.100" PIN HEADERS .100" [2.54] CENTERLINE PH SERIES Introduction: Adam Tech PH Series .100" Pin Headers are a full range headers in a variety of configurations including Single, Dual and Three rows, Straight or Right Angle in Thru-Hole or SMT mounting. Their close tolerance .025" sq. posts are smoothly finished and taper tipped to eliminate insertion damage to the PCB or mating connector. Adam Tech Pin Headers can be easily cut into exact sizes as required. Options include stacked insulator versions and choice of tin, gold or selective gold plating. This series is compatible with all industry standard .100" pitch pin headers. Features: Single, Dual or Three Row Tin, gold or selective gold plating options Thru-hole or SMT mounting Stacked and Custom length versions available Versatile Breakaway design Hi Temp Insulator available Mating Receptacles: Mates with all industry standard receptacles accepting a .025" square post on .100" [2.54mm] centerlines Specifications: ORDERING INFORMATION Material: Insulator: PBT, glass reinforeced, rated UL94V-0 Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0 Insulator Color: Black Contacts: Brass Plating: U = Gold over nickel underplate SG = Gold over nickel underplate on contact area, tin over copper underplate on tails. T = Tin over copper underplate overall Electrical: Operating voltage: 250V AC max. Current rating: 3 Amps max Contact resistance: 20 mΩ max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V AC for 1 minute Mechanical: Insertion force: 2 oz lbs max. Withdrawal force: .75 oz lbs min Mating durability: 1000 cycles min. PH1 SERIES INDICATOR PH1=Single Row, Straight PH1RA =Single Row, Right Angle, High Profile PH1RB= Single Row, Right Angle, low profile PH2 =Dual Row, Straight PH2RA =Dual Row, Right Angle PH3 =Three Row, Straight PH3RA =Three Row, Right Angle Temperature Rating: Operating temperature: -40°C to +105°C Soldering process temperature: Standard insulator: 235°C Hi-Temp insulator: 260°C Packaging: Anti-ESD plastic bags Safety Agency Approvals: UL Recognized & CSA Certified, File no. E224053 40 POSITIONS PH1: 1 thru 40 PH2: 2 thru 80 PH3: 3 thru 120 U A MATING/TAIL LENGTH A =Mating Length (“C” dim.) = .235" Solder Tail (“D” dim.) = .120" B =Mating Length (“C” dim.) = .318" Solder Tail Length (“D” dim.) = .120" Special lengths available contact factory PLATING U= Gold flash overall V= 15 µin gold on mating area 100 µin tin on solder tail W= 30 µin gold on mating area 100 µin tin on solder tail T= 100 µin tin overall SG= Gold flash on mating area 100 µin tin lead on solder tail OPTIONS: Add designator(s) to end of part number SMT=Surface mount leads Dual row with Hi-Temp insulator SMT-A=Surface mount leads Type A with Hi-Temp insulator SMT-B=Surface mount leads Type B with Hi-Temp insulator HT=Hi-Temp insulator for Hi-Temp soldering processes up to 260°C (Add this option for thru-hole products only. All SMT products are manufactured with Hi-Temp insulators) 312 L=Low profile 1.50 mm insulator thickness www.adam-tech.com .100" PIN HEADERS .100" [2.54] CENTERLINE PH SERIES PH1 A = .100 [2.54] X No. of Positions. B = .100 [2.54] X No. of Spaces. SINGLE ROW .098 [2.50] PIN 1 ph1-16-ua A B Recommended PCB Layout C B .098 [2.50] D .100 [2.54] .025 [0.64] SQ. .100 [2.54] ø .040 [1.02] PH2 A = .100 [2.54] X No. of Positions per row. B = .100 [2.54] X No. of Spaces. dual ROW PIN 2 .197 [5.00] PIN 1 ph2-32-ua A B Recommended PCB Layout C B .098 [2.50] D .100 [2.54] .100 [2.54] .025 [0.64] SQ. .100 [2.54] ø.040 [1.02] .100 [2.54] PH3 A = .100 [2.54] X No. of Positions per row. B = .100 [2.54] X No. of Spaces. Triple ROW PIN 3 .295 [7.50] PIN 2 PIN 1 ph3-48-ua .200 [5.08] A B Recommended PCB Layout C B .098 [2.50] D .100 [2.54] .025 [0.64] SQ. .100 [2.54] www.adam-tech.com .100 [2.54] .200 [5.08] .100 [2.54] ø.040 [1.02] 313 .100" PIN HEADERS .100" [2.54] CENTERLINE PH SERIES PH1RB PH1RA & PH1RB - SINGLE ROW .098 [2.50] Single Row PIN 1 A B ph1rb-16-ua .153 [3.90] C C Recommended PCB Layout .098 [2.50] .100 [2.54] B .025 [0.64] SQ. D D PH1RA A = .100 [2.54] X No. of Positions. B = .100 [2.54] X No. of Spaces. .100 [2.54] ø.040 [1.02] PH2Ra A = .100 [2.54] X No. of Positions per row. B = .100 [2.54] X No. of Spaces. Dual Row PIN 2 PH2RA - DUAL ROW .197 [5.00] PIN 1 A B ph2ra-32-ua .100 [2.54] PCB LAYOUT C Recommended PCB Layout .098 [2.50] B .153 [3.90] .100 [2.54] .100 [2.54] D .025 [0.64] SQ. .100 [2.54] A = .100 [2.54] X No. of Positions per row. B = .100 [2.54] X No. of Spaces. ø.040 [1.02] PH3Ra Triple Row PIN 3 PIN 2 PH3RA - TRIPLE ROW .295 [7.50] PIN 1 ph3ra-48-ua A B .100 [2.54] C .098 [2.50] PCB LAYOUT Recommended PCB Layout B .153 [3.90] .100 [2.54] .100 [2.54] 314 .025 [0.64] SQ. D www.adam-tech.com .200 [5.08] .100 [2.54] ø.040 [1.02] .100" PIN HEADERS .100" [2.54] SURFACE MOUNT PH SERIES PIN 1 PH1 A = .100 [2.54] X No. of Positions. B = .100 [2.54] X No. of Spaces. .098 [2.50] TYPE B SMT-Single Row straight PIN 1 ph1-15-ua-smt-b .098 [2.50] TYPE A Recommended PCB Layout A B B .100 [2.54] C .098 [2.50] .100 [2.54 .130 [3.30] .216 [5.50] .197 [5.00] .025 [0.64] SQ B .100 [2.54] .039 [1.00] .039 [1.00] .079 [2.00] RECOMENDED PCB LAYOUT TYPE A SMT-A PH2 A = .100 [2.54] X No. of Positions per row. B = .100 [2.54] X No. of Spaces. PIN 2 SMT-Dual Row straight .197 [5.00] PIN 1 TYPE B SMT-B ph2-26-UA-SMT A B .100 [2.54] B .100 [2.54] .039 [1.00] C .098 [2.50] .100 [2.54] .130 [3.30] .295 [7.50] .025 [0.64] SQ. .315 [8.00] .079 [2.00] Recommended PCB Layout RECOMENDED PCB LAYOUT PH1RB A = .100 [2.54] X No. of Positions. B = .100 [2.54] X No. of Spaces. PIN 1 SMT-Single Row right angle .098 [2.50] A B ph1RB-10-ua-smt C B .100 [2.54] .039 [1.00] .098 [2.50] .180 [4.57] .100 [2.54] Recommended PCB Layout RECOMENDED PCB LAYOUT PIN 2 .197 [5.00] PIN 1 .079 [2.00] 0.154 [3.90] A B PH2rA A = .100 [2.54] X No. of Positions per row. B = .100 [2.54] X No. of Spaces. .100 [2.54] SMT-dual Row right angle ph2RA-20-ua-smt C B .100 [2.54] .039 [1.00] .098 [2.50] .180 [4.57] .216 [5.50] .100 [2.54] .079 [2.00] Recommended PCB Layout RECOMENDED PCB LAYOUT www.adam-tech.com 315 .100" PIN HEADERS Dual Insulator .100" [2.54] CENTERLINE DPH SERIES DPH-1 .098 [2.50] .098 [2.50] B .098 [2.50] B .098 [2.50] C C E E D .100 [2.54] .100 [2.54] B .217 [5.50] .100 [2.54] ø.040 [1.02] B RECOMENDED PCB LAYOUT DPH-2 .040 [1.00] Dph-1-12-u-.200/smt/.220-A Recommended PCB Layout Recommended PCB Layout .197 [5.00] .025 [0.64] SQ. .100 [2.54] .025 [0.64] SQ. RECOMMENDED PAD LAYOUT DPH-2-SMT A A .197 [5.00] .197 [5.00] .100 [2.54] B .098 [2.50] B .100 [2.54] .098 [2.50] C C E E D .100 [2.54] .100 [2.54] DPH-1-SMT .098 [2.50] A .098 [2.50] A .100 [2.54] .025 [0.64] SQ. B .100 [2.54] .025 [0.64] SQ. B .100 [2.54] .100 [2.54] .315 [8.00] .295 [7.50] .040 [1.00] .059 [1.50] ø.040 [1.02] Recommended PCB Layout RECOMENDED PCB LAYOUT Dph-2-22-u-.220/.100/.350 Recommended PCB Layout RECOMENDED PAD LAYOUT Dph-2-16-u-.250/smt/.300 ORDERING INFORMATION DPH 2 20 SERIES INDICATOR DPH =Dual insulator .100" centerline NO. OF ROWS 1=Single row 2=Dual row 3=Triple row POSITIONS 1 thru 40 (single row) 4 thru 80 (dual row) 3 thru 120 (triple row) A = .100 [2.54] x No. of Positions. B = .100 [2.54] x No. of Spaces. 316 SG .XXX"/.XXX"/.XXX" (C DIM) (D DIM) (E DIM) PLATING U = Gold plated T = Tin plated SG = Gold plating in contact area, tin plating on solder tails SPECIFIED IN INCHES AS: C Dim. / D Dim. / E Dim. (replace D Dim. with SMT for surface mount option) RECOMMENDED PCB LAYOUT www.adam-tech.com