SPECIFICATION FOR APPROVAL REF. : SQ0703□□□□L□-□□□ ABC'S DWG NO. PROD. SMD Power Inductor NAME REV. 20140610-C PAGE 1 Ⅰ﹒Configuration and dimensions： Marking B 100 A F D E H D C' C Dot is start winding & inductance code G I I （PCB Pattern） Unit：m/m A B C C' D E 6.50 ±0.3 4.50 ±0.2 2.50 ±0.2 2.70 ±0.3 0.80 ref. F 2.40 ref. 4.90 ref. G H I 4.00 ref. 3.20 ref. 1.50 ref. Ⅱ﹒Description： a﹒Ferrite drum core construction. b﹒Enamelled copper wire：F class c﹒Product weight： 0.20 g（ref.） Peak Temp：260℃ max. Max. Peak Temp - 5℃：30sec max. Max time above 217℃ ：60sec~150sec max. d﹒Moisture sensitivity Level 1 e﹒Products comply with RoHS' requirements Temperature Rising Area f﹒Halogen free available Preheat Area +4.0℃ / sec max. 150 ~ 200℃ / 60 ~ 120sec Reflow Area Forced Cooling Area +3.0℃ / sec max. -(1.0 ~ 5.0)℃ / sec max. Peak Temperature: 260℃ 250 Ⅲ﹒General specification： a﹒Storage temp.：-40℃ ----+125℃ b﹒Operating temp.：-40℃----+125℃ (Temp. rise included) c﹒Resistance to solder heat：260℃.10 secs. AR-001C Temperature ( ℃ ) 217℃ 60sec~150sec 200 60sec max. 150 60sec~120sec 100 50 0 50 100 150 Time ( seconds ) 200 250 SPECIFICATION FOR APPROVAL REF. : ABC'S DWG NO. PROD. SMD Power Inductor NAME REV. SQ0703□□□□L□-□□□ 20140610-C PAGE 2 Ⅳ﹒Electrical characteristics： DWG No. Inductance ( μH ) SQ07031R0ML□-□□□ 1.00±20% SQ07031R2ML□-□□□ 1.20±20% SQ07031R8ML□-□□□ 1.80±20% SQ07032R2ML□-□□□ 2.20±20% SQ07032R7ML□-□□□ 2.70±20% SQ07033R3ML□-□□□ 3.30±20% SQ07033R9ML□-□□□ 3.90±20% SQ07034R7ML□-□□□ 4.70±20% SQ07035R6ML□-□□□ 5.60±20% SQ07036R8ML□-□□□ 6.80±20% SQ07038R2ML□-□□□ 8.20±20% SQ0703100KL□-□□□ 10.00±10% SQ0703120KL□-□□□ 12.00±10% SQ0703150KL□-□□□ 15.00±10% SQ0703180KL□-□□□ 18.00±10% SQ0703220KL□-□□□ 22.00±10% SQ0703270KL□-□□□ 27.00±10% SQ0703330KL□-□□□ 33.00±10% SQ0703390KL□-□□□ 39.00±10% SQ0703470KL□-□□□ 47.00±10% SQ0703560KL□-□□□ 56.00±10% SQ0703680KL□-□□□ 68.00±10% SQ0703820KL□-□□□ 82.00±10% SQ0703101KL□-□□□ 100.00±10% SQ0703121KL□-□□□ 120.00±10% SQ0703151KL□-□□□ 150.00±10% SQ0703181KL□-□□□ 180.00±10% SQ0703221KL□-□□□ 220.00±10% SQ0703271KL□-□□□ 270.00±10% SQ0703331KL□-□□□ 330.00±10% SQ0703391KL□-□□□ 390.00±10% SQ0703471KL□-□□□ 470.00±10% SQ0703561KL□-□□□ 560.00±10% SQ0703681KL□-□□□ 680.00±10% SQ0703821KL□-□□□ 820.00±10% SQ0703102KL□-□□□ 1000.00±10% 1). 2). "- ：Packaging information： □□□ "：Reference code 3). Electrical specifications at 25℃ AR-001C Q ref. 25 25 25 24 23 23 22 20 20 20 20 23 20 23 20 20 20 17 18 20 20 18 18 33 32 30 33 31 30 33 36 33 36 32 32 30 Test Freq ( MHz ) L Q 100K/0.1V 7.96 100K/0.1V 7.96 100K/0.1V 7.96 100K/0.1V 7.96 100K/0.1V 7.96 100K/0.1V 7.96 100K/0.1V 7.96 100K/0.1V 7.96 100K/0.1V 7.96 100K/0.1V 7.96 100K/0.1V 7.96 100K/0.1V 2.52 100K/0.1V 2.52 100K/0.1V 2.52 100K/0.1V 2.52 100K/0.1V 2.52 100K/0.1V 2.52 100K/0.1V 2.52 100K/0.1V 2.52 100K/0.1V 2.52 100K/0.1V 2.52 100K/0.1V 2.52 100K/0.1V 2.52 100K/0.1V 0.796 100K/0.1V 0.796 100K/0.1V 0.796 100K/0.1V 0.796 100K/0.1V 0.796 100K/0.1V 0.796 100K/0.1V 0.796 100K/0.1V 0.796 100K/0.1V 0.796 100K/0.1V 0.796 100K/0.1V 0.796 100K/0.1V 0.796 100K/0.1V 0.252 Code SRF (MHz) nom. 160.0 145.0 105.0 95.0 80.0 65.0 70.0 60.0 56.0 45.0 40.0 36.0 36.0 30.0 30.0 26.0 20.0 20.0 18.0 15.0 13.0 13.0 12.0 11.0 10.0 9.0 7.0 7.0 7.0 6.0 5.5 5.0 4.2 4.0 3.6 3.2 RDC (Ω) max. 0.042 0.047 0.052 0.060 0.065 0.075 0.080 0.100 0.105 0.115 0.150 0.170 0.180 0.240 0.280 0.300 0.400 0.450 0.550 0.720 0.800 0.900 1.180 1.560 1.750 2.000 2.700 3.000 3.600 4.800 6.200 7.000 9.200 10.500 12.000 14.200 Irms 1 (mA)max. △T=20℃ 2200 2000 1900 1800 1700 1650 1580 1500 1400 1300 1100 1000 900 750 700 650 600 560 500 400 390 380 330 270 260 250 190 180 170 160 140 130 110 100 90 80 Irms 2 (mA)max. △T=40℃ 3200 3000 2700 2600 2500 2350 2250 2100 2000 1900 1500 1400 1300 1120 1050 950 880 820 730 640 600 560 470 400 365 340 300 280 250 220 190 180 155 145 135 125 SPECIFICATION FOR APPROVAL REF. : SQ0703□□□□L□-□□□ ABC'S DWG NO. PROD. SMD Power Inductor NAME REV. 20140610-C PAGE Ⅴ﹒Curve： SQ07031R0ML□ 1.00 80.0 70.0 0.80 50.0 △ T(℃ ) L(uH) 60.0 0.60 0.40 40.0 30.0 20.0 0.20 10.0 0.0 0.00 0.0 0.5 1.0 1.5 2.0 IDC(A) 2.5 3.0 3.5 0.0 4.0 0.5 1.0 1.5 2.0 IDC(A) 2.5 3.0 3.5 4.0 40.0 80.0 35.0 70.0 30.0 60.0 25.0 50.0 △ T(℃ ) L(uH) SQ0703330KL□ 20.0 40.0 15.0 30.0 10.0 20.0 5.0 10.0 0.0 0.0 0.0 0.2 0.4 0.6 0.8 0.0 1.0 0.2 0.4 0.6 IDC(A) IDC(A) 0.8 1.0 1.2 SQ0703221KL□ 70.0 250.0 60.0 200.0 △ T(℃ ) L(uH) 50.0 150.0 40.0 30.0 100.0 20.0 50.0 10.0 0.0 0.0 0.00 0.05 0.10 0.15 0.20 IDC(A) 0.25 0.30 0.00 0.35 0.05 0.10 0.15 0.20 IDC(A) 0.25 0.30 0.35 SQ0703102KL□ 70.0 1,200 60.0 1,000 50.0 △ T(℃ ) L(uH) 800 600 400 30.0 20.0 200 10.0 0.0 0 0.00 AR-001C 40.0 0.02 0.04 0.06 0.08 0.10 IDC(A) 0.12 0.14 0.16 0.00 0.02 0.04 0.06 0.08 IDC(A) 0.10 0.12 0.14 0.16 3 SPECIFICATION FOR APPROVAL REF. : SQ0703□□□□L□-□□□ ABC'S DWG NO. PROD. SMD Power Inductor NAME REV. 20140610-C PAGE 4 Ⅵ﹒Packaging information： ( 1 ) Configuration T Cover tape N A B 2.0±0.5 ∮C ∮C D G Embossed carrier ※Carrier tape width : D P:8 m/m 4 m/m End Start 100 Leader no component 200 m/m min. 100 100 100 100 100 Trailer no component 400 m/m min. Components User direction of feed ( 2 ) Dimensions Unit:m/m Style A 07 - 12 178 13 - 12 330 B C D G 21±0.8 13±0.5 12 14 21±0.8 13±0.5 12 14 +0 +0 N 50 50 T -0 -0 18.4 18.4 ( 3 ) Q'TY & G.W. Per package Inner : Reel Code B、D、E C AR-001C Q'TY (pcs) Outer : Carton G.W. (gw) Style Q'TY (pcs) G.W. (Kg) Size (cm) 500 350 07 - 12 20,000 10.5 42 x 41 x 24 2,000 1300 13 - 12 16,000 13.0 38 x 37 x 22 SPECIFICATION FOR APPROVAL REF. : ABC'S DWG NO. PROD. SMD Power Inductor NAME REV. SQ0703□□□□L□-□□□ 20140610-C PAGE 5 Ⅶ ﹒Reliability test： Item 1.High Temperature Exposure Reference documents MIL-STD-202 Method 108 Test Condition 1.Temperature: 125℃ 2.Time:96 hours. 1.Temperature: -40℃ ~ 125℃ 2.Temperature Cycling JESD22 Method JA-104 2.Number of cycle:96 cycle 3.Dwell time:30 minutes 3.Biased Humidity Test MIL-STD-202 Method 103 1.Temperature: 85±5 ℃ 2.Time:96 Hours 3.Humidity: 85±5% RH. 1.Temperature: 125℃ 2.Time:96 hours. 3.Apply rated current. 4.Operational Life MIL-PRF-27 5.External Visual MIL-STD-883 Method 2009 constructions, marking and 6.Physical Dimensions JESD22 Method JB-100 Inspect product workmanship. Test Specification 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 1.No pollution on the surface of products. 2.Clear marking. 3.No crack. Verify physical dimensions to the applicable product detail specification. Per product specification standard 7.Resistance to solvents MIL-STD-202 Method 215 Immerse into solvent for 3±0.5 minutes & brush 10 times for 3 cycles. 1.No body change in apperarance. 2.No marking blurred. 3.Inductance shall not change more than ±10%. 8.Vibration Test MIL-STD-202 Method 204 1.Frequency and Amplitued : 10-2000-10 Hz, 1.5 mm. 2.Direction:X, Y, Z 3.Test duration:2 hours for each direction, 6 hours in total. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 9.Resistance To Soldering Heat Test MIL-STD-202 Method 210 1.Highest temperature： 260±5℃. 2.Time（temp.≧ 217℃）：60~150 Second. 3.IR reflow times：3 times. 10.Rated current MIL-STD-202 Method 330 11.Temperature rise MIL-PRF-27 12.Over load MIL-PRF-27 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. Apply rated current for 5 second. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. Apply rated current for 10 minutes. 2.Inductance shall not change more than ±10%. 1.No mechanical and electrical damage. Apply double as rated current for 5 minutes. (It's not application to some special design) 2.Inductance shall not change more than ±10%. 13.Solderability Test J-STD-002 1.Baking in pre-testing： 155±5℃ / 16Hours±30 min. 2.Peak temperature：240±5℃ 3.Time（temp.≧217℃）：60~150 second. 4.IR reflow times：1 times. 14.Electrical Characteriazation User Spec. 1.Operating temperature：-40℃~125℃ 2.Room temperature：25℃. 15.Withstanding Voltage Test MIL-STD-202 Method 201 1.DC:500V 2.Time:1minutes 16.Drop JESD22-B111 Packaged & Drop down from 1m.In 1 angle 1ridges & 2 surfaces orientation. 17.Terminal Strength Test JIS-C-6429 1.Apply push force to samples mounted on PCB. 2.Force of 1.8 kg for 60±1 seconds. AR-001C The terminal shall be at least 95% covered with fresh solder. 1.No mechanical and electrical damage. 2.Inductance shall not change more than ±10%. 1.During the test no breakdown. 2.The characteristic is normal after test. 1.No case deformation or change in appearance. 2.Inductance shall not change more than ±10%. After test, inductors shall be no mechanical damage.