5.0V SURFACE MOUNT SINEWAVE OCVCXO 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com US Headquarters 630-851-4722: European Headquarters: +353-61-472221 Description Features Connor-Winfield model OVC5DE1BA is a 5.0V Sinewave, Oven Controlled Voltage Controlled Crystal Oscillator (OCVCXO) in a 30.48x25.4mm surface mount package. The OVC5DE1BA is designed for use in applications that meet STRATUM 3E requirements, featuring very high frequency stability, low jitter and low phase noise. Model: OVC5DE1BA OCVCXO 5.0V Operation 30.48 x 25.4mm Surface Mount Package Meets STRATUM 3E Requirements Frequency Stability: +/-10ppb Temperature Range: 0 to 70°C Sinewave Output Logic Low Phase Noise RoHS 5/6 Compliant Specifications Absolute Maximum Ratings Parameter Units Storage Temperature Supply Voltage (Vcc) Minimum Nominal Maximum Units -40 - 85 °C -0.5 - 7 Vdc Note Operating Specifications Parameter Center Frequency (Fo) Minimum Nominal Maximum 10.0, 12.8, 13.0 or 26.0 Frequency Calibration -0.2 Frequency vs. Temperature Stability -10 Aging: Daily -1 Aging: First Year Aging: Short Term (1Sec.) Aging: Long Term (20 Years) Operating Temperature Range Units MHz 0.2 ppm - 10 ppb 3 - 1 ppb/day 4 -30 - 30 ppb - 5.00E-11 - RMS - - 300 ppb 0 - 70 °C 4.75 5.00 5.25 Vdc Frequency vs. Voltage Stability (+/-1%) -0.5 - 0.5 ppb Frequency vs. Load Stability (+/-20%) -0.5 - 0.5 ppb Supply Voltage (Vcc) Note 1 2 5 Power Consumption: Turn On - - 3.25 W Power Consumption: Steady-State - - 1. 50 W 6 500 ms 7 8 Start-Up Time Warm Up 2G Tip-over -100 - 100 ppb - - 5 ppb/G TDEV at 300 seconds - - 5 ns TDEV at 40 seconds - - 1 ns Minimum Nominal Maximum Units 0.5 2.5 4.5 Vdc Deviation @ 25°C referenced to Fo ±0.3 - ±1.0 ppm Input Impedance (Pad 1) 50K - - Ohm 6 Input Characteristics Parameter Control Voltage (Pad 1) Vc Note 9 Sinewave Output Characteristics Parameter Minimum Nominal Maximum Units LOAD 45 50 55 Ohms Output Power 0 3 - dBm Spurious Output SSB Phase Noise at 1Hz offset - -80 dBc - dBc/Hz -85 SSB Phase Noise at 10Hz offset - -110 - dBc/Hz SSB Phase Noise at 100Hz offset - -135 - dBc/Hz SSB Phase Noise at 1KHz offset - -145 - dBc/Hz SSB Phase Noise at 10KHz offset - -150 - dBc/Hz Note Restabilization Time Bulletin Cx152 Page 1 of 2 Revision Date 01 Off Time < 1 Hour < 6 Hours < 24 Hours 1 to 16 Days > 16 Days Restabilization Time < 2 Hours < 12 Hours < 48 Hours 48 Hours + ¼ Off Time < 6 Days 20 Aug 2008 Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation Note 10 10 10 10 10 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Pad Connections Notes: Labels will include the calibration frequency at the time of ship. Initial calibration @ 25 C at the time of shipment, Vc=2.5Vdc. Overall frequency stability referenced to measurement at 25 C. After ten days of continuous operation. Allen Variance: 1 second, 100 average. Vcc = 5.0Vdc. From Vcc=90% of final value. No more than 16 transitions at start-up before oscillator has started. 8) Measured @ 0 C, within 5 minutes, referenced one hour after turn-on. 9) Positive slope 10) For a given off time, the time required to meet daily aging, short-term stability and TDEV requirements. Pad 1 2 6 7 8 9 10 11 12 13 14 15 16 1) 2) 3) 4) 5) 6) 7) Package Characteristics Package Solder Profile Temperature Non-hermetic package consisting of an FR4 substrate with grounded metal cover. Environmental Characteristics Shock 100G’s, 6mS, halfsine per MIL-STD-202F, Method 213B, Test Condition C 0.06” D.A. or 10G peak 10 to 500 Hz, per MIL-STD-202F, Method 204D, Test condition A Vibration Process Recommendations Soldering Process Wash Function Control Voltage (Vc) Ground N/C Ground Vcc Vcc Ground Ground N/C Ground Output Ground N/C 225°C Ramp-Up Rate 3°C/second max. from 150°C to 225°C. 225°C tp Ramp-Down Rate 6°C/second max. 183°C 150°C 100°C 25°C 0 Time 60-120s Max. RoHS 5/6 compliant, see solder profile. Ultrasonic cleaning is not recommended. 10-30s 60-150s Max. 360 Sec. Max. Package Outline Suggested Pad Layout 13.0MHz OVC5DE1BA CW DATE CODE 12.7 .310 (7.87mm) .110 (2.75mm) .210 (5.33mm) Pin 1 Dimensional Tolerance: ±.005 (.127mm) .210 (5.33mm) .110 (2.75mm) KEEP OUT AREAS (3 PLACES) Test Circuit Ordering Information OVC5DE1BA - 013.0M 4.5V REF. SUPPLY 10 7 11 6 OCXO SERIES CENTER FREQUENCY 12 13 14 15 2 20K POT 50 Ohm US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Bulletin Cx152 Page 2 of 2 Revision Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation Date 01 20 Aug 2008