14 Pin DIP Precision OCXO / VCOCXO BOC1 Series 2111 Comprehensive Drive Description: Features: Connor-Winfield’s high stability BOC1 series OCXO / VCOCXO are exceptionally precise frequency standards, Aurora, Illinois 60505 excellent devices for use in cellular base stations, Phone: 630- 851- 4722 test equipment, Synchronous Ethernet and VSAT Fax: 630- 851- 5040 www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Frequencies Available: 10, 12.8, 19.44, 20, 25 or 38.88 MHz 3.3 or 5.0 Vdc Operation applications. Package: 14 Pin DIP This 14 Pin DIP OCXO / VCOCXO provides Frequency Stabilities Available: temperature stabilities in the range of ±50 ppb ±50 ppb or ±100 ppb or ±100 ppb, over the commercial, extended Temperature Ranges Available: commercial or the industrial temperature range. 0 to 70°C, -20 to 75°C or -40 to 85°C The BOC1 series is available with a CMOS CMOS Output / Low Phase Noise output along with optional Voltage Controlled Voltage Controlled Option option (VCOCXO). These oscillators provide RoHS Compliant / Lead Free outstanding phase noise characteristics that will meet the most stringent requirements. BOC1 Package Outline 0.400 Max. 0.250 Max. 0.500 (12.7mm) (10.16mm) 0.018 Diameter (0.46mm) 4 Places 1: N/C or Vc (option) 7: Ground: 8: Output 14: Supply Voltage (Vcc) 8 7 1347 BOC10503F 10.0 MHZ 0.800 (20.32mm) (6.35mm) Pin Connections 0.600 (15.24mm) 14 1 0.300 0.028 (0.71mm) (7.62mm) Side View Top View Bottom View Dimensional Tolerance: +/-0.005 (0.127mm) Ordering Information BOC 1 05 Oscillator Type Package Type Frequency Stability OCXO VCOCXO 1 =14 Pin DIP 05 = ±50 ppb 10 = ±100 ppb 0 3 F Temperature Range Supply Voltage Voltage Control Option 0 = 0 to 70°C 1 = -20 to 75°C 2 = -40 to 85°C 3 = 3.3 Vdc 5 = 5.0 Vdc F = OCXO (Fixed Freq.) V = VCOCXO (Voltage Controlled) -010.0M Output Frequency Frequency Format -xxx.xM Min.* -xxx.xxxxxxM Max* *Amount of numbers after the decimal point. M = MHz Part Number Examples: BOC10503F-010.0M = 14 Pin DIP package, ±50 ppb, 0 to 70°C, 3.3 Vdc, LVCMOS Output, OCXO, Output Frequency 10.0 MHz Bulletin Page Revision Date Cx226 1 of 4 05 22 Nov 2013 BOC11025V-020.0M = 14 Pin DIP package, ±100 ppb, -40 to 85°C, 5.0 Vdc, HCMOS Output, VCOCXO, 20.0 MHz Attention: System Designers please review Application Note AN2093: System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators. @ www.conwin.com/technologies.html Specifications subject to change without notification. See Connor-Winfield's website for latest revision. Not intended for life support applications. All dimensions in inches. © Copyright 2013 The Connor-Winfield Corporation 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Absolute Maximum Ratings Parameter Storage Temperature Supply Voltage: Control Voltage (Vc) 3.3 Vdc (Vcc) 5.0 Vdc (Vcc) Minimum -55 -0.5 -0.5 -0.5 Nominal - - - - Maximum 125 4.5 6.0 Vcc+0.5 Units °C Vdc Vdc Vdc Notes Absolute Ratings: Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only. The functional operation of the device at those or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to conditions outside the "recommended operating conditions" for any extended period of time may adversely impact device reliability and result in failures not covered by warranty. Operating Specifications Parameter Minimum Nominal Maximum Center Frequency: (Fo) 10, 12.8, 19.44, 20, 25 or 38.88 Frequency Stability vs. Change in Temperature: (See Ordering Information) Stability Code 05 -50.0 - 50.0 Stability Code 10 -100.0 - 100.0 Operating Temperature Range: (See Ordering Information) Temperature Code 0 0 - 70 Temperature Code 1 -20 - 75 Temperature Code 2 -40 - 85 Frequency Calibration: -1.0 - 1.0 Frequency Stability vs. Load -20 - 20 Frequency Stability vs. Voltage -20 - 20 Aging: Daily: -10 - 10 Aging: First Year: -300 - 300 Total Frequency Tolerance -4.6 - 4.6 Supply Voltage: (Vcc) (See Ordering Information) Supply Voltage Code 3 3.13 3.30 3.47 Supply Voltage Code 5 4.75 5.00 5.25 Power Consumption: Vcc = Nominal Voltage Turn On - - 3.0 Steady State @ 25°C - - 1.3 Phase Jitter: (BW: 12 KHz to Fo/2) - 0.5 1.0 Short Term Stability - - 1.0E-9/s Start-Up Time: - - 10 Warm Up Time (Within Specification @ 25°C) - - 60 Warm Up Time (Within Specification @ -40°C) - - 90 Units Notes ppb ppb 1 1 MHz °C °C °C ppm ppb ppb ppb/day ppb ppm 2 ±5% ±5% 3 3 4 Vdc Vdc ±5% ±5% W W ps RMS ms s s VCOCXO Input Characteristics (Optional) Parameter Control Voltage Range: Vcc = 3.3 Vdc Vcc = 5.0 Vdc Frequency Pullability: Input Impedance Linearity Minimum Nominal Maximum Units Notes 0.30 0.5 ±10.0 100K ±5 1.65 2.5 - - - 3.00 4.5 - - - V V ppm Ohms % 5 5 6 Bulletin Attention: System Designers please review Application Note AN2093: System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators. @ www.conwin.com/technologies.html Specifications subject to change without notification. See Connor-Winfield's website for latest revision. Not intended for life support applications. All dimensions in inches. © Copyright 2013 The Connor-Winfield Corporation Page Revision Date Cx226 2 of 4 05 22 Nov 2013 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com CMOS Output Characteristics Parameter Load Output Voltage: Vcc = 3.3 Vdc High (Voh) Low (Vol) Vcc = 5.0 Vdc High (Voh) Low (Vol) Duty Cycle at 50% of Vcc Rise / Fall Time: 10% to 90% Parameter @ 1 Hz offset @ 10 Hz offset @ 100 Hz offset @ 1 KHz offset @ 10 KHz offset @ 100 KHz offset Minimum Nominal Maximum Units 2.70 - 4.00 - 45 - - - - - 50 - - 0.30 - 0.50 55 6.5 V V V V % ns - 15 - Phase Noise Characteristics Typical Phase Noise for BOC10503F - 010.0M Minimum - - - - - - Nominal -67 -100 -130 -148 -154 -155 Maximum - - - - - - pF Units dBC/Hz dBC/Hz dBC/Hz dBC/Hz dBC/Hz dBC/Hz Notes Notes Package Characteristics BOC1 Series Package Package consisting of a FR4 substrate and a Ryton-R4 cover. Environmental Characteristics Shock 500 G’s 1ms, Halfsine, 3 shocks per direction, per MIL-STD 202G, Method 213B Test Condition D. Sinusoidal Vibration 0.06” D.A. or 10G’s Peak, 10 to 500 Hz, per MIL-STD-202G, Method 204D, Test Condition A. Random Vibration 5.35 G’s rms. 20 to 2000 Hz per MIL-STD-202G, Method 214,Test Condition 1A, 15 minutes each axis. Moisture 10 cycles, 95% RH, Per MIL-STD-202G, Method 112. Marking Permanency Per MIL-STD-202G, Method 215J. Solder Process Recommendations: RoHS compliant, lead free. See solder profile on page 6. In-line reflow: Refer to recommended reflow pre-heat and reflow temperatures on page 6. Package material consist of Ryton R-4 high temperature cover with FR4 substrate. Component solder is Pb free high temperature eutectic alloy with a melting point of 221°C.| In-line oven profile: We recommend using KIC profiler or similar device placing one of the thermocouples on the device to insure that the internal package temperature does not exceed 221°C. Removal of device: If for any reason the device needs to be removed from the board, use a temperature controlled repair station with profile monitoring capabilities. Following a monitored profile will insure the device is properly pre-heated prior to relow. Refer to IPC 610E for inspection guidelines. Recommended Cleaning Process: (If required) Device is non-hermetic, water resistance with four weep holes, one in each corner to allow moisture to be removed during the drying cycle. We recommend in-line warm water wash with air knife and drying capabilities. If cleaner does not have drying capability, then use hot air circulated oven. Boards should be placed in the oven vertically for good water runoff Device must be dried properly prior to use! Note: If saponifier is used make sure the device is rinsed properly to insure all residues are removed. PH of saponifier should not exceed 10. Drying Temperature: Between 85 to 100°C. Drying Time: Time will vary depending on the board size. Caution: Do not submerge the device! Bulletin Attention: System Designers please review Application Note AN2093: System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators. @ www.conwin.com/technologies.html Specifications subject to change without notification. See Connor-Winfield's website for latest revision. Not intended for life support applications. All dimensions in inches. © Copyright 2013 The Connor-Winfield Corporation Page Revision Date Cx226 3 of 4 05 22 Nov 2013 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Notes: 1Frequency stability vs. change in temperature. [±(Fmax - Fmin)/(2*Fo)]. 2Initial calibration @ 25°C. For VCOCXO control voltage must be fixed. 3After 30 days of operation 4. Inclusive of calibration @ 25°C, frequency vs. change in temperature, change in supply voltage (±5%), load change (±5%), shock and vibration and 20 years aging 5Positive slope. (Frequency increases as Vc voltage increases.) 6Referenced to Fo. Phase Noise Plot CMOS Output Waveform Typical phase noise plot for BOC10503F-010.0M RoHS Solder Profile BOC1 Series Test Circuit Temperature 260°C 260°C 220°C 180°C 150°C 120°C Top View C load 15pF 0 OCXO = N/C OCVCXO = Vc 10 s Up to 120 s 60 to 90 s Typical Typical Meets IPC/JEDEC J-STD-020C Revision History Revision A00 Advanced information data sheet released 05/19/11 Revision P01 Added page 4 information and released data sheet 07/11/11 Revision P02 Removed "-" from part number 02/27/12 Revision P03 Updated pin dimensions. 05/01/12 Revision P04 Updated start-up time. 05/17/12 Revision 05, Removed the BOC2 series, 11/22/13. Bulletin Page Attention: System Designers please review Application Note AN2093: System Design Information and Printed Circuit Board Layout Guidelines for OCXO Oscillators. @ www.conwin.com/technologies.html Specifications subject to change without notification. See Connor-Winfield's website for latest revision. Not intended for life support applications. All dimensions in inches. © Copyright 2013 The Connor-Winfield Corporation Revision Date Cx226 4 of 4 05 22 Nov 2013