SPECIFICATION FOR APPROVAL REF. : SS1208□□□□L□-□□□ ABC'S DWG NO. PROD. Shielded SMD Power Inductor NAME REV. 20130115-C PAGE 1 B 101 Ⅰ﹒Configuration and dimensions: Marking Inductance code C A F H E I G I ( PCB Pattern ) Unit:m/m A B C 12.70 ±0.3 12.70 ±0.3 8.00 ±0.5 E F 2.30 ±0.2 G 5.00 ±0.2 H 6.00 ref. I 7.00 ref. 4.00 ref. Ⅱ﹒Description: a﹒Ferrite drum core construction. b﹒Magnetically shielded. c﹒Enamelled copper wire:F class d﹒Product weight:4.25 g(ref.) e﹒Moisture sensitivity Level 1 Peak Temp:245℃ max. Max. Peak Temp - 5℃:30sec max. Max time above 217℃ :60sec~150sec max. f﹒Products comply with RoHS' requirements Temperature Rising Area g﹒Halogen free available Preheat Area +4.0℃ / sec max. 150 ~ 200℃ / 60 ~ 120sec Reflow Area Peak Temperature: 245℃ 250 a﹒Storage temp.:-40℃ ----+125℃ b﹒Operating temp.:-40℃----+125℃ (Temp. rise included) c﹒Resistance to solder heat:245℃.10 secs. AR-001C 217℃ Temperature ( ℃ ) Ⅲ﹒General specification: Forced Cooling Area +3.0℃ / sec max. -(1.0 ~ 5.0)℃ / sec max. 60sec~150sec 200 60sec max. 150 60sec~120sec 100 50 0 50 100 150 Time ( seconds ) 200 250 SPECIFICATION FOR APPROVAL REF. : ABC'S DWG NO. PROD. Shielded SMD Power Inductor NAME REV. SS1208□□□□L□-□□□ 20130115-C PAGE 2 Ⅳ﹒Electrical characteristics: Test Freq. ( Hz ) SRF ( MHz ) min SS12082R5ML□-□□□ 2.5±20% 1K 37.0 RDC ( mΩ ) max 11.4 SS12084R5ML□-□□□ 4.5±20% 1K 30.0 14.0 6.80 SS12086R5ML□-□□□ 6.5±20% 1K 20.0 18.0 6.50 SS1208100ML□-□□□ 10.0±20% 1K 15.0 21.0 5.40 SS1208120ML□-□□□ 12.0±20% 1K 11.0 25.0 4.90 SS1208150ML□-□□□ 15.0±20% 1K 11.0 36.0 4.50 SS1208180ML□-□□□ 18.0±20% 1K 9.00 40.0 3.90 SS1208220ML□-□□□ 22.0±20% 1K 7.00 43.0 3.60 SS1208270ML□-□□□ 27.0±20% 1K 6.50 48.0 3.40 SS1208330YL□-□□□ 33.0±15% 1K 6.50 62.0 3.00 SS1208390YL□-□□□ 39.0±15% 1K 6.00 76.0 2.70 SS1208470YL□-□□□ 47.0±15% 1K 5.00 85.0 2.50 SS1208560YL□-□□□ 56.0±15% 1K 5.00 110.0 2.30 SS1208680YL□-□□□ 68.0±15% 1K 5.00 135.0 2.10 SS1208820YL□-□□□ 82.0±15% 1K 4.00 150.0 1.90 SS1208101YL□-□□□ 100.0±15% 1K 4.00 170.0 1.70 SS1208121YL□-□□□ 120.0±15% 1K 3.00 190.0 1.50 SS1208151YL□-□□□ 150.0±15% 1K 3.00 240.0 1.40 SS1208181YL□-□□□ 180.0±15% 1K 2.50 270.0 1.30 SS1208221KL□-□□□ 220.0±10% 1K 2.50 380.0 1.10 SS1208271KL□-□□□ 270.0±10% 1K 2.00 400.0 1.00 SS1208331KL□-□□□ 330.0±10% 1K 1.80 650.0 0.90 SS1208391KL□-□□□ 390.0±10% 1K 1.60 670.0 0.85 SS1208471KL□-□□□ 470.0±10% 1K 1.40 850.0 0.80 SS1208561KL□-□□□ 560.0±10% 1K 1.40 900.0 0.70 SS1208681KL□-□□□ 680.0±10% 1K 1.20 1000.0 0.65 SS1208821KL□-□□□ 820.0±10% 1K 1.20 1150.0 0.60 SS1208102KL□-□□□ 1000.0±10% 1K 1.00 1650.0 0.55 SS1208122KL□-□□□ 1200.0±10% 1K 0.80 2000.0 0.40 SS1208152KL□-□□□ 1500.0±10% 1K 0.80 2350.0 0.36 DWG No. 1). 2). "- Inductance ( uH ) :Packaging information: □□□":Reference code 3). Electrical specifications at 25℃ AR-001C Code 4). IDC base on Temp. rise 40℃ max. & △L/L0A=10% max. IDC (A) max 7.80 SPECIFICATION FOR APPROVAL REF. : PROD. NAME SS1208□□□□L□-□□□ ABC'S DWG NO. Shielded SMD Power Inductor REV. 20130115-C Ⅴ﹒Curve: Inductance(uH) 103 7 5 @ Inductance VS. DC Current Curve 102 3 2 331 102 7 5 101 3 2 270 101 7 5 100 3 2 100 101 2 3 5 7 102 2 3 5 7 103 2 3 5 7 104 DC Current (mA) @ DC Current VS. Temp. Rise Curve 103 7 5 (℃) 3 2 102 7 5 102K331K101Y270M 100M 3 2 10 1 7 5 3 2 10 0 101 2 3 5 7 10 2 2 3 5 7 103 2 3 DC Current (mA) AR-001C 5 7 104 PAGE 3 SPECIFICATION FOR APPROVAL REF. : SS1208□□□□L□-□□□ ABC'S DWG NO. PROD. Shielded SMD Power Inductor NAME REV. 20130115-C PAGE 4 Ⅵ﹒Packaging information: ( 1 ) Configuration T Cover tape A B N 2.0±0.5 ∮C ∮C D G Embpssed carrier ※Carrier tape width : D P:20 m/m 4 m/m End Start 101 Leader no component 200 m/m min. 101 101 101 Trailer no component 400 m/m min. Components User direction of feed ( 2 ) Dimensions Unit:m/m Style A 13 - 24 330 B 21±0.8 C D 13±0.5 24 G 26 +0 N 60 -0 T 30.4 ( 3 ) Q'TY & G.W. Per package Inner : Reel Code B AR-001C Q'TY (pcs) 400 Outer : Carton G.W. (gw) Style Q'TY (pcs) G.W. (Kg) Size (cm) 2100 13 - 24 1,600 10.6 38 x 37 x 22 SPECIFICATION FOR APPROVAL REF. : SS1208□□□□L□-□□□ ABC'S DWG NO. PROD. Shielded SMD Power Inductor NAME REV. 20130115-C PAGE 5 Ⅶ﹒Reliability test: Item 1.High Temperature Exposure Reference documents MIL-STD-202 Method 108 Test Condition 1.Temperature: 125℃ 2.Time:96 hours. 1.Temperature: -40℃ ~ 125℃ 2.Temperature Cycling JESD22 Method JA-104 2.Number of cycle:96 cycle 3.Dwell time:30 minutes 3.Biased Humidity Test MIL-STD-202 Method 103 1.Temperature: 85±5 ℃ 2.Time:96 Hours 3.Humidity: 85±5% RH. 1.Temperature: 125℃ 2.Time:96 hours. 3.Apply rated current. 4.Operational Life MIL-PRF-27 5.Exeternal Visual MIL-STD-883 Method 2009 constructions, marking and Inspect product workmanship. Test Specification 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 1.No pollution on the surface of products. 2.Clear marking. 3.No crack. 6.Physical Dimensions JESD22 Method JB-100 Verify physical dimensions to the applicable product detail specification. Per product specification standard 7.Resistance to solvents MIL-STD-202 Method 215 Immerse into solvent for 3±0.5 minutes & brush 10 times for therr cycles. 1.No body change in apperarance. 2.No marking blurred. 3.Inductance shall not change more than ±20%. 8.Vibration Test MIL-STD-202 Method 204 1.Frequency and Amplitued : 10-2000-10 Hz, 1.5 mm. 2.Direction:X, Y, Z 3.Test duration:2 hours for each direction, 6 hours in total. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 9.Resistance To Soldering Heat Test MIL-STD-202 Method 210 1.Highest temperature: 245±5℃ 2.Time(temp.≧ 217℃):60~150 Second. 3.IR reflow times:3 times. 10.Rated current MIL-STD-202 Method 330 11.Temperature rise MIL-PRF-27 12.Over load MIL-PRF-27 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. Apply rated current for 5 second. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. Apply rated current for 10 minutes. 2.Inductance shall not change more than ±20%. 1.No mechanical and electrical damage. Apply twice as rated current for 5 minutes. (It's not application to some special design) 2.Inductance shall not change more than ±20%. 1.Baking in pre-testing: 155±5℃ / 16Hours±30 min. 2.Peak temperature:240±5℃ 3.Time(temp.≧217℃):60~150 second. 4.IR reflow times:1 times. The terminal shall be at least 95% covered with fresh solder. User Spec. 1.Operating temperature: -40℃~125℃ 2.Room temperature:25℃. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±20%. MIL-STD-202 Method 201 1.DV:500V 2.Time:1minutes 16.Drop JESD22-B111 Packaged & Drop down from 1m.In 1 angle 1ridges & 2 surfaces orientation. 17.Terminal Strength Test JIS-C-6429 1.Apply push force to samples mounted on PCB. 2.Force of 1.8 kg for 60±1 seconds. 13.Solderability Test 14.Electrical Characteriazation 15.Withstanding Voltage Test AR-001C J-STD-002 1.During the test no breakdown. 2.The characteristic is normal after test. 1.No case deformation or change in appearance. 2.Inductance shall not change more than ±20%. After test, inductors shall be no mechanical damage.