celduc® r e l a i S/INT/XKLD31006/A/13/01/09 s PRELIMINARY Page 1/5 UK MOSFET BASED DC SOLID STATE RELAY XKLD31006 u For DIN RAIL mounting u Latest MOSFET technology generation. u Ultra low voltage drop. u Built-in overvoltage protection u Control display LED (green) u Applications : è Traffic lights è Small motors, electromagnets, lights, heaters è Measurement products è … Control voltage range 10-30VDC Max output peak voltage 60V (clamp=40V) Nom. load current without heatsink 10ADC Application voltages Load current range Control input voltage range In & case / Out Insulation Connections Dimensions (WxHxD in mm) Weight 12-24-36VDC 0 to 10A 10-30VDC 2.5kV Terminal block with screws 12.2 x 76.4 x 53 30g Fig. 1 HIGH SIDE WIRING DIAGRAM (Load connected to “-“) LOW SIDE WIRING DIAGRAM (Load connected to “+”) Fig. 2 D2 selection : VRRM > Uep, IFav > Ie, trr<1µs Red paths should be as short as possible! Fig. 3 Proud to serve you Data given at Tambient=25°C and subject to modification without previous notice D2 selection : VRRM > Uep, IFav > Ie, trr<1µs Red paths should be as short as possible! INTERNAL DIAGRAM celduc ® r e l a i s celduc® r e l a i S/INT/XKLD31006/A/13/01/09 s PRELIMINARY Page 2/5 UK INPUT CIRCUIT CONTROL INPUT CHARACTERISTICS CHARACTERISTIC LABEL VALUE INFO. Nominal control voltage Ucnom 12-24VDC Nominal control current Icnom 9-20mADC Control voltage range Uc 10 – 30VDC Current consumption Ic 7-26mADC Ucoffmax 1VDC -Ucmax 30VDC Rin 1000Ω Releasing voltage Max. reverse voltage Input impedance See fig. 5 See fig. 5 POWER OUTPUT CHARACTERISTICS CHARACTERISTIC Mains Nominal voltage Mains voltage range VALUE INFO. Uenom 12-24-36VDC Ue 10-40VDC Uep 60V Overvoltage protection D1 Pulse = 600W 1.2/50µs Permanent = 0.5W Reverse voltage drop (internal diode) -Ue 0.82VDC @Ie=10A @Uc=0 Ie 10A See fig. 7 for limits Non-repetitive peak overload current Iepeak 100A @10ms See fig. 8 Min. load current Iemin 0.1mA Ielk 0.1mADC Non-repetitive peak voltage Maximum nominal currents POWER CIRCUIT LABEL Max. leakage current Max. on-state resistance RDSon 14mΩ @Tj=25°C @Uep @Tjmax 22.4mΩ @Tj=125°C @Iemax Typ. output capacitance Cout 360pF @1MHz @VDS=25V @Uc=0 Junction/case thermal resistance per power element Rthjc 1K/W Total = 1 power elements Relay/ambient thermal resistance vertically mounted Rthra 22K/W @∆Tra=60°C Relay thermal time constant Tthra 2min @∆Tra=60°C Control inputs/power outputs insulation voltage Uimp 2.5kV Inputs/case insulation voltage Uimp 2.5kV Outputs/case insulation voltage Uimp 2.5kV Isolation resistance Rio 1GΩ Isolation capacitance Cio <8pF Maximum junction temperature Storage ambient temperature Operating ambient temperature Max. case temperature Tjmax 175°C Tstg -40->+100°C Tamb -25->+90°C Tc 100°C See fig. 7 celduc® r e l a i S/INT/XKLD31006/A/13/01/09 s PRELIMINARY Page 3/5 UK TIME CHARACTERISTICS TIME CHARACT. Fig. 4 TIME DIAGRAMS CHARACTERISTIC LABEL VALUE Turn on time ton 1µs Turn on delay tdon 10µs Turn off time toff 10µs Turn off delay tdoff 150µs F(on-off) 1 to 700Hz depending on the circuit configuration : please consult us Max. On-Off frequency INFO. GENERAL INFORMATION Green MISC. Display LED (control) UL94V0 Housing Mounting DIN RAIL Noise level No audible noise 30g Weight E.M.C. EMISSION E.M.C. IMMUNITY GENERAL STANDARDS IEC60947-1 Standards Protection level IP00 Protection against direct touch None Yes CE marking Pending UL, cULUS and VDE approvals TYPE OF TEST STANDARD LEVEL EFFECT E.S.D. (Electrostatic discharges) EN61000-4-2 Pending ? Radiated electromagnetic fields EN61000-4-3 Pending ? Fast transients bursts EN61000-4-4 Pending No effect Electric chocks EN61000-4-5 Pending ? Voltage drop EN61000-4-11 - Radiated and conducted disturbances NFEN55011 Pending celduc® r e l a i S/INT/XKLD31006/A/13/01/09 s PRELIMINARY Page 4/5 UK CHARACTERISTIC CURVES Fig. 5 INPUT CHARACTERISTIC Fig. 6 Ic (mADC) 30 ON-STATE VOLTAGE DROP VS TEMPERATURE RDSon 35 (mO) 30 25 25 20 20 @25°C 15 15 10 10 5 5 0 0 0 5 10 15 Fig. 7 20 -50 25 30 Uc (VDC) 0 50 100 150 Junction Temperature (°C) LOAD CURRENT LIMIT VS TEMPERATURE Permanent current Ie (ADC) 40 Power dissipated (W) WF042000 35.9 WF032000 35 27.5 30 20.2 25 14 20 8.96 15 5.04 10 2.24 0.56 5 No heatsink SKH Option 0 0 10 20 30 40 50 60 70 80 90 100 0 110 Ambient temperature (°C) Fig. 8 CURRENT OVERLOAD CHARACTERISTIC (ITSM) Not available celduc® r e l a i S/INT/XKLD31006/A/13/01/09 s PRELIMINARY Page 5/5 UK DIMENSIONS AND ACCESSORIES DIMENSIONS 76,4±0,4 Fig. 9 ±0,4 29 ±0,2 12,2 53 ±0,4 Fig. 10 ACCESSORIES celduc® r e l a i s www.celduc.com 5, rue Ampère B.P. 30004 42290 SORBIERS - France Phone : 33 (0) 4 77 53 90 21 Fax : 33 (0) 4 77 53 85 51 Email : [email protected]