn)
4.0
⎯
0.6
⎯
μs
SCL clock “L” width
tLOW
SCKn
(SCLn)
4.7
⎯
1.3
⎯
μs
SCL clock “H” width
tHIGH
SCKn
(SCLn)
4.0
⎯
0.6
⎯
μs
“Repeated START
condition” setup time
SCL ↑→ SDA ↓
tSUSTA
SCKn
(SCLn)
4.7
⎯
0.6
⎯
μs
tHDDAT
SOUTn
(SDAn),
SCKn
(SCLn)
0
3.45*2
0
0.9*3
μs
tSUDAT
SOUTn
(SDAn),
SCKn
(SCLn)
250
⎯
100
⎯
ns
“STOP condition” setup
time
SCL↑→ SDA↑
tSUSTO
SOUTn
(SDAn),
SCKn
(SCLn)
4.0
⎯
0.6
⎯
μs
Bus free time between
“STOP condition” and
“START condition”
tBUF
⎯
4.7
⎯
1.3
⎯
μs
Noise filter
tSP
⎯
2 tCYCP *4
⎯
2 tCYCP *4
⎯
ns
SCL clock frequency
Data hold time
SCL ↓ → SDA ↓ ↑
Data setup time
SDA ↓ ↑→ SCL↑
CL = 50 pF,
R=
(Vp/IOL) *1
⎯
*1 : R and C represent the pull-up resistance and load capacitance of the SCL and SDA lines, respectively. Vp
indicates the power supply voltage of the pull-up resistance and IOL indicates VOL guaranteed current.
*2 : The maximum tHDDAT must satisfy that it doesn't extend at least “L” period (tLOW) of device's SCL signal.
*3 : A high-speed mode I2C bus device can be used on a standard mode I2C bus system as long as the device
satisfies the requirement of “tSUDAT ≥ 250 ns”.
*4 : tCYCP is the peripheral clock cycle time. To use I2C, set the peripheral bus clock at 8 MHz or more.
84
DS07-16907-3E
MB91610 Series
SDA
tSUSTA
tLOW
tSUDAT
tBUF
SCL
tHDSTA
tHDDAT
tHIGH
tHDSTA
tSP
tSUSTO
(11) Analog RGB
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Symbol
Analog RGB
output delay
tVAD
Analog RGB
output settling
time
tVAS
Pin name
ROUT,
GOUT,
BOUT
Conditions
VREF = 1.1 V,
VDDD = 3.3 V,
VRO* = 2.7 kΩ
Value
Unit
Remarks
⎯
ns
50 MHz (Max)
20
ns
Min
Typ
Max
⎯
12
⎯
⎯
* : VRO is an external resistance for DAC.
• Display signal output timing
0.8 VCC
DCKI
tVAD
1 LSB
ROUT
GOUT
1 LSB
50%
BOUT
tVAS
DS07-16907-3E
85
MB91610 Series
(12) Digital RGB
Vertical synchronous/ horizontal synchronous/ display output control signal input timing
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Symbol
Pin name
Horizontal synchronous signal
cycle time
tHCYC
HSYNC
Horizontal synchronous signal
pulse width
tWH
HSYNC
Horizontal synchronous signal
setup time
tDHST
Horizontal synchronous signal
hold time
Value
Unit
Remarks
Min
Max
100 + tWH
⎯
Dot clock
20
⎯
Dot clock
⎯
6
μs
4
⎯
ns
tDHHD
0
⎯
ns
Vertical synchronous signal
setup time
tHVST
5
⎯
Dot clock
Vertical synchronous signal hold
time
tHVHD
1H − 5
⎯
Dot clock
Input synchronous signal rising/
falling time
tDR,
tDF
⎯
2
ns
HSYNC
VSYNC
HSYNC,
VSYNC
*
* : H stands for the horizontal synchronous signal. 1 synchronous is 1 unit.
• Horizontal synchronous signal and display output control signal input timing
0.8 VCC
DCKI
0.2 VCC
tDHST
tDHHD
0.8 VCC
0.8 VCC
0.2 VCC
0.2 VCC
HSYNC
tDR, tDF
86
DS07-16907-3E
MB91610 Series
• Horizontal synchronous signal input
tHCYC
tWH
tDF
0.8 VCC
HSYNC
tDR
0.8 VCC
0.8 VCC
0.2 VCC
0.2 VCC
• Vertical synchronous signal input timing
• Detect VSYNC at HSYNC leading edge
tDF
HSYNC
tDF
tWH
tDR
0.8 VCC
0.8 VCC
0.2 VCC
0.2 VCC
tHVST
tHVHD
0.8 VCC
tDR
0.8 VCC
VSYNC
0.2 VCC
0.2 VCC
• Detect VSYNC at HSYNC trailing edge
tWH
tDF
HSYNC
0.8 VCC
0.8 VCC
0.2 VCC
0.2 VCC
tDF
tHVST
0.8 VCC
VSYNC
DS07-16907-3E
tDR
tHVHD
tDR
0.8 VCC
0.2 VCC
0.2 VCC
87
MB91610 Series
(13) Display signal timing
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Symbol
Pin name
tDIF
DCKI
Dot clock input cycle time
tDIWH
Dot clock input pulse width
tDIWL
Dot clock output delay time1
tPDCS
Display signal output delay time I1
tPDI1
Display signal output delay time O1
tPDO1
DCKI
DCKO
R0 to R4,
G0 to G5,
B0 to B4,
VOB,
VOA0 to
VOA2
Value
Unit
Remarks
75
MHz
*1
5
⎯
ns
5
⎯
ns
2.2
8
ns
*2
2
8.3
ns
*2
−4
+5
ns
*2
Min
Max
8
*1
*1 : Input continuous signal to the dot clock.
*2 : Output load 16 pF
Note: Actual display output varies depending on what is controlled, such as display output control and display
location control in each display layer.
• Display signal output timing
tDIF
tDIWH
DCKI
0.8 VCC
tDIWL
0.8 VCC
0.2 VCC
tPDCS
0.2 VCC
tPDCS
0.8 VCC
DCKO
tPDO1
0.2 VCC
tPDI1
R0 to R4
G0 to G5
B0 to B4
VOB
VOA0 to VOA2
88
0.8 VCC
0.2 VCC
DS07-16907-3E
MB91610 Series
5. Electrical Characteristics for the A/D Converter
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Pin name
Value
Min
Typ
Max
Unit
Resolution
⎯
⎯
⎯
10
bit
Total error
⎯
−5
⎯
+5
LSB
Linearity error
⎯
− 3.5
⎯
+ 3.5
LSB
Differential linearity error
⎯
−3
⎯
+3
LSB
Zero transition voltage
AN0 to AN7
− 1.5
+ 0.5
+4
LSB
Full transition voltage
AN0 to AN7
AVRH − 4
AVRH − 1.5 AVRH + 0.5 LSB
⎯
μs
PCLK = 33 MHz
1.2*
⎯
⎯
μs
PCLK = 33 MHz
⎯
⎯
3.5
mA D/A stopped
⎯
⎯
11
μA
⎯
⎯
0.6
mA AVRH = 3.0 V
⎯
⎯
5
μA
⎯
0.72*
Conversion time
⎯
1
AVCC
3
Reference power
supply current
(between AVRH and
AVSS)
AVRH
Analog input capacity
⎯
⎯
⎯
8.5
pF
Interchannel disparity
⎯
⎯
⎯
4
LSB
Analog port input current
AN0 to AN7
⎯
⎯
10
μA
Analog input voltage
AN0 to AN7
AVSS
⎯
AVRH
V
AVRH
AVSS
⎯
AVCC
V
Standard voltage
AVCC = 3.3 V,
AVRH = 3.3 V
⎯
Compare time
Power supply current
(analog + digital)
Remarks
At power-down*2
At power-down*2
*1 : Depending on the clock cycle supplied to peripheral resources.
Ensure that it satisfies the value; PCLK cycle × more than 4 + the value calculated from (Equation 1).
The condition of the minimum conversion time is when PCLK = 33 MHz, the value of sampling time: 0.424 μs,
external impedance: 1.4 kΩ or less and compare time: 0.72 μs.
*2 : The current when the CPU is in stop mode and the A/D converter is not operating.
*3 : Compare time = {(CT + 1) × 10 + 4} × peripheral clock (PCLK) period. (CT indicates compare time setting bits.)
The condition of the minimum compare time is when CT = 1 and PCLK = 33 MHz.
(Continued)
DS07-16907-3E
89
MB91610 Series
(Continued)
Rext
AN0 to AN7
Analog input pin
Rin
Comparator
Analog
signal source
Cin
Rin
Cin
Approx. 5.3 kΩ
Approx. 8.5 pF
The output impedance of the external circuit connected to the analog input affects the sampling time of the A/D
converter. Design the output impedance of the output circuit such that the required sampling time is less than the
value of TS calculated from the following equation.
(Equation 1) Ts = (Rin + Rext) × Cin × 8
Ts
: Sampling time
Rin
: Input resistance of A/D = 5.3 kΩ
Cin
: Input capacitance of A/D = 8.5 pF
Rext : Output impedance of external circuit
If the sampling time is set as 600 ns,
600 ns ≥ (5.3 kΩ + Rext) × 8.5 pF × 8
∴Rext ≤ 3.5 kΩ
And the impedance of the external circuit therefore needs to be 3.5 kΩ or less.
90
DS07-16907-3E
MB91610 Series
• Definition of 10-bit A/D Converter Terms
• Resolution
• Linearity error
: Analog variation that is recognized by an A/D converter.
: Deviation of the line between the zero-transition point
(0000000000←→0000000001) and the full-scale transition point
(1111111110←→1111111111) from the actual conversion characteristics.
• Differential linearity error : Deviation from the ideal value of the input voltage that is required to change the
output code by 1 LSB.
• Total error
: Difference between the actual value and the theoretical value. The total error includes
zero transition error, full-scale transition error, and linear error.
Linearity error
3FFH
Differential linearity error
Actual conversion
characteristics
Actual conversion
characteristics
(N + 1)H
3FEH
{1 LSB (N − 1) + V OT}
VFST
Ideal characteristics
(Actuallymeasured
value)
VNT
004H
(Actually-measured
value)
003H
Actual conversion
characteristics
Ideal characteristics
002H
001H
VOT
AVSS
Digital output
Digital output
3FDH
NH
(N − 1)H
VNT
(N − 2)H
(Actually-measured value)
Analog input
V(N+1)T
AVRH
(Actually-measured
value)
(Actually-measured
value)
Actual conversion characteristics
AVSS
AVRH
Analog input
VNT − {1 LSB × (N − 1) + VOT}
[LSB]
1 LSB'
V (N+1) T − VNT
− 1 [LSB]
Differential linearity error of digital output N =
1 LSB
VFST − VOT
1 LSB =
1022
Linearity error of digital output N =
N
VOT
VFST
VNT
: A/D converter digital output value.
: Voltage at which the digital output changes from 000H to 001H.
: Voltage at which the digital output changes from 3FEH to 3FFH.
: Voltage at which the digital output changes from (N − 1)H to NH.
(Continued)
DS07-16907-3E
91
MB91610 Series
(Continued)
Total error
3FFH
1.5 LSB'
3FEH
Actual conversion
characteristics
3FDH
Digital output
{1 LSB' (N − 1) + 0.5 LSB'}
004H
VNT
(Actually-measured value)
Actual conversion
characteristics
003H
002H
001H
Ideal
characteristics
0.5 LSB'
AVSS
Analog input
1 LSB' (Ideal value)
Total error of digital output N
AVRH
AVRH − AVSS
[V]
1024
VNT − {1 LSB' × (N − 1) + 0.5 LSB'}
=
1 LSB'
=
N : A/D converter digital output value.
VNT : Voltage at which the digital output changes from (N + 1)H to NH.
VOT’ (Ideal value) = AVSS + 0.5 LSB [V]
VFST’ (Ideal value) = AVRH − 1.5 LSB [V]
92
DS07-16907-3E
MB91610 Series
6. Electrical Characteristics for the Analog RGB D/A Converter
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Value
Unit
Remarks
Min
Typ
Max
⎯
⎯
5
bit
ROUT, BOUT
⎯
⎯
6
bit
GOUT
Linearity error
− 2.0
⎯
+ 2.0
LSB
When the output is unloaded
Differential linearity error
− 1.0
⎯
+ 1.0
LSB
When the output is unloaded
Analog output impedance
⎯
250
⎯
kΩ
Analog output < 1.0 V
Analog current
(R/G/BOUT)
4.5
5.2
5.8
mA
Full-scale*
0
2
20
μA
Zero-scale
Power supply current
(VDDD)
⎯
25
27
mA
VREF = 1.1 V
Resolution
*: The calculating formula of analog current (R/G/BOUT) in full-scale is as follows.
R/G/BOUT = (VREF / RREF) × 12.75
Typical value is defined in case of VREF = 1.1 V, RREF = 2.7 kΩ.
DS07-16907-3E
93
MB91610 Series
7. USB Characteristics
(VCC = AVCC = 3.0 V to 3.6 V, VSS = AVSS = 0 V, Ta = − 40 °C to + 85 °C)
Parameter
Input High level
voltage
Pin
name
Conditions
Value
Min
Max
Unit
Remarks
VIH
⎯
2.0
VCC + 0.3
V
*1
VIL
⎯
VSS − 0.3
0.8
V
*1
VDI
⎯
0.2
⎯
V
*2
VCM
⎯
0.8
2.5
V
*2
VOH
External
pull-down
resistance =
15 kΩ
2.8
3.6
V
*3
VOL
External
pull-up
resistance =
1.5 kΩ
0.0
0.3
V
*3
VCRS
⎯
1.3
2.0
V
*4
Rise time
tFR
⎯
4
20
nS
*5
Fall time
tFF
⎯
4
20
nS
*5
Rise/fall
time matching
tRFM
⎯
90
111.11
%
*5
Output impedance
ZDRV
⎯
28
44
Ω
Including
Rs = 27 Ω
Transceiver edge
rate control
capacitance
CEDGE
⎯
⎯
75
pF
*6
RS
⎯
25
30
Ω
Recommended
value:27 Ω
Input Low level
voltage
Input
characteristics Differential input
sensitivity
Differential common
mode input voltage
Output High level
voltage
Output Low level
voltage
Output
characteristics Crossover voltage
Input
capacitance
Symbol
Series resistance
UDP,
UDM
*1 : The switching threshold voltage of Single-End-Receiver of USB I/O buffer is set as within VIL (Max) = 0.8 [V],
VIH (Min) = 2.0 [V] (TTL input standard).
There are some hystereses to lower noise sensitivity.
(Continued)
94
DS07-16907-3E
MB91610 Series
*2 : Use differential-Receiver to receive USB differential data signal.
Differential-Receiver has 200 [mV] of differential input sensitivity when the differential data input is within 0.8 [V]
to 2.5 [V] to the local ground reference level.
Above voltage range is the common mode input voltage range.
Minimum differential input sensitivity [V]
1.0 [V]
0.2 [V]
0.8 [V]
2.5 [V]
Common mode input voltage [V]
*3 : The output drive capability of the driver is below 0.3 [V] at Low-State (VOL) (to 3.6 [V] and 1.5 kΩ load), and
2.8 [V] or above (to the VSS and 15 kΩ load) at High-State (VOH).
*4 : The cross voltage of the external differential output signal (D + /D − ) of USB I/O buffer is within 1.3 [V] to 2.0 [V].
D+
Max 2.0 [V]
VCRS standard range
Min 1.3 [V]
D-
*5 : Regarding tFR, tFF, tRFM
They indicate rise time (Trise) and fall time (Tfall) of the differential data signal.
They are defined by the time between 10% to 90% of the output signal voltage.
For full-speed buffer, tFR/tFF ratio is regulated as within ±10% to minimize RFI emission.
Rise time
UDP
UDM
VCRS
90%
Fall time
90%
10%
10%
tFR
tFF
(Continued)
DS07-16907-3E
95
MB91610 Series
(Continued)
*6 : The place to connect transceiver edge rate control capacitance CEDGE
For this USB I/O, it is recommended to use CEDGE control capacitor.
For USB Max standard as 75 pF, please control the edge characteristic of output waveform by connecting
30 [pF] to 50 [pF] (recommended value : 47 [pF] =: 50[pF]) to D + and D − lines when implementing on the board.
RS = 27 Ω
+D
CEDGE
3-State
RS = 27 Ω
-D
CEDGE
Driver output impedance 3 Ω to 19 Ω
Rs serial resistance value 25 Ω to 30 Ω
Please apply 27 Ω of serial resistance value as a recommended value.
96
DS07-16907-3E
MB91610 Series
8. Flash Memory Write/Erase Characteristics
(VCC = 3.3 V, Ta = + 25 °C)
Parameter
Value
Unit
Remarks
3.6
s
Excludes write time prior to internal erase
23
370
μs
Not including system-level overhead time.
⎯
10.8
43.2
s
Excludes write time prior to internal erase
10000
⎯
⎯
cycle Average Ta ≤ + 85 °C
10*2
⎯
⎯
year
Min
Typ
Max
Sector erase time
⎯
0.9
Half word (16bits) write time
⎯
Chip erase time*
1
Erase/write cycles
Flash memory
data hold time
Average Ta ≤ + 85 °C
*1 : The chip erase time is the sector erase time multiplied across all sectors.
*2 : This value comes from the technology qualification (using Arrhenius equation to translate high temperature
measurements into normalized value at + 85 °C) .
DS07-16907-3E
97
MB91610 Series
■ ORDERING INFORMATION
Part number
MB91F610APMC
MB91613PMC
98
Package
120-pin plastic LQFP
(FPT-120P-M21)
DS07-16907-3E
MB91610 Series
■ PACKAGE DIMENSION
120-pin plastic LQFP
Lead pitch
0.50 mm
Package width ×
package length
16.0 × 16.0 mm
Lead shape
Gullwing
Sealing method
Plastic mold
Mounting height
1.70 mm MAX
Weight
0.88 g
Code
(Reference)
P-LFQFP120-16×16-0.50
(FPT-120P-M21)
120-pin plastic LQFP
(FPT-120P-M21)
Note 1) * : These dimensions do not include resin protrusion.
Resin protrusion is +0.25(.010) MAX(each side).
Note 2) Pins width and pins thickness include plating thickness.
Note 3) Pins width do not include tie bar cutting remainder.
18.00±0.20(.709±.008)SQ
+0.40
* 16.00 –0.10 .630 +.016
–.004 SQ
90
61
91
60
0.08(.003)
Details of "A" part
+0.20
1.50 –0.10
+.008
(Mounting height)
.059 –.004
INDEX
0~8°
120
LEAD No.
1
30
0.50(.020)
C
"A"
31
0.22±0.05
(.009±.002)
0.08(.003)
M
0.145
.006
2002-2010 FUJITSU SEMICONDUCTOR LIMITED F120033S-c-4-7
+0.05
–0.03
+.002
–.001
0.60±0.15
(.024±.006)
0.10±0.05
(.004±.002)
(Stand off)
0.25(.010)
Dimensions in mm (inches).
Note: The values in parentheses are reference values.
Please check the latest package dimension at the following URL.
http://edevice.fujitsu.com/package/en-search/
DS07-16907-3E
99
MB91610 Series
■ MAJOR CHANGES IN THIS EDITION
A change on a page is indicated by a vertical line drawn on the left side of that page.
Page
Section
Change Results
⎯
93
100
⎯
Changed the Company name.
Fujitsu Microelectronics Limited → Fujitsu Semiconductor Limited
■ ELECTRICAL CHARACTERISTICS Changed the parameter.
6. Electrical Characteristics for
“Analog current (R/B/GOUT)” → “Analog current (R/G/BOUT)”
the Analog RGB D/A Converter
Added the following footnote.
“*: The calculating formula of analog current (R/G/BOUT) in
full-scale is as follows.
R/G/BOUT = (VREF / RREF) × 12.75
Typical value is defined in case of VREF = 1.1 V, RREF = 2.7 kΩ.”
DS07-16907-3E
MB91610 Series
MEMO
DS07-16907-3E
101
MB91610 Series
MEMO
102
DS07-16907-3E
MB91610 Series
MEMO
DS07-16907-3E
103
MB91610 Series
FUJITSU SEMICONDUCTOR LIMITED
Nomura Fudosan Shin-yokohama Bldg. 10-23, Shin-yokohama 2-Chome,
Kohoku-ku Yokohama Kanagawa 222-0033, Japan
Tel: +81-45-415-5858
http://jp.fujitsu.com/fsl/en/
For further information please contact:
North and South America
FUJITSU SEMICONDUCTOR AMERICA, INC.
1250 E. Arques Avenue, M/S 333
Sunnyvale, CA 94085-5401, U.S.A.
Tel: +1-408-737-5600 Fax: +1-408-737-5999
http://us.fujitsu.com/micro/
Asia Pacific
FUJITSU SEMICONDUCTOR ASIA PTE. LTD.
151 Lorong Chuan,
#05-08 New Tech Park 556741 Singapore
Tel : +65-6281-0770 Fax : +65-6281-0220
http://sg.fujitsu.com/semiconductor/
Europe
FUJITSU SEMICONDUCTOR EUROPE GmbH
Pittlerstrasse 47, 63225 Langen, Germany
Tel: +49-6103-690-0 Fax: +49-6103-690-122
http://emea.fujitsu.com/semiconductor/
FUJITSU SEMICONDUCTOR SHANGHAI CO., LTD.
30F, Kerry Parkside, 1155 Fang Dian Road, Pudong District,
Shanghai 201204, China
Tel : +86-21-6146-3688 Fax : +86-21-6146-3660
http://cn.fujitsu.com/fss/
Korea
FUJITSU SEMICONDUCTOR KOREA LTD.
902 Kosmo Tower Building, 1002 Daechi-Dong,
Gangnam-Gu, Seoul 135-280, Republic of Korea
Tel: +82-2-3484-7100 Fax: +82-2-3484-7111
http://kr.fujitsu.com/fsk/
FUJITSU SEMICONDUCTOR PACIFIC ASIA LTD.
10/F., World Commerce Centre, 11 Canton Road,
Tsimshatsui, Kowloon, Hong Kong
Tel : +852-2377-0226 Fax : +852-2376-3269
http://cn.fujitsu.com/fsp/
Specifications are subject to change without notice. For further information please contact each office.
All Rights Reserved.
The contents of this document are subject to change without notice.
Customers are advised to consult with sales representatives before ordering.
The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose
of reference to show examples of operations and uses of FUJITSU SEMICONDUCTOR device; FUJITSU SEMICONDUCTOR does not
warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device
based on such information, you must assume any responsibility arising out of such use of the information.
FUJITSU SEMICONDUCTOR assumes no liability for any damages whatsoever arising out of the use of the information.
Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use
or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU SEMICONDUCTOR or
any third party or does FUJITSU SEMICONDUCTOR warrant non-infringement of any third-party's intellectual property right or other
right by using such information. FUJITSU SEMICONDUCTOR assumes no liability for any infringement of the intellectual property
rights or other rights of third parties which would result from the use of information contained herein.
The products described in this document are designed, developed and manufactured as contemplated for general use, including without
limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured
as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to
the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear
facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon
system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite).
Please note that FUJITSU SEMICONDUCTOR will not be liable against you and/or any third party for any claims or damages arising in
connection with above-mentioned uses of the products.
Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by
incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current
levels and other abnormal operating conditions.
Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of
the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws.
The company names and brand names herein are the trademarks or registered trademarks of their respective owners.
Edited: Sales Promotion Department