MSS Series Silicon Schottky k Bridge Quad Diodes Description Features The Aeroflex / Metelics MSS CR Series of Schottky crossover quad diodes are fabricated on N-Type epitaxial substrates using proprietary processes that yield the highest FCOs in the industry. Barrier heights for LO power levels from 3 dBm to +17 dBm are available. • • • Available in four barrier heights Beam lead or packaged devices Hi-Rel screening per MIL-PRF-19500 and MIL-PRF-38534 available Absolute Maximum Ratings Parameters Rating Reverse Voltage Rated VBR Forward Current 50 mA Operation Temperature -65 ºC to +150 ºC Storage Temperature -65 ºC to +150 ºC Power Dissipation 100 mW per junction at TA = 25 ºC, derate linearly to zero at TA = +150 ºC Soldering Temperature (Packaged) + 260 ºC for 5 sec. Beam Lead Pull Strength 4 grams minimum Beam Lead Electrical Specifications, TA = 25 ºC Model VF VBR CJ NF RD RD TYP MIN TYP / MAX TYP TYP MAX Outline 20 25 B45 mV V fF dB MSS30, B46-B45 300 3 0.10 / 0.13 6 MSS30, B53-B45 270 3 0.20 / 0.25 6 10 15 B45 MSS40, B46-B45 470 3 0.10 / 0.13 6 20 25 B45 MSS40, B53-B45 430 3 0.20 / 0.25 6 10 15 B45 MSS50, B46-B45 530 3 0.10 / 0.13 6 15 20 B45 MSS50, B53-B45 500 3 0.20 / 0.25 6 10 15 B45 MSS60, B46-B45 670 3 0.10 / 0.13 6 20 25 B45 MSS60, B53-B45 670 3 0.20 / 0.25 6 13 18 B45 Test Conditions Revision Date: 05/20/05 IF = 1 mA IR = 10 μA VR = 0 V F = 1 MHz IF = 5 mA MSS Series Silicon Schottky k Bridge Quad Diodes Packaged Electrical Specifications, TA = 25 ºC VF VBR CT NF RD RD Model TYP MIN TYP / MAX TYP TYP MAX mV V fF dB MSS30, B46-E45 300 3 0.15 / 0.20 6 20 25 E45 MSS30, B53-E45 270 3 0.25 / 0.33 6 10 15 E45 MSS40, B46-E45 470 3 0.15 / 0.20 6 20 25 E45 MSS40, B53-E45 430 3 0.25 / 0.33 6 10 15 E45 MSS50, B46-E45 530 3 0.15 / 0.20 6 15 20 E45 MSS50, B53-E45 500 3 0.25 / 0.33 6 10 15 E45 MSS60, B46-E45 670 3 0.15 / 0.20 6 20 25 E45 MSS50, B60-E45 670 3 0.25 / 0.33 6 13 18 E45 Test Conditions IF = 1 mA IR = 10 μA VR = 0 V Outline IF = 5 mA F = 1 MHz Outline Drawings B45 ; = ; = 0LS E45 E45 (non-hermetic) # O M M O N # A THO D E Cp=0.07pF Lp=0.4nH 55 [1.397] SQ. 45 [1.143] ; = ; = 18 [0.457] 4 Pls 12 [0.305] ; = ; = ; = ; = 31 "A C K Epoxy "A C K 6IE W ; = ; = 0LS 5 [0.127] 4 Pls 3 [0.076] 50 [1.270] Max. ,E SS THA N ; = 14 [0.356] 8 [0.203] 80 [2.032] Min. Ceramic Aeroflex / Metelics Aeroflex Microelectronic Solutions 975 Stewart Drive, Sunnyvale, CA 94085 TEL: 408-737-8181 Fax: 408-733-7645 www.aeroflex-metelics.com [email protected] Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2003 Aeroflex / Metelics. All rights reserved. Revision Date: 05/20/05 attributes represented by these three icons: solution-minded, performance-driven and customer-focused. A17033 (-)