Features: CW 0713 ASOV5S3E 10.00M • Variable Frequency, VCOCXO • Meets Stratum 3E Requirements • Frequency Stability ±10ppb • 5.0V Operation • HCMOS Output • Surface Mount Package • RoHS 5/6 Compliant Absolute Maximum Ratings Minimum -40 -0.5 Nominal - - Maximum 85 7.0 Operating Specifications Minimum Center Frequency (Fo) - Frequency Calibration -0.2 Frequency vs. Temperature Stability -10 Aging: Daily -1 Aging: First Year -30 Aging: Short Term (1 Sec.) - Aging: Long Term (20 Years) - Operating Temperature Range 0 Supply Voltage (Vcc) 4.75 Frequency vs. Voltage Stability (±1%) -0.5 Frequency vs. Load Stability (±20%) -0.5 Power Consumption: Turn On - Power Consumption: Steady-State - Start-Up Time - Warm Up -100 2G Tip-over - TDEV at 300 seconds - TDEV at 40 seconds - Parameter SHEET Parameter D ATA ASOV5S3E DESCRIPTION Storage Temperature Supply Voltage (Vcc) UCT TABLE 1.0 NOTE TABLE 2.0 NOTE 1 The Connor-Winfield ASOV5S3E is a 5V Surface Mount Voltage Controlled Oven Controlled Crystal Oscillator (VCOCXO) with an HCMOS output. The ASOV5S3E is designed for Stratum 3E applications requiring low jitter and tight frequency stability. FEATURES The Connor-Winfield ASOV5S3E is a 5V Surface Mount Voltage Controlled Oven Controlled Crystal Oscillator (VCOCXO) with an HCMOS output. The ASOV5S3E is designed for Stratum 3E applications requiring low jitter and tight frequency stability. D OSCILLATORS UNITS °C Vdc UNITS 2 3 4 5 6 6 7 8 Description: Parameter OS VCOCXO MHz ppm ppb ppb/day ppb RMS ppb °C Vdc IMUM 85 7 0.2 10 1 30 00 70 .25 ppb ppb W W mS ppb ppb/G nS nS IMUM 0.5 0.5 .75 50 00 00 5 5 1 US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 VARIABLE FREQUENCY, VCOCXO www.conwin.com NOTE DESIGNED TO MEET STRATUM 3E REQUIREMENTS FREQUENCY STABILITY ±10ppb 5.0V OPERATION HCMOS OUTPUT Fax: 630- 851- 5040 TABLE 3.0 9 TABLE 4.0 NOTE 10 SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS 5/6 COMPLIANT Phone: 630- 851- 4722 UNITS UNITS pF Vdc Vdc % nS dBc dBc/Hz dBc/Hz dBc/Hz dBc/Hz Aurora, Illinois 60505 IMUM dBc/Hz Vdc ppm Ohm IMUM 18 0.2 55 5 80 90 115 130 135 4.5 1.0 - 140 2111 Comprehensive Drive ASOV5S3E HCMOS VCOCXO STRATUM 3E Nominal 10 - 12.8 - - - - 5.00E-11 - - 5.00 - - - - - - - - - Maximum Control Voltage: (Pin 1) Vc 0.5 Deviation @ 25°C referenced to Fo ±0.3 Input Impedance: (Pin 1) 50K Nominal 2.5 - - Notes Units Notes °C Vdc - MHz 0.2 ppm 10 ppb 1 ppb/day 30 ppb - RMS 300 ppb 70 °C 5.25 Vdc 0.5 ppb 0.5 ppb 2.75 W 1.50 500 mS 100 ppb 5 ppb/G 5 nS 1 Input Characteristics Minimum Units Maximum 4.5 ±1.0 - Units Vdc ppm Ohms 1 2 3 4 5 6 7 8 Notes 9 HCMOS Output Characteristics Parameter Minimum Load 12 Voltage (High) (Voh) Vcc-0.2V (Low) (Vol) - Duty Cycle at 50% of Vcc 45 Rise /Fall Time 10% to 90% - Spurious Output - SSB Phase Noise at 1Hz offset - SSB Phase Noise at 10Hz offset - SSB Phase Noise at 100Hz offset - SSB Phase Noise at 1KHz offset - SSB Phase Noise at 10KHz offset - Off Time Bulletin Page Revision Date Cx031 1 of 2 03 20 Mar 2014 Nominal 15 - - 50 - - - - - - - Maximum Restabilization Time Restablization Time Units Notes Notes 18 pF - Vdc 0.2 55 % 5 nS -80 dBc -90 -115 -130 dBc/Hz -135 -140 < 1 Hour < 2 Hours < 6 Hour < 12 Hours < 24 Hour < 48 Hours 1 to 16 Days 48 Hours + ¼ Off Time > 16 Days < 6 Days 10 11 11 11 11 11 Aging: Long Term (20 Years) Operating Temperature Range Supply Voltage (Vcc) Frequency vs. Voltage Stability (+/ -1%) Frequency vs. Load Stability (+/-20%) Power Consumption: Turn On Power Consumption: Steady-State Start-Up Time Warm Up 2G Tip-over TDEV at 300 seconds TDEV at 40 seconds INPUT CHARACTERISTICS PARAMETER 0 4.75 5.00 300 70 5.25 ppb °C Vdc -0.5 -0.5 - - -100 - - 0.5 0.5 2.75 1. 50 500 100 5 5 1 ppb ppb W W mS ppb ppb/G nS nS THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. MINIMUM NOMINAL MAXIMUM UNITS FAX (630) 851-5040. Non-hermetic of substrateVdc with PHONE package (630) Vc851-4722.consisting 0.5 2.5an FR4 4.5 WWW.CONWIN.COM Package Characteristics Package: Control Voltage (Pin 1) Deviation @ 25°C referenced to Fo Input Impedance (Pin 1) ASOV5S3E is designed for Stratum 3E applications requiring low jitter and tight frequency stability. 2111 Comprehensive Drive 6 6 7 8 Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 FEATURES TABLE 3.0 NOTE www.conwin.com VARIABLE FREQUENCY, VCOCXO Pin Connections grounded metalDESIGNED cover. TO MEET STRATUM 3E 9 1 Control Voltage REQUIREMENTS ±0.3 ±1.0 ppm 50K Ohm 2 Ground Environmental Characteristics FREQUENCY STABILITY 6 N/C ±10ppb Shock: 100G's, 6mS, halfsine per MIL-STD-202F, Method 213B, Test Condition C HCMOS OUTPUT CHARACTERISTICS TABLE 4.0 7 Ground Vibration:0.06" D.A or 10G peak 10 to 500 Hz, per MIL-STD-202F, Method 204D, Test Condition5.0V A OPERATION PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Vcc PACKAG E CHARACTERISTICS Pin 8 Connections TABLE 6.0 10 LOAD 12package 15 Process Recommendations Package Non-hermetic consisting of an 18 FR4 substratepFwith grounded metal HCMOS OUTPUT 9 Vcc cover.Voltage (High) (Voh) Vcc-0.2V Vdc Soldering Process See solder profile Pin Function 10 Ground ENVIRONMNETAL CHARACTERISTICS TABLE 7.0 (Low) (Vol) 0.2 Vdc SURFACE MOUNTControl PACKAGE Wash Ultrasonic cleaning is not recommended. 1 Voltage 11 Ground 100G’s, 6mS, MIL-STD-202F, Duty Shock Cycle at 50% of Vcc 45 halfsine per50 55 Method 213B, % Test Condition C Vibration 0.06” D.A. or 10G peak 10 to 500 Hz, per MIL-STD-202F, Method 204D, 12 N/C 2 Ground Notes: TAPE AND REEL PACKAGING Rise / Fall Time 10% to 90% - Test condition 5 A nS 1.Labels will include the calibration frequency at the time of ship. 13 Ground 6 N/C Spurious Output -80 dBc PROCESS RECOMMENDATIONS TABLE 8.0 2.Initial calibration @ 25°C at the time of shipm,ent, Vc=2.5Vdc. RoHS 5/6 14 Output SSB Soldering Phase Noise at 1Hz offset - See solder-90 dBc/Hz 7 COMPLIANT Ground Process profile 3 Overall frequency stability, 0 to 70°C not recommended. SSB Wash Phase Noise at 10Hz offset - Ultrasonic- cleaning is-115 dBc/Hz 15 Ground 8 Vcc 4 After ten days of continuous operation. SSB Phase Noise at 100Hz offset -130 dBc/Hz 16 N/C Vcc 9 Notes: 5 Allen Variance: 1 second, 100 average. SSB Phase Noise at 1KHz offset dBc/Hz 1) =Labels 6 Vcc 5.0Vdc.will include the calibration frequency- at the time -of ship. -135 10 Ground SSB Phase atcalibration 10KHz offset - before oscillator -140 7 From Vcc=90% of final value. No more atVc=2.5Vdc. start-up hasdBc/Hz started. ORDERING INFORMATION 2) Noise Initial @ 25C at thethan time16oftransitions shipment, 11 Ground 8Measured @ 0°C within 5stability, minutes,0 referenced 3) Overall frequency to 70C. one hour after turn-on. RESTABILIZATION TIME TABLE 5.0 Ordering Information 12 N/C 9 Positive Slope 4) After ten days of continuous operation. Off Time Restabilization Time NOTE 5) Allen Variance: 1 second, 100 average. 13 Ground HCMOS load. < 10 1 Hour < 2 Hours 11 ASOV5S3E -Output 10.00MHz 6) a Vcc 5.0Vdc. For given=off time, the time required to meet daily aging, short-term stability and TDEV requirements 11 < 11 6 Hours < 12 Hours 14 7) From Vcc=90% of final value. No more than 16 transitions at star t-up before oscillator has < 24 Hours < 48 Hours 11 15 Ground OCXO CENTER started. 1 to 16 Days 48 Hours + ¼ Off Time 11 SERIES FREQUENCY > 16 Days < 6 Days 11 16 N/C 8) Measured @ 0C, within 5 minutes, referenced one hour after turn-on. PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS 9) Positive slope 10) HCMOS load. 11) For a given off time, the time required to meet daily aging, short -term stability and TDEV requirements. 03/28/07 Cx031 02 1 2 PAGE DATA SHEET #: OF REV: DATE: Package Layout Package Layout Dimensional Tolerance: ±.005 (.127mm) Tolerance: ± .005 (.127mm) SpecificationsDimentional subject to change without notice. Copyright 2001 Connor-Winfield all rights reserved. Suggested Suggested Pad Pad Layout Layout .270 (6.85mm) .260 (6.60mm) 10.00M ASOV5S3E CW DATE CODE 12.7 .260 (6.60mm) .270 (6.85mm) .260 (6.60mm) .360 (9.14mm) KEEP OUT AREAS (4 PLACES) Test Circuit Test Circuit SolderProfile Profile Solder Temperature 4.5V REF. SUPPLY 10 7 11 6 225°C Ramp-Up Rate 3°C/second max. from 150°C to 225°C. 225°C tp Ramp-Down Rate 6°C/second max. 183°C 150°C 100°C 12 13 14 15 2 20K POT 25°C 0 60-120s Max. 10-30s Time 60-150s Max. 360 Sec. Max. Specifications subject to change without notification. See Connor-Winfield's website for latest revision. All dimensions in inches. © Copyright The Connor-Winfield applications. Cx031 Corporation Not 02 2 life support PAGE 2 intended OF for DATA 2014 SHEET #: REV: DATE: 03/28/07 Specifications subject to change without notice. Copyright 2001 Connor-Winfield all rights reserved.