.050" PIN HEADERS .050" [1.27] CENTERLINE HPH SERIES Introduction: Adam Tech .050" HPH Series Pin Headers are fine pitched, low profile, PCB mounted pin headers intended for limited space applications or where overall size is a factor. Our specially tooled insulators and contacts offer consistent high quality through automated production processes. This series offers an extensive range of single, dual and stacked versions. Each is available in thru-hole PCB or SMT mounting with choice of tin, gold or selective gold plating. Features: Single and Dual Row Stacked, Thru-Hole and SMT mounting Pin Header and Female Header sets Lightweight and Compact Hi Temp Insulator available Choice of plating ORDERING INFORMATION HPH2 Mating options: Mates with all industry standard .050" [1.27mm] pitch female headers designed for use with 0.4mm Sq. pins and Low profile receptacle Specifications: Material: Standard Hi-Temp insulator: Nylon 6T or Nylon 46, rated UL94V-0 Insulator Color: Black Contacts: Brass or Phosphor Bronze Plating: U = Gold over nickel underplate overall SG = Gold over nickel underplate on contact area, tin over copper underplate on tails. T = Tin over copper underplate overall Electrical: Operating voltage: 250V AC max. Current rating: 1 Amp max Contact resistance: 20 mΩ max. Initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V AC for 1 minute Mechanical: Mating durability: 500 Cycles min. SERIES INDICATOR HPH1= 050" Single row Pin Header HPH2= .050" Dual Row Pin Header Packaging: Anti-ESD plastic bags Approvals and Certifications: UL Recognized & CSA Certified, File no. E224053 SMT = Dual Row Surface Mount leads with Hi-Temp insulator for Hi-Temp soldering processes up to 260°C SMT-A= Single Row Surface Mount Leads Type A SMT-B= Single Row Surface Mount Leads Type B P= Optional locating peg 284 SG A MATING/ SOLDER-TAIL LENGTH A = Standard length B=Special length, customer specified, defined as tail length/total length POSITIONS 01 thru 32 (single row) 04 thru 100 (dual row) PLATING SG = Selective gold plating in contact area Tin plating on solder tails U = Gold Plated T = Tin Plated ORDERING INFORMATION 2 SERIES INDICATOR DHPH= Dual insulator .050" centerline Pin Header OPTIONS: Add designator(s) to end of part number HT = Hi-Temp insulator for Hi-Temp soldering processes up to 260°C (Add this option for thru-hole products only. All SMT products are manufactured with Hi-Temp insulators) 100 INSULATOR SIZE A=1.00mm insulator thickness single or dual row (dual row .050"x.050") B=.100" insulator thickness single or dual row (dual row .050"x.100") DHPH Temperature Rating: Operating temperature: -40°C to +105°C Soldering process temperature: 260°C B NO. OF ROWS 1=Single row .050" 2=Dual row .050"x.100" www.adam-tech.com 50 SG .XXX"/.XXX"/.XXX" (C DIM) (D DIM) (E DIM) SPECIFIED IN INCHES AS: C Dim./D Dim./E Dim. (replace D Dim. with SMT for surface mount option) PLATING SG=Selective gold plating in contact area and Tin plating on solder tails U = Gold Plated T = Tin Plated POSITIONS 01 thru 50 (single row) 04 thru 100 (dual row) .050" PIN HEADERS .050" [1.27] CENTERLINE HPH SERIES A = .050 [1.27] X No. of Positions B = .050 [1.27] X No. of Spaces PIN 1 HPH1-A .082 [2.10] Single Row Straight with 1.00mm Insulator A B .050 [1.27] PCB Layout Recommended PCB Layout .039 [1.00] B .050 [1.27] ø .026 [0.65] .118 [3.00] .090 [2.30] HPH1-A-20-UA .016 [0.40] SQ. A = .050 [1.27] X No. of Positions B = .050 [1.27] X No. of Spaces PIN 1 Single Row Straight with .100" Insulator A B .050 [1.27] Recommended PCB Layout PCB Layout HPH1-B .100 [2.54] .018 [0.46] SQ. .118 [3.00] B .050 [1.27] ø .030 [0.75] A = .050 [1.27] X No. of Positions per row B = .050 [1.27] X No. of Spaces Recommended PCB Layout .100 [2.54] PIN 2 HPH2-A .136 [3.45] Dual Row Straight with 1.00mm Insulator PIN 1 A B .050 [1.27] PCB Layout B .050 [1.27] HPH1-B-20-UA .105 [2.66] .050 [1.27] .016 [0.40] SQ. ø .026 [0.65] .039 [1.00] .050 [1.27] .118 [3.00] HPH2-A-40-UA .090 [2.30] A = .050 [1.27] X No. of Positions per row B = .050 [1.27] X No. of Spaces Recommended PCB Layout PIN 2 HPH2-B .100 [2.54] A B .050 [1.27] PCB Layout B .050 [1.27] Dual Row Straight with .100" Insulator PIN 1 .197 [5.00] ø .030 [0.75] .118 [3.00] .100 [2.54] .105 [2.66] .100 [2.54] HPH2-B-40-UA .018 [0.46] SQ. A = .050 [1.27] X No. of Positions B = .050 [1.27] X No. of Spaces Recommended PCB Layout PCB Layout B .050 [1.27] Single Row Straight SMT with 1.00mm Insulator A B .050 [1.27] .016 [0.40] SQ. .105 [2.68] .189 [4.80] .118 [3.00] .094 [2.40] A = .050 [1.27] X No. of Positions B = .050 [1.27] X No. of Spaces Recommended PCB Layout HPH1-A-20-UA-SMT .039 [1.00] .030 [.76] HPH1-B (SMT) .082 [2.10] PIN 1 Single Row Straight SMT with .100" Insulator A B .050 [1.27] B .050 [1.27] .242 [6.15] HPH1-A (SMT) .082 [2.10] PIN 1 .118 [3.00] .094 [2.40] .030 [.76] .100 [2.54] .150 [3.81] .018 [0.46] SQ. www.adam-tech.com HPH1-B-20-UA-SMT 285 .050" PIN HEADERS .050" [1.27] CENTERLINE HPH SERIES A = .050 [1.27] X No. of Positions per row B = .050 [1.27] X No. of Spaces Recommended PCB Layout ø .035 [ 0.90] PIN 2 PCB Layout B A B .050 [1.27] .094 [2.40] .248 [6.30] HPH2-A (SMT) .136 [3.45] PIN 1 .016 [0.40] SQ. .050 [1.27] .118 [3.00] .039 [1.00] HPH2-A-40-UA-SMT optional peg .050 [1.27] ø .031 [ 0.80] .027 [0.70] A = .050 [1.27] X No. of Positions per row B = .050 [1.27] X No. of Spaces Recommended PCB Layout .066 [1.68] .217 [5.50] Dwg. shown with optional peg PIN 2 HPH2-B (SMT) .100 [2.54] PIN 1 B A B .050 [1.27] .094 [2.40] .200 [5.08] .287 [7.30] .118 [3.00] .100 [2.54] .050 [1.27] .027 [0.70] A = .050 [1.27] X No. of Positions B = .050 [1.27] X No. of Spaces HPH2-B-40-UA-SMT .018 [0.46] SQ. PIN 1 Recommended PCB Layout DHPH-1 .100 [2.54] A B PCB Layout C .100 [2.54] B .050 [1.27] ø.030 [0.75] E D A = .050 [1.27] X No. of Positions per row B = .050 [1.27] X No. of Spaces Recommended PCB Layout PIN 2 .100 [2.54] PIN 1 PCB Layout B .050 [1.27] DHPH-1-20-U-.079/.079/.354 .018 [0.46] SQ. DHPH-2 A B .197 [5.00] C ø.030 [0.75] .100 [2.54] E .100 [2.54] D A = .050 [1.27] X No. of Positions B = .050 [1.27] X No. of Spaces Recommended PCB Layout .018 [0.46] SQ. .100 [2.54] PIN 1 DHPH-2-32-U-.079/.079/.354 DHPH-1 (SMT) A B B .050 [1.27] C .100 [2.54] .189 [4.80] E .121 [3.08] .150 [3.81] .030 [0.76] A = .050 [1.27] X No. of Positions per row B = .050 [1.27] X No. of Spaces Recommended PCB Layout PIN 2 DHPH-2 (SMT) .100 [2.54] PIN 1 A B B .197 [5.00] C .121 [3.08] .287 [7.30] .018 [0.46] SQ. .100 [2.54] E .050 [1.27] 286 DHPH-1-10-U-.079/SMT-A/.3.54 .018 [0.46] SQ. .150 [3.81] .027 [0.70] www.adam-tech.com DHPH-2-40-U-.079/SMT/.3.54 .050" male & female HEADER SET .050" [1.27] CENTERLINE HSH & HFH SERIES MALE HEADER PCB LAYOUT Recommended PCB Layout B C C .050 [1.27] PIN 2 .130 [3.30] ø .026 [ø 0.65] .050 [1.27] PIN 1 .050 [1.27] Standard: With key & without peg .211 [5.35] A ORDERING INFORMATION A = .050 X No. of Spaces + .168 [4.27] B = .050 X No. of Spaces + .074 [1.87] C = .050 X No. of Spaces .213 [5.40] .094 [2.40] 50 HSH G PLATING G=Gold plated T=Tin plated SG =Gold plating in contact area, tin TOTAL plated POSITIONS solder tails 10 thru 100 SERIES INDICATOR HSH= .050" Shrouded Male header OPTIONS: SMT =Surface mount leads with Hi-Temp insulator P =Peg option (thru hole only) PIN 2 PCB LAYOUT C B C ø .051 [ø 1.30] .126 X .027 [3.20 X 0.70] PIN 1 .050 [1.27] .050 [1.27] D .211 [5.35] A .213 [5.40] Standard: With key & with peg A = .050 X No. of Spaces + .168 [4.27] B = .050 X No. of Spaces + .074 [1.87] C = .050 X No. of Spaces D = .050 X No. of Spaces + .120 [3.05] .039 [1.00] .016 [0.40] SQ. ø .039 [ø 1.00] PIN 2 .236 [6.00] ø .027 [ø .70] A B .050 [1.27] HSH-SMT Series Shrouded male header Recommended PCB Layout PCB LAYOUT .050 [1.27] B .050 [1.27] PIN 1 .050 [1.27] .025 [0.65] .144 [3.65] ORDERING INFORMATION 50 G PLATING G=Gold plated T=Tin plated SG =Gold plating in contact area, tin TOTAL plated POSITIONS solder tails 10 thru 100 SERIES INDICATOR HFH= .050" Female header OPTIONS: SMT =Surface mount leads with Hi-Temp insulator NP =No peg NK =No Key P =Peg option (thru hole only) Shrouded male header Recommended PCB Layout FEMALE HEADER HFH HSH Series .050 [1.27] .016 [0.40] SQ. Standard: With key & without peg .118 [3.00] A = .050 X No. of Spaces + .068 [1.73] B = .050 X No. of Spaces C = .050 X No. of Spaces + .120 [3.05] .173 [4.40] .106 [2.70] HFH Series .016 X .005 [0.40 X 0.12] Shrouded female header Recommended PCB Layout .054 [1.38] B A B .050 [1.27] ø .051 [ø 1.30] .126 X .027 [3.20 X 0.70] .050 [1.27] .016 X .005 [0.40 X 0.12] .144 [3.65] ø .047 [ø1.20] C www.adam-tech.com .118 [3.00] Standard: With key & with peg A = .050 X No. of Spaces + .068 [1.73] B = .050 X No. of Spaces C = .050 X No. of Spaces + .120 [3.05] .173 [4.40] ø .033 [ø 0.85] .050 [1.27] C .216 [5.50] HFH-SMT Series Shrouded female header 287