High Frequency 9x14mm Surface Mount LVPECL Clock Description 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com US Headquarters 630-851-4722: European Headquarters: +353-61-472221 Features: Model: FPLD54PTE 0828 FPLD54 PTE The Connor-Winfield 1.0 GH Z FPLD54PTE is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±20ppm overall frequency stability. Operating at 3.3V supply voltage, the FPLD54PTE provides LVPECL Differential Outputs with Enable/Disable function. Frequency Range: 0.9 to 1.1 GHz 3.3V Operation LVPECL Outputs Frequency Stability: +/-20ppm Temperature Range: 0 to 70°C Low Jitter: <1.0ps Surface Mount Package Tape and Reel Packaging RoHS Compliant / Lead Free Specifications Absolute Maximum Ratings Parameter Units Storage Temperature Minimum Nominal Maximum Units -55 - 125 °C Supply Voltage (Vcc) -0.5 - 4.6 Vdc Input Voltage (Vcc) -0.5 - Vcc+0.5 Vdc Minimum Nominal Maximum Units 0.9 1.0 1.1 GHz -20 - 20 ppm 0 - 70 °C Vdc Note Operating Specifications Parameter Center Frequency (Fo) Total Frequency Tolerance Operating Temperature Range Supply Voltage (Vcc) 3.135 3.3 3.465 Supply Current (Icc) - 60 90 mA - - 20 ps rms Period Jitter Phase Jitter (BW=12kHz to 20MHz) - - 0.6 ps rms SSB Phase Noise at 10Hz offset - -50 - dBc/Hz SSB Phase Noise at 100Hz offset - -80 - dBc/Hz SSB Phase Noise at 1KHz offset - -100 - dBc/Hz SSB Phase Noise at 10KHz offset - -105 - dBc/Hz SSB Phase Noise at 100KHz offset - -110 - dBc/Hz Note 1 Input Characteristics Parameter Minimum Nominal Maximum Units Note Disable Input Voltage (Low) (Vil) - 0.8 Vdc 2 Enable Input Voltage (High) (Vih) 2.0 - - Vdc 2 Minimum Nominal Maximum Units Note - - 50 Ohms 3 2.12 - - Vdc Vdc LVPECL Output Characteristics Parameter LOAD Voltage (High) (Voh) (Low) (Vol) - - 1.99 0.405 - 1.076 V 45 50 55 % 4 Rise / Fall Time 20% to 80% - - 0.4 ns 5 Start up Time - - 5 ms Output Voltage (peak –peak level) Duty Cycle Package Characteristics Package Non-Hermetical package consisting of an FR4 substrate with grounded metal cover. Process Recommendations Bulletin Ec261 Page 1 of 2 Revision Date 00 03 Jun 2008 Soldering Process RoHS compliant, lead free. See solder profile on page 2. Wash Ultrasonic cleaning is not recommended. Notes 1) Includes calibration @ 25°C, frequency stability vs. temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1. 3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 50% of output swing. 5) Rise and fall times measured 20% to 80% of the total output voltage swing. Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Suggested Pad Layout Package Outline 0.520 (13.21mm) 0.210 Max. (5.33mm) 0828 FPLD54PTE 1.0GHZ 0.355 (9.02mm) 3 4 2 5 1 6 Dimensional Tolerance: ±.005 (.127mm) Pad Connections Enable / Disable Function Enable / Disable Function (Pad 1) High or Open Low Pad 1 2 3 4 5 6 Output Enable Disable (High Impedance) Connection Enable / Disable N/C Ground Q Output Q Output Vcc Solder Profile Test Circuit Temperature 260°C 260°C 220°C 180°C 150°C 120°C 2 E/D N/C 0 Tape and Reel Information Time 120 S Max. Vcc = Vcc2 = 3.3Vdc 10 S 60 S Max. 360 Sec. Max. Ordering Information FPLD54PTE LVPECL SERIES - 001.0G CENTER FREQUENCY US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Bulletin EC261 Page 2 of 2 Revision Date Specifications subject to change without notice. All dimensions in inches. © Copyright 2007 The Connor-Winfield Corporation 00 03 Jun 2008