14 Pin DIP ACMOS Clock Oscillator Series Features: Description: 2111 Comprehensive Drive 2111 Comprehensive Drive Aurora, Illinois 60505 Aurora, Illinois 60505 Phone: 630- 851- 4722 Phone: 630- 851- 4722 Fax: 630- 851- 5040 Fax: 630- 851- 5040 www.conwin.com www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 The Connor-Winfield's AC6xG series are 14 Pin DIP, 5.0V ACMOS Output logic, fixed frequency Crystal Oscillator (XO) designed for applications requiring high frequency precision clock over the industrial temperature range and has a CMOS / TTL compatible output. 5.0 Vdc Operation Frequency Stability: AC61 - ± 25 ppm AC62 - ± 50 ppm AC63 - ± 100 ppm AC64 - ± 20 ppm Temperature Range: -40 to 85°C ACMOS Output Logic 14 Pin DIP Through Hole Package RoHS 5/6 Compliant CW 1149 AC 150 M 61 HZ Absolute Maximum Ratings Parameter Minimum Storage Temperature Supply Voltage (Vcc) -55 -0.5 Nominal - - Maximum 125 7.0 Units °C Vdc Model Specifications Model AC61 Notes Notes Frequency Tolerance -25 - 25 ppm 1 Frequency Tolerance -50 - 50 ppm 1 Frequency Tolerance -100 - 100 ppm 1 Frequency Tolerance -20 - 20 ppm 1 Model AC62 Model AC63 Model AC64 Operating Specifications Parameter Minimum Frequency Range(Fo) 10.0 Operating Temp Range 0 Supply Voltage (Vcc) 4.75 Supply Current (Icc) - Period Jitter - Integrated Phase Jitter - SSB Phase Noise at 10Hz offset - SSB Phase Noise at 100Hz offset - SSB Phase Noise at 1KHz offset - SSB Phase Noise at 10KHz offset - SSB Phase Noise at 100KHz offset - SSB Phase Noise at 1MHz offset - Start Up Time - Nominal - - 5.0 - 3 0.3 -40 -85 -120 -140 -145 -145 - Maximum 150 70 5.25 100 5 1.0 - - - - - - 10 Units Notes Units Notes MHz °C Vdc mA ps rms ps rms dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ms ACMOS Output Characteristics Parameter Load - Voltage High (Voh) Low (Vol) Current High (loh) Low (lol) Duty Cycle at 50% of Vcc Rise / Fall Time: Minimum - 4.4 - - 24 45 - Nominal 50 - - - - 50 - Maximum - - 0.44 -24 - 55 1 pF V V mA mA % ns 2 Package Characteristics Package Bulletin Page Revision Date AC064 1 of 2 02 08 Dec 2011 Hermetically sealed 14 Pin DIP metal package with case ground. Notes: 1. Includes calibration @ 25°C, frequency stability vs. change in temperature, supply voltage and load variations, shock and vibration and 10 years aging. 2. Measured from 0.5 to 2.4 V. Warning: Do not insert oscillator into a hot circuit. Failure to comply will damage the oscillator. Specifications subject to change without notice. All dimensions in inches. © Copyright 2011 The Connor-Winfield Corporation 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Environmental Characteristics Pin Connections Vibration: Vibration per Mil Std 883E Method 2007.3 Test Condition A Shock: Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. Solderability Solderability per Mil Std 883E Method 2003 Soldering Process; RoHS 5/6 compliant. See soldering profile on page 2. 1: N/C 7: Ground 8: Output 14: Supply Voltage (Vcc) Test Circuit Output Waveform Voh 50pF 0.5 V N/C Temperature 260°C 50% 2.4 V 5.0V Vol 260°C 220°C 180°C 150°C 120°C 0 10 s Up to 120 s 60 to 90 s Typical Typical Meets IPC/JEDEC J-STD-020C Solder Profile Package Layout .260 MAX (6.60mm) Temperature 225°C Ramp-Up Rate 3°C/second max. from 150°C to 225°C. 225°C tp Ramp-Down Rate 6°C/second max. 183°C 150°C 100°C 25°C CW 1149 AC61 150 MHZ 0 Time 60-120s Max. 10-30s 60-150s Max. 360 Sec. Max. Dimensional Tolerance: ±.005 (.127mm) ±.02 (.508mm) Ordering Information AC Type: Clock Oscillator ACMOS, 5.0 Vdc 14 Pin DIP Package 6 Temperature Range 6 = 0 to 70°C 1 Frequency Stability 1 = ±25 ppm 2 = ±50 ppm 3 = ±100 ppm 4 = ±20 ppm 150.0M Output Frequency - Frequency Format -xxx.xM Min. * -xxx.xxxxxxM Max.* * Amount of numbers after the decimal point. M = MHz Bulletin Example: AC61-150.0M = 14 Pin DIP, ACMOS, Clock, 5.0Vdc, -40 to 85°C, ±25ppm, Output Frequency 150 MHz To order an AC61 with an output frequency of: 12.8 MHz = AC61-012.8M 44.736 MHz = AC61-044.736M 50. MHz = AC61-050.0M Specifications subject to change without notice. All dimensions in inches. © Copyright 2011 The Connor-Winfield Corporation Page Revision Date AC064 2 of 2 02 08 Dec 2010