MCU Built on Power Architecture® Technology Qorivva MPC5668G Single-Chip Automotive Gateway Dual-core MCU with on-chip FlexRay™, Ethernet and media local bus Target Applications Overview • Automotive gateways Electronic content in vehicles keeps increasing, while a number of different communication protocols, including consumer protocols making their way into the automotive market, keep these electronic components working together. The 32-bit Qorivva MPC5668G MCU, built on dual-core Power Architecture® technology connects, at one single point, all the possible communication protocols you can find in a car. The dual-core architecture provides the performance throughput you need to maintain real-time operation backed up by strong third-party ecosystem support. • Advanced central body controllers MPC5668G QorivvaBlock MPC5668G Block Diagram Diagram System Integration SWT VREG 4-40M XTAL Osc. 16M IRC PIT 8-ch., 32-bit Int. Control JTAG Power Architecture® e200z6 Core Nexus Class 3 FPU/SPE VLE 32-ch. eDMA Nexus Class 2+ e200z0 Core MMU VLE 32 KB Cache FEC Crossbar Switch 2 MB Flash 80 KB SRAM (ECC) 512 KB SRAM (ECC) I/O Bridge Data Flash Standby RAM Boot Assist Module (BAM) Crossbar Slaves Communications I/O System eMIOS Lite 24-ch. 6 CAN 3 SPI 4 eSCI 4 I2C 36-ch. ADC Product Features res Device Qorivva MPC5668G Core platform Power e200z6+e200z0 Max speed 116 MHz Cache 32 KB Program flash 2 MB SRAM 592 KB DMA 32-ch. EEPROM Emulated in program flash (16 KB sectors) eSCI 4 DSPI 3 CAN 6 I 2C 4 FlexRay support Dual channel MediaLB support MLB DIM controller Ethernet support Fast Ethernet controller (FEC) Debug support JTAG interface, Nexus 3 on e200z6, Nexus 2+ on e200z0 Development Tools Support Development Tools Software (RTOS, Communication Stacks) Other Evaluation kit including CodeWarrior (build only) AUTOSAR OS and MCAL drivers, example code RAppID initialization tool MULTI development environment TimeMachine Workbench compiler and IDE LAUTERBACH Trace32 debug and trace solutions IC3000 debug and trace solutions Nexus wiggler and debugger Tresos, FlexRay and Ethernet stacks Timed I/Os eMIOS 24-ch., 16-bit Internal timers PIT 8-ch., 32-bit Maximum I/O 155 ADC 36-ch., 10-bit Voltage 5 or 3.3 V Temp. range –40 °C to +105 °C Package options 208 MAPBGA Part Number Description Low-power support Multiple oscillators, automatic periodic interrupt and real-time clock SPC5668GK0VMG 208 MAPBGA automotive qualified, –40 °C to +105 °C, 116 MHz PPC5668GF1AVMJ 256 MAPBGA prototypes, –40 °C to +105 °C, 116 MHz (for development purposes only, not available for production) MPC5668GKIT Evaluation kit, including a board, software support CD, P&E JTAG wiggler, documentation. This comes with free permanent CodeWarrior compiler/debugger license limited to 128 KB code. MPC5668GNEXUSADAP 256 MAPBGA emulation adapter board for full Nexus access without losing GPIOs needed by the application. FlexRay, CAN and LIN stacks Ordering Information Key Benefits • Supports all automotive communication protocols currently available • Optimized for communication data management: 592 KB embedded RAM, split into two blocks to allow concurrent accesses by bus masters Additional e200z0 core to pre-process incoming communication data from high-speed networks, such as FlexRay™ and Ethernet • Single-chip SoC solution for best cost and 208 MAPBGA 17 mm x 17 mm EMC performance For more information about Qorivva products, visit freescale.com/Qorivva Freescale, the Freescale logo, CodeWarrior and Qorivva are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org. All other product or service names are the property of their respective owners. © 2005, 2010, 2012 Freescale Semiconductor, Inc. Document Number: MPC5668GFS REV 4