L\2012年9月SPCE切換新表單\未正式改版發行\SMD\ST\ST1209

SPECIFICATION FOR APPROVAL
REF. :
ST1209□□□□L□-□□□
ABC'S DWG NO.
PROD.
SMD Toroidal Power Filter
NAME
REV.
20130517-A
PAGE
1
A'
C'
C
4R7
A
Ⅰ﹒Configuration and dimensions:
D
B
9.15
10.8
3
2
1.25
1
( PCB Pattern )
4
Unit:m/m
A
A'
B
C
C'
D
10.80±0.30
11.20 max.
10.90±0.30
7.90 typ.
8.90 max.
9.15 typ.
Ⅱ﹒Schematic diagram:
1 2
3 4
Ⅲ﹒Description:
a﹒Ferrite toroidal core construction.
b﹒Enamelled copper wire:F class
Peak Temp:245℃ max.
Max. Peak Temp - 5℃:30sec max.
Max time above 217℃ :60sec~150sec max.
c﹒Product weight:1.60 g(ref.)
Temperature
Rising Area
d﹒Moisture sensitivity Level 1
Preheat Area
+4.0℃ / sec max.
e﹒Products comply with RoHS' requirements
250
f﹒Halogen free available
200
150 ~ 200℃ / 60 ~ 120sec
Reflow Area
Forced Cooling Area
+3.0℃ / sec max. -(1.0 ~ 5.0)℃ / sec max.
Peak Temperature:
245℃
Ⅳ﹒General specification:
a﹒Storage Temp.:-40℃ ----+125℃
b﹒Operating Temp.:-40℃----+125℃
(Temp. rise included)
c﹒Resistance to solder heat:245℃.10 Secs.
AR-001C
Temperature ( ℃ )
217℃
60sec~150sec
60sec max.
150
60sec~120sec
100
50
0
50
100
150
Time ( seconds )
200
250
SPECIFICATION FOR APPROVAL
REF. :
ST1209□□□□L□-□□□
ABC'S DWG NO.
PROD.
SMD Toroidal Power Filter
NAME
REV.
20130517-A
PAGE
2
Ⅴ﹒Electrical characteristics:
Inductance
@10KHz, 0.1 Vrms
( μH )
DWG No.
RDC(mΩ)
( Each Winding )
max.
Irms(A)
typ.
Isat(A)
typ.
typ.
ST12094R7ML□-□□□
4.70 ± 20%
18.0
13.7
5.4
5.10
ST1209130ML□-□□□
13.00 ± 20%
38.0
28.8
4.0
3.00
ST1209330ML□-□□□
33.00 ± 20%
86.0
66.3
2.6
1.85
:Packaging information:
1).
2). "-
□□□":Reference code
Code
3). Electrical specifications at 25℃
4). Irms base on Temp. rise 40℃ typ.
5). Isat base on △L/L0A=35% typ.
@ Inductance VS. DC Current Curve
@ DC Current VS. Temp. Rise ( △T ) Curve
40
330
35
30
Temperature Rise(℃)
Inductance(uH)
40
25
20
15
130
10
5
4R7
0
0
1
DC Current(A)
AR-001C
10
35
330
330
130
330
330
4R7
3
4
30
25
20
15
10
5
0
0
1
2
DC Current(A)
5
6
SPECIFICATION FOR APPROVAL
REF. :
ST1209□□□□L□-□□□
ABC'S DWG NO.
PROD.
SMD Toroidal Power Filter
NAME
REV.
20130517-A
PAGE
3
Ⅵ﹒Packaging information:
( 1 ) Configuration
T
Cover Tape
N
B
A
2.0±0.5
∮C
∮C
D
G
Embossed carrier
※Carrier tape width : D
P: 16m/m
4 m/m
End
Start
4R7
4R7
Leader
no component
200 m/m min.
4R7
4R7
Trailer
no component
400 m/m min.
Components
User direction of feed
(2) Dimensions : (m/m)
Style
A
13 - 24
330
B
21±0.8
C
D
G
13±0.5
24
+0
26
N
60
T
-0
30.4
(3) Q'TY & G.W. Per package :
Inner : Reel
Code
B
AR-001C
Q'TY (pcs)
400
G.W. (gw)
750
Outer : Carton
Style
13 - 24
Q'TY (pcs)
1600
G.W. (kg)
4.0
Size (cm)
38 x 37 x 22
SPECIFICATION FOR APPROVAL
REF. :
ABC'S DWG NO.
PROD.
SMD Toroidal Power Filter
NAME
REV.
ST1209□□□□L□-□□□
20130517-A
PAGE
4
Ⅶ﹒Reliability test:
Item
1.High Temperature
Exposure
Reference documents
MIL-STD-202 Method 108
Test Condition
1.Temperature: 125℃
2.Time:96 hours.
1.Temperature: -40℃ ~ 125℃
2.Temperature Cycling JESD22 Method JA-104
2.Number of cycle:96 cycle
3.Dwell time:30 minutes
3.Biased Humidity Test MIL-STD-202 Method 103
1.Temperature: 85±5 ℃
2.Time:96 Hours
3.Humidity: 85±5% RH.
1.Temperature: 125℃
2.Time:96 hours.
3.Apply rated current.
4.Operational Life
MIL-PRF-27
5.Exeternal Visual
MIL-STD-883 Method 2009 constructions, marking and
Inspect product
workmanship.
Test Specification
1.No mechanical and electrical
damage.
2.Inductance shall not change
more than ±25%.
1.No mechanical and electrical
damage.
2.Inductance shall not change
more than ±25%.
1.No mechanical and electrical
damage.
2.Inductance shall not change
more than ±25%.
1.No mechanical and electrical
damage.
2.Inductance shall not change
more than ±25%.
1.No pollution on the surface of
products.
2.Clear marking.
3.No crack.
6.Physical Dimensions JESD22 Method JB-100
Verify physical dimensions to
the applicable product detail
specification.
Per product specification
standard
7.Resistance to solvents MIL-STD-202 Method 215
Immerse into solvent for 3±0.5 minutes &
brush 10 times for therr cycles.
1.No body change in apperarance.
2.No marking blurred.
3.Inductance shall not change
more than ±25%.
8.Vibration Test
MIL-STD-202 Method 204
1.Frequency and Amplitued :
10-2000-10 Hz, 1.5 mm.
2.Direction:X, Y, Z
3.Test duration:2 hours for each direction,
6 hours in total.
1.No mechanical and electrical
damage.
2.Inductance shall not change
more than ±25%.
9.Resistance To
Soldering Heat Test
MIL-STD-202 Method 210
1.Highest temperature: 245±5℃
2.Time(temp.≧ 217℃):60~150 Second.
3.IR reflow times:3 times.
10.Rated current
MIL-STD-202 Method 330
11.Temperature rise
MIL-PRF-27
12.Over load
MIL-PRF-27
1.No mechanical and electrical
damage.
2.Inductance shall not change
more than ±25%.
1.No mechanical and electrical
damage.
Apply rated current for 5 second.
2.Inductance shall not change
more than ±25%.
1.No mechanical and electrical
damage.
Apply rated current for 10 minutes.
2.Inductance shall not change
more than ±25%.
1.No mechanical and electrical
damage.
Apply twice as rated current for 5 minutes.
(It's not application to some special design) 2.Inductance shall not change
more than ±25%.
1.Baking in pre-testing:
155±5℃ / 16Hours±30 min.
2.Peak temperature:240±5℃
3.Time(temp.≧217℃):60~150 second.
4.IR reflow times:1 times.
The terminal shall be at least 95%
covered with fresh solder.
User Spec.
1.Operating temperature: -40℃~125℃
2.Room temperature:25℃.
1.No mechanical and electrical
damage.
2.Inductance shall not change
more than ±25%.
MIL-STD-202 Method 201
1.DV:500V
2.Time:1minutes
16.Drop
JESD22-B111
Packaged & Drop down from 1m.In 1 angle
1ridges & 2 surfaces orientation.
17.Terminal Strength
Test
JIS-C-6429
1.Apply push force to samples
mounted on PCB.
2.Force of 1.8 kg for 60±1 seconds.
13.Solderability Test
14.Electrical
Characteriazation
15.Withstanding
Voltage Test
AR-001C
J-STD-002
1.During the test no breakdown.
2.The characteristic is normal after test.
1.No case deformation or change in
appearance.
2.Inductance shall not change
more than ±25%.
After test, inductors shall be no
mechanical damage.